In menu list, anyone of the menu list name is showing blank after make some changes

Hi all,
I have seen this issue a lot of time.
device 8820,OS v4.2.1.x
In my application's popup menu list, anyone of the menu item from the menu list name is showing blank after make some changes.When I select blank field  that functinality is working.
Can anybody tell the reason of this issue?
Regards,
Ashutosh

Have a reset to your device by pulling the battery out for 30sec.
tanzim                                                                                  
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

  • Workflow status is missing from the List after make some change in workflow

    Hi,
    We have this strange situation where the workflow status is missing from List views. Here is the situation:
    Now if I check the All List view of this list, I can see these workflows that shows the status of the workflow - say "In progress", "Completed" etc.
    When i make some workflow modification and after i save and publish. The workflow status in List will missing.
    This issue happening  is intermittent.
    Why does this happen?
    Any workaround/findings for the above scenario are much appreciated.
    Thanks
    JWei

    Hi JWei,
    The workflow status column gets created when you first create the workflow and its first instance runs. The columns gets removed (and disappears from the view) if you delete the workflow or remove all instances of the wf on the list.
    Please check whether you created some lookup columns in this list. If yes, please increase the lookup threshold for that web application in Central Administration.
    Please create a new view which only contains the Title column and Workflow Status column, modify the workflow, check the workflow status column in the new view, compare the result.
    Please create a new list, create a workflow, and test again, compare the result.
    Please check if the link below is useful for you:
    http://naimmurati.wordpress.com/2013/11/11/workflow-progress-column-missing-in-a-document-library/
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    Hey there Logic Pro21,
    It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Verify that your computer meets the system requirements for Logic Pro X
    See Logic Pro X Technical Specifications.
    Test using the computer's built-in audio hardware
    If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
    Start Logic with a different project template
    Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
    Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
    If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
    Restart the computer.
    Isolate an issue by using another user account
    For more information see Isolating an issue by using another user account.
    Reinstall Logic Pro X
    Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
    In the Finder, choose Applications from the Go menu.
    Locate the Logic Pro X application and drag it to the trash.
    Open the Mac App Store
    Click the Purchases button in the Mac App Store toolbar.
    Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
    Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
    Click Install to download and install Logic Pro X.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
    LN

  • How can i stop or cancel the developer enroll process to make some changes ?

    I come to this point of the enrolll process where you have to choose your payment.
    But how can i go back to make some changes in the adress or phone site.

    The developer account address comes from the Apple ID used to sign up.
    You can change your Apple ID information at any time.
    You can't change the Apple ID you use to register.

  • HT1918 I changed the card and i want to know how make to change the data from itunes. I tried and doesn't work.

    I changed the card and i want to know how make to change the data from itunes. I tried and doesn't work. Please, Help Me!

    No. That's not what I said. You can get an out of warranty replacement, which will be exactly the same model, color, and will be locked in exactly the same way the original is. If you want an iPhone 5, get the 4S replaced, sell it, and use the money to put toward a new phone.

  • I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    It is hard to exactly understand what you have  done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
    Updating a Chart Copied from a Numbers Document
    If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
       Select the chart on the page and click the Refresh button that appears.
    Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
    I hope it has helped you.

  • I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, just one big clip,,,pls help, i need to make some changes to the project..thanx

    I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, text's, effects, etc..... just one big clip,,,pls help, i need to make some changes to the project..thanx

    Hi Stephen, thanx...
    Yes, we are talking about FCP X...this is the thing:
    I worked on a project a few days ago and went to share - export movie.
    Today, i opened the FCP again, to make some changes, and when i enter to the project, it shows me as one big clip.....i dont see it says compound clip....and i tried anyways pressing break appart clips...but nothing....could it be that i made it compound before exporting it..? if so how can i recover the un-compound version >?
    I tried to import the saved .mov file, but it opens the same....as one long clip...
    Pls help...thanx.

  • I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable

    I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable. What should I do?

    That means that you have to connect your iPad to your computer and you need to use iTunes to restore the iOS. Software. Read this for the instructions.
    iTunes: Restoring iOS software - Support - Apple

  • Why does the sign into iCloud prompt show up after every reboot?

    How do I stop this?  It shows up after every shutdown or reboot ever since I "upgraded" to Mavericks.

    No. Check your login items in the Users & Groups preference pane.

  • Sender make some changes to the data

    Hi,
    Could anybody please answer to this question. In file to idoc scenario, the data has been sent from sender(file) to receiver(R/3) . If the customer wants to make some modifications in the data is it possible to update the receiver system.How can it be achieved.
    regards
    Pavan

    hi,
    depends on what you post (on the kind of document):
    if the customer sends you sales orders via file - IDOC
    then you can just open the sales order in R3 and update it...
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Getting error when trying to deploy the SQL project after making some changes

    I’m getting the below error message, when I’m trying to deploy the project by making some changes.
    In detail, The project was deployed successfully at first time. Later I did some changes(Added 1 more table) and I tried to deploy, but it was not sucess. I'm getting the below error message
    Error message:Cannot upgrade the DAC for database CTR_FIN_FINNOTE_DB because the compatibility level is 70 or lower. Alter the database to support a compatibility level of 80 or higher
    I checked in SQL, the compatibility level is 110 which is higher than 70. 
    Can any one help me out to overcome with this.
    Regards
    Sk.

    Try to uninstall you application and then deploy again with the new changes.
    jdweng

  • List of downloads is blank after I changed the file to save to. How can I restore the list of downloads?

    I have already tried the all the steps in this link.
    '''http://support.mozilla.com/en-US/kb/Downloads%20window%20is%20blank?s=+downloads+list&as=s'''
    I have changed the file to save to back to the original one as well.

    Try opening the problem files using a text editor or file viewer to see what the first few bytes contain. All valid FM binary files for FM 11 will contain <MakerFile 11.0> in the first bytes of the file.
    When updating books, it's sometimes better to just to create a new book file and add the files to that.
    When renaming files in a book, changes at the system level will break any links/cross-references between files, so it's always best to use the Rename option in the Book file to change FM file names. This will maintain the correct linkages.

  • I just downloaded iOS 8 on my iPad air. This has caused the file names of all of my PDFs in iBooks to revert to their original file name when I downloaded the file, not the custom file names I gave them after downloading the files. In the list of fil

    PDF file names changed with iOS 8

    Further to above
    Progress Notable!
    But before I outline the details, I wish to apologise to APPLE for laying the blame at their doorstep for loosing or misplacing those PDFs I have on the iPad 1, when I set up my iPad Air , by restoring from the backup of iPad 1, thus copying all data from the old to the new.
    NOT REALLY THEIR FAULT AT ALL
    Because a lot of the many PDFs had the same name, ie PDF.pdf, probably my fault more than anybody else's, so I can't blame APPLE for that. Just goes to show one should be a little more precise in creating these portable documents.
    No wonder the poor program " lost its' marbles" when doing the updating and conversion/transfer.
    However, I was able to recover most of them by personal email, and extracting and RENAMING the PDFs as I located them in their new home.
    Those PDFs that we're locked an thus not email-able , I will deal with by
    Viewing
    Photoeing (if that's how you spell it).
    And re-building the PDF from the photos, in unlocked format, after transferring these files either by Bluetooth or Wi-Fi, from the old to the new iPad.
    So all is not lost, and I am thankful that my cautious approach to this matter in the first place, gave me the ability for this successful recovery.
    That's my story and I'm sticking to it.
    I hope this little story of my saga/experience may prove helpful to others yet to cross the chasm of updating.
    Regards to all, including APPLE.
    NICE STUFF YOU MAKE.

  • Recorded shows no longer list name of show, just name of episode - what's up

    On the web interface, I used to be able to see the name of the recorded show (e.g. NCIS) and multiple episode recordings were grouped under the name of the show.  Just noticed today that the name of the show is no longer listed on the web interface, just the name of the episode (which is not at all helpful in determining what show it belongs to.)  Anyone have an idea of how I can go back to what it was formerly.  Thanks.

    Hi Dan -- I sent you a private message to get more information about the problem you mentioned and your account.  Please get back to me when you're able.  Thanks!
    Karl
    Verizon Support
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Maybe you are looking for