In MI31 not shown all batches

Hi,
I have run MB52 with batch wise and i got list of stocks with batches then i want to comparision in physical inventory with batches so i run MI31 and comparision material with batches but all materials are not shown in MI31.
please guide me or missing any config we need this details.
Thanks
'Shital

Hi
There is no config missing. MI31 takes the stock of those materials, for which previously no Physical Inventory has taken place.
Just check those materials.
Reg
Manoj

Similar Messages

* in batch field is not displaying all batches based on criteria

Hi Experts,
I've done necessary configuration for batch determination. whenever am issuing goods using MB1A or MIGO, if I put * in the batch field, system is automaticlly selecting the batch . Eventhough that batch number is correct ,but I need, the system to display all possible batches and I want to select the same. how to achieve this.
thanks,
satish

Have you maintained any characteristics for batch determination.
If not, then system will not be differentiate between two batches and will pick up any batch when you put *.
However if charactertics are mainatined, system will be allow you to determine batch when you click drop down on batch ni.
Hope this clarifies all your queries.
Regards
Bhavesh Mistry

Not shown batch no in receipt from production

Hi
Experts
we issued the materials to production with batch numbers. but that production was rejected so we have to receipt the materials from that production order only in that time one item batch number was not shown when we take the receipt from production
Regards
Venkat.

Hi Venkat,
Show the Batch Number Transaction Report Ware house wise with Particular Item No. you have a issue.
Check Issue Ware house material are outgoing with particular Batch Number or not.
For that need to post this issue to SAP with this result and reference of note no.1250867 (Inconsistency of Items Managed by Batches / Serial Numbers )
=========
Solution
=========
In order to fix your database, please, log a support message via the Service Marketplace referring to this note including all relevant information and results of the attached queries.
Thanks,
Srujal Patel

I bought a new computer and tried to authorize it. It states that I already have 5 computers that are authorized. I no longer have any of those 5 computers. How do I deauthorize all of them, as it is not shown as an option, as my new computer can'

I bought a new computer and tried to authorize it. It states that I already have 5 computers that are authorized. I no longer have any of those 5 computers. How do I deauthorize all of them, as it is not shown as an option, as my new computer since it is not authorized.
Thanks

You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
For more information on authorization and de-authorization: iTunes Store- Authorize or deauthorize your Mac or PC.

Create batch input, does not include all records

Have anyone experienced, when doing Create Batch Input from the LSMW menu it does not include all rows.
For example I have a .txt file with 3000 records that I specify in "Specify Files"
"Read Data" reads 3000 records.
"Convert Data" Converts 3000 records
"Create Batch input Sessions" creates 2461 records? ?
I have noticed that this happen when the system is busy running many batches and Idocs.

I'm talking about LSMW programs with regular Batch input Recording.
I haven't noticed which transactions it skips since I do not run the Batch, when I notice that it does not include all rows as I have read and converted.
However usually if I "Create the batch input session" once again it includes all the records from the conversion before.
But since Create a batch input can take a long time depending on the amount of transactions it creates this is not a desired option.
So it is not possible that the transactions it does not create are errors since its possible to run them successfully. And I haven't used any SKIP TRANSACTION in the mapping step.
But like I said this only happens when the system is running many batches / idocs at the moment, for example if we are loading the material master at the same time as I run my batch input programs.

Qualifications not shown in all e-rec application / role

Hi,
we have created qualifications and they are shown/ accessible in some e-rec application roles, but not all.
So, I don't think the problem is to activate any feature.
The roles where qualifications are not shown are: Employee (Internal) and Internal Recruiter.
Does anyone have experience with the same type of issue, or have any documentation available?
Thank you!
Kind regards,
Hilde Bakkemyr

The button "New entry" is also missing from Qualifications, but not from "work experience", "edication" etc. Can this be a web service issue, if so, does anyone know what transaction and settings must be made?
regards,
hilde

All master data values not shown in query selections

Hi
I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
Then I deleted the contents of the InfoCube. It still shows the original 25 values.
The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
The problem is the same in LISTCUBE
I hope some of you can help we with this.
Thanks
/Karsten

Hi Hari
1) Reactivated the master data, said it was already active.
2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
Thanks for all the input guys.
/Karsten

When I select a page to bookmark all my bookmark folders are not shown so that I can enter the page in that bookmark folder.

I have a list of bookmark folders. When I want to bookmark a page I select "bookmark this page" but not all of my folders are shown. If the folder is not shown I can not get it to be filed in that bookmark folder. How can I get all of my bookmark folders to be shown. When I go to show "all bookmarks" and select "bookmarks menu" all are shown. I am using firefox 8.0.
I have updated to firefox 8.0.1, did not change the problem. When I show all bookmarks I have 11 folders but when I try to bookmark a page only 5 folders are shown not all 11, why?

The problem is that not all of my bookmark folders are shown when I want to bookmark a page. They are shown when I "show all bookmarks" Ctrl+Shift+B but not when I want to bookmark a page. The article how to use bookmarks does not solve my problem. The folders are not shown so I can not use them. Why?

HT4483 All my purchased app are not shown under "Purchase" in Mac App Store

Hi,
All my purchased app's are not shown under "Purchase" in the Mac App Store window. I have changed computer and need to re-install some of my purchased apps on my new computer but cannot find them. Please advice

Two things may be behind this. I see you have changed your computer. Did that entail you changing your ID? And there is also the possibility they have become hidden.
Mac App Store: Finding your purchased apps
iTunes Store: Hiding and unhiding purchases

0ORGUNIt time dependent hierarchy not showing all valid nodes in BO , but in BW its correctly shown

Hi All,
We have 0ORGUNIT hierarchy shown in one of the Webi reports. 0ORGUNIT is time dependent hierarchy.
In BW report we can see below nodes for hierarchy
Hierarchy                     Valid From         Valid To
Z05 Root Company        01.07.2013        31.12.9999 - Parent node
    Z05 Branch 2                 01.10.2013        31.12.9999 - Child Node
    Z05 Division                   09.12.2013        31.12.9999 - Child Node
In BO webi we can see only two nodes
Z05 Root Company        01.07.2013        31.12.9999 - Parent node
       Z05 Division                   09.12.2013        31.12.9999 - Child Node
Any idea why in BO webi the other node is not shown ? This is happening only for time dependent hierarchy and only in BO not in BW.
Thanks,
Shraddha

Hi Shraddha ,
Check at webi query panel level any restrictions applied to hierarchy levels.
Check at BEx query level,select 0ORGUNIT ,hierarchy -Expand to level .
Here specify Max level.
lastly, check any filters/restrictions applied on data.If yes,remove restrictions.

TS1347 I have a iPhone 4 and I use a hotmail email account. Recently it's not been notifying me of me of emails. I've checked notification settings all set to get them but when you look at overview of notifications the email ones not shown like other apps

I have a iPhone 4 and I use a hotmail email account. Recently it's not been notifying me of me of emails. I've checked notification settings all set to get them but when you look at overview of notifications the email ones not shown like other apps do? Can anyone help its driving me mad?

I had the same issue. I just went to the Apple Store today to talk to someone about it. They had me delete the account and then add it back in. It's been working fine ever since!

Capture a specific window with all the data even those that is not shown

Hi,
I want to capture a specific windows with all of its data, even the data that is not shown and the user have to scroll dpwn to see it.
i already did and manged to capture all of the screen with the Robot class, but i need more.
thanks,
Eitan.

Hi,
I want to capture a specific windows with all of its data, even the data that is not shown and the user have to scroll dpwn to see it.
i already did and manged to capture all of the screen with the Robot class, but i need more.
thanks,
Eitan.

Updated ipod touch to ios 6.1 and now all the videos in playlists are not shown. What to do??

Updated ipod touch to ios 6.1 and now all the videos in playlists are not shown. What to do??

Thanks !
The only thing I didn't do right is that I didn't Erase all content from iPod... I did it from iTunes...
Technique worked for me !

Some fonts are not shown correctly in LabVIEW 2012

I found a bug related with fonts in LabVIEW2012 f3 KR.
- When I select NI7SEG in font selection dialog, right font is not shown in the example box.
- Draw text at point.vi shows same problem for some fonts while other fonts are working.
I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google.
So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK.
* OS: Windows 7 32bit KR

Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana

Using tab groups but Firefox 28.0 crashes and even can not save all tabs in archive recently

Hi. I installed tab groups addon on my firefox 28.0 (firefox portable version) and each group has its tabs. of course. Problem is that Firefox crashes when i work on a group with the tabs and even can not save all tabs in archive as MAFF recently too. When i try to save all tabs in archive as... i choose the name and hit save and wait but after some time this crashes too. Last time i saved all my tabs and groups as MAFF or other file was end of april and since then i can not save them anymore because of the crashing.
I read on the help site to delete Firefox then reinstall ect. to fix problems but I DO NOT want to erase my groups with their tabs as i chose this solution working with group tabs as it would be to hard on my cpu when i use for each group a different browser for example.
Please help me fix this problem with the crashes but without loosing my groups and its tabs as they are all important and do not wish to erase them as i use them all.
Thanks and hope for a soon reply :)

Can you give me your crash reports?
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.

In MI31 not shown all batches

Similar Messages

Maybe you are looking for