In MIGO quantity & Item OK check box should be supressed for 543 movement

Dear all,
I am doing Subcontracting goods receipt. when the item OK check box for the PO item with movement type 101 is checked, it automatically applied for the line items with movement type 543.
But the quantity & Item OK check box can be edited for the line items with movement type 543. I want to suppress the same only for line items with movement type 543.
So the quantity consumed of the send items will be same as per BOM quantity.
How to do this?

Hi,
In SPRO- MM-Inventory Management-Setting for Enjoy Transaction-Setting for Good Movement - Field selection per Mvt type ,add the neccessary fields and select the radio button "Suppress"
Thanks and Regards,
Maheshwari

Similar Messages

  • Need detailed procedure on how to add an item with Item Style Check Box in

    Need detailed procedure on how to add an item with Item Style Check Box in Framework.

    The view instance should be the same as the view instance (view object) specified for your region.
    If the View Attribute already that you need already exists in the View Object then you can use it.
    Otherwise you have to extend the View Object and add the new attribute to it.
    --Prasanna                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Item Partners Check box in Sales Order

    Hi all,
    What is the functionality and configuration settings of Item Partners Check box in sales order, partner function tab line item level?
    When i find the check box marking then it allows me changes by double clicking of the partner and changing the address, but when the same check box is not marked then it is in dispaly mode when i double click it.
    So please suggest me how to control its features.
    Thanks in Advance,
    Cheers,
    Anil.

    Hello,
    If this indicator is activated, the partner is validated at item level.
    It may happen that in a business transaction the partner in the document header does not apply to all items, for example, if specific goods for a customer are normally delivered to another ship-to party.
    In sales documents and billing documents you can enter one of the deviating partners from the document header at item level.
    When creating a document , the system copies the document header partners to the items. If you want to define another partner than the one in the document header at item level, overwrite the proposal from the item partner screen.
    Prase

  • Open Item Management Check box for GL Account

    Hi,
    I need to activate Open Item Management check box for one GL Account. But it is not accepting since few postings were there in that GL Account.
    Kindly help me how to activate Open Item Management Check box for GL Account.
    Thanks
    KB
    Moderator: Please, search SDN before posting; this question has been answered dozens of times

    Hi,
    Check the below link. It might be useful for you.
    Open item management status change
    regards,
    Radhika.

  • Set the value of items when check box is checked

    Hi,
    My requirement is when we click a check box it should set the value of an item as 111111 and clear the values of two items in an apex page.
    I used java script onClick event to set those items using document.getElementByID('Item_Name')='';
    One of the item which needs to be cleared is a conditonal type.
    When the condional item present, java script works fine. But if it is not present,
    code works but it shows "error on page" for few seconds.
    Is it possible to clear the item, only when the item is present in the page.
    Thanks,
    Ravi

    Hi,
    Yes e.g. like
    if($x("ITEM_NAME")){
    $s("ITEM_NAME", "");
    }Regards,
    Jari

  • How to change status of open item management check box??

    Dear Members,
    There is a GL which was not defined as Open Item Management Previously.
    Now we Identified and we wanted to define it as Open Item Managed account.
    For ex take ..Payable Account
    say there is one line item with credit balance ..to make this accoount balance as 0 (ZERO)  ..we reversed the original entry ..we tried to select open item check box..
    but system is not allowing us to change ..instead its giving msg"Account balance is zero but stil open items exists"
    i dont understan this ..
    now how to solve this problem
    thanks & regards.

    Hi suja csc,
    Thanks for the points : )
    OK it's very easy to transfer the balance. Either u have already customised program to upload data or if the data is "little" u can just manual posting using FB01. just zerorise all balances in the old account.
    Eg. old journal:
    01  MAN        NIAGA SDN.              1,975.00 
    50  80070010   Rental-Car Park              1,975.00-
    To transfer:
    17  MAN        NIAGA SDN.              1,975.00-
    40  80070010   Rental-Car Park              1,975.00
    Means, the account will be zero.
    Hope this will help you.
    TQ
    Regards,
    Nazrul

  • Can't use LOV with item type "check box" in form

    I have created a LOV that I want to use with a form application in 3.0.9. I need to be able to do multiple choices in this LOV (check box style) in the same query (only queries - users won't be able to update this field)
    When I choose Check box as the item type in the form wizard I am not able to choose the LOV. I have to use combo box, popup or radio group for the LOV choices to appear, but then the query can only query for one value in the LOV at a time.
    Is there a solution to this?

    Hi,
    This feature is not supported as of now. You cannot have multi select LOV for a form field and hence a checkbox cannot have a LOV.
    Thanks,
    Sharmila

  • How to use Multiple Check Box control  to make a list of items in check box

    I have a use case where i have to save update list of items required, and i want to implement it through viewobject and use Multiple check box control, how do i go about it? Code snippet will be helpful........
    Edited by: jDev_08 on Nov 17, 2012 8:31 PM

    Hi,
    Always mention your JDev version.
    Check out the ADF Faces Demo : http://jdevadf.oracle.com/adf-richclient-demo/faces/components/index.jspx#%2Fcomponents%2FselectManyCheckbox.jspx (Hint : Code snippet is available in there itself).
    -Arun

  • Check box  in ALV Header for selection

    Hi,
    I'm working on ALV in ABAP web dynpro. We have a requirement to check some rows and based on the selection a FM should be executed.
    I've used checkbox in the column for selection. Is there anyway to use a check box (or any element)  in the column header and use that to select all.
    I checked the ALV column header class documentation but didnt find anything that allows UI elements in header.
    Any workaround to tackle this?
    Thank you,
    Vasu

    Hi Thomas,
    I've already done that (in toolbar).  Checking if there is some hidden option that I missed to do this. Looks like there isn't

  • Subcontract GRN - disable quantity field for 543 movement type

    Dear All,
    1) while making the GRN for subcontract PO the raw material will get consumed by 543 movement type but here the field is editable and we need to make it uneditable
    2) also if you might have observed that raw material qty will be calculated as per ratio but if i change the semi-finished matl qty the consumption qty of RM is not amended immdiately and if we need to take as per ratio in PO, we need to close the line by pressing " + " and amend the semi-finished qty and system will calculate the ratio and you can check by again pressing "+"
    this is certainly not desirable and we need the change in RM qty immedietely after changing semifinished goods qty.
    Please suggest me how to make it without help of ABAPER.
    Regards,
    Vimlesh

    Hi,
    Saying with regret that it is not possble in standard SAP .we had faced the same problem at my cleint side.We had gone for a custom development where the quantity field against the Input material will be not editable .
    Regards
    Sandeep

  • Reg: Item ok check box in MIGO

    Hi All,
        Could some one tel how / wer to make the item check in MIGO as mandatory in item tab .. In standard the it would be mandatory in detail data but while doing subcontracting the user is allowed to remove the check(tick mark ) in item column for the child material and it is allowing to post the document.
    hope it is clear ....
    if not i shall better clarity further
    reg
    AV

    That means if you select it then it will be considered and of deselect then deleted that is nothing but Iten OK indicator only.
    Input means optional entry that means it is up to user whether he wants to select indicator or not and required means user has to select it.
    If it doesn't work then use t.code:SHD0 & proceed by entering MIGO Transaction Code.
    Here activate Item OK indicator and make it display so user will not be able to change it in MIGO
    Also you can use function in MIGO, click in menu Settings > Default Values
    Here activate "Propose the Ok Function in Future", Item OK will get defaulted in MIGO everytime, user has not to activate it during MIGO.

  • Doc Curr and Item Cond. Curr should be same for SO Creation

    Hi Experts ,
    I have an requirment as while creating SO the Document currency and Item Condition Currency should be same otherwise it should not allow to SAVE the SO.
    This type of senario becomes when in costomer master it is maintaned as some other currency like INR but for condition it is maintained in transaction VK11 which is mantained in other currency like USD.
    at this situation OS Document currency will be inINR but Item Condition Currency will be in USD and its allows to Save in SAP Standard procedure.
    I need to stop it here untill they will change the Condition Record OR Cusmer master Record.
    Thanks & Regards,
    DTK

    Hi,
    I think you can place your checks in MV45AFZZ subroutine USEREXIT_SAVE_DOCUMENT_PREPARE.
    Compare the currencies and issue error accordingly. But i hope this is the standard SAP functionality where in the automatic conversion happens with appropriate exchange rate.
    Thanks,
    Vinod.

  • What resolution should i take for a movie to be played on 70X20 LED display?

    I am working on an animated video that will be played on 70X20 Feet LED display. What resolution should i take?

    size of the screen is 80640 X 23040 (in pixels)
    You are going to need a monster to playback something like that. Are you sure? The max comp size in AE is 30,000 pixels. Your specs claim a requirement for 80,640 which is about 20 4K displays.
    The data rate for a comp that is 42 times wider than HD would be crazy and probably require an array of high end server grade machines and fiber optics to push even 20 fps video through the system.
    As I said before, you MUST contact the manufacturer for their exact media specifications.

  • What setting should I use for exporting movies?

    Hi
    I've read quite a lot of posts on these forums - I am getting
    the dreaded whitespace instead of the movie I want to see on my
    webpage.
    I created an flv from Premier Pro, put it in Flash CS3 +
    exported a SWF. the SWF plays fine in Flashplayer 9 and when I
    select 'play' in the properties bit in Dreamweaver CS3.
    I used the 'insert movie' option (just using the flv) at
    first in DW but could not get it to work - despite making sure the
    Scripts file was uploaded. So I went with the old fashioned bit of
    script and used a Flash created SWF.
    I uploaded a swf i didn't create to test and that did display
    correctly in IE etc. This makes me wonder if I am doing something
    wrong in Flash. should it be as simple as file>export>export
    movie>OK?
    Grateful of you help. The morning has just disappeared trying
    to figure this one out...

    I still had a copy of Flash MX 2004 installed, so i created a
    swf that i was able to publish successfully from - well - the
    output ran slow. This suggests i am still doing something wrong at
    the publishing stage.

  • Check Box in Header of ALV GRID only............

    Hi Experts,
                   Can anyone help me out... in keeping the Check box at the Header Level.....
    This requirement is in the copy of the standard transaction "ME2N". 
    1. In ME2N when you click on the Chage Layout button of ALV grid
    and choose "Sorting" tabe.
    2. Add any 3 fields say 1. Vendor/Supply plant 2. Purchasing group and 3. Purchasing document in the Sort criteria and choose accending order radio button and check box in the sum .
    3. Now click on the Displayed Column tab and remove the above 3 fields from the Displayed colums and add it column set
    4. Now report shows the heirarchial one in the sorting manner.
    5. I want the Check Boxes at all levels both in the header and the item level.
    When I click on the Header level check box all the item level check box should get checked. When I add the check box in the field catalog I am able to see the check box in the item level only because only item level data appears in the internal table and Header level is displayed based on the ALV grid sorting option and that row records are unknown in the internal table.
    Is there some thing which I can do to get the check box at the header level retaining all the functionality of ME2N and ALV GRID.....
    It would be great help if some one solves me this issue... Points will be awarded.
    Br,
    Laxmi.

    Hi Bharath,
               Thanks for your response. Select ALL already existing... My requirement is not to get the whole report records selected at  particular level all items and header should get selected. Say for example  I have Vendor2 i.e,  vendor 1 and vendor2. So in the Vendor 1 i will have Purchasing group1 , Purchasing document 1 and say 10 items under Purchasing document. say same as like in Vendor2. So if Click on the Vendor1 all the sub items of it have to selected so that I can perform further action only for these items not for the enter items of the report.
    Br,
    Laxmi.

Maybe you are looking for

  • Is there any way to prevent double booking?

    It appears that I can schedule a event on top of another event (for the same time slot) without any problem. Is there a way to prevent this? <P> No, there is no way to prevent it. Double booking is allowed. Look for the option to disallow double book

  • JAI problem

    Hi all, I have small problem. In my application I'm using JAI package (imported). When I run my app in Eclipse, everything works perfectly. But when I compile this app to JAR file (Export to JAR), I have error in console as follows: java.lang.NoClass

  • Problem in XML generation

    Hi All, I am new to SNC consulting, currently i am learning the Purchase order Process of SNC. I created plant, material, Vendor and info records in ECC 6 and ciffed these data to SNC 7.0 system. After this i created a normal PO in ECC and an IDOC of

  • Render and record, export to tape question?

    Hi, I have finished a ten minute HDV project. I now want to export to tape. (HDV Sony V1e) When I hit export - tape then hit the render and record box. This then brings up the Export to HDV (transcoding to HDV) box. The problem I have is that 10 min

  • Prevent .ichat files in Recent Items

    Hey all... Just started using iChat over Adium. So far, so good... but I'm noticing in my "recent items" (under Apple menu), it's filled up with .ichat files. Is there a way to preclude .ichat files from showing up in Recent Items? I rarely need to g