In MIGO transaction Transfer posting user exist or BADI or Enhacements

Hi Experts,
Could you please help on this issue.
My requirment is, In MIGO transaction code, Transfer Posting (i.e., Storage location) screen, in item level there is Transfer posting tab From and Dest two sub screens are there.
if user enter material , plant and stoargae location in From side and that will be same maintain in Destination side.
If any user will change in Destination level Material or Plant or Stoarage location, I need to populate the error message.
Could you please tell me BADI or user exist or Enhacement for this requirment.
I have serached in SDN and debug the transaction code MIGO. I didn't found user exist and enhacment.
Thanks
Srinu

HI ,
If i tried this Enhacment MB_MIGO_SC. I have put break point and it is not triggering, when i am saving/ Checking the postings in MIGO transaction code.
Thanks
Srinu

Similar Messages

User Exist or BADI to restrict cancellation of Excise Invoice..!!!!!

Hi,
After Creation of Commercial Invoice or MIGO the excise invoice should not be canceled , We are using following doc flow for creation of excise invoice
Delivery - - > Proforma Invoice - - > Excise Invoice - - > Commercial Invoice.
So what should we use ( User Exist or BADI ) to restrict cancellation of Excise Invoice ???
T-code : J1IIN
Ankesh

I think you are very much aware of forum rules and still posting
duplicate threads.
Do you want to be a guest of julius ?

Cj12 User Exist and Badi's

Hi Experts,
As per my bussiness requirement , I need user exist or Badi requied for a Transaction Code CJ12.
In Transaction Code CJ12 , when i select system/user status button click , another window will come , in that I have status with status no screen, any radio button select then the below screen Status w/o status no screen , as per my requirement radio button select.
This is my requirment , I have to satisfy the two condition . So please help me on this which user exist or badi's are avilable for this Tcode CJ12.
Advance Thank you.
Thank You
Srinu

Srinu,
this is the program SAPLCJWB fro CJ12.
open the program and look for call customer-function that displays all the user exits
Thanks
Bala Duvvuri

Want User Exist or BADI when PO created and saved in database

Hello Experts,
I want User Exists or BADI, when PO saved in database table. That is, after Successfully Created message, want user exist or BADI in 4.7 server.
Thanks & Regards,
Poonam.

Hi Friend ,
Here is the User Exit & BADI for Purchase Order on save .I hope it will solve your Query
User exit create project in CMOD : MM06E005
BADI in SE18 : ME_PROCESS_PO_CUST
For more Information please see this SDN LINK : [ME21N / ME22N SAVE Userexit;
Regards,
Edited by: Loganathan girishkumar on Nov 5, 2009 4:31 AM

MIGO Automatic Transfer Posting (Mvt 101 ) to (mvt 301)

Hi Experts,
    My requirement is : MIGO - once performed goods receipt (MvT 101) in receiving plant then transfer posting will perform automatically MB1B (MvT 301) to destination plant/ storage location based on shipping address.
This should transfer after updating tables (which is after save for Mvt 101 ). For this I got 1 Badi ' MB_DOCUMENT_BADI'.
I have used methods MB_DOCUMENT_UPDATE   and 1 User Exit mb_CF0001 (EXIT_SAPLMIGO_001 or EXIT_SAPMM07M_001 ).
These 2 will trigger after updating tables, but the problem is tables are locked especially plant table, so my BAPI BAPI_GOODSMVt_CREAte is throwing error (says plant is locked).   I even tried DEQUE_ALL still unable to unlock tables. when I come out of these 2 spots then only tables are unlocked by SAP.
Appreciated for right answer.
Regards,
Sri
Edited by: srijaS on Aug 17, 2009 1:08 AM
Edited by: srijaS on Aug 17, 2009 1:09 AM

Try calling Bapi with 'IN UPDATE TASK' or 'IN BACKGROUND TASK "

Problem with MIGO Transaction, while posting PO with quantities 0

When I try to post a PO using MIGO, with one or more quantites 0, the output type is not appearing in VL03N. An output type "OPOD( Proof of Delivery)" will appear if all the quantities of the posted PO is greater than 0 !!
How can I resolve this ? Points will be rewarded for useful answers.

Hi Naveen,
Thank you very much for the suggestion. I'm not much familiar with the MM module. Could you please give me some clue on where to find the check box ?

Transfer Posting with MIGO.

HI,
I need to do a transfer posting to post some of the materials using 541 mvt to my Subcontracting Vendor. When i am able to do it with MB1B , i am able to access with reference to PO whereas in the enjoy transaction ( MIGO ) with Transfer posting, i am able to see only reference documents such as material document, Reservation and Others.
If i want to add one more reference to the Transfer posting function how to go about.
Please expedite.
Regards,
RitiG

Hi RitiG,
                                                                                Unfortunately, as you have seen, the only two available references to post a Transfer posting with MIGO are 'Others' and 'Reservation'.
This is, it is not possible to post a transfer posting in MIGO with reference to a Purchase Order. This is the standard behavior and it cannot be customized.
If you wish this option to be available to transfer stock to your subcontracting vendor (using the movement type 541), then, you will need to make this posting via the business transaction 'A08 Transfer posting' - 'R10 Others', but then you will not have any reference to the Purchase Order.
Alternatively, you can use transaction ME2O, which uses this reference to the Purchase Order, or you can continue using MB1B.
Best regards,
Esther

Asset Transfer posting ABT1N

hI,
while working with transaction ABT1N Asset transfer posting from existing (comp code) asset to new (comp code) asset with
Document, posting, asset value date -> this will be the same date 1.1.2011,
system gives error message" You cannot post to asset in company code 'abcd' fiscal year 2011.
After that
I changed the Document, posting, asset value date -> this will be the same date 20.11.2011, system gives error message "
Account 20900000 does not exist in company code 'abcd'.
Please resolve the issue both the scenarios.
Thanks,
Sahara.

please search. the "account does not exist" error has been dealt with previously.

Create a subsequent Goods Movement for a transfer posting

Hi Team,
I have a scenario where the users will create a Good Movement document for transfer posting. The Stock of Material "A" is transferred to stock of Material "B" using the movement types 561 etc. Now the quantity is reduced from unrestricted stock of "A" and posted to "Stock in Transfer/Transit" of "B". The requirement is to create another Goods Movement document immediately after the above transfer posting is completed and use movement type 101 to post the same quantity to unrestricted of "B".
I tried searching for use exits and could not find a relevant one "After Save" for goods movement online transaction. I found the MB_GOODS_MOVEMENT_UPDATE Badi but don't know how to create another goods movement document while in the update task. I'm concerned that if I call a BAPI or BDC inside the update task, it might conflict with the current transaction (transfer posting). Looking for your guidance.

Hi Deepali,
You can use the userexit ' ZXMCBU02 ' to write your own code. This user exit gets triggered for almost all the goods movement transaction.
There is also a very similar BADI which you can use which gets triggered for every goods movement transaction.
I would like to know the BADI feel free to let me know. I think the above user exit should server your purpose.
Hope this is useful for you.
Cheers
VJ

Transfer posting from one GL account to another

Hi,
For a GL account which is not open item managed, now have to check the "open item management".
since it has the amount, so i can not do it.
But i read the following help message.
If you want to switch this function on retroactively for a certain account, you should create a new account with the correct setting and use this to make a transfer posting of existing items.
so, after creating a new GL account with correct settings. How to Transfer the posting of the Existing items?
Thanks in advance,
Swetha

Hi all,
i posted a document in F-02 by debiting the new GL account and crediting the old account.
now, the balance of the old account is Zero.
but still can not save it by checking the " open item management" because it says as below.
"Account balance = 0 but open items exist in the account
The data contains error, you cannot save"
so, by making zero also we can not change the that Chcek box.
and another option you all suggested is transfer of the posting to new Gl account.
since the old account is not open item managed, so i can not follow this option also.
and one more, have to come across this kind of issue?
then how did you solve it.
Please share your finding.
Regards,
Swetha

Final Internal Table used in MIGO Transaction

Hi Experts,
I need to know the final internal table used in the MIGO transaction. Why I want to know this is, I need all the records which are there in the table control (GODYNPRO) of the MIGO transaction. I have used the BADI BADI MB_MIGO_BADI to read the values. But since it is a table control the values are getting changed when the user scrolls down the table control. How can I get all the values shown in this table control. Is there any global internal table in the SAPLMIGO program?
BR.

Hi ABAP,
Check the BADI MB_MIGO_BADI the example class CL_EXM_IM_MB_MIGO_BADI
In attributes tab variable GT_EXTDATA contains all migo positions.
Read the internal table to check items.
in this method the internal table is filled.
Therefore define your internal table in the class attributes.
I hope you help.

Additional fields in MIGO transaction

Hi Everybody,
We have a requirement where we need to have additional fields in MIGO transaction when the user chooses 'distribute qty' option to split the quantity, the normal screen shows the following fields,
1. Qty in UnE
2. Stock type
3. Movement type
4.Stor location, we need Serial number, Drum number in Screen number 1000 of SAPLMIGO program, Can any one tell me how do I achieve this functionality,
Rgds,

The only option I see is design your own custom screen with the required fields and call it as popup ( Modal Dialog Box ) from user exit ZXMBCU02 .
This user exit will be triggered when you click on "CHECK" or "SAVE" button.
There is no way to modify MIGO screen itself , so maybe you will have to pass the item number etc from MIGO and have a table control on your custom screen for data entry.
For saving data into database donot use this exit as a user may just check and go out and you will unnecssarily push the data into z table . In this exit do an export to memory for your custom fields.
In another exit ZXMBCU01 , do an import from memory and update the required Z table . This exit is called while updating material document in update task.
However to goto popup screen for displaying chnaging custom fields you will have to press "CHECK" button , maybe a user training issue.
Cheers

EXIT NAME OR BADI FOR FIELD IN MIGO TRANSACTION (full poins will be given)

Hai all,
VERY URGENT REQ.
In MIGO transaction, I want to know the BADI or EXIT NAME in which the following fields are avilable .
Fields name: exgrp, EXCISE_ACTION
exact screen field name is : J_1IEXHEAD-EXGRP
J_1IEXHEAD-EXCISE_ACTION
Full Points will be given for correct answer.
Thanks in advance.
s.senthil kumar

Hi,
Try this code .We can get the User exits and Badis for the Tcode.
Code:
& Report ZPJA_PM002 (Ver4) &
& PJA Consultancy Services (www.pjas.com) &
& This report attmpts to find Enhancements, Program-Exits, BADIs &
& and Business Transaction Events in a particular program/tcode. &
& Other search options: &
& Program: RPR_ABAP_SOURCE_SCAN &
& FModule: &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 221.
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_fsel like sy-ucomm, " Determination of screen field
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description',
c_col6(8) type c value 'Project',
c_col7(1) type c value 'S',
c_col8(12) type c value 'ChangeName',
c_col9(10) type c value 'ChangeDate'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of ty_mod,
member like modact-member,
name like modact-name,
status like modattr-status,
anam like modattr-anam,
adat like modattr-adat,
end of ty_mod.
data: w_mod type ty_mod.
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(60) type c,
modattr type ty_mod,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
types: begin of t_enlfdir,
area type enlfdir-area,
end of t_enlfdir.
data: i_enlfdir type standard table of t_enlfdir with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc 0.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
store function groups
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
i_enlfdir-area = wa_enlfdir-area.
append i_enlfdir.
Store development classes
if not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
endif.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
sort funtion groups
sort i_devclass.
delete adjacent duplicates from i_devclass.
sort i_enlfdir.
delete adjacent duplicates from i_enlfdir.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
check i_submit-pname ne p_pname. " ensure not the same as origianl program
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc 0.
delete i_submit.
continue.
else.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''.
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''.
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IDOC'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
read table i_fmodule with key name = i_fmodule-name.
if sy-subrc 0.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
MOH - enhancement to get the project name
clear w_mod.
select single modactmember modactname modattr~status
modattranam modattradat
into w_mod
from modact
inner join modattr
on modattrname = modactname
where modact~member = wa_modsapa-name
and modact~typ = space.
i_userexit-modattr = w_mod.
MOH - eoe
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name = wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
Get IDOCs
loop at i_devclass.
endloop.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(60) c_col5, "Enhancement description
sy-vline,
(8) c_col6, "Project
sy-vline,
(1) c_col7, "S
sy-vline,
(12) c_col8, "ChangeName
sy-vline,
(10) c_col9, "ChangeDate
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(60),
sy-vline,
i_userexit-modattr-name,
sy-vline,
i_userexit-modattr-status,
sy-vline,
i_userexit-modattr-anam,
sy-vline,
i_userexit-modattr-adat no-zero,
sy-vline.
hide: i_userexit-type,
i_userexit-txt,
i_userexit-pname,
i_userexit-modname,
i_userexit-modtext.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
write: 157''.
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
& User Selection Processing &
at line-selection.
get cursor field w_fsel.
case w_fsel.
when 'I_USEREXIT-MODNAME'.
case i_userexit-type.
when 'Enhancement'.
set parameter id 'MON' field i_userexit-modname.
call transaction 'SMOD' and skip first screen.
when 'BADI'.
check i_userexit-modname ne 'Dynamic call'.
set parameter id 'EXN' field i_userexit-modname.
call transaction 'SE18' and skip first screen.
when 'BusTrEvent'.
submit rfopfi00 with attr_typey_selm = 'A'
with event = i_userexit-modname(8)
via selection-screen
and return.
when others.
endcase.
when 'I_USEREXIT-PNAME'.
check i_userexit-modname ne 'Unknown'.
w_off = 0.
find '/' in i_userexit-pname match offset w_off.
if w_off = 0.
set parameter id 'RID' field i_userexit-pname.
call transaction 'SE38' and skip first screen.
else.
w_off = w_off + 1.
w_prog = i_userexit-pname+w_off.
set parameter id 'RID' field w_prog.
call transaction 'SE38' and skip first screen.
endif.
when others.
endcase.
Thank You,
Saritha

BADI for MIGO transaction in ECC 6.0

Hi All,
We are upgrading our SAP R3 from 4.6c to ECC 6.0.
In the new system, Transaction SE18 now has two options
1. Enhancement spot
2. BAdI Name
When I display my BADI MB_DOCUMENT_BADI
Attributes tab shows BAdI migrates to enhancement spot MB_GOODSMOVEMENT
When I display Enhancement spot Technical details Tab shows Enhancement Implementation Status shows "Initial".
We have implemented this BADI in our 4.6c version. And its triggering when I run MIGO transaction.
In the new system BADI is not triggering when I run the MIGO.
Above is the only difference I found in the new system when compared with our old system settings.
Can any one suggest me what all the things I need to take care to get working this BADI
Thanks,
Satish

Hi satish,
Pls check here,
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
Cheers
Hareesha k

EXIT NAME OR BADI FOR FIELD IN MIGO TRANSACTION

Hai all,
In MIGO transaction, I want to know the BADI or EXIT NAME in which the following fields are avilable .
Fields name: exgrp, EXCISE_ACTION
exact screen field name is : J_1IEXHEAD-EXGRP
J_1IEXHEAD-EXCISE_ACTION
Full Points will be given for correct answer
Thanks in advance.
s.senthil kumar

Hai all,
In MIGO transaction, I want to know the BADI or EXIT NAME in which the following fields are avilable .
Fields name: exgrp, EXCISE_ACTION
exact screen field name is : J_1IEXHEAD-EXGRP
J_1IEXHEAD-EXCISE_ACTION
Full Points will be given for correct answer
Thanks in advance.
s.senthil kumar

In MIGO transaction Transfer posting user exist or BADI or Enhacements

Similar Messages

Maybe you are looking for