In migration assistant, using a time machine backup, what is the extra data that appears after I deselect all the checkmarks under the user?

When restoring a time machine backup using Migration Assistant, I'm given a choice of what to restore. If I click on a user, and I deselect everything(Desktop, Music, Movies, Documents, etc.) there is still 40 Gygabites of stuff. What is in the 40 Gygabites?!

Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

Similar Messages

In the installation process lion will not install as message reads MAC HD 904 gb available this disk is used for time machine backups .What is the next step

After downloading ,completing the lic agreement phase, the next step is where to install and automatically' MAC HD with 904 gb available this disk is used for time machine backups' is shown and installation is blocked .
Any body got any idea what to do next ?

Time machine needs its own partition to operate. So you are not going install a OSx Lion on that volume.
If there is enough room you may be able to partition the drive on the fly with DiskUtility
Are you saying you clean installed Lion and you are trying to move your user Data over with TM via the migration Assistant? Please explain.

Migration Assistant restore of Time Machine backup

I have problems using Migration Assistant to restore Time Machine backup after replacing my hard drive (the old hard drive crashed so I replaced one and installed snow leopard). During the migration, I created a new user account for the TM backup because of the same account name with my new system. The migration turned out to be incomplete. I found only the applications are transferred, all other things like preferences and settings, documents etc are not transferred; and I'm not allowed to open my backup files (no permission to view the contents). How can I have a complete migration? And can I restore all my previous personal settings?
Thanks!

Then can I transfer my previous settings especially those of Mails, Safari bookmarks, iTunes music... using Migration Assistant anyway?
You should be able to, but I'm not sure exactly what might have gone wrong in your case.
I'm afraid I may not be able to restore the entire system b/c the service center replaced my hard drive and installed the Snow Leopard, but I don't have the installation disk, I only have a Leopard I bought months earlier, the Time Machine backup is the leopard version.
If you don't have a Snow Leopard install disk, you shouldn't try to keep Snow Leopard installed. You shouldn't use a Leopard install disk for troubleshooting problems on a Snow Leopard system, so you have no troubleshooting tools. Just follow the directions at that link I gave you (at step c, you should reformat the hard drive), using your Leopard disk, to get Leopard and all your data restored from your backup.
If you want Snow Leopard, buy a copy (it's only $29) and install it over Leopard after you've got everything working.
The hard drive crashed this morning without any precaution. Do do you think I can still do the restore?
Well, what do you mean when you say "the hard drive crashed"? Seems odd that Apple would have replaced your hard drive and installed a clean system, only to have it fail again shortly after you get it back. Not that that couldn't happen, it's just odd. What exactly happened?

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. Help.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice. Thanks.

Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

I am getting error "The disk is used for Time Machine Backup" when installing the new OSX Mountain Lion upgrade"

I am keep getting this error "The disk is used for Time Machine Backup" when installing the new OSX Mountain Lion" when doing the upgrade to newly OS.

The folder would be at the root of your hard drive. Double-click Macintosh HD and look there.
If it isn’t there, I’m not sure what it is seeing.

Migration Assistant restore of Time Machine backup is incomplete

Some app, I don't know which one, keeps messing up the disk drive catalog structure, forcing me to wipe the drive and do a complete restore. I just had to do it again today (third time in a year), but this time Time Machine isn't restoring the user accounts, only the applications.
A random check of the user accounts shows they've been fully backed up on the Time Machine drive and they show up in Migration Assistant as accounts that can be transferred, but they're not transferring. I'm getting no errors from Migration Assistant, it just finishes with the applications and says my files have been transferred.
Any ideas?

I had the same problems when migrating from Time Machine (same computer but the hard drive crashed so I replaced one). During the migration, I created a new user account for the TM backup because of the same account name with my new system. I found only the applications are migrated, all other things like user accounts, preferences and settings, documents etc are not transferred; and I'm not allowed to manually open backup documents. How can I deal with it?

Migration Assistant from a Time Machine backup

I have a 2009 MacBook Pro. I recently had the hard drive replaced, and now I want to use Migration Assistant to restore settings and files from a Time Machine backup. The backup was done to a hard drive connected to an Airport Extreme. I am attempting to restore with the drive directly connected via USB. Migration Assistant does not recognize the backup as a source for the migration.
This is what the backup disk looks like:
If I mount the backup I see this:
I have the drive connected and the backup mounted, so neither is recognized for the migration.
MacBook Pro running OS X 10.10.1

Try using Setup Assistant.
Setup Assistant – How to re-run

How long for Migration Assistant to calculate Time Machine backup file size

I have just bought a new MacBook Pro to replace one that will not start up. Consequently I am trying to migrate my user account, files and applications from a Time Machine back up - but it seems to be taking an age to calculate the Applications and "other files" sizes.
How long should I be looking at for 145GB's worth of data to be recognised by Migration Assistant?
If there is a problem with the migration, can I replace the User and Applications folders on the new MBP with those from the Time Machine back up?

it's quite safe to assume that the Migration process is stuck. there is no sense in waiting any longer. stop the migration and see what got transferred. did the home folder get transferred? you can restore just the home folder using TM and reinstall applications but that has to be done correctly. DO NOT try to copy anything from TM backups using finder.
First, make sure that your current user has different short name than the user you are trying to migrate. then control-click on TM in the dock and choose "browse other TM disks". this will let you browse TM backups. select the folder /users/username there. click on the "gears" action button in the toolbar and select 'restore to...". select to restore to /users on your main drive. you'll have to enter your admin password to do it. once the copy is complete, go to system preferences->accounts and create a new account with the same short name and password as the user you are restoring. it will say that a home directory by that name already exists and ask if you want to use it. say yes.

Why is Migration Assistant not seeing Time Machine backup?

Had year old iMac with Snow Leopard and recently was lucky enough to have it replaced with a brand new model with Lion. Had the previous iMac backed up on external drive with Time Machine.
I know I can't restore from that Time Machine backup since I am now on Lion but shouldn't I be able to migrate my old user account from the Snow Leopard Time Machine backup to the new Lion system? The Lion Migration Assistant will not recogize or show the drive or backup from Time Machine though even though it is mounted in the Finder in Lion.
Any ideas?

I just had a similar problem to this. I have a MacBook Pro (Lion) that has been backed up to an attached USB Time Machine disk that was formatted on this same machine. I had a major crash, and had to reinstall Lion, and my Time Machine backup drive did not show up in the list. I do see several drives on my network, but not the locally attached USB drive. I rebooted and tried several time, no joy.
The backup drive passes all disk tests, and shows up when plugged in to other machines, and even shows up in the boot menu (but will not boot) when the MacBook Pro starts. And it has the secret flag file (if you do not know, the drive MUST have a zero length file titled ".com.apple.timemachine.supported" (note the leading .) at the root of the drive or the drive will not be recognized) and it should just work. It did backup to it just fine, but I cannot restore.
I finally made this work (I think) by actually getting another external USB drive, formatting it, and then using another machine to copy the Time Machine backup from the old drive to the new drive. I added the myster flag file to the new drive (see above) and connected it to the MacBook Pro. This time, it did recognize it.
I am trying to do a restore now, and looks like it should work just fine. What a pain in the butt.
I would love to hear from Apple what causes this. There must be an easier solution than to spend 6 hours copying a full back from one 2 TB drive to another! SIgh!
UPDATE: OK, it showed up as a restore disk in the "restore utility" in the energency partition, but I need to install a new OS (there was some curruption) and after installing a New OS, and getting to the migration screen, once again, this new drive does not show up. ARGHHHHhhhhhhh
Message was edited by: orubin after thinking it was working.

Migration assistant cannot see time machine backup

I have used internet backup to reinstall Lion on my early 2011 MBP, having installed a SSD drive.
I now want to recover all of my data, which is stored on a time machine backup on a USB external drive.
I ran migration assistant, but I just get the spinning logo and it does not see any data; the time machine backups drive is mounted and I can open the volume in finder.
What is the best way to get my data back? I want to selectively recover certain folders- I dont need to restore applications or the system (I purposely wanted to perform a clean install).
Thanks
Charles

I have used internet backup to reinstall Lion on my early 2011 MBP, having installed a SSD drive.
I now want to recover all of my data, which is stored on a time machine backup on a USB external drive.
I ran migration assistant, but I just get the spinning logo and it does not see any data; the time machine backups drive is mounted and I can open the volume in finder.
What is the best way to get my data back? I want to selectively recover certain folders- I dont need to restore applications or the system (I purposely wanted to perform a clean install).
Thanks
Charles

Force migration assistant to recognize time machine backup

I was trying to reformat Bootcamp partition and it reformated an attached external hard drive with my Time Machine backup on it and my internal hard drive that I boot from. I have professionally gotten the Time Machine backup recovered but it is not recognize by Migration Assistant or Time Machine so that it will restore my whole computer or at least transfer my account folder back to my reinstalled internal hard drive. I have 20 years of stuff locked in that Time machine backup and really need it back.

ahlquist wrote:
There are a lot of extra named files broken out in addition to the main folders (which look the same) that have 0-k in them and it looks like they were "links" or something like that.
Yup. Those are (or were) "hard links" (sort of like extra-fancy aliases) that are the key to how Time Machine can back up only changes, but still have every backup be, in effect, a full one. See How Time Machine works its Magic if you're interested in an overview of the details.
I'm very surprised you could see those via the Browse option.
You might try repairing the drive, per #A5 in Time Machine - Troubleshooting. I doubt it will help, but it's worth a shot.
I don't know if deleting the broken links will help or not.
is it safe to assume the links are messed up and I will have to recover the files manually?
It sure sounds like it.
If so, I'd put two Finder windows side-by-side; your current system and the most recent recovered backup, in List view, so you can see the contents more easily.
Start with /Users/<your home folder> unless you know you'd put stuff elsewhere.
Compare the two, and copy what's different/missing from the backups to your system. In some cases, you'll have to delete the (probably empty) folders on your system first. Note that you can't delete the "default" folders (Desktop, Documents, Downloads, etc.), so you'll have to copy the contents instead. This will be quite tedious, I'm afraid.
Then, if you can tell that things are missing, look in the previous backup for them. You might have to go back several backups for some, and may not find all the missing items anywhere.
I am most interested in documents, pictures, movies, mail and quicken files.
Assuming you hadn't moved them, docs will be in your Documents folder, iPhoto in your Pictures folder, Movies in your movies folder. Be especially careful with your iPhoto Library. Copy it all at once; it's like a database, and can't be copied in pieces.
For Mail and some other common things, see #28 in Time Machine - Frequently Asked Questions.
I don't use Quicken, and don't know where it puts things. For that or other apps whose data you can't find, either check with the maker, or start the app. See if it shows a default location; if not, create a bit of data, then go hunting for a file/folder with a name similar to the app and/or with a current creation or modified date. They'll probably be somewhere in your Documents folder, your /Library folder, or your /Library/Application Support folder.
When this is done, you'll have learned a whole lot about how OSX organizes things.
Keep us posted.

I have just taken delivery of a brand new 15" macbook pro, tried migration assistant from a time machine backup, music, photos, programs etc. They now take up 350gb of my hard drive but the files are nowhere to be found? can anyone help?

Set migration assistant to run whilst on a lunch break, given that it needed 2 hours or so, when i returned all programs and applications had moved across from my time machine backup of a now dead 15"macbook pro 2009 edition running snow leopard...When i look at my new system information it shows my new 500gb drive is full of music, movies and photos and has only 168gb free, not enough to run a new migration and i don't have any boot disks for Lion so really don't want to erase the hard drive. To compound the problem i'm in Vietnam where there isn't a genius bar just around the corner, or even an aasp within 700km - what should I do?

Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

Using old Time Machine backup after clean install of system

I had a system crash on my G4 iBook running Leopard. Based on advice given at the Apple store genius bar, I reinstalled Leopard from an install DVD, reformatting the drive. During the system installation process I used my Time Machine backup to reinstall the former users (but nothing else). I then installed my needed applications. So far so good.
Now I'm in the situation where I have an external drive with the Time Machine backup of the pre-crash iBook, and I'm not sure how to proceed. Do I start over and do a new backup (effectively erasing all my pre-restore data)? Or can the old backup still be used, and added to? While losing the pre-restore time machine data would not be a major loss, it would be kind of nice to have.
Any suggestions? Thanks!
Dan

DanK wrote:
I had a system crash on my G4 iBook running Leopard. Based on advice given at the Apple store genius bar, I reinstalled Leopard from an install DVD, reformatting the drive. During the system installation process I used my Time Machine backup to reinstall the former users (but nothing else). I then installed my needed applications. So far so good.
You didn't want any of your settings, preferences, data, etc.? The +MIgration Assistant+ app will let you do that, for one or more users. And of course, you can use the +Star Wars+ display to restore selected items.
Now I'm in the situation where I have an external drive with the Time Machine backup of the pre-crash iBook, and I'm not sure how to proceed. Do I start over and do a new backup (effectively erasing all my pre-restore data)? Or can the old backup still be used, and added to? While losing the pre-restore time machine data would not be a major loss, it would be kind of nice to have.
Your next backup will be a full one; everything on your internal HD is considered as changed, so will be backed-up again.
If there's room for that, it will just be a large incremental backup, added to the existing ones.
If not, Time Machine will begin deleting your oldest backups, one by one, trying to make enough room for the new backup (the amount on the internal HD plus 20% for workspace). But it won't delete the latest backup -- if that's the only one left, and there still isn't enough room, the backup will fail.
If there is room, the first backup may appear to be very slow; why is not clear, but as long as it's making progress, let it run. Subsequent ones should be normal.

Can't install - my disk is used for Time Machine backups

I only have one hard disk. And it has Time Machine turned on. Mountain Lion won't let me install on this disk, saying
"This disk is used for Time Machine backups"
I'm ASSUMING this means that I cannot install ML on a Time Machine disk.
Is this right?
So, do I turn off Time Machine to get ML to install?

I deleted Backups.backupdb.
Now, the ML installer says simply "OS X cannot be installed on <my drive>"
What the ???

In migration assistant, using a time machine backup, what is the extra data that appears after I deselect all the checkmarks under the user?

Similar Messages

Maybe you are looking for