In mini bridge is there a key stroke to "select all" images?

Hello,
In mini bridge is there a key stroke to “select all” images? I’d prefer a key stroke instead of having to use the View drop down menu to select all, and "Ctl A" doesn't do anything.
Thank you.

Select a message in the mailbox or highlight a mailbox, then keys command-a to select all.

Similar Messages

My G5 won't boot up. The Gray screen comes on and it thinks about it until the fan revs up like it is about to explode. A friend said to start it up with the OS disk and then go to utilities. Didin't work. Any suggestions? Isn't there a key stroke to help

Oh, so this is where I ask my question. Sorry, first time here. As I was saying in my long intro, the gray screen come up and the thing is spinning at the bottom, but nothing happens. Then the fan starts reving up like it is about to explode and I have to manually shut it off. A friend told me to start it up with the OS disk and then go to utilities. I couldn't find the thing, so I went out and bought another. Needless to say, it didn't work. Is there a key stroke to help jump start the machine? How can I get into this thing? I would prefer not to take it in because there are a lot of things on there I don't want just anyone to have access to.Thanks, in advance, for your help!

The last time you had to hold down cmd opt pr more than twice was a decade ago....
G5? PowerPC? 10.5? or earlier....
https://discussions.apple.com/community/desktop_computers/power_mac?view=discuss ions
Apple has a number of resources like "Power or Startup Quick Assist"
http://support.apple.com/kb/HT1149
Your drive does need to be repaired, and best things to buy are another backup recovery drive, with a small OS X partition; a copy of Disk Warrior is expensive @ $90 but excellent and best.
Never bother with or use the drive or reinstall while there are errors. Don't take a "clean' bill from Apple Disk Utility to mean there are no errors. Only that it didn't find what it looked for.
http://www.macintouch.com/readerreports/harddrives/topic4557.html#d12aug2010
http://www.alsoft.com/DiskWarrior/index.html
A quick search "keyboard shortcuts" takes you here:
http://support.apple.com/kb/HT1343
how to resolve and fix startup issues with fsck and disk utility:
http://support.apple.com/kb/TS1417
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
How to use DU to backup and restore
http://support.apple.com/kb/HT1553
http://www.alsoft.com/DiskWarrior/index.html
http://www.bombich.com/ccc_features.html
Make sure to have multiple backup sets and of your system so if there is a serious problem, you can just erase and restore to be back runninig.
Sounds like your G5 though needs PMU reset, not PRAM, and the best way for those is to clear nvram instead. might even want to check for dust; tell what System Profile says (later) as to "PowerMacX,Y" or "MacProX,1"
http://www.apple.com/support/powermac or /macpro
http://www.apple.com/support/sitemap/
The Utility menu is on the menu bar of an "OS X Install DVD" and at the point where you get to but stop at "install....' for OS X. you probably do need to install OS X on another drive to work from.
Oh, a real severe issue and damage to the drive directory or filesystem CAN in cases prevent booting from DVD (the system still tries to find and see what boot volumes are present) and can help to pull or disconnect the drive. Putting a drive in a FW case to turn on after startup is very useful.

In mini bridge is there anywhere that states the number of items currently in the filmstrip?

Hello,
In mini bridge is there anywhere that states the number of items currently in the filmstrip?
Thank you.

Hi,
There is no limit on no of items in a list box.
Check in the properties of the list box whether you gave the source data, destination properly.
And also under the bahaviour tab set "insert on" property on mouse click.
Hope this helps
uma

Is there a way I can 'select all' for downloading purchase files via family sharing instead of selecting each file or folder one at a time?

Is there a way I can 'select all' for downloading purchase files via family sharing instead of selecting each file or folder one at a time?

or home sharing

I sometimes have over 1000 junk emails clogging my phone. I would like to know if there is a way to 'select all' in order to delete them. Deleting emails often takes me ungodly time.

Please let me know if there is a way to select all emails and delete them. Selecting, scrolling, selecting and scrolling is tedious when you have 1000-2000 junk emails to wade through.

At the top of this page, click your name, where yours says "Welcome, linda166":
Click the link "Manage email notifications":
Click the checkbox at the upper right - to the right of where it says "Date" - this selects all of the messages on the page:
Click the button "Remove selected notifications":
Click "Next" and repeat for each page. You may have less than 213 pages.

My wireless mouse does not work-how do I link it by wired keyboard? Is there a key stroke to open system preferences?

My wireless mouse, keyboard and keypad for my iMac have all become unlinked for some reason. Just turned it on, no linkage. I do have a wired keyboard that I connected in order to sign on. Now I cannot choose system preferences and link my wireless devices without my mouse. What key strokes are used to choose the Apple, the system preferences in the dock, or some way to start the linking process?

First, make sure your batteries are fully charged; you can also use alkaline batteries if you want. When you insert the batteries, press the depressed button on the right side of your keyboard/wireless mouse; both should automatically "link" onto your computer via bluetooth connection.
Also, make sure the bluetooth devices are linked by going to System Preferences/Bluetooth, and make sure the "On" and "Discoverable" boxes are checked.
And please, post here if you've achieved success.

Key Command for Selecting All in Stack?

- Hi, I'm wondering if there is a key command that I missed that allows you to select all items in a stack when it is collapsed?
I'm mostly using Bridge for the Stacks feature. I actually prefer to use cataloging programs for DAM. But shooting HDR, stacks are a must!
But when I want to do things with the images in a stack, such as deleting them all, opening in Photoshop (individually or to merge), etc., it only selects the top image by default.
I must be missing something. It's a drag to have to open/close all the time.
And a separate but related issue:
- Does anyone know why all stacks are removed when you do a Batch Rename on a set of photos?
I let Photoshop churn for 30min. + on the 'combine HDR/Panorama into stacks' command. Got all my HDR sets grouped nicely as stacks. Then decided to batch rename them and presto - no more stacks! Had to do it all over again!!!

Hi Kenny,
To apply a command to all photos in a collapsed stack, you must select them all by clicking the stack border, not the top image. See
Stack files in Bridge Community Help.
I'm not sure about the batch rename issue that you describe. Maybe someone else can chime in on that.

HELP! Keyboard -lowercase 'stuck'-no caps, no Shift key-Can't 'select all'

HELP!
I have tried all sorts of things, like:
- removed syst prefs to desktop then restarted
- un-done, re-done, re-booted
- tried various options in International and Keyboard & Mouse
- run disk utility, both from startup CD AND in target disk mode
- ran Smasher
- swapped out different keyboards and/or mice
...but these are my keyboard problem symptoms that persist:
- numeric keypad not working
- the shift key (for caps & shift characters) not working&
- commands (i.e., "Select All") not working
...the keyboard does not work in ANY native Mac appl (e.g., Mail, Safari, TextEdit).
The only time my keyboard will work correctly is when I am using Firefox or Word, etc., or when I create a new account as a test new user and I log-in. Keyboard works fine. So it must just be me as user.
Also, oddly enough, keyboard prefs do not show up anywhere.
Anyplace where I should see something, such as
Library>preferences - there should be a file com.apple.keyboardtype.plist --- there is no file in any of the folders anywhere.
All of a sudden the keyboard stopped working, no warning. But my mouse attached to it still works fine. I have no clue what to do to fix and my AppleCare has ran out.
Other things I have noticed and tried:
- running tech tool
- repairing permissions
- switching usb ports for the keyboard from the back of the display
- removing the mouse from the back of the keyboard
- unplugging everything but the keyboard and mouse
...any ideas???

I did test with a spare keyboard, and it performed the same way: does not work for my user account, is fine for the test account I set up as an additional log-in.
I also did this to try and solve my issue, but still nothin':
- ran OnyX AND Cache Cleaner
- ran & configured PrefEdit
- ran AppleJack twice, once on AUTO for deep cleaning (in single-user mode, of course...)
- ran MacJanitor
- tried again to re-set my system prefs
- reset PRAM again
Sigh.
All I want is to be able to type capital letters in Mail & Safari. Seems like I'm asking for too much!
Sigh again.
Thanks for any other advice or things you think I should try.

When is there going to be a select all/delete all option in email? I need to search for certain emails and delet them from my phone but not my email program (Outlook)

when will there be a select all/delete all option in Emails? I have a large number of emails that come to my phone which i dont want to delete from my outlook mail account (On my PC). However, i want to be able to search, select all and delete these emails from my phone? I do not use ICloud either as it causes issues with my calendars at work.
These features should be a standard as there are plenty of other users out there that are trying to do the same thing and as yet there has been no progress? The email on the iphone is one of the biggest downfalls of the phone, blackberry and android handle them much better, but i dont have an option with my phone at work. Please help??

No one here would have any idea when or if such a feature would be introduced until and unless Apple announces it.

Is there any options/addons for selecting/changing image size when viewing images?

When clicking to open images when on web pages there is no option to select size.
I'm looking at some pages that have images (mostly jpg) I like to compare and that is very hard when all images open in a size that normally fill most of the browser window.
So I wonder if there is some hidden options or addons for selecting image size when opening images for viewing?
I have tried Image resizer/scaler, image zoom and show picture with mix results. Image resizer/scaler and image zoom allow resizing of images, but when opening images on same tab as web page the white image "frame" that is visible when reducing image size is left in original size. This make viewing and opening other pages a hazard.
I'm grateful for any help...cheers :-)
Picture of white frame
http://s25.postimg.org/z1ubo6zun/Remove_Exterior_Fog_at_Skyrim_Nexus_mods_and_c.png

hehe no offense, but I'm not following the version rushing from Mozilla. I'm using many customizations and addons and it is a nightmare to change to a new version and practically impossible to use last version. Also the FIrefox history have shown that earlier versions have both been more stable and had better implementation of features.
Spending hours customizing and finding out that addons dont work with new version every time Firefox come with a new version , no thanks. For that to happen Firefox have to be more compatible across versions and more friendly toward customization in updates and new versions. I have used Firefox for at least 8-9 years with practically no security problems and one thing I have learned is: dont update or install next version if the version I have is working well.
Maybe I should have mentioned this in this question, that Im using v26 and that my FIrefox is heavily modified with addons and customizations.
'''Back to the subject'''
Anyway I dont think any of my customizations or addons should create a white frame behind images, but I'm asking to find out if you guys also get this white frame when resizing pictures to a smaller size after clicking images for viewing.

I can't hear iTunes music or internet radio but internal and external speakers are definitely working. Is there a key stroke I have set or some other, maybe Yosemite, issue?

I have checked my internal speakers on an iMac and also the external speakers - all working. When play music in iTunes the sound bar moves but no sound is heard. Same problem if I want to listen to the radio via internet. Has anyone a suggestion. Is it a Yosemite issue - I have had others involving printers. thanks

like davis says then even though I have connected headset and external speakers to my imac then at boot up the boot sound comes out of the imac speaker
but once booted into OS X all audio is played out of the headset and ext speakers and the imac speakers are silent as the grave

Bridge Help | Mini Bridge

This question was posted in response to the following article: http://helpx.adobe.com/bridge/using/mini-bridge.html

hi there, i totally agree with anne marie, after LOVING mini bridge in cs5, i am very disappointed by cs6's version.
having a large library of psd files that are sorted into large list of categorical folders, it was hugely productive to be able to click in the main preview window of mini bridge (where you could see thumbnails of folders OR jpgs/psd, start typing the first few letters of the name of folder i wanted to access to be taken to it, hit enter to go into that folder, and view thumbnails of the psd files within, then drag a psd as a photoshop smart object into my project. essentially it appears that mini bridge in cs5 worked just like bridge's 'compact' version, although neatly within the photoshop workspace. perfect.
now, because i can't see folders in the main thumbnail area, i have to use the navigation pod above it (which i used to have minimized in cs5) which does not support typing to get to a folder (which means that i have to scroll down the looooong list of folders to get to the one i want), i tried using the 'search' function, but it only searches files, not folders, mini bridge is pretty much useless to me now, and takes even longer than using finder to get to an image i want to use. i know i can use bridge but i find it really annoying going between the two now when cs5 mini bridge was pretty much perfect for this.
not only that, but when i drag a psd into my document now, it is automatically turned into a rasterized layer instead of a photoshop smart object as it did in cs5. also devastating to my particular workflow. is there a setting im missing that i cant find??? ive googled it to death and although ive found others with this problem there doesnt seem to be a workaround. seems like being able to type to get to a folder a stupid omission to make, surely im missing something obvious???

Key stroke or other means to open CD Tray

I have a G4 with a G3 keyboard. I can't open the CD Tray with this keyboard. Are there any key strokes or other means to open the CD tray?

See my answer on your other post http://discussions.apple.com/thread.jspa?messageID=9590659#9590659
 Cheers, Tom

Key stroke questions

1). Is there a key stroke to fill the timeline with a selected clip or group of clips. In FCP its Shift-option-Z.
2). is there a way to 'snap' the razor tool to something for a precise cut?

1) Zoom in or out to the timeline pointer with the + or - keys, Hold the alt key and move the mouse scroll wheel, the \ key under Back Space to return to all clips on the sequence.
2. Move the timeline pointer and press the shift key.

How do I enable mini bridge in InDesign CC

Mini Bridge seems to be missing from my Creative Cloud versions of InDesign, Illustrator and Photoshop.
How do I enable Mini Bridge?
I am up to date on all versions of the apps and I am running on a Mac.
I am able to use the full version of Bridge for browsing.

Unlike Peter Spier, I have installed Bridge CC and it is operational. I followed the instructions in the link to "trash" preferences. (Really, he should have given the backup advice BEFORE telling you the steps to delete... for those who followed our cake recipe given last week, here is the antidote...)
Alas, deleting preferences didn't seem to help. I've deleted preferences for both Bridge and ID. Mini-bridge does not appear in the Window menu nor does it display when I shift-click the Br button on the menu. Bridge itself works fine -- so things are not at a standstill -- but this is annoying. Somewhere in my switch from CS6 to CC mini-bridge went away.
Anyone else with an idea what I should try?

In mini bridge is there a key stroke to "select all" images?

Similar Messages

Maybe you are looking for