In MM-SUS : Localization

Hi
In MM-SUS - there is one tab called Localization - What is this ? what is the benefit from this?
Thanks
Harish

Hi Muthu,
Sorry for the half information. We found note for SRM SUS localization (note no 906672) , this is applicable for indian scenerio's , nothing but it supports Excise Invoice
Thanks
Harish.

Similar Messages

Statutory Compliances (Indian Localization)

Hi All,
I've some doubts regarding the Statutory Compliances (Indian Localization) in SBO and I want to share with all you. Anyone who can plz help me.
Service Tax
·         Is tracking invoice wise details and automatically calculating service tax payable and input credit with the provision of later adjustments possible ?
·         Does SAP B1 has predefined service tax categories with rates ?
·         is adjustment of input credit towards service tax payable possible ?
·         Is generation of reports in govt. prescribed formats possible (TR6 Challan, Input Credit Form, ST3 Report and ST3-A report) possible ?
TDS
·         Does it have configurable TDS ledgers with options to specify the nature of payment and assessee type along with the rate of TDS ?
·         Is accounting for tax on partial/full payment of bills there ?
·         can we track each transaction from deduction to payment ?
·         does it have reports like Form 16A, TDS Challan, TDS computation and TDS payable ?
·         does it generate e-TDS in NSDL compliant format ?
Excise for Traders
·         Excise Invoice ?
·         Tracking of excise duty from time of purchase to sales and ability to pass on excise duty
·         generation of quarterly returns in Form-2
·         Maintaining of Excise stock register RG 23D
How is Excise for Manufacturer FBT, TCS & CST supported.
Thanx in adv.
Sibasish

Hi
Check the following links:
[https://websmp101.sap-ag.de/~sapidb/011000358700006412562006E.pdf]
[https://websmp101.sap-ag.de/~sapidb/011000358700006412602006E.wrf]
[https://websmp101.sap-ag.de/~sapidb/011000358700005260902006E.pdf]
[https://websmp101.sap-ag.de/~sapidb/011000358700005245982006E.wrf]
All the above links require an SUser ID.

Invoice creation by vendor and Brazil Localization

Hi gurues,
We are starting a SUS implementation on SRM 7.0 for a brazilian company and we want to know if SRM 7.0 is localized for Brazil, in order to calculate brazilian taxes at invoice creation by vendor on SAP portal.
If yes, I would like to know if there is a guide or document to implement brazil localization on SRM 7.0. Thanks in advance.
Regards,
Horacio Miranda

Hi,
Please check help.sap.com. There is some info.
http://help.sap.com/saphelp_srm70/helpdata/en/46/316c6190fd14dde10000000a155369/frameset.htm
Regards,
Masa

Tax pricing conditions to MM-SUS

Hello Expert,
we are implementing MM-SUS classic scenario. Now we want that PO should have all the tax pricing conditions in SUS, insteasd having total tax amount.
Could you please help me how can we achieve this?
Thanks and Regards,
Aakash.

Check OSS notes 1299372 - Localization of SRM-SUS 7.0

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Error while transporting the Vendor in MM-SUS

HI
We are implementing SRM server 5.5 and follow a MM-sus scenario.
We were able to transport the vendor to SUS via BD14.
but now we are reciveing an error -
An error occured within an XI interface: Exception occurredE:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault>
Can some throw light on this error.
Previously when we transffered the vendor to SUS an user
was getting created in su01 which is not getting created.
2 When a vendor is transffered it creates a contact person "DO Not USE" why it that so ???
regards,
Nimish Sheth

Hi,
Did you see the note 807812?
BR,
Disha.
Pls reward points for helpful answers.

Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.

Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni

Install of SuSE Linux 9.0 freezes early on

I recently upgraded to an MSI 865PE Neo2 motherboard, with a P4 2.8 GHz processor. I've installed Windows XP Professional without difficulty, but I tried to install SuSE Linux 9.0 and it locks up early on in the boot process during "hardware detection." Opinions on this forum about earlier versions of SuSE and the YaST program were fairly poor, and their own site says that support for the Neo2 is only "partial." Has anyone gotten Linux to install successfully on this mobo, and if so, which flavor?

I have a Neo2-S and have mixed success w/ Linux as well. I just tried SuSe Live 9.2 and it took me about 10 times to get it to boot. I think the only thing that I changed when it actually booted was the option to make the boot screen verbose. I hit something like F3 and changed that option.
Knoppix 3.3 works great for me
Knoppix 3.4 doesn't boot
Mandrake Move 10 doesn't boot
I may have some of the version numbers wrong because I am just typing them off of the top of my head. I also have only tried the bootable CD version because I don't want to risk any conflicts w/ my Win XP.
I am also about to get a new 200 GB SATA drive and I know that is going to complicate things even further. I just wish that the devs would spend more time working on hardware support so n00bs won't have probs when trying out Linux.
They really need to make all distro's of Linux be able to use all of the IDE/SATA channels in a system. This is probably dependent on the kernel though. I don't know that much about Linux.

Compiling Apache 1.3.9 & PHP 3.0.12 to use Oracle 8.1.5 on SuSe 6.2

Hi!
I am trying to compile the above packets but am running into massive problems.
PHP3 compiles well, if i try to use the "normal" static module for Apache, but the Apache configure script says that it needs an ANSI C compiler and stops.
I am using GCC 2.7.2.3 with the bugfixes from SuSe.
Since that did not work I tried the configuration as a Dynamic Module. The Apache "Readme.config" explains two ways to do so, but the first has the same problem with GCC and the second (via APXS) compiles Apache without problems, but PHP3 wont compile since it does not find a library. The exact error is: "/usr/i486-linux/bin/ld: cannot open -lclntsh: No such file or directory"
I found a libclntsh.so.8.0 in the oracle/lib directory, but since i fumbled around with this library (i tried ln -s libclntsh.so.8.0 libclntsh.so) sqlplus says libclntsh.so.8.0: cannot find file data: no such file or directory (even now that the link is deleted again).
And PHP still wont compile. Any ideas would be welcome.
P.S.: Is it normal that Oracle has to be told NOT to create a database during install, TO create a database???
We worked for 3 days on the Oracle installation and that was the only way to install Oracle without errors.
thx
Uwe Schurig

Lee Bennett (guest) wrote:
:Hi
:I have successfully installed Oracle 8.1.5 Enterprise edition
on
:Suse 6.2 and applied the 8.1.5.0.1 patch set,
NO!
SuSe 6.2 have a patch file for Oracle made from their developers.
Never use Oracle 8.1.5.0.1 patch file that doesn't work because
us bugged.
Use SuSe 6.2 Oracle patch set.
(don't remember the web page where you can download it but a
search with word "oracle" from SuSe homepage will lead you to
it)
-Stefano
null

SQL Loader (Oracle 8.1.5 on Suse 6.3) Internal Error

Hi all,
I try to insert data with SQL Loader on Linux (Suse 6.3) and get the following message:
SQL*Loader-704: Internal error: ulmtsyn: OCIStmtExecute (tabhp) [-1073747572]
ORA-00942: table or view does not exist
The control file and data file did work on another platform.
Please help me!
Thanks,
Thies Mauker

Lee Bennett (guest) wrote:
:Hi
:I have successfully installed Oracle 8.1.5 Enterprise edition
on
:Suse 6.2 and applied the 8.1.5.0.1 patch set,
NO!
SuSe 6.2 have a patch file for Oracle made from their developers.
Never use Oracle 8.1.5.0.1 patch file that doesn't work because
us bugged.
Use SuSe 6.2 Oracle patch set.
(don't remember the web page where you can download it but a
search with word "oracle" from SuSe homepage will lead you to
it)
-Stefano
null

Palm Missing Localization Information Display after Mac OS 10.4.6 Update

Recently I installed the Mac OS 10.4.6 update after confirming that it should improve some minor issues with "Hot Synching".
Previously I could "Hot Synch" with my Palm Mac Desk Top software 4.2.1 and also with my PC with no issues. My Palm is using Palm OS 4.5, I believe.
Now I can still can "Hot Sync" on my Mac--with no issues. However, when I take the Palm out of the USB Cradle and try to access the Palm Display page with the featured icons, I get a very unusual error:
"Application can not be launched because it is missing localization info file xxx--enUS.prc."
I checked the Palm site and entered the error message and the response was returned that indicated "several applications with the Palm Tungsten T require overlay files to run properly. "Dialer, SMS, & WAP Browser" require and overlay "prc" file that determines which language the application displays on the device. If this "prc" file is missing, it will cause this message to be displayed."
I was instructed to install the "xxx_enUS.prc" using the Palm Install tool.
I installed all of the "xxx_enUS.prc" files on Disk 2 and have performed a "Hot Sync" again. A successful "Hot Synch" was performed.
The above message is still displayed on the Palm screen even after that successful "Hot Synch".
I can not use any of the screen icons to select any of the features or vprograms on the Palm.
The face buttons can be depressed but the selection from the Palm hand held icons with the stylus can not be accessed as the "missing localization info, ect" is displayed.
I have performed soft resets to no avail.
I still can not get this issues resolved.
Recently I instlled iSynch and the problems still occur.
Anyone out there have any suggestions.
POWER MAC G-4 (933 MHz QuickSilver) Mac OS X (10.4.6) iSite
POWER MAC G-4 (933 MHz QuickSilver) Mac OS X (10.4.6) iSite

When I do Command-I, I see that I have read/write access for the local drive - depending on the machine I am sitting at - and the other networkeded drives allow read only.
I guess the question is - how does the system know a user with the same username and password are actually the same person?
Robert

MM-SUS and EBP-SUS in the same client

Hi experts
I have a doubt about implementationMM-SUS and EBP-SUS in the same client, If I send a PO from MM to SUS and after send a PO from EBP to SUS to the same vendor, the vendor will be able to see 2 POs with just one logon?
As I know when I replicate a vendor from MM to SUS a Business partner is created and when I replicate a the same vendor from EBP to SUS a new Business partner is created and are diferent BP so a user and pass diferent .
Thanks
Nilson

Hi Nilson,
If i understand your scenario, you'll replicate an existing R/3 vendor to EBP. The vendor will be a direct vendor in R/3 while the same would be used as for Indirects in EBP.
Well, when you replicate the R/3 vendor to EBP, the vendor has the R/3 link in the form of Backend Logical systen name in EBP.
So when you replicate the vendor from R/3 or EBP, there will be ideally only one entry for the vendor with references to R/3 and EBP systems.
Hope this clarifies your question.
Cheers,
Akash

Administração de boletos em Localização Brasil

Prezados,
O SAP Business One precisa se adaptar à localização brasil a que se refere a adminsitração de boleto.
Dois pontos que notei:
1 - Mudar data de vencimento quando o boleto estiver no status enviado gerado ou depositado. (esse primeiro já postei no SAP Business One Product Development Collaboration), pois aqui no Brasil é muito comum mudar data de vencimento por demora na entrega da mercadoria por exemplo. da forma como está no B1 tem que cancelar o boleto, alterar a data e depois gerá-lo novamente fazendo com que perca a referência do boleto.
2 - Dar desconto ou juros no boleto com o boleto no status depositado viabilza, pois não precisaria fazer lançameto manual contábil para contas de maior ou a menor, pois é muito comum no brasil descontos até a data de vencimento, mas não da forma como o SAP B1 faz (na condição de pagamento no Brasil não funciona).
Se a SAP fizer issoficará mais fácil , agil e interessante na criação de relatórios como o de comissão por exemplo.
Se eu cancelar o boleto e criá-lo novamente como o desconto eu perco a referência e atraso o meu processo.
Estas duas sugestões só seriam permitidas usar com autorização de usuário.
Att,
Lucidio Gandra Alves

Dear,
SAP Business One must adapt to the location Brazil referred to the Administration of billet.
Two points I noticed:
1 - Change the due date, when the billet is in the status sent generated or deposited. (I posted this first in SAP Business One Product Development Collaboration), because here in Brazil is very common to change the due date for delay in delivery of goods for example. how is the B1 has to cancel the ticket, change the date and then regenerate it causing him to lose the reference of the billet.
2 - Give a discount or interest in the slip with the slip in status filed viabilza therefore do not need lançameto manual accounting for accounts more or less as it is very common in Brazil discounts to maturity, but not the way the SAP B1 is (provided that payment in Brazil does not work).
If SAP makes it easy issoficará, agile and interesting in reporting as the commission for example.
If I cancel the slip and create it again as the discount I lose my reference and delay the process.
These two suggestions would be permitted to use only authorized user.
Lucidio Gandra Alves

Localização Brasil - Preparação do ambiente

Prezados,
Gostaria de tirar uma dúvida sobre a preparação do ambiente para implementação da Localização Brasil.
[Situação]
Estou atuando em um projeto de rollout internacional e a equipe de TI deseja realizar o processo de preparação do ambiente para Localização Brasil.
Passamos as instruções iniciais a seguir para prepação do ambiente, conforme links abaixo:
Criação do client com cópia do client 000;
Execução da transação O035 para alterar o template para Brasil;
Execução das CATT de MM e SD;
Comparar client 000 com novo client, para incluir objetos na request;
Transporte para o ambiente DEV;
Início da realização.
É desta forma que trabalhei até o presente momento em projetos anteriores.
No entanto, a equipe de TI ficou com algumas dúvidas sobre o processo e entrou em contato com a SAP Alemanha para obter maiores detalhes. Em reunião com a equipe SAP Alemanha, fomos informados que não se executa mais a transação O035 por esta transação alterar informações em diversas tabelas. Ao invés disto há outro processo, onde são selecionados objetos no client 000 e incluidos em uma request (como pricing de MM e SD, tipos de Nota Fiscal, tipo de item de Nota Fiscal, etc.) e transportados para o DEV. Neste contato, não haviam pessoas da SAP Brazil envolvidas.
Informaram também que não é necessário copiar a empresa/centro 0001 para criar a estrutura organizacional para o Brasil, pode ser realizada a cópia de qualquer centro utilizado em outro país como referência.
Não encontrei nenhuma documentação sobre este processo, e as documentações mais recentes que localizei recomendam a utilização o Country Installation Program (transação O035).
[Dúvida]
A SAP hoje sugere outra forma de preparação do ambiente para Localização Brasil, que não a descrita nos documentos abaixo? Em caso positivo, qual seria o caminho?
Pesquisando em outros forums, verifiquei a informação que há um site da própria SAP onde é possível informar características do sistema (versão, suporte package, enhancement package, etc) e o site informa quais as notas requeridas para a implementação da Localização Brasil.
[Informações adicionais]
Nesta dúvida, não me refiro a notas específicas de processos, como CBT (1706309), MP135, CT-e, NF-e 3.10 etc. A dúvida em sí é sobre a preparação para início das configurações dos processos de negócio.
[Links de referência]
Seguem abaixo os links de referência:
Brazil - SAP Library (ECC 6.0 EHP 7)
Quick guide for Brazilian Localization Installation
Atenciosamente,
Rafael

Olá Rafael,
Também entramos em contato com a responsável na Alemanha sobre o installation guide para Brasil, mas não obtivemos resposta ainda.
Na verdade você ainda poderia utilizar a O035 porém o esforço nas configurações seria um pouco maior.
Assim que eu tiver maiores informações como link para documentação ou qualquer outra informação, posto aqui no SCN.
Peço também que visite nosso blog de NF-e para outras atualizações.
http://scn.sap.com/community/portuguese/sped-and-nf-e/blog
ERP KBA: 2125859 - KBA [3.10] NF-e 3.10 Go-live checklist for SAP ERP
ERP GRC NF-e: 2123768 KBA [3.10] NF-e 3.10 go-live checklist for SAP NF-e GRC
Att,
Adriel

Localização Portuguesa e Defir

Bom dia,
Relativamente às declarações peródicas do IVA no SAP 2007A, depois de preenchidos os campos da configuração do IVA na localização portuguesa (Sujeito_XX, Base_XX, Estado_XX), devemos ir a Relatórios -> Financeira -> Contabilidade -> Imposto -> Relatório de IVA e exportar para o Defir.
O problema é que ao exportar para o Defir, ao ir a "Declarações periódicas do IVA", as declarações não apresentam qualquer tipo de valor. Há algum passo necessário além dos que referi?
Alguém me pode ajudar com esta questão?
Obrigado e cumprimentos,
Pedro Santos

Boa tarde Susana,
Antes de mais, muito obrigado pela resposta. O problema penso que é mesmo não estarem os campos de IVA todos preenchidos com o "Sujeito_XXX", "Base_XXX", etc. Não sei se bastará isso para a declaração ser preenchida.
Já agora, relativamente ao modelo22, sabe-me dizer quais os passos necessários para preencher automaticamente a declaração? Já encerrei o ano contabilistico e exportei o balancete para o Defir, mas também não tenho valores no modelo22.
Desde já agradeço a atenção.
Cumprimentos,
Pedro Santos
Edited by: Paulo Calado on Jun 15, 2009 7:53 PM
Edited by: Paulo Calado on Nov 27, 2009 5:25 PM

In MM-SUS : Localization

Similar Messages

Maybe you are looking for