In MM02 I want to update in Costing2 tab using BAPI

Hello,
I am asked to update certain values in MM02 t.code, Costing2 tab. I am asked to do this via BAPI.
Recording techniques like CATT and BDC doesnt work since the recording cannot capture mouse scrolls which is needed to reach Costing2 tab.
Can some one advice me on this. I have not worked on BAPI's.
Thanks in advance,
CMV

Hi,
BAPI_MATINSPCTRL_SAVEREPLICA
<b>Reward points</b>
Regards

Similar Messages

I want to update the Custom table using the data available in ITAB.

Hi,
I want to updaste the Custom Table which is created by me (Ztable) using the data available in itab.(which i got from defferent standard tables)
I want to update the custom table using the itab data How is it possible?
Is any possible by using Modify ?
DPK.

example here
modifying datbase table useing internal table
advises before updating this datbase table plz lock that table to avoid incosistency
write the logic for modifying
Modify the database table as per new dunning procedure
MODIFY fkkvkp FROM TABLE lt_fkkvkp .
and finally unlock the table
example
*To lock table for further operations
constants: lc_tabname TYPE rstable-tabname VALUE 'FKKVKP' . "FKKVKP
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
tabname = lc_tabname
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc EQ 0.
To fetch all the contract accounts for customers of the segment
Households/SME.
PERFORM fetch_contract_accounts using lc_tabname .
ENDIF. " IF sy-subrc EQ 0.
*wrote the logic
Modify the database table as per new dunning procedure from internal table
MODIFY fkkvkp FROM TABLE lt_fkkvkp .
*unlock the tbale
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
TABNAME = uc_tabname .

Planner group is not updated in service notification using BAPI

Hi,
Planner group is not updated in service notification using BAPI BAPI_ALM_ORDER_MAINTAIN.
I have written the below code, but planner group is not updated in the service notification.
Please advice which parameters do i need to pass to update planner group in the service notification.
          wa_methods-refnumber      = '000001'.
          wa_methods-objecttype     = 'PARTNER'.
          wa_methods-method         = 'CREATE'.
          wa_methods-objectkey      = wa_subscr1-aufnr.
          APPEND wa_methods TO i_methods.
          wa_methods-refnumber      = '000002'.
          wa_methods-objecttype     = 'HEADER'.
          wa_methods-method         = 'CREATE'.
          wa_methods-objectkey      = wa_subscr1-aufnr.
          APPEND wa_methods TO i_methods.
          wa_methods-refnumber      = '000000'.
          wa_methods-objecttype     = ' '.
          wa_methods-method         = 'SAVE'.
          APPEND wa_methods TO i_methods.
          REFRESH i_partner.
          CLEAR wa_partner.
          wa_partner-orderid        = wa_subscr1-aufnr.
          wa_partner-partn_role     = 'VW'.
          wa_partner-partn_role_old = ''.
          wa_partner-partner        = wa_subscr1-parnr.
          wa_partner-partner_old    = ''.
          APPEND wa_partner TO i_partner.
          REFRESH i_planrgrp.
          CLEAR wa_planrgrp.
          wa_planrgrp-orderid        = wa_subscr1-aufnr.
          wa_planrgrp-plangroup      = wa_subscr1-ingpr.
          APPEND wa_planrgrp TO i_planrgrp.
          REFRESH i_planrgrp_up.
          CLEAR wa_planrgrp_up.
          wa_planrgrp_up-orderid     = wa_subscr1-aufnr.
          wa_planrgrp_up-plangroup   = 'X'.
          APPEND wa_planrgrp_up TO i_planrgrp_up.
*----Change order details with Technician name
          CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
            TABLES
              it_methods   = i_methods
              it_header    = i_planrgrp
            it_header_up = i_planrgrp_up
              it_partner   = i_partner
              return       = i_return.
Thanks & regards,
Krishna

Try this way
CALL FUNCTION 'BAPI_SERVNOT_CREATE'
EXPORTING
* EXTERNAL_NUMBER =
notif_type = 'S3'
notifheader = ls_notif_h
* TASK_DETERMINATION = ' '
* SENDER =
* ORDERID =
IMPORTING
NOTIFHEADER_EXPORT = ls_notif_e
TABLES
* NOTITEM =
* NOTIFCAUS =
* NOTIFACTV =
* NOTIFTASK =
* NOTIFPARTNR =
* LONGTEXTS =
* KEY_RELATIONSHIPS =
return = lt_return
* IF lt_return IS INITIAL.                                               " <<< Comment this lie
read table lt_return into ls_return with key type = 'E'. " << Change
if sy-subrc ne 0.                                                             " << Change
COMMIT WORK AND WAIT.
write: / ls_notif_e-NOTIF_NO.
ELSE.
LOOP AT lt_return INTO ls_return.
WRITE:/ 'errors'.
* ls_return.
ENDLOOP.
endif.
a®

Updating T'code ME23N using BAPI's

Dear All,
I am updating T'code ME23N using BAPI " BAPI_PO_CHANGE". First i m tried in SE37 there its not updating it giving error like " PO could not be changed using the Enjoy-BAPI" for this i m trying in 4.6c.
Here i have to update only two check boxes those are NO_MORE_GR(ELIKZ) and FINAL_INV(EREKZ).
Please tell me any one there are any other BAPI's are avialable or how to slove this porblem.
Best Regards,
Srinivas.

Hello
I just have run this code in 4.6C. It working fine.
DATA: xreturn like BAPIRET2      occurs 0 with header line,
      xpoitem like BAPIMEPOITEM occurs 0 with header line,
      xpoitemx like BAPIMEPOITEMX occurs 0 with header line.
xpoitem-po_item = p_ebelp. " set position here
xpoitem-no_more_gr = 'X'.
xpoitem-final_inv = 'X'.
append xpoitem.
xpoitemx-po_item = p_ebelp. " set position here
xpoitemx-no_more_gr = 'X'.
xpoitemx-final_inv = 'X'.
append xpoitemx.
CALL FUNCTION 'BAPI_PO_CHANGE'
     EXPORTING
              purchaseorder    = p_ebeln "set ebeln here
     TABLES
              return           = xreturn
              poitem           = xpoitem
              poitemx          = xpoitemx.
if sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING WAIT = 'X'.
endif.

I want to update new tasks by using exit QQMA0014 the notification qm01

Hi ,
i want update some mandatory task from custom table while creating or changing the QM notifiction through tcode QM01 or QM02 by using user exit QQMA0014. am trying to update but its giving one popup message "update was terminated received from author '
Could you pls provide me solution to update the tasks by using exit. Thanks in advance.

Please specify your requirement clearly. Are you updating a custom table of any fields in the standard table ?

Issue in material master update from presentation server using BAPI....

Hi Guru's...
i am trying to change the material master from presentation server (desktop flat file)
using BAPI(BAPI_MATERIAL_SAVEDATA) ....
while executing my program i am getting the message like material had changed...
but while in mm02 i am un able to fine the updates...
please find below program logic and correct me if any mistakes....
thanks in advance...
*& Report ZAREPAS36
REPORT zarepas36.
DATA : gs_bapimathead             TYPE bapimathead,
       gs_clientdata              TYPE bapi_mara,
       gs_clientdatax             TYPE bapi_marax.
TYPES : BEGIN OF gty_itab1,
        matnr(18),
        matkl(9),
        spart(2),
        ntgew(13),
        gewei(3),
        meins(3),
        END OF gty_itab1.
DATA : gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
       gwa_itab1 TYPE gty_itab1.
TYPES: BEGIN OF gty_itab2,
       abc(132),
       END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
      gwa_itab2 TYPE gty_itab2.
flat file at selection screen
PARAMETERS: p_files TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = p_files
    filetype = 'ASC'
CHANGING
    data_tab = gt_itab2
EXCEPTIONS
    OTHERS   = 8.
LOOP AT gt_itab2 INTO gwa_itab2.
IF gwa_itab2-abc(1) = 'S'.
    gwa_itab1 = gwa_itab2-abc(132).
    APPEND gwa_itab1 TO gt_itab1.
ENDIF.
ENDLOOP.
loop at gt_itab1 into gwa_itab1.
*Material
gs_bapimathead-material    = gwa_itab1-matnr.
*Material details at client data
*material group.
gs_clientdata-matl_group = gwa_itab1-matkl.
gs_clientdatax-matl_group = 'X'.
*Division
gs_clientdata-division = gwa_itab1-spart.
gs_clientdatax-division = 'X'.
*Net Weight
gs_clientdata-net_weight = gwa_itab1-ntgew.
gs_clientdatax-net_weight = 'X'.
*Unit of Weight
gs_clientdata-unit_of_wt = gwa_itab1-gewei.
gs_clientdatax-unit_of_wt = 'X'.
*Base Unit of Measure
gs_clientdata-base_uom = gwa_itab1-meins.
gs_clientdatax-base_uom = 'X'.
endloop.
*calling BAPI for making changes in material and saving thru BAPI.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
    headdata    = gs_bapimathead
    clientdata = gs_clientdata
    clientdatax = gs_clientdatax.
IF sy-subrc NE 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error occured while changing material'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'material',gs_bapimathead-material,'changed'.
ENDIF.

hi hello Guru's
i resolved the issuee..
pleaso go thru the below proram logic for your reference..........
*& Report ZAREPAS36
REPORT zarepas36.
DATA : gs_bapimathead             TYPE bapimathead,
       gs_clientdata              TYPE bapi_mara,
       gs_clientdatax             TYPE bapi_marax.
TYPES : BEGIN OF gty_itab1,
        matnr(18),
        matkl(9),
        spart(2),
        ntgew(13),
        gewei(3),
        meins(3),
        END OF gty_itab1.
DATA : gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
       gwa_itab1 TYPE gty_itab1.
TYPES: BEGIN OF gty_itab2,
       abc(132),
       END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
      gwa_itab2 TYPE gty_itab2.
DATA:ls_return         TYPE bapiret2,
     lt_bapiret2       TYPE standard table of bapiret2.
flat file at selection screen
PARAMETERS: p_files TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = p_files
    filetype = 'ASC'
CHANGING
    data_tab = gt_itab2
EXCEPTIONS
    OTHERS   = 8.
LOOP AT gt_itab2 INTO gwa_itab2.
IF gwa_itab2-abc(1) = 'S'.
    gwa_itab1 = gwa_itab2-abc(132).
    APPEND gwa_itab1 TO gt_itab1.
ENDIF.
ENDLOOP.
LOOP AT gt_itab1 INTO gwa_itab1.
*Material
gs_bapimathead-material    = gwa_itab1-matnr.
*Material details at client data
*material group.
gs_clientdata-matl_group = gwa_itab1-matkl.
gs_clientdatax-matl_group = 'X'.
*Division
gs_clientdata-division = gwa_itab1-spart.
gs_clientdatax-division = 'X'.
*Net Weight
gs_clientdata-net_weight = gwa_itab1-ntgew.
gs_clientdatax-net_weight = 'X'.
*Unit of Weight
gs_clientdata-unit_of_wt = gwa_itab1-gewei.
gs_clientdatax-unit_of_wt = 'X'.
*Base Unit of Measure
gs_clientdata-base_uom = gwa_itab1-meins.
gs_clientdatax-base_uom = 'X'.
ENDLOOP.
*calling BAPI for making changes in material and saving thru BAPI.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
    headdata    = gs_bapimathead
    clientdata = gs_clientdata
    clientdatax = gs_clientdatax
IMPORTING
    return      = ls_return.
LOOP AT lt_bapiret2 INTO ls_return.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error occured while changing material'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'material',gs_bapimathead-material,'changed'.
ENDIF.

IS-RETAIL: How to update custom enhancement field using BAPI?

Hi gurus,
Like ECC BAPI: BAPI_MATERIAL_SAVEDATA,
This BAPI(BAPI_MATERIAL_MAINTAINDATA_RT) is specific for IS-RETAIL to create and update material master data.
But now If I append one custom field "ZFIELD" to end of table MARA, my question is how to update this custom enhancement field(ZFIELD) using BAPI(BAPI_MATERIAL_MAINTAINDATA_RT)
Thanks in advance!

Hi DongHai,
I suggest you create your own BAPI. Just copy the codes in BAPI_MATERIAL_MAINTAINDATA_RT and add your custom fields. If you want to append the data of the custom field in table MARA, first, you have to create a structure table then goto SE11, type MARA and display. Click the APPEND STRUCTURE then choose the structure that you've created. Hope this will help.
Rewards if useful
Regards,
Mark

How to update j_1ipart1 j_1ipart2 by using bapi BAPI_GOODSMVT_CREATE

i want to update records in j_1ipart1 , j_1ipart2 , rg1 as it gets updated when posting in MIGO with refer to excise incoice.
i want to do the same by using the bapi BAPI_GOODSMVT_CREATE. Any one who can help me out , for what are the steps involved .
thanks in advance

Hi,
Refer the following SAP notes.
1. Note 485557 - BAPI_REQUISITION_CREATE: 'EXTENSIONIN' customer enhancements
2. Note 584902 - BAPI_REQUISITION_CHANGE: ExtensionIn not connected
3. Note 792132 - EBAN, EBKN: user-defined fields are not filled
Regards,
Harish

Updation in synchronous mode using bapi

hi all ,
i have a requirement to update master table using bapi /SAPMP/BAPI_MATERIAL_SAVEDATA where has it is taking more time can any one of you sugguest what will be the best approach which i can improve the execution time and can u tell me whether i can execute bapi in synchronous mode.
with regards,
abaper

Hi,
You can go for either BDC or LSMW also.
Regards,
Renjith Michael.

Update the Oracle Table using BAPI

Hi All,
    I would like to update Oracle Data Base with my custom BAPI using the Business Logic Transaction.
Could any one please give me some logic how to do it?.
Thanks
R M

RM,
Please follow the steps below:
1) Create and Configure the Data Server for the database you want to access/update (basically
    you are creating a database connection here).
2) Save and test the connection by clicking the 'Status' button
3) Create new query template with template type as 'SQL Query' and select the server you have
    configured in step#1
4) Select the mode as 'Command' and type-in your Insert/Update statements in the 'Fixed Query'
    tab. For example: insert into yourtable values ('[Param.1]','[Param.2]')
5) Test the query by passing parameters from the 'Parameters' tab. You are supposed to get a
    'Command Execution Successful' message if the data is successfully posted to the database.
6) Create a 'SQL Query' action block in your Business logic transaction to access the above query
    and map your Param.1, Param.2 etc. to your BAPI result (on the Link Editor).
Hope this helps.
John

Batch not updating while creating delivery using bapi

Hi
I have used following bapi to create delivery BAPI_DELIVERYPROCESSING_EXEC and passed the following parameters into bapi
lt_request-document_type = 'A'.
        lt_request-document_numb = deltab-vbeln.
        lt_request-document_item = deltab-posnr.
        lt_request-batch        = deltab-charg.
        lt_request-material = deltab-matnr.
        lt_request-plant = '3200'.
        lt_request-quantity_base__uom = deltab-kwmeng.
        lt_request-delivery_date = sy-datum.
CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
EXPORTING
DELIVERY_EXTEND =
TECHN_CONTROL =
      TABLES
      request = lt_request
      createditems = lt_createditems
      return = lt_return.
here i am able to create delivery successfully but the batch which i passed in bapi is not getting updated in vl02n to do PGI.
again i need to go to vl02n and give batch and quanitty manually to do PGI.is there anyway that batch gets updated in vl02n also.
Regards,
Venkat.

Hi
My answer is pure assumption.
Please check the following OSS notes
Note 758810 - BAPI_PO_CHANGE vendor batch and batch not visible
Note 1230268 - Field Vendor Batch never filled for PO BAPIs
Please take help from BASIS and SAP, before implementing the OSS note
Regards
Madhan D

Material Master: Update the Z fields using BAPI

Hi to all,
My requirement is simple. But I do not have much knowledge on BAPI. I have got some information that we can extend th BAPI and update the Z fields in material master. I have added the z fields in MARA. So when I call the bapi z fields has to get update.
Which BAPI can i use? I have got one BAPI - BAPI_MATERIAL_SAVEDATA. plz suggest me to do it.
1. how do i enhance the BAPI or extend th BAPI.
2. Is ther any approch to do it.
thnks
Yerukala Setty

Hi,
Append the z fields to BAPI_TE_MARA and BAPI_TE_MARAX structures using append structures.
Populate two structures for the fields in BAPI_TE_MARA and BAPI_TE_MARAX.
To BAPI_MATERIAL_SAVEDATA, under EXTENSIONIN parameters, pass structure name as BAPI_TE_MARA and Value Part1, 2, 3, 4 with the filled structure info.
Similarly append X structure as well.
Regards,
Ganga

Problem with updating DB table in using BAPI

HI,
The code below does not update the DB table even if the commit work is executed... is there something wrong or missing??? Thanks a lot!
Technically complete process Order
       CALL FUNCTION 'BAPI_PROCORD_COMPLETE_TECH'
         IMPORTING
           return = i_messages
         TABLES
           orders = i_orders.
         IF i_messages-type NE c_error.
           REFRESH i_messages3.
           CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
               wait   = 'X'
             IMPORTING
               return = i_messages3.
        ENDIF.

Hi this is your code right.
You have to check the return table not messages.
Check the return table is there any message type is there with 'E' .
if it is there then the commit work won't give the result in fact the BAPI function is not executed successfully.
If you got any Error message in return table please have a look into that table errors and take the necessary action.
Pass the required paramaters for the BAPI function module.
Regards,
Madan.

Update the table SCMG_T_CASE_ATTR using BAPI

Hi Experts,
I have query regarding bapi BAPI_DISPUTE_ATTRIBUTES_CHANGE.
what are the values to be passed in attribute of tables section.
I have pass field name as 'closed_by' (of table SCMG_T_CASE_ATTR) in parameter of bapi (ATTR_ID).
And attr_value field with 'test'.
Please help me to update a field value like 'closed_by' of SCMG_T_CASE_ATTR using this bapi.
Thanks in advance,
Sahil

Hi Cristobal,
Thanks for helping me, however the function does not give me any results, the problem is that this document is a linked object, and not an attachment.
Thanks for your help.
Best regards,
Adriana

How to update the Weekly data using BAPI for MD61

Hi All,
i have used two BAPI's in my Z program to upload data from flat file to sap-system (BAPI_REQUIREMENTS_GETDETAIL and BAPI_REQUIREMENTS_CHANGE) and i uploaded the Monthly Data from the flat file on sap system successfully.
but i have to also upload the Weekly Data on the sap system using BAPI.
is there any BAPI for the same or what can be the solution for the uploading weekly data on sap system ?
Please reply me.
Thanks in advance..
Edited by: Prajapati_Shyam on Dec 29, 2010 4:19 PM

Hi Jovito,
thanks for your reply,
i developed a Z program to upload monthly data as well as weekly data into tcode MD61 by selecting the radio button weekly or monthly but i am not able to upload the weekly data as i didnt' get any BAPI OR any other logic to upload weekly data Or not able to use the existing BAPI BAPI_Requirement_create , because the upload file is in monthly format.
MD61 tcode can be used for both data (Monthly or weekly data).
can you suggesst me any BAPI to upload the weekly data or any other logic for the same
thanks & regards
Prajapati

In MM02 I want to update in Costing2 tab using BAPI

Similar Messages

Maybe you are looking for