In monitor I didnt see the receiver

Hello Friends,
Regarding the Enhanced Receiver determination.
I am working on the below blog "Illustration of Enhanced Receiver Determination - SP16
I have done the design in IR as below
1) Created two data types (one input,one output)
2)Created respective Message types..
3)Created two Interfaces (one for the outbound ,one for Inbound)
4) a) Created message mapping from the input to SAP BAsis--> Receivers mesage type
b) Created message mapping from the input to output based on some logic(I prefered greater than logic here)
c) Created message mapping from the input to output based on some logic(I prefered less than logic here)
5) Created MI for the above three...
and in ID as below
1) created three different Business services and assigend input interface to one Business interface and the other output interface to the remaining two Business services.
2)Created three comunication channels and assigned to the above respective Business services.(Adapter :1 sender ,2 receiver File Adapters)
3)one Receiver determination (Extended)
4)two interface determination
5)One sender agreement
6)two reciever agreement.
I am getting error ....
in sxi_monitor its unable to find the receiver
what could be the reason ...Could any one guide me on this...

Hi
This is cash problem, refresh it.
Prolem will be solve

Similar Messages

When I search for sent mail, I only see the sender of the mail (me). I want to see the receiver. How can I change that?

When I search for sent mail, I only see the sender of the mail (me). I want to see the receiver. How can I change that?

What kind of mail? gmail?
Maybe this:
Sent folder only show senders name in mail apps

TS3682 i had a iPhone 4 and then got a new computer, i installed iTunes but i couldnt sync with my iTunes it didnt see the iPhone, i got a new iPhone 5C and up dated it via iCloud and still my computer will no sync with the phone, again it fails to see it

Hi
I had a iPhone 4 and then got a new computer, I installed iTunes to it but my new computer refused to sync with my phone, i backed up my phone via icloud and purchased tracks etc from iTunes, but now i have a new iPhone 5C and I backed it up via the icloud, not all data was transfered, music etc.
Again my computer will not sync with the new phone, it doesnt see the phone within my libary, doesn't give an option to do any thing with phone
Can so one please let me know were Kim going wrong, I have authorized my computer to itunes I really don't know what to do now?

Need to Resume download to complete the ongoing Process.
Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
To save the photographs you may have to use third party software. Google is your friend.

Can't see the received messages in inbox

i use nokia n70.now im not able to see some messages send by one or two numbers.In log it is showing tat i hav received msg but i cant see it in inbox...
plsss can anyone help me ..

MAIL is in sync with GMAIL (forgot to add this info).

How to configure the monitoring computer to see the Xserve Raid

Finally I got My Xserve RAID.
I mounted It using disk utility as a single big disk.
But i don't know how to use RAID Admin since no List of System on subnet is present.
How do i change these setting on the monitoring computer?
I can write to the Xserve and i can read from it but I cannot use RAID Admin.
The fibre Channel utility is working well, do I have to change the setting of the PCI card?
I'd like to leave It as a single 2.7 Tb disk RAID 5, but sliced in smaller disk (Lun ?)
Please Help.
Thank you in advance
umberto

Now IT is Buidilng the Raid 5 across all the 7 disk. I unmount it from the desktop and shut It down via Raid Admin
Building a RAID 5 array takes hours. You can't shut the RAID down while it's doing this, otherwise you will lose the array settings.
I removed the older system and I added a new one that It has a different IP.
Once you connect with RAID Admin you should change the XServe RAID's configuration so that it has an IP address you can remember. If you leave it set to DHCP then it will probably change addresses every time you start it up.

HT5622 i got a new iphone however i am having trouble signing in to my icloud. I last signed in at the apple store on monday however i didnt see the technician sign out

I have just recieved a new iphone however i cannot log in to my icloud. i last logged in on monday at the apple store however since then no luck. i did notice the techician did not log out of my account.

Go back to the Store.
tamz87 wrote:
.... i last logged in on monday at the apple store .... i did notice the techician did not log out of my account.
What does all this mean?

I have HDMI connection to the receiver and on to the TV - but no audio from my new Apple TV. I have checked all connections and the video is xlnt. Have also toggled thru every possible Dolby/Audio combination in settings. Help! Any suggestions?

I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV. Not for movies, music, YouTube etc.   I have checked all of the connections and the video is xlnt. Have also toggled thru all possible Dolby/Audio combinations in settings. Help! Any suggestions?

Hello again Parker -
The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor. To that I added the Apple TV. The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor.
[I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
So now I have:
     HDMI from the Cable Box to the Receiver
     HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
     HDMI from the Receiver to the Monitor
     RCA's from the Receiver to the Subwoofer and the other speakers
In addition I have some backup connections:
     S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
     S-Video from the Receiver to the Monitor
Wait - JUST FOUND IT!
By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links. The video moved but the audio didn't. Turns out the monitor was using the optical audio feed from the receiver. So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed!   Looked promising...
So I first connected an optical audio feed from the ATV to the receiver - Audio! Then I pulled it, but the audio didn't switch to the HDMI feed. It stopped. Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
This is becoming a career! Any suggestions?
Will

I recently purchased an Onkyo stereo receiver with a wireless USB adapter, UWF-1, and want to stream audio from my MacBook Pro through my stereo system. The receiver tells me it is connected to my wireless LAN, but I cannot get music to play?

New to the community here, thanks for your patience. I recently purchased an Onkyo TX-8050 Network Stereo Receiver with the UWF-1 USB adapter with the intent to stream audio from my MacBook Pro to the stereo. I have gone through the setup instructions for the adapter and the receiver gives me a message saying that it is connected to the password protected network, but that is as far as I can get.
I have gone into iTunes and clicked on the "Open Stream" option, but I just get a pop up box labeled "URL" that is empty. I have Home Sharing turned on and File Sharing turned on, but I am not seeing the receiver in my Finder window or as a iTunes device.
I would appreciate any and all advice and assistance.
Thanks so much.
Dan

So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

Enabling to see the Source payload for synchronous Interface

Hi Experts,
Am working on a SOAP <-> RFC synchronous interface and PI version is 7.4 dual stack. Am unable to see the source payload when a
message is triggered from the Source Webservice. I can only see the receiver payload in RWB for request msg i.e the RFC payload.
Even for Response, I can only see the receiver payload which is sent to webservice and not the source payload from ECC on the RFC.
I have built the interface using ICO. I have made the changes in NWA, by setting the RemoveBody field to false.
Please let me know if any other settings are required. I have checked all other threads related to this issue and could not find the solution
to my issue where only the source payload in the synchronous interface is missing. In case of Asynchronous interface, the source payload
is visible.
Please assist me how can I enable this.
Regards,
Vish...

Hi Vishwanath,
Please check the below blog
Message Staging and Logging Options in Advanced Adapter Engine of PI 7.3x
regards,
Harish

When exporting 708 captions from Premiere Pro CC I only see the first 708 caption. Help?

Hi, our company just switched from Final Cut Pro 7 to Premiere Pro CC and we went from macs to PCs. I use the CaptionMaker program to create .mcc 608/708 caption files that I import into premiere, and I'm having a problem with the 708 captions. I embed the 708 captions in an mxf op1a file (I'm attaching a screen grab of my sequence and export settings) that I then copy to an XDCam disc, but when I play the disc back and check captions through our QC monitor I only see the first 708 caption and then the rest never appear. The 608 captions are there, but just the first 708 shows up. I've also had this problem when I print to video and when I create the captions in premiere instead of importing a caption file from CaptionMaker. And I was able to see 708 captions on a source that was captioned out of house so I know my QC monitor is working properly. Anyone have any ideas or suggestions for me to try? Thanks for your time.

I am not sure what product the dubbing house is using to master the tape. I will try to find out. As far as the file creation, I am using MacCaption to create the 608 & 708 .mcc file. Bringing this in to Premiere and exporting out the MXF file. I have contacted Telestream, the owner of MacCaption, there head of support says that other customers have had the same problem exporting out of Premiere. They have tested caption files and the files are fine that this is a problem in Premiere.

Cannot see XI receiver CC in monitoring

Hi,
I cannot see XI receiver CC on the communication channel monitoring. I understand it doesnt reside on ABAP stack and should be listed in the list of CC.
All cache refreshes are done FYI.
Venkat.

Hi Venkat
refer the similar thread , which is solved
Communication Channel Monitoring Error
Re: Comm channel missing in comm channel monitoring
Communication Channel Monitoring Error
Regards
Abhishek

How do I get my Mac Pro to see the second monitor through a video splitter and/or switcher?

In a recording studio we have a Mac Pro with two video display monitors in the control room and we want to be able to show the content of the second monitor to the person in the recording room on a big display monitor there. However, when we interpose a switcher or splitter between the computer and the second monitor so that we can (with a switcher) switch the second monitor signal from the control room monitor to the record room monitor or (with a splitter) split the signal to go to both monitors, we have no luck. On startup the computer does not see the monitor through the switcher, so it doesn't recognize its existence. If we start the computer up without the switcher in the signal chain, it sees the second monitor just fine, and (weirdly enough) we can then change the cabling to interpose the switch, which then works to switch back and forth between second monitors (control room and record room), but that cable swapping's a royal PITA. We want a simple solution that will allow us to start up the computer, see the second monitor in the control room, then choose to show it to the person in the record room with a simple flip of the switch (or even better, split the signal so it's available both places). The splitter we've tried most recently is this one: http://tinyurl.com/curen39 I'd appreciate any advice from people who have tried this configuration or something similar with success. We have a full ProTools HD Accel 3 system installed, so there's no room to install a second video card. Thanks.
Mac Pro 8-Core 2.4 GHz, OS 10.6.8

Christopher Dobrian wrote:
Thanks for the response! Yes, it's a 5x70 video card, a 5770 I believe. In any case, it does have the three ports, but (a not-well documented fact) that doesn't mean one can really get three full-resolution signals out of it at one time, as you alluded to in your message. So, yes, we did try hooking all three up directly to the computer, but the computer would only recognize two of those monitors, and the only way to get it to "de-recognize" the second monitor and recognize the third monitor was to physically disconnect the second monitor.
I did say when you want to connect three monitors to 5x70's there are some rules to adhere to. These are covered in the first two apple docs mentioned above, or by title:
Mac Pro (Mid 2010), Mac Pro (Early 2009): Issues with three displays and multiple DVI, HDMI connections
Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
The general gist of these rules is that to drive three monitor son a 5x70 you need two active adapters. That is why one of your monitors was disabled when you tried to add a third.
Here's a good explanation of what's going in here and why you need two active adapters on these cards:
Active vs. Passive Displayport adapters *the truth*
If you use DVI monitors and any of them have resolutions less than 1920 x 1200 then you can use single link active adapters. The "AMD Eyefinity Validated Dongles" chart shows some active (and passive) adapters that are acceptable. For example of a single link DVI active adapter is the Accell B087B-006B. An example of a dual link DVI active adapter would be the one from monoprice.com if you need to connect monitors with a resolution greater than 1920 x 1200.
I'm doubtful that SwitchResX would be able to convince the computer that there were only two monitors connected and direct the second monitor signal to the correct place, but it certainly seems worth a try, so thanks for the idea! Any other ideas are still welcome in the meantime.
I'm not doubtful. It is a very powerful utility for dealing with all aspects of multiple monitor configurations (they call them "Display Sets") complete with forcing EDID information if necessary. The different configurations can be controlled with a (contextual) menu and/or hot key.
SwitchResX is academic at this point if you want to have all three monitors connected. You would need to get that working first. Then use SwitchResX to vary the configuration combinations. So if you go this route the "name of the game" is figure out the active adapters you need.
I only described in general terms above about the adapters since you never said exactly what kind of connections these monitors require (single link DVI, dual link DVI, hdmi, mini-displayport, vga).

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ?

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ? I am overly frustrated. Please help. Not exactly sure which operating system I have. It is a dell laptop with xp.
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72

Well I was able to successfully revert back to iTunes8. Here's my steps:
1. In Add/Remove Programs I deleted all Apple products (iTunes, QuickTime, Safari, Bonjour, etc.)
2. I then check C:\Program Files\ and made sure all folders were deleted (QuickTime, etc.)
3. I then ran a Registry Cleaner program to make sure all entries from Apple products were removed.
4. I then rebooted my PC
5. I then downloaded iTunes8.0.2 from here: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
6. After it installed it said it could use my iTunes library file because it was created with a newer version. So I re-created my library by following these steps: http://support.apple.com/kb/HT1451
It took some time but iTunes is now back up and running. And I have all my playlists, etc. I haven't tried to sync anything yet. I'm just thrilled to have my iTunes back!

If two iPhones are linked to the same Apple ID can the other phone see the iMessages I'm sending, received or both?

If two iPhones are linked to the same Apple ID can the other phone see the iMessages I'm sending, received or both?

Yes, if both devices is using the same apple id for imessage.

Someone made a purchase from my Apple ID to a device that was not mine – I received an email stating that this happened, yet the only solution that Apple gave me was to change my password. I can see the $20.00 purchase that was not uploaded to any of my d

Someone made a purchase from my Apple ID to a device that was not mine – I received an email stating that this occurred, yet the only solution that Apple gave me was to change my password. When I look at my account, I can see the $20.00 purchase of music volumes that I did not purchase myself and was not uploaded to any of my devices; however, I cannot find a solution to getting my money back or to file a complaint against the unknown person that did this. Additionally, how do we prevent something like this from happening again, especially when I have an iPhone? What can I do in this situation?

Thank you for the suggestion. I did change the password; however, I generally will purchase gift cards to link to the account so that if something like this ever happened it would not be taken out of a credit card or bank account.

In monitor I didnt see the receiver

Similar Messages

Maybe you are looking for