In mountain lion does the late 2011 macbook pro back up while it is asleep
In Mountain lion does the late 2011 macbook pro back up while it is asleep?
No. No computer backs up while asleep.
Similar Messages
-
I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?
A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
(121465) -
Is there a compatibility guide for SSDs in the late 2011 macbook pro model?
Is there a compatibility guide for SSDs in the late 2011 macbook pro model? I'm looking to purchase a 15.4" Late 2011 Macbook pro and was looking a SATA3 SSD that was supported (outside of the ones provided by Apple). Does anyone have any success stories they wish to share? I assume the problem with secondary bay and SATA3 has still not been resolved.
Have you looked at the OWC web site? They specialize in Mac peripherals and they have a good line of SSDs and secondary bays as well. My experience with them has been good but I am not ready for SSDs. For my needs the cost/benefits are not there.
Ciao. -
crucial memory co says that you can put 16 g ram memory in the later 2011 macbook pro 17" 2.4 i7 quad core, True?
DDR3 PC3-10600 • CL=9 • Unbuffered • NON-ECC • DDR3-1333 • 1.35V • 1024Meg x 64 • • Part #: CT3327381nope - no difference than running with 4GB......Apps however, open much faster with 16GB....
you'll also have 0 page outs and 0 swap used...
see image... -
Late 2011 MacBook Pro (Mountain Lion 10.8.2) backlight keyboard not functioning properly?
I have a late 2011 MacBook Pro running OS X Mountain Lion 10.8.2 and for some reason, the automatic backlight keyboard will not funtion as it should. When I have the "Adjust keyboard brightness in low light" option enabled in settings, and I turn on the lights, my backlight keyboard stays at full brightness. Then, when I turn off the keyboard, then the lights, the keyboard does not turn on! Correct me if I'm wrong, but I am pretty sure that this was a feature in the MBP lines.
Try a SMC reset. Shut down the computer. Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected. On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. Release all the keys and the power button at the same time. Press the power button to turn on the computer. Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
-
What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also, should I avail myself of something that works with the Thunderbolt or Firewire connections? I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).
Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
There does seem to be a lot of prep to make it work:
"1. Preparation to install your new shiny SSD
1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
Also in those reviews:
" Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
Personally I only deal with OWC:
http://eshop.macsales.com/shop/SSD/OWC/
They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
As far as value for price:
http://eshop.macsales.com/item/OWC/MES3FH7500G/
500 GB for $130.
However as far as reliability is concerned:
http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
So sudden power loss is an issue with SSDs.
Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable. -
i have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd
steve359 wrote:
Sorry ... I read but was unfortunately distracted from your original post. You have a system that came with Lion. The Lion that is on your system is only for your computer and cannot be downloaded from the app store again because you never purchased it officially through the App Store.
Try this for making an external USB/DVD copy of Recovery on an external disk. internet is still required for reinstall, though, I believe: http://support.apple.com/kb/HT4848. But at least you have a separate Recovery Partition if you ever need a fully new and empty internal disk.
Your assumption is incorrect. Although he may not be able to download it from the App store he can download it directly for the Apple servers using the recovery partition on his original drive.
All you have to do is start the install routine and then point the install to an external hard drive. Once the download is finished the computer will reboot to start the install. At that reboot disconnect the external drive so the install can not start. Boot the computer back into the OS on the internal hard drive, which is what will happen automatically once the external drive is disconnected. Then connect the external and copy the files from it that were downloaded. Right click on that downloaded package file and select Show contents. In the contents of that package is a file called InstallESD.DMG. Copy that file out of the package and burn it down to a DVD or USB thumb drive and you now have the Full Lion Installer. I have several of them laying around on different hard drives and 2 USB thumb drives which I have used to reinstall Lion on my 15" MBP.
Sorry OP I should of just typed this out in my first post. -
I have a mid 2009 and a late 2011 MacBook Pro, they both have the latest upgrade of Lion. Neither of them can "see" each other in AirDrop. I have reset the apple ID on both. Is there any way I can make them "see" each other?
As far as I know the older mac is compatible with AirDrop.
ThanksSo by dual-signal, are you referring to 2.5Ghz/5Ghz signal?
I'm pretty sure my Mac mini 2011 has that but for whatever reason I cannot send via AirDrop to the mini. The mini can see other computers like my 2010 MacBook Pro and send files to it, but not in reverse. The MBP is unable to see or send to the mini unless the mini has engaged it to send a file to MBP. Even then it's temporary and the mini will disappear from the MBP's AirDrop radar upon completing the delivery of its file.
So I'm a bit perplexed on how the Mac mini has AirDrop, can see other AirDrop computers and send files to them, but cannot be seen on other Macs to reciprocate. -
I have a late 2011 MacBook Pro with 10.7..5 what is the next upgrade for this?
MacBook Pro 10.7. 5 late 2011 next upgrade
Another upgrade which may come first if not already, is to RAM with an increase in total capacity.
Maximum Memory 16 GB (Actual) 8 GB (Apple)
Memory Slots 2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
•MacBook Pro: How to remove or install memory - Apple Support
An example of reputable upgrade RAM source of matching spec to Late 2011 MacBook Pro:
http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_133 3MHz_SDRAM
Given Mavericks OS X 10.9.5 is said to no longer be available, you may wish to try your luck first
with Mountain Lion 10.8.5 just in case your older computer does not like Yosemite 10.10.1. From
what I understand, you'd likely pay a fee to get & use Mt Lion. That may be worth it, if the unit
does not prefer Yosemite; and it may be difficult to revert to an older one after installing 10.10.
Good luck & happy computing! -
Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?
Welcome to the Apple Support Communities
AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
You have two possibilities:
1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program -
I have a late 2011 macbook pro running OSX Lion, and it wont update the firmware to 2.7, it downloads the update then says its installing it but when i go back to software update it keeps coming up saying it needs to be updated. Im wondering what can i do to stop this or get it to update.
Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.
-
I have an apple TV 2 which mirrors my ipad and iphone beautifully. I want to do the same with my 'later 2011' macbook pro but there is no option I have checked firewalls and done all updates etc but no joy...PLEASE HELP!
According to:
http://www.apple.com/uk/osx/specs/
Your MBP should be compatible, BUT it needs to be running Mountain Lion.
AC -
So, I think the title says it all, but to give you a little more info:
I connected my late 2011 MacBook Pro to my TV using a Thunderbolt HDMI adapter, and closed the lid. When I opened it, it wouldn't show the login screen, so I restarted using power button. Got stuck at the Apple logo with the spinning wheel. So I booted the Recovery HD and found out it was a HD problem, so I (reluctantly) erased the HD and installed Lion from scratch. When it rebooted (after DOWNLOADING the Lion components) I got some terminal commands (sorry for not being more specific, still a noob when it comes to Mac) and then the screen faded and a message appeared saying I needed to reboot the computer. So I did. 3 effing times. Then I got stuck AGAIN at the spinning wheel, and I'm currently with that on my screen. I'm trying the forums before calling Apple (my computer's still within the 90 days of warranty) because it's not yet 9 A.M. where I livecan you go back to recovery mode then open disk utility.
in disk utility, higlight the disk, the one saying the brand and size then click on repair disk under first aid tab
if it repairs fine, that's okay
if repair was not successful, go to partition and change current to 1 partition then apply
install lion again
hope this helps -
I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion
NicholasLiban -
When you use the Lion restore as described, it does a fresh install on the hard drive that you can select at the beginning of the process. This provides a complete install of the very latest version of Lion, including the recovery partition. The drive that you choose for the installation destination winds up like what you would have on a brand new computer from Apple.
- Randy -
I downloaded Mountain Lion in my i have macbook pro retina display last month. but I don't get airplay the option on my macbook. I went to display preferences, but the airplay is not available. What is the next step?
You also need:
Apple TV (2nd or 3rd generation) with software update v5.0 or later.
Maybe you are looking for
-
International travel and multiple-day events with time zones
I can't see how I can set an international travel easily as one event, e.g. from 2010-01-11 20:30:00+11:00 to 2010-01-11 07:10-10:00. I can set both as in one Time Zone, but that is not what I want. I want to set as my itinerary from a travel agent s
-
Re-downloading deleted songs? (with a twist)
Hey all, So I got a new iPhone and downloaded the new iTunes (haven't used either in many years) and I figured 'what the heck ill figure it out.' So in my haste I started clicking the "cloud" icon next to most of my albums thinking I had to download
-
Crosstab Formatting Crystal 8.5
I have a crosstab that I am trying to format. I have done most of the work but this (hopefully) last two parts are annoying. First Issue: Layout: Rows are Names Columns are Categories Summarized Field is sum of amount (for each name for each categor
-
Prevent a command to show up in the command history
Can I prevent a command to show up in the command history? ITextModelCmds::TypeTextCmd does what I want but since I'm calling that command to update some text in order to stay synced with a change the user did, I don't want it to show up in the comma
-
This is crazy....iphone 6 delivery
I'm really not happy with the support from this company and the craziness surrounding delivery dates. I ordeedr the iPhone 6 64gb great and it went through at 315 est bc the servers were overloaded. at the order confirmation page it said delivery da