In MSS PCR Send button not working

Hi,
We are trying to implement ESS/MSS 1.0 SP 8 on EP 7.0 SP 11 and ECC 6.0. We are using the application on https. SSL has been configured and is working fine. We are using PCR under MSS, which also runs on https. SSL for ADS has been configured and we are able to see the PCR pdf forms. Now when we try to edit the form, and click Send button (Review Form and Save phase) its going on to the Completed page, rather remains in an un ending state. The Completed page is not showing up. We tried to use the application on http and everything is working fine.
Please help.
Regards,
Piyush.

Solution:
When you configure HTTPS make sure you dont get a popup window of the certificate and even if you get all the three items (like trusted name, expiry etc) should be green and no warning.
Regards,
Piyush.

Similar Messages

  • "Send" button not working in Mail

    Picked up Leopard on an iMac two days ago. Some of the time when I compose a new email, Mail works fine--I click "send" once I'm through typing and out it goes.
    Other times--like this morning--I try to send an email and the "send" button is transparent and does not click. This is not a server issue. I tried adding the recipients to my address book in case there was some weird thing where that had to be done first. But to no avail--the "send" button won't click, nor will the "send" command within the toolbar or drop-down menus--and so I have no clue how I'm supposed to send this email if the button to do it is not working. Help!

    Unfortunately, the SMTP and outgoing mail settings aren't the issue. The issue is that the "send" button is visible but un-clickable. I tested sending mail from all of my accounts and it works just fine--sometimes. Other times, I try to reply to an email or send out a new one and the "send" button does not allow me to send anything at all.

  • Send button not working on Droid

    I have a customer trying to sign a document using a Droid. They can fill in the signature but the Send button is not working.

    Hi,
    Please can you contact support , https://echosign.zendesk.com/hc/requests, and provide them with as much detail on the issue as possible including any screenshots. They can then investigate this for you.
    Thanks,
    Jat

  • Send button not working when text message

    When I was texting message with my friends, all of sudden I can't type the respond message unless I have to quit and try to text my friend again. The problem is the box where you typed your message is gray out and "Send" button is inactive or gray out. This problem occurs when I upgraded my iphone 4s to iOS 6.1
    Please help.

    After Update today, SEND button no longer activates keyboard. I tapped message window area and that activated the keyboard. SEND button worked to send message. (Not sure how to describe that "message window area", but its the area where your message shows as you type.)

  • TS3274 Send button not working

    I'm trying to send a message but send button is not working. It's always either light blue or gray. Help!

    Make sure both parties have enabled iMessage
    Settings>Messages>iMessage>On

  • Send button not working on sms after upgrade

    My send is no longer working on sms after i upgraded. I have done factory setting and still not working . Any ideas of anything else i can try ? frustrated

    I have same problem. Can open message. As if keyboard is frozen.
    Unable to type then send. Also, tried shutting off preview.

  • Send button not working in imessages

    I'm trying to send a test message to myself in imessages.  I type the message but the 'send' button never gets enabled

    Try here:
    iOS: Troubleshooting Messages
    Also, I am not sure you can send one to yourelf.

  • Email 'send' button not working

    I have an odd problem.
    The 'Send' button on my Mail application is greyed out so I can still receive mail but I can't send any.
    Has anyone any experience of something odd like this, and if so, what advice would you offer?
    Thanks in advance.
    K

    Kieran,
    Did you look at these two kb articles:
    http://support.apple.com/kb/TS3276
    http://support.apple.com/kb/TS1307
    First is for 10.6, second for 10.5, but both have essentially the same thing for a dimmed send button...make sure the SMTP server is not set to none.
    Ralph

  • BEX Analyzer Send button not working

    When we go to BEX Analyzer, run a report and then click on the Send button, we don't get the Send email screen. All we get is a blank IE pop-up. Any help?? We have SCOT configured properly.

    Make sure you set profile parameter from the attached note.
    https://service.sap.com/sap/support/notes/972514

  • Bex Launcher Send button not working

    Hi,
    Iam using BI 7 / 2004 s. When I execute a query from query designer, it opens in a portal page/ Bex launcher. When I hit the send button it gives an error 404 not found.
    Can anyone pls tell me what setting has to be done to overcome this error.

    Make sure you set profile parameter from the attached note.
    https://service.sap.com/sap/support/notes/972514

  • Phone version: Contact form "Send" button not working

    The "Send" button on the contact form works when used through a laptop browser, but doesn't work in a cell phone browser.  I've tried it with an iPhone 6 and Samsung Dart.  Any help is appreciated.
    Phone:
    http://www.landcordesign.com/phone/index.html
    Desktop / Laptop:
    http://www.landcordesign.com/index.html
    Thanks for the help,
    Jack

    Sanjit,
    I uploaded the file to box.com (Adobe Muse - Box).  Let me know what I need to do to fix the problem.
    Thanks,
    Jack

  • Send Button Not Working...

    A friend of mine purchase an new Intel iMac. I transferred all her data across from her old iMac but now she is unable to send mail.
    The mail button is greyed out... Not only that, when she tries to type in the Subject field, she can type a few letters and then she cannot type any more.
    For testing purposes I created a new user account and Mail works fine there... So the problem seems to be related to the import of her mail.
    Any suggestions on what I should do or try?

    This particular problem in Mail is usually caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services. The notes at the bottom of the article also provide information about the side effects of deleting each of the files involved.
    Resetting Launch Services
    The following article also describes the side effects of cache cleaning:
    Side effects of System cache cleaning
    The following article provides links to some utilities that can be used for troubleshooting and cache cleaning:
    Resolving Disk, Permission, and Cache Corruption
    It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner.
    In addition to the utilities mentioned above, you may also consider OnyX, which is free. If you want to try OnyX, after installing it, do this (be sure to read the articles about the side effects of cache cleaning first):
    1. Quit all applications.
    2. Launch OnyX and enter your administrator password.
    3. Click Maintenance. In the Reset section, check LaunchServices database.
    4. You may uncheck any other pre-checked options if you've already done them using other utilities.
    5. Click the Execute button.
    If that doesn't solve the problem, you may try again checking the Links between documents and applications option in step 3 instead.
    And yet another free cache cleaning utility is Cache Out X.
    Please, let me know whether you were able to solve the problem, what worked for you and what didn't.

  • MSS PCR Team viewer Not working Poeperly when nodata available

    Hi
    We have implemented MSS Business package for Nw04 Sp18 portal and ERP2004 system.
    When using PCR team viewer list, we observed strange problem.
    We have created 4 views in r/3 side using  OADP img .all the views are displaying data correctly ,when each view has data available at back end, for any view if doesn't have data its showing previous view data instead of showing "no data found".
    But it’s working fine in QA portal, in DEV system we found this strange behavior. We compared all the config b/w two systems, not able to find the problem. Any one has any suggestions most welcome.
    Thanks in advance
    Gopal

    Not sure that I understand the issue here - are you saying that there are directly reporting employees who are not appearing in MSS unless the manager has SAP_ALL authorisation?  Are you also using HR structural authorisations?
    You do know how the standard "Direct Reporting" view in MSS is supposed to work?  As in, which employees you should be expecting to appear?
    The "Direct Reports" option uses an evaluation path called MSSDIREC, which references a relationship called B900 "Manager under manager".  Relationship B900 uses program RHDIREPO to find the relevant objects.
    For us at least, the standard "Direct Reports" only returns (1) employees in the same Org Unit as the manager, (2) employees in subordinate Org Units that do not have an occupied Chief position, and (3) managers (i.e. Chiefs) in subordinate Org Units.

  • ROS Questionnaire - send button not working

    hello,
    we're working on ROS scenario for SRM 7.0
    after the submission of the supplier registration form, the vendor receives an email that contains the URL of the questionnaire. when the vendor clicks on Send Questionnaire button, the confirmation text "Thank you for participating. Your questionnaire has been saved. " is not coming out, but we were able to receive the questionnaire. is there a missing configuration for this?
    thank you,
    kezia

    hello andrea,
    i suppose that the construction of questionnaire is ok as we are not encountering any errors in the submission and it is just a copy of the standard questionnaire.
    how do we install the ROS_FORM_RUNTIME? is there a sap note for this?
    many thanks.

  • TS2755 iMessage SEND button not working

    I can receive messages in iMessage but cannot send. Any suggestions?

    Thanks.
    Researched a lot of others , but your was the one that worked.
    Appreciate your sharing this great solution/ tip

Maybe you are looking for

  • Centering an image in Dreamweaver

    I am new to Dreamweaver CS4 and to CSS, despite several years of designing table-based layouts in Front Page. I've put a lot of time into training to understand the box model and I'm making headway. I have created a basic 2 column layout from scratch

  • About «networking» possibilities and limitations ...

    Hi, I experienced 2 major network crash of my little home network: iMac G5 (OS 10.4.11) + iMac Intel (10.6.2) + Airport Extreme Base Station. I don't know what I did exactly either times other than that I was experiencing with the network. I was eith

  • Return Delivery from Project

    Hi  All, How to generate return delivery from CNS0? The scenario goes like this. 1. Materials are attached to the network activities( both plant stock and Project stock materials exist) 2. Delivery request is created from CNS0 3. Goods are picked and

  • HR ABAP FAQs - Part 7 (ans needed)

    Hi, 1. What is the Additional Actions Infotype used for? 2. If an employee leaves the enterprise, are all Infotypes delimited? 3.What is an Infotype menu and what is its purpose? 4. What is an info group? What is a personnel action? 5. Which authoriz

  • Logic Pro X Interface

    I have an old Yamaha 01X with firewire. It works very well with my older Macbook running logic 9. OS 10.6.8 In the compatibility list for Logic Pro X, it states that the 01X is compatable with logic X, I have not been able to get this setup to work w