In my collection I have 500 pictures. In the folder that contains those pictures I have 1000. How do I get the ACTUAL folder to ONLY have the 500 that are in the collection?
In other words, I want to delete (from my computer) the 500 pictures that are in the folder that are NOT in the collection .....?
Eroxx1818 wrote:
I'll try and make it clearer ... I appreciate the help!
I have a folder on my computer labeled "Wedding Photos."
I imported that into Lightroom. It had 1000 photos
Once I imported it, I made a collection called "Wedding" and put those 1000
photos into the collection.
Then, in the collection, I went through the process of marking the photos.
I marked 500 as rejected. But instead of deleting them COMPLETELY from
Lightroom AND the hard drive, I only deleted them from the LR catalog.
So, now I have a collection "Wedding" with 500 photos and a folder "Wedding
Photos" with 1000 photos.
I only want the 500 photos in the "Wedding Photos" FOLDER.
Two things ... first, if you use Lightroom to move the un-rejected photos from "Wedding Photos" to some other folder, then you have remaining in the "Wedding Photos" folder only those photos which were rejected and deleted from Lightroom, but not deleted from the hard disk.
Secondly, there is absolutely no reason to import all the photos from a folder and then create a collection with the exact same photos. This is redundant. It is extra work for no benefit. Since the folder and collection now contain exactly the same 1000 photos, you only need the folder. Anything you want to do with these photos can be done from the folder, as if the collection didn't exist (which it shouldn't in this case).
Similar Messages
-
What do I do? Send it in? Bring it to the store? Or simply get a new one?
Hi !
bring it to the store.. its fast and the cost will be around 100$ CA... no need to get a new one..
good luck ! -
How do I get redeem code if I only have gift receipt?
I have a receipt for a $25 gift cards from Itunes, showing the correct email and that the credit card was charged, but I never received the email with a redemption code, so I could redeem it.
It was a Christmas gift from my son in another state.
How do I get the redemption code?
Thank you.What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
How can i get mountain lion if i only have 10.5.8?
Do i need to bay snow leopard first to get mountain lion? I'm sorry if my english suck
You also need to make sure that your computer can handle it: please see this page and checkthe 'Supported models' section.
http://www.apple.com/osx/specs/
If your Mac is not listed there you won't be able to run Mountain Lion.
If it is able to run it you will first need to buy Snow Leopard: this is no longer sold in the Apple Store but if you ring the Store for your country you may be able to buy it that way. -
adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?
I want the capability of adobe reader to just run on one screen.I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html -
I have an iphone4 and in the top right hand corner I have a padlock with an arrow circling it - what does it mean and how do I get rid of it ?
I have just found out it was the orientation lock lol ! Grrrrrrrrr Its puzzled me for weeks !!!!!!!!
-
I tried to log on my new ipad and forgot the password combination. Due to several tries the ipad is locked up. I remembered the password but my ipad is still disabled. How do I get it going again?
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
iOS: Wrong passcode results in red disabled screen
This will tell you how to restore
iTunes: Backing up, updating or restoring iOS software
If you cannot restore that way, you may have to use recovery mode
iPad: Unable to update or restore -
how do I restore all of my itunes content onto my newly installed computer drive? All my purchase are no longer in my account but I did back up the files onto an external hard drive. Now how do I get them back? Please
Ummals wrote:
...I did back up the files onto an external hard drive. ...
Did you follow all the steps as detailed here...
http://support.apple.com/kb/HT1751 -
The selected source contains no pictures
I cleaned downloads, now I've lost screen saver. I can't use a pic to relace screen saver, email pics or back them up. The message I get is, The selected source contains no pictures. Note: Iphoto has several thousand pictures, I can see them.
ThanksI have had some similar problems. I think mine were cause by "interference" from my Apple TV. By any chance do you have an Apple TV? I first notice the problem after viewing photos on my Apple TV as a screen show. When I was finished I just changed my TV back to the cable box, but did not do anything to the Apple TV. When I had the problem I went back to the Apple and switched it to something other than photos. Now my sceen saver shows photos again. I am guessing that the Apple TV some how locks the file such that the screen save can not get to it.
Good luck. -
In Aperture 3 and using File>Get Info, I'm told that many photos, which are 7+ Mb's are only One Mb or less. Are the full-sized masters held elsewhere, and if so how can I get to them. You've guessed I'm a newbie - just 2 months with Apple and I'm very confused - any advice would be gratefully received.
You should probably have this thread moved to the Aperture Discussion group and you’ll find lots of useful tips in the threads there:
https://discussions.apple.com/community/professional_applications/aperture
Are you looking at these sizes within Aperture using the metadata view or inspecting them outside using the Finder and Show Package Contents?
I am wondering how you are importing the pictures from your camera? When you import from your camera, the right side of your display window will have a lot of options that you can select to grab your images from the camera.
Does your camera shoot RAW+JPEG? If so, you may not be importing them correctly and only picking up the JPEGS. You can import them so they stay together or separate them. The master images are all at the Project Level whereas the views you see in Albums for example are aliases that point back to your Project.
Here’s a good Aperture web site (I have no financial or other interest in this site) to help you using Aperture:
http://aperture.maccreate.com/
This article talks about RAW and JPEG images:
http://aperture.maccreate.com/2011/05/24/matching-raw-files-to-jpeg-pairs-in-ape rture-3/ -
My macbook pro keeps saying I have 450 gigabytes out of 500 that are used. But when I look on finder there are no files that are anywhere close to that amount. I went through and deleted files from my mac and now I only have 10 gigabytes of additional space free. My mac now says I have 440 gigs of other that is used. But does not make sense, do I have a virus?
Since you have not identified the OS your MBP is using, these extract may or may not assist you.
http://pondini.org/OSX/LionStorage.html
http://pondini.org/OSX/DiskSpace.html
You may also download from the Internet OmniDiskSweeper (free) and open it it will show all of the files on your MBP and the respective sizes.
ciao. -
I want to switch stores from Japan to USA. I used to have an iTunes card, and there's 15 YEN left in my account, how can I get rid of that so I can start purchasing in the US store using my new credit card?
I can't seem to find an app that costs my available balance. iTunes said I need to spend it ALL before I can change stores. This means I cannot totally change stores.... Hopeless.
-
I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?
See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting
See KB Article: How to use your iPod to move your music to a new computer
-
I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup
Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support
Maybe you are looking for
-
Safari will not load from favourites or from links
Hi all. I have a eMac G4 using Leopard 10.5.6. (2 Gig RAM) I can not remember if this problem started after the last OS update or if it was here before as it has been some time since I last used the Mac . My problem: I open up Safari and click onto m
-
Need suggestion for new laptop
Hi, everyone I'm needing suggestions. I had a touchsmart tx2z however after nearly 4 years it has bit the dust couldn't be saved after its last crash computer would turn on but screen would stay black and ome of the keys like the caps lock would flas
-
SPA962 and 2 SPA932 - Last 5 lights are not working
I have a Linksys SPA962 with 2 SPA932. They have 64 extensions configured as BLF and retrieve status from an Asterisk PBX. All first 59 lamps work OK, but the last 5 don't. They stay flashing in yellow and never show the extension status. If I remove
-
I Need Help on HR Authorization. We have defined multiple Employee Subgroups. I want to block all actions for one of the Employee Subgroup. How can I do it. I tried as follows. Object : P_ORGIN Object Class: HR Authorization Level: * Infotype: * Pers
-
Deployment with encrypted Maxl files
Hi All, I'd like to know how encrypted maxl files work if I need to deploy them to different servers. This is, I create the maxl files to automate everytihng and I encrypt them in a test server. After deployment to a different production server, are