In my I pad air I cloud has been set up but when I try to log in it shows me a dialog box that maximum number of accounts have been created and home screen appears.      So what should I do to open an account in I cloud?

Suggest me some ideas guys.

There is a limit to how many free accounts can be created on a device - you will either need to use of the accounts that's already been created on it, or create another one on a different device/computer

Similar Messages

  • IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    If nothing else works, you might try this one. It has worked for many others ...
    Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414
    Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
    iPad 2 and iOS 8.0.2 Problems
    For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
    Here's one person's solution which will help a lot of iPad 2 users!
    keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
    Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
    SOLVED:  IOS 8 Issues on iPad 2:
    I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
    Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
    THE FIX:  FIRST, be sure you have a current iCloud backup of your device.  Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
    To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now!  :-)
    Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

  • I want to return my ipod but the serial number faded away and i dont have the reciet and the screen is broken. what should i do?

    my screen is broken and i want another one. the serial number fadad away and i dont got the reciet. it did have warranty. what should i do?

    You won't be able to return it.
    Did you cause the screen to be broken?  Or are you saying that it failed under warranty?
    If it's still under warranty, and you didn't damage it, then they should replace it.  They can plug it in to get the SN and look it up.  It has a 1-year warranty.
    You can enter the SN here (if you can read it) and it will tell you if it's still covered:
    https://selfsolve.apple.com/GetWarranty.do

  • When I try to sign on I get the message: Server can't be found. I have cleared cache and recent history -no luck. what do I do now?

    I am on a Macbook (laptop) operating with Mac OSX 10.6.8. I am using WIFI to sign on and have no trouble opening Safari yet every time I try to open firefox I get hit with the 'server can't be found error message. Oddly, all the bookmarks still work and open fine.

    This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.

  • HT201210 When I try to restore my ipod, I get a dialogue box that pops up that says the restore has failed because the requested resource cannot be found. What is the problem, and how can I fix it?

    When I try to restore my ipod, I get a dialogue box that pops up that says the restore has failed because the requested resource cannot be found. What is the problem, and how can I fix it?

    Hi IG viper,
    Placing your iPod into recovery mode should allow you to successfully restore the device.
    You might see these error messages if any of these are true:
    Your device has a beta version of iOS.
    You're trying to install an earlier version of iOS (downgrading).
    Your device has unauthorized modifications to iOS, also called "jailbreaking."
    Use recovery mode to restore your device to the latest version of iOS.
    Resolve iOS update and restore errors
    http://support.apple.com/en-us/TS3694
    Sincerely,
    Allen

  • When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    Hi
    And without info - it's near to impossibly to help. Try my general troubleshooting note:
    Troubleshooting note
    When iMovie doesn't work as intended this can be due to a lot of reasons
    iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
    problem in iMovie Cache folder - trash Cache.mov and Cache.plist
    Creating a new User-Account and log into this
    This forces iMovie to create all pref. and cache files new and error free
    Event or Project got corrupted - try to make a copy and repair
    a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
    version miss match of QuickTime Player / iMovie / iDVD
    preferences are wrong - Repair Preferences
    other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
    External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
    ( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
    USB-flash-memories - usually do not work
    Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
    iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
    This You do by
    First -  close iPhoto
    Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
    Thirdly - now select all five options presented
    THEN - WAIT a long long time (>20 hours are not strange)
    free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
    external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
    GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
    Screen must be set to million-colors
    Third-party plug-ins doesn't work OK
    Run "Cache Out X", clear out all caches and restarts the Mac
    Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
    Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
    In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
    (I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
    buenrodri wrote
    I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
    Last resort: Trash all of iMovie and re-install it
    Yours Bengt W

  • I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

    i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

    sos1der wrote:
    pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
    You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
    sos1der wrote:
    but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
    That's an entirely different issue, unrelated to your iOS devices.

  • I have a iphone4s and an ipod 4th gen, they both share same itunes acc, the ipod has its own email but when people try to FT it also rings on my phone, how do i stop it ringing both devices

    i have a iphone4s and an ipod 4th gen, they both share same itunes acc, the ipod has its own email but when people try to FT it also rings on my phone, how do i stop it ringing both devices

    That's because you're using the same Apple ID on both devices. On your phone: Settings>FaceTime>You Can Be Reached at>Remove your Apple ID.

  • My iphone 4 has been working fine but when i try to use music, it wont work. For example i try to put a specific kind of song and it will either not play or skip to another.

    my iphone 4 has been working fine but when i try to use music, it wont work. For example i try to put a specific kind of song and it will either not play or skip to another.

    read http://support.apple.com/kb/TS3217

  • I cannot delete music off my phone... I have gone to settings and the cloud stuff is gone.  but when I try to swipe left to right or right to left to delete songs I want off my phone, it just plays the song!!!!  How do I seriously delete music now?

    I cannot delete music off my phone... I have gone to settings and the cloud stuff is gone.  but when I try to swipe left to right or right to left to delete songs I want off my phone, it just plays the song!!!!  How do I seriously delete music now??

    Figured it out.

  • My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not workin

    My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks

    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Setting>:General>Reset>Reset Network Settings.
    - iOS: Troubleshooting Wi-Fi networks and connections

  • My ipad says it has an internet connection but when i try to access safari it says it is unable to as there is no internet connection, help!

    My ipad says it has an internet connection but when i try to access safari it says it is unable to as there is no internet connection, help!

    Tap Settings / General / Reset / Reset Network Settings.
    Restart your IPad. Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    If that doesn't help, try here >   Apple - Support - iPad - Wi-Fi

  • Me and my family have 2 game cetre accounts on one email, but when we try to log into one, we log into the other. Also, we cant start a new apple id

    Me and my family have 2 game cetre accounts on one email, but when we try to log into one, we log into the other. Also, we cant start a new apple id

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • I am trying to set up my new iphone 4s, but when i try to log into itunes it keeps coming up with server error. What do i do?

    I am trying to set up my new iphone 4s, but when i try to log into itunes it keeps coming up with server error. What do i do?
    <Edited by host>

    Some free advice.  If your son is 8 years old, put him on your account, and set parental controls so that he cannot accidentally run up giant charges within the games.
    If your son is 25 years old, get him his own AppleID and make him responsible for his own bills.
    In between ... use your judgement. 

  • I'm trying to use FaceTime but when I try to log in, the system tries to verify and gives me a number to call Apple to complete registration.  Is there anything I can do?

    I'm trying to use FaceTime from my IMac OS Version 10.8.5 but when I try to log in, the system tries to verify and gives me a number to call Apple to complete registration.  Is there anything I can do? 

    There is no official public documentation of that alert as far as I know.
    If you're trying to sign in to FaceTime, try to sign in to iMessage in the Messages application, or vice versa.
    Otherwise, do as the alert directs. According to reports, you won't be charged for the support call if you select "Apple ID"—not the hardware model—as the product you're asking about, and cite the "customer code" in the alert as the "validation code" when you speak to the Apple representative.

Maybe you are looking for

  • OPEN_FORM Error in transaction ME21N

    Hi Forum! On creation of a PO, I am unable to see the print preview for a particular vendor. The system is showing message OPEN_FORM Error in Document ______ Please Help. Thanks in advance.

  • Type conflict where type not found in sequence file

     Hi, from a central master sequence, I am starting several sequences from other sequence files in new executions. These sequences have individual types as input and output parameters, the types being defined within these sequence files. The master se

  • What is better GRPO or Goods Receipt?

    Hi All, I have an issue regarding to wrong A/P-CM, what should I do? Do I have to create again another transaction which is PO>GRPO or should I use Goods Receipt? Thanks, Lean

  • Oracle supported flavours of linux

    My company is planning to shift all it's oracle operations on to linux. We do not know which distributions of linux oracle supports. we work in products like oracle database, jserver, ias etc. Can you please suggest the distribution of linux we can g

  • Iterrate through an array of files

    I am having trouble with the following program, making to iterate through an array of three files, that are placed in a directory below the program directory. What I would like my program to do is to read 10 lines of each of the files in the subdirec