In my i phone 4s when i call the display moves or shrinks like a vibrate

Have you contacted your carrier?
Who is your carrier and where are you?
Is your carrier on this list? http://support.apple.com/kb/ht1937

Similar Messages

My phone ringtone is set to old phone, however when people call it is just a "buzz" notification (not old phone). Help!

My phone ringtone is set to old phone, however when people call it is just a "buzz" notification (not old phone). Help!

Try changing the tone to something else - see if you can hear the new tone.
Then switch back, you should hear Old Phone again.

Why can't I hear the phone ring when I call somebody, but if I put the speaker on it works

Why can't I hear the phone ring when I call somebody, but if I put the speaker on I can hear the ringing?

Don't jump all the way to restoring just yet. Check to make sure there's nothing in the headphone jack, and nothing covering the microphones (including the noise cancelling microphone at the top next to the headset jack)
1. Restart the device. http://support.apple.com/kb/ht1430
2. Reset the device. (Same article as above.)
3. Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
4. Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Hello, I have been unable to activate my new iphone 6. When I call the activation phone number it just says terms and conditions have been accepted on this account. Please help.

I have been unable to activate my new iphone 6. When I call the activation phone number it just says terms and conditions have been accepted on this account. Please help.

Same thing here. I love how they include this nice and easy to follow guide in the box and the KEY step for activation (the phone call) is a total fail. To verizon: the automated just says Terms and Conditions have been accepted for this number. Press 1 to enter another phone number in the order. Well, I HAD NO other phone number in my order. The message gives no other options. She repeats the same line 3 more times and after the 3rd time, it says please hold while we transfer you, call may be monitored etc. Guess what, its 2 am ET and customer service is closed?
Do you guys expect thousands of iphone customers to speak to a CSR just to activate? Why not just let us do it online? I have activated plenty of phones even LTE phones, online. Now I'm going to have to compete with the other 30,000 people who ran into this same problem overnight tomorrow on the phone....

I have an old iPhone 4 that finally stopped working. I have an unlimited data plan and want to keep it. When I called customer service, I was told like in the past that if you purchase the new phone at full price, you can keep your old plan. However, a

I have an old iPhone 4 that finally stopped working. I have an unlimited data plan and want to keep it. When I called customer service, I was told like in the past that if you purchase the new phone at full price, you can keep your old plan. However, after some time on the phone i was told by the csr and supervisor that their system is not allowing them to complete the transaction without changing to a limited data plan. I was told to try going to a store and buy the phone. Same thing happened. Has Verizon changed something and not told their employees?

Seems like people having this problem are those coming from a phone that doesn't have a nano SIM card...so when Verizon issues them one they end up changing their plan. No clue why this keeps happening but stay on top of them. As long as you initiated the request for your plan to be reinstated within the 14 day time frame they should put it back. Interested in seeing how this plays out. There is still one phone in my house that hasn't been upgraded (an iPhone 4). I'm hoping when we do upgrade it at full retail they won't mess with her unlimited data plan

I gave my husband my I-phone 4s when I bought a 6. his phone rings when someone calls me. What do I do to stop this?

I gave my husband my I-phone 4s when I bought a 6. his phone rings when someone calls me. What do I do to stop this?

Hi Mforesman,
Welcome to the Support Communities! The article below will explain what steps to take when you give your iPhone to someone else. Your carrier can help you transfer your husband's cell phone number to the iPhone 4S.
If your husband does not already have an Apple ID, you will need to create a new one for him, so that your contacts, calendars, notes, etc. in iCloud are separate from his. Once he has his own Apple ID and telephone number, these will be linked on the iPhone 4S and he will no longer receive your telephone calls.
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201351
Frequently asked questions about Apple ID - Apple Support
http://support.apple.com/en-us/HT5622
What is an Apple ID?
An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. You don't have to create a new account for each service—just use your Apple ID.
How do I get an Apple ID?
You may already have an Apple ID, and you only need one for everything you do with Apple. If you aren't sure, visit My Apple ID and click Find your Apple ID.
If you don't have an Apple ID, you can create one at My Apple ID. You can also create one by signing up for an Apple service (such as an iTunes Store or iCloud). You should use your primary email address as your Apple ID.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
http://support.apple.com/en-us/HT201349
Your iPhone telephone number is linked to your Apple ID when you sign in to FaceTime or iMessage. This allows you to use your iPhone number with FaceTime and iMessage on other iOS devices.
This feature isn't available on iPod touch (3rd generation) and iPad (1st generation).
This feature is available with OS X Mountain Lion v10.8.2 or later.
You can sign in to your Apple ID on an iPhone by tapping Settings > FaceTime and Settings > Messages > Send & Receive.
On iOS devices, find out which addresses are enabled with FaceTime and iMessage by tapping:
Settings > Messages > Send & Receive > You can be reached by iMessage at:
Settings > FaceTime > You can be reached by FaceTime at:
I hope this information helps ....
- Judy

My Contracted SIM is for an android phone, but when i put the sim in an iphone my 3g no longer works?..

My Contracted SIM is for an android phone, but when i put the sim in an iphone my 3g no longer works?.. Is it because my 3g is only active on the android os and not the ios platform? Texts, Calls and Wifi work fine but the 3g doesn't work. My phone only shows 'GPRS' in the top left corner. Also I get a message come up saying "Could not activate mobile data network. You are not subscribed to a mobile data service".
Any advice would be great.

Hi hexonxonx, I'm on o2. Thanks for your advice. You are right. All I had to do was change one of my APN settings to mobile.o2.co.uk and reboot my phone and this sorted it out straight away! Thanks again. Much appreciated . I was thinking I was going to have to go back to an android phone to use my 3g again but this eliminated that need. Thanks.

My visual voice mail is not working..i have done all the steps that I have seen on here to do. When I call the voice mail it says that there is not a box set up and I need to contact my system administrator.

My visual voice mail is not working..i have done all the steps that I have seen on here to do. When I call the voice mail it says that there is not a box set up and I need to contact my system administrator.

I have had voice mail set up on my phone for 10 years. When I did the last iOS update before 7 I guess it wiped out my voice mail. Can I not set it up myself? I haven't changed my message in years.

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

The new serial number is to the right of your chosen download.

HT5538 I have a different phone number when traveling, that the one registered in my account. How can I add it?

I have a different phone number when traveling, that the one registered in my account. How can I add it?

Lost information
https://www.adobe.com/account.html for serial numbers or subscriptions on your Adobe page... or
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(POHD) TYPE ZPOHD OPTIONAL
*"     VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*"      RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
         ls_pohdx TYPE bapimepoheaderx,
         lt_poit TYPE TABLE OF bapimepoitem,
         lt_poitx TYPE TABLE OF bapimepoitemx,
         ls_poit TYPE bapimepoitem,
         ls_poitx TYPE bapimepoitemx.
   MOVE-CORRESPONDING pohd to ls_pohd.
   MOVE-CORRESPONDING poitem to ls_poit.
   ls_pohdx-comp_code = 'x'.
   ls_pohdx-doc_type = 'x'.
   ls_pohdx-vendor = 'x'.
   ls_pohdx-purch_org = 'x'.
   ls_pohdx-pur_group = 'x'.
   ls_poit-po_item = '00010'.
   APPEND ls_poit to lt_poit.
   ls_poitx-po_item = '00010'.
   ls_poitx-po_itemx = 'x'.
   ls_poitx-material = 'x'.
   ls_poitx-plant = 'x'.
   ls_poitx-quantity = 'x'.
   APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
   EXPORTING
     POHEADER                     = ls_pohd
    POHEADERX                    = ls_pohdx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
*   PARK_COMPLETE                =
*   PARK_UNCOMPLETE              =
* IMPORTING
*   EXPPURCHASEORDER             =
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
TABLES
    RETURN                       = return
    POITEM                       = lt_poit
    POITEMX                      = lt_poitx
*   POADDRDELIVERY               =
*   POSCHEDULE                   =
*   POSCHEDULEX                  =
*   POACCOUNT                    =
*   POACCOUNTPROFITSEGMENT       =
*   POACCOUNTX                   =
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
*   POLIMITS                     =
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
*   POSRVACCESSVALUES            =
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
*   POCOMPONENTS                 =
*   POCOMPONENTSX                =
*   POSHIPPING                   =
*   POSHIPPINGX                  =
*   POSHIPPINGEXP                =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
*   INVPLANHEADER                =
*   INVPLANHEADERX               =
*   INVPLANITEM                  =
*   INVPLANITEMX                 =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

Connect to iTunes and try to reset it from there.

When I get a message it only vibrates even though all sounds are on and when someone calls the sound works perfectly normal.

when I get a message my iphone 4s only vibrates even though all sounds are on and when someone calls the sound works perfectly normal.

Try a reset. To reset the iPhone, press and hold the home and sleep/wake buttons until you see the Apple logo (ignore the slide to power off prompt). If that doesn't work, perform a Restore via iTunes (from backup).

Layout - not recognize the element when i call the function write_form

Hi experts,
I got a layout(se71) that not recognize the element that i add in the MAIN window when i call the layout from a program.
what could it be?
i add the element in se71.
any help will be appreciated.
Michal.

Hi!
the write form that u are calling should be as below....
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
      element                  = 'ELEMENT'
      window                   = 'MAIN'
    EXCEPTIONS
      element                  = 1
      function                 = 2
      type                     = 3
      unopened                 = 4
      unstarted                = 5
      window                   = 6
      bad_pageformat_for_print = 7
     spool_error              = 8
      codepage                 = 9
      OTHERS                   = 10.
IF sy-subrc <> 0.
    MESSAGE 'MAIN window not called properly'(006) TYPE 'E'.
ENDIF.                               " IF SY-SUBRC NE 0
in the layout see if the code there with data element is proper as...
/E ELEMENT
   &var&
Also this write_form FUNCTION MODULE should be called b/w OPEN_FORM and CLOSE_FORM Function Modules.
Regards

How to keep first form window state maximize when you called the second for

HI,
how to keep first form window state maximize when you called the second form ?
Thanks

Here is sample of doing this.
Chris

In my i phone 4s when i call the display moves or shrinks like a vibrate

Similar Messages

Maybe you are looking for