In my ip 5s lte is not working please he me out from this problem

lte is not working in my iPhone 5s . Tell me some good idea for solving out from this problem

Your iPhone needs to be model A1457 and your carrier needs to be either Beeline or MegaFon, which are the Apple supported carriers for Russia. Otherwise, you iPhone may not support the LTE bands used by other carriers.
There is no way to fix this problem. You need the correct iPhone model and a supported carrier or else the service may not be available.

Similar Messages

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to lissen I had to put on loud speaker or to use handsfree please help me out with this problem if some body have answer?

My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?

Hi Venkata from NZ,
If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

My phone is not working at all. I had this problem before and I was trying to find a solution. However, at Apple Store in UK I was told to send my phone to Canada due to fact that I bought it there. What should I do and who will cover all my payments?

Hello,
My phone is not working at all. I had this problem before and I was trying to find a solution. However, at Apple Store in UK I was told to send my phone to Canada due to fact that I bought it there. What should I do and who will cover all my payments for a mail?
Thank you!

The iphone warranty is not international. It is based from the original country of purchase. You will need to ship to someone you know in the Canada to bring it to Apple for evaluation. Then that person will have to ship the phone back to you. Shipping and insurance will be at your expense. In the terms of the iphone warranty:
http://images.apple.com/legal/warranty/docs/iPhone_4_warranty.pdf
IMPORTANT RESTRICTION
Apple may restrict warranty service to the country where Apple or its Authorized Distributors
originally sold the Apple Product.

The built-in mic in g50 122ca laptop model is not working. please help me out.

the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)

here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report".

I m using macbook pro my enter key is not working suddenly how can i solve this problem?

i m using macbook pro my enter key is not working suddenly how can i solve this problem?

I have tried to delete but Com.Apple.keyboardtype.plist is missing therefore I cannot reset the keyboard
/Library/Preferences/com.apple.keyboardtype.plist

My ipod classic has started making a mewing sound and all it does is scroll through the songs. It will not play except when connected to my computer. I tried resyncing and that did not work. How do I fix this problem?

My ipod classic has started making a mewling sound and all it does is scroll through the songs. It does not play on my Bose sound dock or through earbuds. It will play when connected to the computer...but that makes it hard to take it on a walk with me I thought it might be a synching problem so tried that--still doesn't work. How do I fix this problem with out restoring it to the factory setting? I do not want to lose all my music content as some of it I cannot replace easily. Please help with suggestions and advice. Thanks. Karen in GA

Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
See this Apple support Article
http://www.apple.com/support/ipod/five_rs/classic/
You did not by chance bought the Hello Kitty special edition?
Have nice day!

Airport express setup, not working, please help me out

i recently purchased a airport express so that i can extend the range of my current network, use airtunes, and have wireless printer sharing. My base station is a d-link router, and from there i have been having a lot of problems. I have been able to set up the airport express part of the way, but not with complete functionality. I have been able to use it for music and i havent tried printing, but i cannott connect through the internet with it, i have to revert back to my base station router for that.I have tried the entire manual, scoured the mac support website and googles this problem for hours with no end. please help me out here, this is getting pretty frustrating
thanks for all the help in advance

Hello CAUTION5697. Welcome to the Apple Discussions!
Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your D-Link router can be extended wirelessly with the AirPort Express Base Station (AX).
The few that are known to work are:
o another Airport Express Base Station
o 802.11g Airport Extreme Base Station (AEBS)
o 802.11n AirPort Extreme Base Station (AEBSn)
o Linksys WRT54G or WRT54GS (not v5)
o Belkin F5D7230-4 and F5D7231
o BT Voyager 2091
o Netgear WGR614 v6
o Buffalo WGR-G54
Instead, you can configure the AX to "Join an existing wireless network" for both streaming iTunes and for sharing a USB printer. Check out the following Apple article on how: AirPort Express: How to join an existing wireless network in client mode

EVREKA !!! Contact Sheet not work in Bridge. I fix this problem (wrong setup path)

I use Win 7 64 BIT
I make pdf output in Bridge CS5 but not work.
I downloaded optional filters and I tried in to read me files path but it doesn't work.
Now I find a new path and put in the "bridge Startup Scripts" file there. They working perfectly.
The path is the bottom:
... /Program Files(x86)/Common Files/Adobe/Bridge CS5 Exkensions/Adobe Output Module/Resources/Scripts
Copy all files and folders "PSCS5OptionalPlugins_Win_en_US/Bridge Sturtup Scripts" paste in to this folder at the path
... /Program Files(x86)/Common Files/Adobe/Bridge CS5 Exkensions/Adobe Output Module/Resources/Scripts
enjoy ....

I use Win 7 64 BIT
I make pdf output in Bridge CS5 but not work.
I downloaded optional filters and I tried in to read me files path but it doesn't work.
Now I find a new path and put in the "bridge Startup Scripts" file there. They working perfectly.
The path is the bottom:
... /Program Files(x86)/Common Files/Adobe/Bridge CS5 Exkensions/Adobe Output Module/Resources/Scripts
Copy all files and folders "PSCS5OptionalPlugins_Win_en_US/Bridge Sturtup Scripts" paste in to this folder at the path
... /Program Files(x86)/Common Files/Adobe/Bridge CS5 Exkensions/Adobe Output Module/Resources/Scripts
enjoy ....

The URL bar autocomplete feature is not working correctly, does anyone else have this problem?

I was running version 9.x and had this problem, so I have just updated to Firefox 11 but this is not helping.
The issue is that the URL bar will not let me type a new address in some cases - prefering instead to refer me to a previously visited address. Perhaps it would be better if I gave an example:
I am trying to go to a site I haven't visited before, e.g. holden.com.au
I type 'h', and the URL bar suggests that I go to my Hotmail login page (the URL for this starts with 's'), and autofills the rest of the far (so now I am in the situation where I have an address in the bar starting with 's'). This means I can't continue entering the intended address.
Can this be fixed, or is it just an issue for me?

I have resolved this issue by going into about:config and toggling the browser.urlbar.autoFill setting. I think the default setting must have been changed in a recent update.

I purchased i phone 5 from usa and now it's not working please help me out

Due to the craze i have over i phone 5 i purchased it online through e bay, actually i need a cdma phone as its not avaliable in india i have ordered it online and i got it in june from then my problems started i am not able to use it, I contacted the seller but it's of no use, I contacted the sprint network people today and they said the phone is active and asked me to consult apple india so please help me sir doing me the favor,really out of my innocence i have purchased it.

There is no CDMA network in India - it does not exist and is only in the US which is what the Sprint and Verizon phones are.
If you purchased a CDMA US phone, then it is very unlikley that it will ever work in India. It definitely won't work on CDMA network as they don't exist in India - end of.
Not sure if the CDMA iPhone 5 has a sim card tray - if so, then insert an Indian sim card into it and you then should be able to use the phone with an Indian carrier. CDMA iPhone 5's should have sim card trays that are unlocked. If so, the phone should work in India, but other than that, you may be saddled with a phone that you can't use.
If you purchased it on e-bay, then it is buyer beware and go and file a claim with E-Bay for misselling and return the phone.
Other than that, this is a public user forum and Apple will not here you here.
You need to contact Apple directly.

My home sharing is not working - connection is dropping out from iMac to iOS devices

I have a 2011 iMac running Mountain Lion, and am having real problems accessing my itunes library with my iOS devices (I had the same problem with Apple TV before I bought a set of power line adapters and now running an Ethernet into it). I keep my iMac on all the time, but every day I have to quit then reopen iTunes for any chance of accessing my content on my iPhone or iPad. Otherwise Even when the 'sharing' icon is there on my devices (which it always is) it just hangs when I press it. I have had this problem for over a year, but have only just starting wanting to access my library from iPad. I am using AirPort Extreme as a base station.
Any ideas?

Powerline adapters use your home powerlines (mains a/c) to connect your devices via ethernet to your modem, they're easy to set up and the they TOTALLY fixed my ATV problem, the problem seems to be with the wireless. I've been trawling through apple discussions, and did found a workaround to my problem https://discussions.apple.com/thread/4222883?start=0&tstart=0
but its just a workaround :/

I produced a video with my iphone. The file is about 800 mb. Several times I tried to download it to my computer but this did not work! how can I solve this problem?

how can I download my video from the iphone to my computer?

When you connect your iPhone to your PC, a pop-up box should open saying something like "What would you like to do?" and click import videos and photos. If it doesn't open automatically, go to Start>Computer>Then highlight your iPhone by clicking it once>Then on the tool bar about, near the navigation buttons and search box, click Autoplay (or something like that).
Sorry if my answer isn't as sharp as it should be, I switched to Mac and I use iPhoto for everything.

I have a new iphone 4 but have a problem in that the network reads Sim not provisioned, please advise how to overcome this problem?

My new iphone has been recognised by itunes, updated the software but unable to connect to a network, on checking "Network" the phone is searching but to no avail. In "About, Network, there is a statement reading SIM not provisioned". I have no idea what this refers to perhaps someone could advise?

I've managed to speak to someone who knew what he was talking about and having confirmed the original sim on my iPhone 3 followed by confirming the number on the iPhone 4 Micro Sim he advised that the new micro sim had not been activated. As a direct result we'll head off to one of their support offices to activate and hopefully pass on the iphone 3 to another of our employees after a reset of course!

In my ip 5s lte is not working please he me out from this problem

Similar Messages

Maybe you are looking for