In my ipod 4 net signals are coming but net is not being connected what should i do????

hi!!

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:                 
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

  • I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?

    I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?

    Did you place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have 2nd gen. Ipod shuffle I restored it and now when i am trying to sync it, it is showing that some files are missing and it is not getting sync what should i do???

    I have 2nd gen. Ipod shuffle I restored it and now when i am trying to sync it, it is showing that some files are missing and it is not getting sync what should i do???

    Master reset...? Your device was jailbroken prior to you purchasing the device. The only symbol you should see on reboot is an Apple symbol. Download redsnow... google it! Download the latest version and your IPSW (ipod restore firmware) it has to be the correct version. And the "just boot tethered" should fix your device.
    But that's only if you didnt back the device up. If you don't care about any of the data on the ipod then you can simply open itunes navigate to the device and click the restore button. This will restore the ipod firmware and install a fresh copy. Good luck let me know if you have any problems.

  • I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.  What should I do

    I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
    What should I do?

    Hi Anto2211,
    Please follow the thread: Black screen CC where this issue is already discussed and resolved.
    Let me know for any further query.
    Thanks,
    Ratandeep Arora

  • I keep receiving the Security and stability update is available for my 3.6.17 version of Firefox but it will not download. What should I do?

    #
    I keep receiving the Security and stability update is available for my 3.6.17 version of Firefox but it will not download. What should I do? edit
    # Details
    BoldItalic

    There's no 3.6.18, so there appears to be a glitch in the update checking. Or the message is not really from Firefox (malware site).

  • HT4113 I have followed all directions about restarting my ipod after it has locked, but they have not worked.  What can I do to fix the Ipod?

    I have followed all directions from the website to unlock my ipod when it states Ipod is disabled, but they have not worked.  Is there anything else I can do to unlock the Ipod?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I touch an application but it will not work. What should I do?

    When I touch an app it will not go into program but just flicker. What should I do?

    Start by just rebooting your iPad. Maybe that will help. If not, post back.
    Restart the iPad by holding down on the sleep button at the top of the iPad until the red slider appears, then slide to the right to power off the iPad. Turn the iPad on again by pressing the sleep button until the Apple logo appears. Once the iPad has fully rebooted, tap any app, and see if it will launch.

  • I imported a movie from PhotoBooth to IMovie. I want to put the movie on my blog. To do that I have to select Share Media Browser, but it is not highlighted. What should I do?

    I imported a movie from PhotoBooth to IMovie. I want to put the movie on my blog. To do that I have to select Share >Media Browser, but it is not highlighted in IMovie. What should I do?

    Is the clip only in your Event Library in iMovie?
    You need to create a Project (File > New Project).
    Then move the clip into the project, do any edits and you should be able to Share your Project to Media Browser.
    Z.

  • My iphone 5 stopped working, tried replacing the lcd but that was not the problem, what should I do?

    my iphone 5 stopped working, i tried charging but wouldn't work. until the screen went all black and now it doesn't turn on. what should i do?? PLEASE help me

    Sorry. Nothing we can do to help you. Any warranty has been voided and now that you opened it yourself, Apple won't touch it. Even out of warranty.
    Try someplace like ifixit.com for advice.

  • I have a 2nd or 3rd generation iPod touch. Recently, it doesn't recognize headphones and will only play music through it's speakers. I've tried cleaning the area where you plug in the headphones but this has not helped. What should I do?

    My ipod touch (2nd or 3rd generation) won't recognize headphones anymore! I have'nt gotten it wet or dropped it. I've tried cleaning out the plug where you plug the headphones in. I've had no luck. Is this fixable or is it time to trash this iPod?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit
    It i likely not worth getting it fixed if a bad headphone jack

  • HT1657 I rented 2 movies was charged thought I down loaded but now can not find them what should I do?

    I rented 2 movies 1/30/2013 I can not watch them. Can not find them I was charged please help

    On an iPad they should be in the Videos app. If you can't find them in there then have you got a film age rating set in Settings > General > Restrictions that is hiding them, or did you start watching them and they've expired (once you start watching a rental you have 48 hours, 24 in the US, to finish watching them) ?

  • Hello,I can't open my iPhone and it's totally drain..I charged it but it's not charging..what should I do?

    HHello could you please me out what I'm gonna about my iPhone 4., it's totally drain and when charged it is not working...

    NNow looks like this...

  • My ipod touch thinks headsets are plugged in as indicated when pressing volume control.  We did a reset but that did not work.  What is next?

    My ipod touch thinks headsets are plugged in as indicated when pressing volume control.  We did a reset but that did not work.  What is next?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • The result list for activities is empty but items are coming but invisible.

    Hi ,
    The result list for activities is empty / blank - nothing shown at all. but the line items are coming but all are invisible.
    please guide me to find the root cause of this issue.
    Thanks,
    Prem.

    Hi Rene,
    When I am click on 'Search' , the view area is created but records are not being displayed. I checked in the background and data is being fetched.
    Moreover, When I am copying one line item(which is viewed blank after the search being performed but has data)  and after saving press 'previous' all the records are being displayed.
    Do you have any idea on this? Can you share your ID , I can mail you the screenshot .
    Thanks,
    Prem
    Edited by: prem kumar on Jun 7, 2010 1:17 PM

  • I bought my phone from apple store they said its sim free but now i insert the sim signal is coming but its showing on screen activation required can anyone help plz

    I bought my phone from apple store they said its sim free but now i insert the sim signal is coming but its showing on screen activation required can anyone help plz

    If your iPhone is new and you purchased from an Apple (Corporate ) Retail Store then you have to activate after inserting a new carrier sim for first time
    See here
    http://www.apple.com/support/iphone/essentials/

Maybe you are looking for

  • Can't open project anymore

    Hello, Since a while Premiere won't open my project anymore. The project loads, gets stuck at 95% or something and if I'm lucky it will open the project after all if I would wait 15 minutes. I can see that the ImporterProcessServer.exe keeps on using

  • I haveve an old ipod touch and a new one how do i transfer the stuff from the old one to the new one

    my ipod screen broke so i bought a new ipod touch and i am wondering how to transfer everything from my broken ipod on to my new one                      thank you

  • Buying a refurbished mac.

    I'm going to start with an apology if this is in the wrong place, I'm new to the forums and just finding my way about. Please feel free to shout at me or move this post to a more suitable place. Anyhow, hi there everybody, I'm a (shudder) PC user at

  • IMac as display for macbook?

    Is it possible to connect say a macbook or some other external source to the imac through vga (vga or dvi with adapters)?

  • Mail Server Transfer!

    I have Xserve running Mail Server, OD and Web which includes Mailman and webmail. I have the boot drive and another partition which has the Mail Data on it.. what is the best way to transfer the files from this machine to another Xserve running 10.6.