In my library/sharing and permissions there are two users i do not recognize. One is called fetching and one is called wheel.

If I get info on my library I see under sharing and permissions a user called fetching and a user called wheel. I am not familiar with these users. Are they there for a reason?

I see this question was asked last Oct, and had gone unanswered.
I, too, have suddently noticed that all my folders on my external disk are giving permission to this "Fetching", and my system disk show permission for "Wheel".
It is gratifying to know more than one person is seeing this, but does it mean we are both being hacked by the same source, or is there some unexplained legitimate reason they are there?
Thank you for any further information.

Similar Messages

  • I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are app installed that can not be determined. What should I do?

    I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are apps installed that can not be determined. What should I do?

    See these previous discussions:
    not determined
    iTunes cannot sync... apps not determined installed on...: Apple Support Communities
    installed apps could not be determined...: Apple Support Communities

  • When I close firefox, there are two annoying window underneath that I always have to close and they are always there again next time; how do I get rid of them for good?

    When I close Firefox, there are two underlying windows that I have to close every time. How do I get rid of them for good and prevent this from continuing to happen. Both windows were opened by me during viewing at some point, so they did originate from me.
    Thanks for any help you can give me!

    The Safe Mac
    The Safe Mac » Adware Removal Guide Genieo
    Thomas Reed's Mac Malware Guide
    AdwareMedic
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
    Mac Virus Malware Info
    MacBook Pro

  • TS3276 There are two User accounts on my iMac. The two Users have seperate email accounts.  Both email Mailboxes show up in each Account.  If I Delete Mailbox from in User account, does it delete the Mailbox from the other User account at the same time?

    There are 2 Users on my iMac.  Each User has their own email account.  Both account Mailboxes show up in each User's account.  If I delete a Mailbox in one account, does it delete the same Mailbox in the other Account? 

    If you click the - sign in Mail preferences, it will delete that mail account. If you just delete the Mailbox, that will just delete the Mailbox.
    Each user can put their own email account information in Mail when logged into their User Account.
    If you don't want the other user's mail account to show up in your mail application, then make sure the other user's messages are available to them when they are logged into their account and delete the other user account from Mail in your User Account. The other user can do the same when logged into their user account. Any messages stored in one locally will have to be transfered to the other's user account if it's not saved in their user login.
    In addition, instead of deleting the account at first, highlight the account and open the Advanced Tab and disable the account. That email account will dissappear from Mail. Once you decide that you don't want the account, you can delete it. If you need to get back to it to transfer messages, just re enable it.

  • How do i connect my keyboard when it is turned on and the batteries are new, the bluetooth does not recognize it?

    I had a connection between my macbook pro and my wireless keyboard, when the keyboard stopped working.  I replaced the batteries, and it will no longer allow me to connect the keyboard.  In fact, my macbook no longer recognizes it at all when I try to reconnect via bluetooth.

    Yes, I've had a similar problem:
    My keyboard was connecting just fine except for recently when my son would switch to his user and then I would switch back after he finished his homework in another room in the house.
    Now I've restarted and there is no longer a Bluetooth option to click in System Preferences, and as I dig deeper into the Network option, I can click the Bluetooth PAN, but if I try to "add" a BT device or select "Advanced" the button is grayed-out and the message says BT is not available.
    The keyboard power cycles fine and is available to my iMac for pairing.
    My top of the screen menu bar shows the BT symbol, but tells me it's not available.  Whaaaat???
    Utilities' System Info tells me there is "no information available" when I click the BT devices under hardware.
    Somehow it appears I've either lost the BT drivers or the module has failed.
    Any suggestions??
    TIA, Bradley

  • I purchased an audiobook and there are two parts/files to it.  I-Tunes is only finding one of the files.  How do I get it to find and consolidate the files under one book title?

    I purchased an audiobook and it has two parts/files to it.  I-Tunes only shows on file under the book title.  How do I get i-Tunes to find and associate the two files under one book title?

    Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

  • HT204406 I used Match, and now there are artists missing when I search by artist, yet they are in my library when I search by song. If they are in many song list,  why aren't they in my artist list? Also I can't sort my songs by artist on iPhone,  so thes

    I used Match, and now there are artists missing when I search by artist, yet they are in my library when I search by song. If they are in many song list,  why aren't they in my artist list? Also I can't sort my songs list by artist on iPhone,  so their music is basically lost in space....help

    It's not clear from your post, but you do realise
    that if you import a cd as a compilation, it will not
    appear under artists? This is done to save the iPod
    being cluttered up with single artists entries who
    might have only one song listed.
    I wasn't aware of that. It's true that I haven't been using the "compilation" tag for a long time. I've only started using it with iTunes 7 as otherwise with Coverflow I would have one album cover for each artist in a compilation. Before that my compilations weren't tagged as such as that is quite probably why each artist from compilations showed up when browsing by artists.
    Message was edited by: Didou

  • In my iPhoto library i have photos of web pages i don't know how they got there there are hundreds of them ,how do i get rid of them and stop them please help me

    in my iPhoto library i have photos of web pages i don't know how they got there there are hundreds of them ,how do i get rid of them and stop them please help me as i have no idea many thanks

    im sorry to be a bit thick here i didnt know this was happening until i looked through all my photoes i use an sd card to put pictures on lap top and icloud from my phone but in library there are all web pages i have ever been to ie face book ebay etc i didnt know if there was any thing i should be turning off many thanks for ur last answer though

  • There are three users on one laptop and I keep wiping out there libraries.  How do I create a seperate Itunes

    Not sure what im doing but here goes.  There are two of us using itunes on the same lap top with different devices. How do I create a seperate account for me and my device.

    The best way is to have each library in a separate Windows User ID.

  • HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how

    Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

    nope all my songs are copied and organized into the iTunes library.

  • I just downloaded itunes, and when i go to music there are two options. You can either go to the itunes store or scan for media, and when I click on scan for media it does nothing. Help?

    I just downloaded itunes, and when i go to music there are two options. You can either go to the itunes store or scan for media, and when I click on scan for media it does nothing. Help? (I tried deleting itunes and re-installing it but apparently itunes was still on my computer so it asked me if I wanted to just check and see if there were any issues or missing software, so I did that but i still had the same problem.)

    Hi jbserious,
    Welcome to the Support Communities!
    It doesn't sound like the iTunes software and its components installed completely.  The article below will walk you through some troubleshooting steps.  Is this your first time using iTunes, or do you have an iTunes library from another computer that you want to move to this one?
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    Adding music and other content to iTunes
    http://support.apple.com/kb/HT1473
    Cheers,
    - Judy

  • HT4993 on my computer there are two different accounts for the itunes store but my brothers account keeps syncing in on my iphone instead of my own account how do i get his account off of my phone and add my own back?

    on my computer there are two different accounts for the itunes store but my brothers account keeps syncing in on my iphone instead of my own account how do i get his account off of my phone and add my own back?

    Not a good idead to share IDs
    Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    Read Sharing an Apple ID with your Family
    Does your father have a recent backup of his phone?  If so restore his phone from that.  Please not that everythign created on th ephone since the backup was made will be lost

  • Every time I open iPhoto a window opens telling me that there are 3 photos that have not been imported. Recovered folders are opened with no photos and I cannot find which photos have not been imported. Help please!

    Every time I open iPhoto a window opens telling me that there are 3 photos that have not been imported. This happens twice. When I answer yes then nothing happens and if I answer no then a recovered folder is opened with no photos in it. These recoverable folders keep opening with no photos in them. I cannot find which photos have not been imported. Can anyone assist please?

    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

  • Does the Airport Extreme support HP cp1025?  There are two versions of the printer the cp1025 and cp1025nw.  I have the cp1025, and can't set it up. Is there a list of AE/bonjour supported printers?

    Does the Airport Extreme support HP cp1025?  There are two versions of the printer the cp1025 and cp1025nw.  I have the cp1025, and can't set it up.
    Is there a list of AE/bonjour supported printers?

    Bonjour is a transport protocol. It also provides a means of advertising a printer on a network.
    Any list that shows printers that support Bonjour is generally an indication that the printer itself supports this protocol, meaning that when it is connected to the network, you can see it in your default Add Printer browser. In the case of the Airport, it also supports the Bonjour protocol and will advertise any printer that is connected to its USB port. The printer itself does not have to support Bonjour. The Airport performs this function. And like many lists, they are not kept up to date because each vendor releases several new models every quarter or half year.
    There are definitely printers that don't work when connected to the USB port of the Airport. And this is more that the printer driver does not support this type of connection, mainly due to the port not supporting bidirectional communications which some printer drivers require. The Canon UFR2 and CAPT drivers are a good example of this limitation. But this is only the Mac drivers. The Windows equivalent drivers work fine when the printer is connected to the USB port.
    So with you having an issue with the Windows drivers then I don't think it is a case of them not supporting Bonjour but more to do with some other component not functioning when the printer is shared by the Airport. The error message appears to have more to do with local user rights which is probably driver related. I've seen some printers that you cannot use the Windows Add Printer wizard to add them. Instead you have to use the vendors utility because of some proprietary protocol being used. Maybe this is one of those?
    Now that you seen how it should work based on when you used the C3188, if you still get that error message at point 6 of adding the C1025 then it would suggest a driver compatibility issue with the Airport - which is not necessarily a Bonjour compatibility issue. So unless there was another model of HP printer driver that you could use to this C1025 and that was also compatible with the USB port of the Airport Extreme, then I would suggest your best action is to replace the printer with a model that does work. Maybe even one that has builtin wireless so you don't have to use the USB port of the Airport.

  • There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report

    When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
    - When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed.  The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
    Requirements:
    There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
    ->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
      server to SAP R/3. The selection screen parameters would be:
      Logical Filename:
      Sales Organization:
      Distribution Channel:
      Division:
    ->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
      to SAP R/3. When this transaction is executed, it should not have the 'Logical
      Filename' parameter anymore on the selection-screen. Instead it should only have
      Local File name on the presentation server:
      Sales Organization:
      Distribution Channel:
      Division:
        The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
    is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
    Logical Filename:
    Sales Organization:
    Distribution Channel:
    Division:
    So how should I make these parameters invisible depending on the transaction codes execution.
    I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
    I have an idea of using SY-TCODE.
    EX:
    AT SELECTION-SCREEN OUTPUT.
    IF SY-TCODE = 'ZJPVCS303'.
    LOOP AT SCREEN.
    IF SCREEN-GROUPID = 'GRP'.
       SCREEN-INPUT   = 0.
       SCREEN-INVISIBLE = 1.
       MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ELSEIF SY-TCODE = 'ZJPVCS303_US'.
    LOOP AT SCREEN.
    IF .....
    ENDLOOP.
    ENDIF.
    ENDIF.
    But I am not able to get the output which I require. Please help me out.

    Hello Rani
    Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
    PARAMETERS:
      p_as_fil          TYPE filename   MODIF ID unx,  " e.g. Unix server
      p_pc_fil          TYPE filename   MODIF ID wnd.  " e.g. Windows PC
    AT SELECTION-SCREEN OUTPUT.
      CASE syst-tcode.
    *   transaction(s) for upload from server (AS)
        WHEN 'ZJPVCS303.
          LOOP AT screen.
            IF ( screen-group1 = 'UNX' ).
              screen-input = 0.
              screen-invisible = 1.
              MODIFY screen.
            ENDIF.
          ENDLOOP.
    *   transaction(s) for upload from local PC (PC)
        WHEN 'ZJPVCS303_US.
          LOOP AT screen.
            IF ( screen-group1 = 'WND' ).
              screen-input = 0.
              screen-invisible = 1.
              MODIFY screen.
            ENDIF.
          ENDLOOP.
       WHEN others.
       ENDCASE.
    Regards
      Uwe

Maybe you are looking for