IN MY SETTING PROFILE SHOWN MFLHomeDis and TapGen InHouse.. i don jilbreak my phone, so actually what is it
helppp
Well if you type the name in it shows up tapgen.com and on that you can see feature points the app or whatever so if you downloaded it that could be the possibility that that shows up. it shows up on mine too.
Similar Messages
-
When I try to connect my iPod Nano 4th gen to my laptop I get a message that my device may be corrupted and asks do I want to format the disc. However, I have hundreds of songs and photos that I don't want to lose. What can I do?
This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock -
i upgrade my iphone 4s to ios6, i did not provide my Apple id, in updating iMessage and facetime, will it affect the my phone, if yes, what should i do
thanks razmee
-
I recently reset my phone and I have been asked to activate my iphone but I don't know either my email or password and I cannot get on to my phone any ideas what I can do?
Hi Meganmay22,
Welcome to the Apple Support Communities!
It sounds like the iPhone is in a status called Activation Lock. Please use the following article for information on Activation Lock; it includes information on locating your Apple ID.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Have a great day,
Joe -
I just updated my phone with i tunes and when it was done my contacts were gone what should do?
Contacts are not a part of backup. Only favourites and recent calls list is backed up.
Contacts are synced with a compatible programme on your computer (Outlook, Windows Contacts, Address Book etc) or with a cloud service (iCloud, Yahoo, Google). Sync back your contacts from whichever programme you were using.
If you have not been syncing/backing up your contacts with any of the programme, then they are gone. -
Yesterday my little cousin was playing in the table and he kicked the table leg and made the iphone fall in to the ground. I bought this iphone unlocked on July 2012 and it has Repairs and service coverage active until july 16 of 2013. Last year a friend of mine went to an app store and changed his broken screen iphone 4 for a 4s, ofcourse he had to put some money to make it happen.
Now I am wondering how much it will cost me to change the screen of mine, or if it worth it to change for a new 4s or a 5.
Also I am out of the states until Feb 22 and in this country there is a bad reception on the phone calls so its complicated talking to apple support.
NEED HELP!!!!
Thanks MatIt will be replaced with the exact same model. It is not expensive compared to the full retail price of a new phone (without carrier subsidies).
If you're eligible for an upgrade from your carrier, now might be a good time to consider upgrading to an iPhone 5, though. -
it gives me an error msg everytime i go to authorize or deauthorize my computer. It says its gonna delete my apps every time i click sync and it wont transfer my music to my iphone... what do i do..
it gives me an error msg everytime i go to authorize or deauthorize my computer.
What does the error message say? (Precise text, please.) -
My iPhone 4 failed when updating to ios 7 and now says I don't have enough room. What do I do?
I deleted all my apps to make room for the update, but it failed and now it says I don't have enough storage space. What can I do?
Update using iTunes on your computer.
-
Hi Experts,
I cannot send attachment beyond 1.5 MB, the MaxFileSize parameter is already set to 6 MB and the exchange server's limit is
10 MB.
What could be the issue?
aaBut I am able to send the same attachment from my web browser
aa
I am not expert in Exchange but web browser may not be using SMTP protocol? Check with your SMTP/Exchange Admin about "4.3.1 Message size exceeds fixed maximum message size"
4.3.1 is response from the server.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
Touch screen on Iphone slowly, over a few days stopped responding. Went to Genius Bar and was given a new 3GS because they didn't know how to fix the issue. Cool. Went home synced with Macbook Pro (new-12/2010), two days later same issue. This time when I went to Genius Bar they restored the phone to factory settings and instructed me to load as a new phone in Itunes instead of restoring information of the previous phone, which is an option good for when your replacing phone not fixing one Anywho, did everything they told me to do. SAME ISSUE A FEW DAYS LATER. This time I was told the software issue is with my Macbook and I thought this made sense, so I took it in along with the phone. That was yesterday. Phone working intermittently since leaving Apple. I was given instructions that if their "daily" fix didn't work to erase hard-drive and reinstall software that came with the macbook and start fresh. This would definately fix the issue. Extreme yes, but I need use of my phone, especially since we got rid of the house phone and all use cell phones. So last night I did the required erase of hard-drive and re-loaded all software that came with it and Microsoft Office for Mac. Plugged in the phone to set up in itunes and thought that was it. My phone is still not working. Can't answer when I try, can't make calls, etc. What the heck do I do? I'm starting to feel like a major lamo having to keep going back to Genius Bar, but I know enough to know these issues should have been resolved with the steps I've taken. I even went as far as to restore through my husbands computer and same thing. Could there be a problem with Itunes? Could the magnetic stripe in my debit card be hurting the device somehow, although that's a long shot since I have had the same or similar case since getting the phone. Frustrated beyond belief. Apple support not open at this hour so I'm trying my luck here.....
Thanks for any input.restore iPhone as new and start again
-
How to set up Print Specs and Profiles in CS5 Suite
I am no color management expert but I do want to get my printer to print the same colors as my monitor displays in PSD, AI and InD applications.
My Intel iMac and Cinema Display running OS10.5.8 are both color calibrated with Spyder 3 Elite to achieve correct color reproduction.
After days of searching and testing, this is my solution which I offer to help those new to CS5.
1. Start: PHOTOSHOP:
Set colour settings (Edit>Color Settings) as follows:
RGB - Adobe RGB 1998
CMYK - US Web Coated (SWOP) v2 (This setting does not effect printer).
Leave Grey and Spot as default 20%
Color Management Policys:
RGB, CMYK, Gray; all set to Preserve embedded Profiles
Conversions Options:
Engine - Adobe ACE
Intent - Relative colourimetric ( my choice for AI artwork. Choose Perceptual for photos in PSD).
Go to Save, give profile a name, and note the Conversion intent so you can create another profile for Perceptual and PSD.
(I called mine Epson R2400 and noted the Relative Colorimetric intent).
Finally, Go to Settings at the top of the Color Settings dialogue and select the color profile you have just named and saved. Click OK
2. Go to Bridge>Edit>Creative Suite Color Settings. Find your saved profile and select it and click Apply.
Now AI and ID have the same colour preferences.
Users without Bridge will have to set these items in Color Settings for each Adobe application.
3. Photoshop>File>Print: Color Management
Color Handling - Photoshop Manages Color
Printer Profile - Choose the ICC Profile to suite your printer and paper stock. I used Epson canned ICC SPR2400 Premium Glossy with great results.
Rendering Intent - Relative Colorimetric for artwork or Perceptual for photos.
4. At top of Print dialogue box, select Printer (Epson Stylus Photo 2400 in my case).
Below, Click and open Print Settings;
Layout - select Paper Size and number of pages (copies). Layout is one of several items in a drop down menu.
Open the next drop down item, Color Matching. Check that he two options, Color Sync and Epson should be grayed out.
Move to Print Settings.
Media Type - depends on your paper. (mine is Photo Quality InkJet).
Color - select Color or Black
Color Settings - OFF, This turns off color management in Epson Driver leaving Photoshop in charge!
Mode - I chose Advanced to get fine quality print. Automatic OK for general use.
Click Save. Click Print and you should get a print matching your Monitor.
ILLUSTRATOR CS5
Bridge will ensure that Color Settings match Photoshop as 1. above. If you don’t have Bridge Go to Edit>Color Settings and specify the same as Photoshop. Note Settings, at top of Color settings dialogue box requires the profile you created in Photoshop.
Go to File >Print. There are 3 steps to check.
In the window at left are headings General, Marks and Bleed, Output, Graphics, Color Management, Advanced and Summary.
These are self explanatory. If you do not use Bridge, check Color Management as below:
1. Printer: your printer. Color Handling: Let Illustrator determine colors. Printer Profile: select your monitor RGB icc profile.
Unlike Photoshop, do NOT use printer/paper ICC. Rendering intent: to suit your image.
2. Bottom left of Print dialogue box is Page Setup. Set your size etc.
3. Bottom Left is Printer. MOST IMPORTANT. Here are the similar setting options as PSD 4 above which require different handling.
Select Layout, go down to Color Matching>select COLORSYNC not Epson. This ensures Apple ColorSync does color conversion.
Profile - Automatic should appear with name of your preferred Printer/paper ICC below. ( be careful here as I have found AI sometimes finds the wrong paper icc. Close Print and start again).
Move down list to Print Settings - Basic:
Page Set up - Standard; Media type - Your choice, (Photo Quality InkJet for me).
Color - Color
Color Settings OFF to ensure Epson printer driver does not try to manage color.
Mode - Advanced if you want fine quality print. Automatic is OK for general use.
4. Click Print to close Printer dialogue box. Click Print to close the Print dialogue box and you should get a print to match your on screen image.
INDESIGN and General Comments.
Always select your Printer first as settings vary according to printer type.
InDesign Print set up is very similar to AI. Select Color Management at left and the Printer, Printer Profile and Rendering Intent require identical settings.
Go to bottom left, Page Setup. Specify Printer and paper size. Select Printer and the settings required are the same as AI.
If you switch between these apps there is considerable danger that the different Profile choices will trip you up. Photoshop color management requires the Printer/paper ICC, AI and InDesign require Monitor ICC. My primary error was to select my professionally scanned printer/paper ICC profile which resulted in weird colours on AI and ID. The clue that led me to choose my Monitor ICC profile instead was the ColorSync option in Color matching in AI. I hope you will find printing runs a lot smoother for you and I heartily invite better informed users than I, can add to, or qualify this post.
May the Force be with you!Regarding print brightness at output. The Settings of monitor calibration determine white point and black point. At the time you run Spyder 3 or whatever your monitor calibrator is, the software sets a white point of your choosing. current iMacs are far too bright and prints resulting from unmodified Mac monitors will appear too dark because of the excessive screen brightness. My iMac at lowest reading is 139 candelas. To get prints which match the screen I specify 80 candelas. The Spyder software also reads ambient light in the room and makes a calculation which effects the white and black points registered for both viewing and printing. Since paper reflects a light level according to lighting conditions, we each view prints in different conditions according to illumination source. This effects also effects screen viewing so conditions determine what we see.
In simple terms, ambient light reading also modifies the software calculations for colour output. If it is too high, prints are pale, too low and prints are too dark. If the Monitor calibration has been done properly there should be no problem. The point here is to make certain your calibration process is accurate. Personally I have calibrated in a dark room at night-time and I have calibrated In a shaded room at midday. Hugely different conditions. Under both circumstances I have found the calibration has resulted in good prints. So I suspect it is user white point settings or calibration error which results in prints being too dark or too light. I understand the data used by the calibration software applies to the ambient light reading to the monitor for reading conditions and uses other color gamut data for the printing process. So printing error must surely originate with the user.
I welcome comment from more experienced people in this matter.
Cheers, -
I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.
Post in the iMovie forum.
-
I have an iPhone 5s and i've been noticing that my phone would go into Do Not Disturb mode at night. So I looked under settings, and there was a profile labeled "Consumer Input" and then I noticed DND was set for 10pm-7am. Does anyone know what caused it?
You downloaded a profile from somewhere. If it's not one you want or need, delete it.
-
After two days of not being able to open Firefox, I found an article on this website which suggested that I create a new profile. I followed the instructions (which never stated that I should first backup Firefox or my old profile) After creating the new profile, Firefox is once again working fine but, I am unable to access important data such as bookmarks and history.
I have followed several suggestion on this website but, I am still unable to find my old profile content.As long as you did not uninstall Firefox and remove personal data, your old profile still should be in the same location. Depending on how messed up it was, here are two options:
'''(1) Use the profile manager to start Firefox up in your old profile and create a fresh bookmarks backup.''' If it didn't run, this won't be useful.
To start in a different profile, Exit out of Firefox and start it up from the Start menu, search box, using
firefox.exe -P
Your old profile may have a name like default.
Then you can create a fresh backup or export of your bookmarks (or both) to a neutral location (e.g., the Documents folder). These articles have the steps for creating these files:
* [[Restore bookmarks from backup or move them to another computer]]
* [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]] (note: does not preserve tags you have assigned to bookmarks, if any)
Exit Firefox, use the profile manager to return to your new profile, then you can either restore the bookmark backup or import the HTML file. The difference is that a restore completely replaces whatever exists now, while an import adds to what you have now.
* [[Restore bookmarks from backup or move them to another computer]]
* [[Import Bookmarks from an HTML file]]
Success?
'''(2) Restore an old bookmark backup.''' Firefox creates these files regularly, but it might not be perfectly complete.
To access the old files, I suggest starting from your current (new) profile folder. You can open that from within Firefox using either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This should launch a new window showing your ''current'' settings files. Using the address bar of that window, click up to the Profiles folder level and then double-click into your old profile folder, then into its bookmarkbackups folder. Copy the latest backup file to a neutral location (such as your Documents folder).
Back in Firefox, try to restore the older backup. Note: this will completely replace your bookmarks in this profile, so if you have saved new bookmarks you want to save, please perform the optional steps in the following list:
* Optional (preserve new bookmarks): [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
* [[Restore bookmarks from backup or move them to another computer]] - use Choose File to go to your Documents folder to get the old backup
* Optional (add new bookmarks to the restored set): [[Import Bookmarks from an HTML file]]
Success? -
How to set the page size and the margins programatically
Hello,
I am working with crystal report XI Release2 and asp.net.
One of my report is having 4 graphs in a single report.In order to display all the graphs in one page i have set the paper size as A3.(Via Crysta report ->File->Page set up)
But the page size A3 is not provided by all printers.So problem comes when the application is diployed on a machine which does not support A3 Printer.All the graphs will not be shown on a single page.
Also Each and Every time ,when the application is diployed on a machine,user has to open the crystal report and adjust the page size accordingly to get all the reports on a single page.
This is a kind of usability issue also.
Is it possible to set the page size and the margins programatically say for eg 11 X 17.so that with out doing anything all the 4 graphs will get displayed on a single page ?
Please let me know if you require more information regarding this issue.
Thanks in advance.
smitha.Hi Ludek,
i could solve the issue by using the follwing code.
report = new ReportDocument();
PageMargins customPageMargin = report.PrintOptions.PageMargins;
report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
report.PrintOptions.PaperSize = PaperSize.Paper10x14;
customPageMargin.rightMargin = 1;
customPageMargin.topMargin = 0;
customPageMargin.bottomMargin = 0;
report.PrintOptions.ApplyPageMargins(customPageMargin);
Thanks for you help.
Regards,
smitha.
Maybe you are looking for
-
When I visit some webpages - example www.thephonebook.bt.com - I cannot read the pages because they are grey and the info fades into the page and is unreadable. Can I change the colour of website pages or is there something else I can do or undo?
-
How to open sdf files in SQL server 2012?
How to open sdf files in SQL server 2012? I couldn't figure out how to open the sdf files in SQL server 2012 Thank you Best Jamal
-
How to search text in pdf file?
Hi all I have to store the cover of a newspaper that include images and text and then should be able to search keywords in the cover. I've read about to store in pdf format and use intermedia text. I am just wondering the way to store and to do the s
-
How can I reduce the size of a picture in iPhoto so it is small enough to post on the web.???
How can I reduce the size ( Pixels) of a picture in Iphoto so I can post it on the web???
-
How to assign 5 queries into role?
hi experts, I have created 5 queries. i have created a role based on one role(its copied), what ever the queries are asigned to that role has come into my new role which i have created.i want to delete those queries and i want to assign my 5 new quer