In my work flow Invoice Details not geting when Dispute case created?

Hai Experts,
Im Working on Dispute case Workflow in FSCM module , I Created custom workflow for that ,
when ever Disputecase created notification send to Processor and Coordinator for that i created one Zclass
write the one of the that Zclass method for sending the mail to processor and coordinator for those mail Id's,
Its working fine but the problem is on that mail i have to send the Invoice details also ,
for that im using the fm 'UDM_GET_BOR_OBJECT_KEY_INVOICE ' this FM not geting the data when dispute case is created,
its working in foreground and background, but the problem is in workflow it is not geting the invoice details.
please help me on this,,,
thanks in adv..

Hello,
"I Debug the FM, its throughs the Error
'No Configuration for the wrokflow Wfno version 0000'."
I doubt very much that the FM is showing that error. I assume you mean the workflow log.
The step that calls the task that calls the method that calls that FM, is that the one with that error message?
First check that the FM works in SE37 with the same inputs as when called from the workflow, and if it gives the expected output.
Try replacing that step with a different one to make sure there's no problem with the workflow itself. Make sure the workflow is activated without errors and do SWU_OBUF.
regards
Rick Bakker
hanabi technology

Similar Messages

Work flow mails are not coming to inbox but coming to out box in quality

Hello,
We are working on the implementation of Work flow for Purchase orders.
Work flow customization is completed and even work flow is triggering when ever I create Purchase Order.
Even Agent assignment also completed for work flow tasks via T code PTFC_CHG.
This work flow is working fine in development.
When I moved this workflow to quality I got a problem.
Problem here is Work flow mails are not processing out of SAP Outbox to approvers inbox even also after executing the program RSWUWFML2.
When I triggered the PO in development the work item is moved to SAP out box as well as inbox. In quality It is not coming to SAP inbox.
If I check in SOST,I will not see any of the entries related to work flow mails.
Only above I can see in my SAP Outbox.
So how can I Process these messages to approvers SAP Inbox.
Any body please help me where the problem is
With regards,
Sudhakar

Hi SP,
I may be wrong, but on reading ur thread, I feel u r mis interpreting SAP Outbox with Outlook.
Is it so, because u have mentioned about RSWUWFML2 and SOST, which comes into picture only if u r using an external mail like Outlook.
If its Outlook, then there is no doubt that ur work item would get deleted from SAP Inbox and would be present only in Outlook.
If its SAP Outbox, then u r not supposed to get ur work item in ur Outbox unless it is processed or executed thru ur SAP Inbox.
Hope it helps.
Aditya
Edited by: Aditya Varrier on May 23, 2008 1:52 PM

Why has my landscape orientation feature quit working. Images do not rotate when device is rotated., why has my landscape orientation feature quit working. Display does not rotate when device is rotated.

why has my landscape orientation feature quit working. Display does not rotate when device is rotated.

Is orientation lock on?
iPhone User Guide (For iOS 6 Software)

Work flow - user is not reciving mail,once CREDIT MEMO submits for approval

Hi All,
Please find the issue as below.
User created the credit memo and submitted for approval. user is expecting the mail in his mail-box, once he submitted the credit memo for approval and same way once approver approved the credit memo, user is expecting mail such that credit memo has been approved.
He informed that previously he is receiving the mails as expected.
Now all of sudden he is not receiving mails.
I have checked work flow mailer, mailer is up and running.
I have gone through the wf_notifications table, here i can see that MAIL_STATUS column having value of "MAIL".
even i have gone through WF_USERS table this particular user is existing and status is "ACTIVE".
But user is not yet received any mail.
Kindly some one help me to sort out this issue.
Thanks in Advance.
Edited by: user627525 on Jun 8, 2011 5:58 AM

Thanks RK for your quick reply.
I was gone through the details you have provided. every thing is fine as expected.
Later i have checked workflow mailer, it was down, due to that notifications are not reached to users/customers.once it is up and running mail notifications sent to respective users successfully.
Many Thanks.

Work flow task id not found in UWL config XML file

Hi
We are facing a strange issue with UWL XML file.
We are running EP 7.0 SP13
We configured UWL and we are able to see the work items in UML iview. These are the same work items as seen in SAP Inbox.
But when we open the uwl.webflow.<system alias> XML file corresponding to the back end system, We were not able to see the task id of the work flow item displayed in the UWL.
Any help on this would be highly appreciated.
Thanks and Regards
VNK

Hi VNK
I am facing the same issue - Please let me know if you have found a solution.
Regards
John

Work flow status is not changing

Hi,
The work flow is not ending. The last approver is getting the item in his inbox repeatedly though he has approved it previously and the workflow status is showing as still in progress.
Please kindly help me to solve this
Regards,
Sekhar.

Hi Chandrashekar,
When we create w work item in the workflow, we specify the thing we want to perform in it.When the task is perform we need to set the event for the end task.Event can be repoting higher autority , a mail or something.After we set a task or work process we need to handle the end manuallly.It never gets terminated itself but we have to terminate it manually.Even if you are sending the approval from the user after task completion and you must have ended the procedure.Now as the last task is not handeled properly.That is executing in endless loop.So you may go for termination of workprocess after the last mail.If you have used loop untill please use container with it.It will be helpfule.Hope your query resolves soon.
Have a best day ahead.

About Work flows in detail

Dear Friedns,
Can anyone please tell me the Step by Step procedure of Creatinga New Work Flow.
I know the concepts about Work flow and T-codes
But I want to know what is to be done after what and why?
Because it is very much confusing for me.
Points will be rewarded without any doubt.
Thanks in Advance,
Satya.

Hello satya,
Work flow creation.
Check it out.
All the Best!!!
Manoj.

"Recovery partition not found" when trying to creat recovery discs.

I received the following error message when trying to create recovery discs for the first time "recovery partition not found" HP G61 401SA Notebook and it is a couple of years old and has windows 7 as th OS.
I specifically purchased DVD-R discs for the disc creation, which was advised from HP site was the only disc suitable.
Am I doing something incorrect or is there an issue?
Is this why I am unable to also create a back up - are the two things related?

GustoRMC wrote:
Hi Erico
I have managed to create the snip - but unsure how to incorprate into the reply here as copy paste will not work - how can I do that?#
The dvd - r are Verbatim Wide Inkjet I have had success with the Verbatim DVD+R
I did not know you are volunteer helpers - thanks goodness for people like you as trying to contact HP support for help was impossible and seemed like I kept going around in circles. No worries. We are here to help.
One more thing, could you advise on how much space the recovery might be approximately - I will need to make sure a USB has enough memory available. Take another look at the disk management window. The partition sizes are visible in the descriptions. My HP loaner has a large recovery partition at >20GB. That mean I had to use a 32GB usb flash drive Most others are smaller and a 16GB usb flash drive will suffice.
Regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Local logical system is not defined when tried to create new maint. trx.

Dear Experts,
I encountered this message "Local logical system is not defined" when I tried to create new maintenance transaction in DWSP (at Maintenance Optimizer of Solution Manager).
This message kept on appeared even though I've created and assigned the logical system at SALE.
Does anyone know what went wrong?
regards,
Abraham

Hi
there are workarround suggested to solve this problem
login to your solman system, go to the table T000 and update the logical system name in the field LOGSYS
this vanish the error message.Please try.
Thanks,
Jansi

Workflows not triggered when documents are created in Doc Set via Content Organizer

The following is my scenario:
A document set (containing several documents) is created in Library A on Site A
Using Send To, the Document Set is sent to the Drop Off Library on Site B (a different Site Collection)
A Content Organizer rule then moves the Document Set and its documents to destination Library B
In Library B I have defined a workflow (using Visual Studio 2012) that is triggered when new item is create
When the Document Set arrives in Library B from the Drop Off library (i.e. when the Content Organizer moves the Doc Set to Library B), the workflow is triggered (and executes) on the Document Set, but it is NOT triggered on the documents within the Document
Set. How can I get the workflow to trigger on the documents within the set when they are created via the Content Organizer rule?
The interesting thing is that if I manually add another document to the Document Set in Library B, the workflow is triggered on that document. It just does not trigger when the documents are created via the Content Organizer.

Hi,
In edit Content Organizer rule page, I see there is an option as Automatically create a folder for each unique value of a property:
However, unlike the drop down used in the property based filters above, this drop down *only* contains properties that are required by your content type.
This is done to prevent adding folders that have no values for a property.
If you need to put similar documents to the same folder, you could consider making use of this feature.
Regards,
Rebecca Tu
TechNet Community Support

Tax details not geting populated

Hi Folks,
I have a problem in populating tax details.can anyone here please let me know where I am going wrong in the code.The last butone field is caluculation and can be ignored for the time being.
REPORT ZMMEXCISETEST                           .
*Tables.
TABLES : ekbe,
         rbkp,
         rseg,
         bkpf,
         bset,
         lfa1,
         makt.
*Declaration for ALV.
TYPE-POOLS: slis.
DATA : itfieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA : itrepid TYPE sy-repid.
itrepid = sy-repid.
DATA : itevent TYPE slis_t_event.
DATA : itlistheader TYPE slis_t_listheader.
DATA : walistheader LIKE LINE OF itlistheader.
DATA : itlayout TYPE slis_layout_alv.
DATA : top TYPE slis_formname.
DATA : itsort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
DATA : itsort1 TYPE slis_sortinfo_alv.
DATA : itprintparams TYPE slis_print_alv.
DATA : itvariant TYPE disvariant.
DATA : date1 LIKE rbkp-budat,
       date2 LIKE rbkp-budat,
       string1(65) TYPE c,
       title(65) TYPE c.
DATA:L_BELNR1 TYPE BKPF-BELNR,
     L_AWKEY1 TYPE BKPF-AWKEY.
*Internal table Declarations.
TYPES: BEGIN OF ty_itfinal,
          sl_no   TYPE sy-tabix,     " FOR SERIAL No.
          belnr   TYPE rbkp-belnr,   " Material Doc. No.
          budat   TYPE rbkp-budat,   " Posting Date in the Document
          lifnr   TYPE rbkp-lifnr,   " Vendor Code
          xblnr   TYPE rbkp-xblnr,   " Supplier Document Number
          bldat   TYPE rbkp-bldat,   " Document Date
          kursf   TYPE rbkp-kursf,   "
          buzei   TYPE rseg-buzei,   " miro line item
          ebeln   TYPE rseg-ebeln,   " po no
          ebelp   TYPE rseg-ebelp,   " PO line item
          matnr   TYPE rseg-matnr,   " part no
          bwtar   TYPE rseg-bwtar,   " valuation type
          menge   TYPE rseg-menge,   " quantity
          wrbtr   TYPE rseg-wrbtr,   " value of goods
          lfbnr   TYPE rseg-lfbnr,   "
          wrbtr_r TYPE rseg-wrbtr,   " Rate
          wrbtr_v TYPE rseg-wrbtr,   " Value of Goods
          bewtp   TYPE ekbe-bewtp,   " PO history category
          budat1 TYPE ekbe-budat,   "
          hwste_c TYPE bset-hwste,   " ED/CVD(Tax Amount in Local Currency)
          hwste_e TYPE bset-hwste,   " E.Cess(Tax Amount in Local Currency)
          hwste_s TYPE bset-hwste,   " Snhe.Cess(Tax Amount in Local Currency)
          accno   TYPE bkpf-belnr,   "
          BELNR1 TYPE BKPF-BELNR,
          AWKEY   TYPE BKPF-AWKEY,
          name1   TYPE lfa1-name1,   " vendor name
          maktx   TYPE makt-maktx,   " Material Description
      END OF ty_itfinal.
DATA: itfinal TYPE ty_itfinal OCCURS 0 WITH HEADER LINE.
TYPES : BEGIN OF ty_itab1,
          belnr   LIKE rbkp-belnr,    " Material Doc. No.
          budat   LIKE rbkp-budat,    " Posting Date in the Document
          lifnr   LIKE rbkp-lifnr,    " Vendor Code
          xblnr   LIKE rbkp-xblnr,    " Supplier Document Number
          bldat   LIKE rbkp-bldat,    " Document Date
          kursf   LIKE rbkp-kursf,    " Ex.Rate
       END OF ty_itab1.
DATA :itab1 TYPE ty_itab1 OCCURS 0 WITH HEADER LINE.
*Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
PARAMETERS:     p_bukrs LIKE rbkp-bukrs OBLIGATORY.
PARAMETERS:     p_werks like rseg-werks OBLIGATORY.
SELECT-OPTIONS: s_budat FOR rbkp-budat OBLIGATORY.
PARAMETERS    : p_gjahr LIKE rseg-gjahr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK block1.
date1 = s_budat-low.
date2 = s_budat-high.
PERFORM getdata.
PERFORM alv.
*&      Form GETDATA
      text
--> p1        text
<-- p2        text
FORM getdata .
*Invoice Header
SELECT belnr
         budat
         lifnr
         xblnr
         bldat
         kursf
         FROM rbkp
         INTO TABLE itab1
         WHERE gjahr = p_gjahr.
IF sy-subrc NE 0.
    MESSAGE 'No Values.' TYPE 'S'.
ELSE.
    LOOP AT itab1.
      IF itab1-budat NOT IN s_budat.
        DELETE itab1.
      ENDIF.
    ENDLOOP.
ENDIF.
*Invoice Item.
LOOP AT itab1.
    MOVE-CORRESPONDING itab1 TO itfinal.
    SELECT buzei
           matnr
           bwtar
           menge
           wrbtr
           lfbnr
           XBLNR
           FROM rseg INTO CORRESPONDING FIELDS OF itfinal
           WHERE belnr = ITAB1-belnr.
    ENDSELECT.
    IF itfinal-lfbnr IS INITIAL.
      SELECT belnr
             budat
             FROM ekbe INTO (itfinal-lfbnr, itfinal-budat1)
             WHERE belnr = itab1-belnr.
      ENDSELECT.
    ENDIF.
*P.O. History
    SELECT ebeln
           ebelp
           bewtp
           FROM ekbe
           INTO CORRESPONDING FIELDS OF itfinal
           WHERE belnr = itab1-belnr.
    ENDSELECT.
*<b>Accounting Doc.No.
    SELECT BELNR
           AWKEY
           FROM bkpf INTO (ITFINAL-BELNR1,itfinal-aWKEY)
           WHERE blart = 'RE' AND
                 GJAHR = P_GJAHR AND
                 BUKRS = P_BUKRS AND
                 BUDAT IN S_BUDAT.</b>
*Vendor Details.
    SELECT name1
           FROM lfa1 INTO (itfinal-name1)
           WHERE lifnr = itfinal-lifnr.
    ENDSELECT.
*Material Description.
    SELECT maktx
           FROM makt INTO (itfinal-maktx)
           WHERE matnr = itfinal-matnr.
    ENDSELECT.
    ENDSELECT.
APPEND ITFINAL.
ENDLOOP.
<b>LOOP AT ITFINAL.
*Excise Duty and Ed.Cess.
    SELECT HWSTE
           FROM BSET INTO (ITFINAL-HWSTE_C)
           WHERE BELNR = ITFINAL-BELNR1 AND
                 GJAHR = P_GJAHR AND
                 BUKRS = P_BUKRS AND
                 KSCHL = 'JMO1' AND
                 KSCHL = 'JMO2'.
    ENDSELECT.
    SELECT HWSTE
           FROM BSET INTO (ITFINAL-HWSTE_E)
           WHERE BELNR = ITFINAL-BELNR1 AND
                 BUKRS = P_BUKRS AND
                 GJAHR = P_GJAHR AND
                 KSCHL = 'JEC1' AND
                 KSCHL = 'JEC2'.
    ENDSELECT.
    MODIFY ITFINAL.
ENDLOOP.</b>
*Filtering the Internal Table w.r.t P.O History Category.
LOOP AT itfinal.
    IF itfinal-bewtp EQ 'E'.
      DELETE itfinal.
    ENDIF.
    itfinal-wrbtr_v = itfinal-wrbtr * itfinal-kursf.
    itfinal-wrbtr_r = itfinal-wrbtr_v / itfinal-menge.
    MODIFY itfinal.
ENDLOOP.
ENDFORM.                    " GETDATA
*&      Form ALV
      text
--> p1        text
<-- p2        text
FORM alv .
IF itfinal[] IS INITIAL.
    MESSAGE 'No Values exist for the Selection.' TYPE 'S'.
    STOP.
ENDIF.
LOOP AT itfinal.
    itfinal-sl_no = sy-tabix.
    MODIFY itfinal.
ENDLOOP.
DEFINE j_fieldcat.
    itfieldcat-fieldname = &1.
    itfieldcat-col_pos = &2.
    itfieldcat-seltext_l = &3.
    itfieldcat-do_sum = &4.
    itfieldcat-outputlen = &5.
    itfieldcat-edit = &6.
    append itfieldcat to itfieldcat.
    clear itfieldcat.
END-OF-DEFINITION.
j_fieldcat 'SL_NO' '' 'SL. NO' '' 03 ''.
j_fieldcat 'LFBNR' '' 'MATERIAL DOC.No.' '' 10 ''.
j_fieldcat 'BUDAT' '' 'POSTING DATE.' '' 08 ''.
j_fieldcat 'LIFNR' '' 'VENDOR' '' 10 ''.
j_fieldcat 'NAME1' '' 'VENDOR NAME.' '' 35 ''.
j_fieldcat 'XBLNR' '' 'SUPPLIER DOC.No.' ' ' 10 '' .
j_fieldcat 'BLDAT'   '' 'ACCOUNTING DOC.DATE' '' 08 ''.
j_fieldcat 'MATNR' '' 'PART No.' '' 18 ''.
j_fieldcat 'MAKTX' '' 'DESCRIPTION' '' 40 '' .
j_fieldcat 'MENGE' '' 'QUANTITY RECEIVED' '' 08 ''.
j_fieldcat 'KURSF' '' 'ECHANGE RATE' '' 13 ''.
j_fieldcat 'WRBTR_R' '' 'RATE' '' 13 ''.
j_fieldcat 'WRBTR_V' '' 'VALUE OF GOODS' '' 13 ''.
j_fieldcat 'HWSTE_C' '' 'ED/CVD' '' 13 ''.
j_fieldcat 'HWST_E' '' 'EDU.CESS' '' 13 ''.
j_fieldcat 'HWST_S' '' 'S&HE.CESS' '' 13 ''.
j_fieldcat 'BWTAR' '' 'VALUTAION TYPE' '' 10 ''.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = sy-repid
        is_layout               = itlayout
       i_callback_user_command = ' '
        i_callback_top_of_page = 'TOP'
        it_fieldcat             = itfieldcat[]
        i_save                  = 'A'
     is_variant              = ITVARIANT
        it_events               = itevent[]
     is_print                = ITPRINTPARAMS
        it_sort                 = itsort[]
      TABLES
        t_outtab                = itfinal
        EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " ALV
*&      Form TOP
    Top of page for ALV Report
FORM top.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
     EXPORTING
        i_list_type           = 0
     IMPORTING
        et_events             = itevent
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
string1 = 'Excise Input Details '.
CONCATENATE string1 p_werks date1 'to' date2 INTO title SEPARATED BY space.
walistheader-typ = 'H'.
walistheader-info = title.
APPEND walistheader TO itlistheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary      = itlistheader
    I_LOGO                   = ''.
    I_END_OF_LIST_GRID       =
   ENDIF.
CLEAR itlistheader.
ENDIF.
ENDFORM.                    "TOP
Thanks,
K.Kiran.
Message was edited by:
        Kiran K

Hi,
Use select single in the select statement.
Try using modify before endselect.
Thanks,
Sriram Ponna.

Work flow Notification is not sending

Hi
I had created workflow notification it is not sending in between two functions , for test purpouse i changed the place in the process it is working
Please help me on this...

Hi;
What is EBS version? What is error message at log file?
Please see:
Oracle Workflow FAQ [ID 465887.1]
Control - Workflow: Setup [ID 113664.1]
Oracle Workflow Best Practices Release 12 and Release 11i [ID 453137.1]
Oracle Workflow Release 12 Diagnostics [ID 469822.1]
OWF Diagnostics, Solutions and Information [ID 332152.1]
(How To Reset Workflow Administrator [ID 413711.1])
Also see:
11i/R12 - A guide for troubleshoting Workflow Notification Emails - Inbound and Outbound [ID 831982.1]
Notifications Not Being Sent In Workflow [ID 1012344.7]
Workflow Mailers Not Sending Notifications [ID 560472.1]
Regard
Helios

Task Flow Return Listener not fire when FK association fields set manually

Guys and Gals,
I've spent two solid days on this and I'm not sure why my task flow return listener is not firing.
I start by selecting a row in a table. I then click a "Convert" button which converts the Quote document into a Sales document. I then press Submit which commits the data and the task flow exits. At this point my task flow return listener should fire. It does not. This return listener would, in theory, refresh the visible Quotes table and update the selected Quote's status to "Closed".
The Quote's "Closed" status is a transient attribute which is calculated by looking at the Sales' document Qty attribute. If the Quote Qty = Sales Qty, then the status is closed. This can be measured by utilizing an association where
Sales' BaseRefDocId = Quotes' OrderId
Sales' BaseRefRowId = Quotes' RowId
Setting these two row attributes represent the association linking a Quote document row to a Sales document row.
        nvp.setAttribute("BaseRefDocId", baseRow.getAttribute("OrderId"));     // Take the Quote Id and put in the Sales' Id ref field
        nvp.setAttribute("BaseRefRowId", baseRow.getAttribute("Row_Id"));    // Take the Quote Row Id and put it in the Sales Row Id ref field
        targetRow.createAndInitRow(nvp);                                                    // Insert the new referenced row into the Sales' DocumentAfter two days of running tests, it is the code above that keeps the return listener from firing and the transient attribute from refreshing on the page. These fields are not mandatory, but are necessary for the Quotes status to change to closed. Simply leaving these lines of code out allows my task flow return listener to refresh correctly, albeit with an incorrect Quote status.
My expression language statements, however, evaluate correctly irregardless of table refresh. If I refresh the table manually, the status will then display the correct value. All other methods of manipulating the table function correctly i.e. task flow return statements work.
I'm pretty sure it has something to do with some kind of silent association / view link error blocking the task flow from firing behind the scenes.
Does anyone have any ideas? Using JDev 11.1.2.1.0.
Will

Hi Frank,
Yeah, I thought it was really weird as well. I banged my head up against the wall again today and finally managed to semi-fix the problem.
The "Convert" table toolbar button has a "Disabled" attribute that I've been setting with something like #{bindings.QuoteIterator.currentRow == null}. If I take this out, everything works fine. However, if I put it in, the task flow will not return. What's screwy is that I have several of these "Quote" tables for other data collections such as Sales, Deliveries, Invoices, etc. About half of them fire a task flow return with the "Disabled" attribute set for the convert button, and the other half don't. They all return a task flow return if I just set "Disabled" to false.
At three days and counting, this is really an issue I just don't get, and I'm not sure if I could reproduce the problem to submit it to support because everything appears just fine and I've been digging for days.

Detail not appearing when syncing

For some reason, all I get when I try to sync my iPhone or iPad to iTunes is a summary tab... no other detail appears. I never had a problem before, and no new versions of anything have been added to my machine or my iPhone or iPad.
Looks like my device backup are gone from the Preferences panel, too!
I'm using OS X Mavericks 9.1 (I select that in the pop-up menu but the system overwrites it for some reason).

Thank you to the Apple support people who forwarded some troubleshooting articles to me. I had read all those articles before I posted this message.
The articles seem refer to cases where the device is not showing up in iTunes. My devices do show up, they just don't seem to be recognized as the same devices the iTunes has been syncing with over the past year. The sync option is dimmed for some reason.

ECC invoice system not filling the Assignment CRM created invoice.

Dear Guru,
We having the service process like below.
1.Service order creation with the service line item.
2.Service confirmation created.
3.Invoice is created
4. invoice transferred to the ECC.
Invoice is created and transferred to the ECC system not filling the Assignment (Service order no) in the ECC invoice document.
Best Regards,
Prakesh

duplicate is created

In my work flow Invoice Details not geting when Dispute case created?

Similar Messages

Maybe you are looking for