In Nautilus, mounted network shares not showing up right away

I've noticed a strange problem recently (last couple of weeks) where my mounted network shares don't always show up right away in Nautilus (side bar or desktop- like they used to). For example, if I manually mount an NFS share in CL to /media/files it won't pop up in Nautilus right away like it used to. It will only show up after several minutes or if I plug in a thumb drive to trigger it to refresh. Also, when my computer is in suspend and I resume it, all predefined network share mounts in fstab that are indeed mounted won't be present in Nautilus upon resuming from suspend (they did before).
I'm not sure where the problem lies as Nautilus or dbus haven't been upgraded in the repositories recently. I tried looking at recently updated packages but I can't pin it on one that would be causing the problem. I'd like to get an idea of what packages are affected before submitting a bug report. If anyone has any idea on the package I can downgrade no problem and test this further.

Figured out the last filesystem upgrade from Decemeber is causing this. Bug posted- FS#27851.

Similar Messages

Network shares not showing up in finder osx Lion

The shares on my network are not showing after I tried this SMBup. I tried to follow this guide but things didn't turn up as I was expecting them to work.http://knowledgebase.hsti.com/re-installing-smb-on-mac-os-x-lion-10-7-x
This is the official website where in the middle of the page there is a note stating that "SMBUp installs Samba, which in turn replaces Apple’s OS X’s native netbios and SMB services. This means that while connecting to servers from the Finder remains functional, the Finder won’t be able to “browse” network services and servers from the network won’t show up in the Finder’s sidebar. Be advised."http://eduo.info/apps/smbup
So i uninstall the samba restart the machine and now my shares don't show in the left side pane of finder. How can I get them back. Is the netbios service disabled

Open Terminal and issue the following command
ps aux | grep netbios[d]
if you get a line similar to this
_netbios 45 0,0 0,0 2477156 2456 ?? SNs 9:14am 0:02.44 /usr/sbin/netbiosd
then the daemon is running, otherwise issue the following command to start netbiosd permanently
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.netbiosd.plist

Why is a network share not showing up in time machine settings when on the wifi?

Hi all,
I am currently trying to set up time machine for my Macbook air. I have connected an external harddrive to the network router and made it available as a network share. I have both read and write access to the drive, when mounted as a an SMB volume and while connect to the network via Wifi. However, when opening time machine settings and trying to select the backup volume, the network drive doesn't show up.
What's wrong?
Kind regards,
Martin

Time Machine cannot backup to a SMB network volume.
Time Machine may also have problems backing up to AFP volumes on some network attached storage devices (NAS).

Network shares not showing in the sidebar

Since ugrading our clients Macs to Lion, any network shares that are managed using workgroup manager are no longer showing up in the users sidebar, and if I try to drag the share to the sidebar it stays for a second then disappears ( the sidebar preferences are set to show the shares)
But if I eject the share and re-connect then it does appear in the sidebar as expected, and ideas how to make it show up on first connection without having to disconnect and reconnect?

Thanks, I did delete the file several times, restating after each attempt. I also tried from guest and other user account - exact same.
Curiously,... the 'shared" and connected devices have started to randomly reappear. I know there are devices connected all the time. So I dont know whats going on.
Bring back SL.

Network shares not showing up in finder

This one has me stumped. I have a 3 computer set up, macbook 10.5.8, imac 10.6.6 and a macbook pro 10.5.8. From both the macbook and iMac I am able to see all other machines on the network and connect with no problem. On the pro I cannot see any of the other machines on the network. I can connect to them using command K and typing in that information, but under shared in the finder it doesn't list anything. I've poured through everything I can think of and every machine is identical in setup. Same workgroup, same firewall setup, same share set up, same everything. Can't figure this one out. I've also had issues with the pro disappearing from the other machine's shared section after time has gone by with no activity. The pro is not in a sleep state at these times and even if I go back to the machine and get it fully running again the connection is lost until I do a restart. FYI all of the machines are in the same vicinity and connecting to the same router so I don't think connectivity is an issue. I don't know if it's related because I haven't had this problem in about 2 weeks and I think I figured it out but the pro was having connection problems a few weeks ago every so often. When I would turn it on it would self assign an ip address. I tracked that problem down to a router security issue and believe I have fixed it but thought I would include that information. Before I figured out how to fix the problem a short term fix was to take the file from Library/Preferences/System Configuration and trash it and then do a restart. The system would rebuild the file and the issue would be taken care of temporarily. Don't think this has anything to do with my current problem either but thought I would include it just in case. What did I miss?

Open Terminal and issue the following command
ps aux | grep netbios[d]
if you get a line similar to this
_netbios 45 0,0 0,0 2477156 2456 ?? SNs 9:14am 0:02.44 /usr/sbin/netbiosd
then the daemon is running, otherwise issue the following command to start netbiosd permanently
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.netbiosd.plist

Adding shared printers? Network printer not showing up in list

I have a network printer not showing up in the Bonjour Printer Wizard. There is not a place to add a printer to this list. Does my network printer need to be installed under the Windows side as well, or can I share it using Bonjour? I'm confused as to how the shared printer program works. Also, my Adobe "print to pdf" option shows up as a printer, but how do I change the file destination location? It doesn't give me an option to change the "saved to" location. I am using these printers through Parallels in AutoCad, and that should be the only reason I will need to share printers. But I am in AutoCad a good deal of time, so I need to know how to quickly print my drawings.

Welcome to the forums!
You don't say if you installed after downloading the Printer you deleted, but I suspect it's one not showing, and that you need to reinstall.

Wireless network connection not showing up in network connections

Hi, Experts,
I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet.
How to set up the wireless network connection that it will show up in network connections? Thank you very much for your help.

Issue Resolved. I did not turn on the wireless switch.

Why is it my network does not show up any longer on wifi for ipad? Have tried network reset still not tere cannot go to internet

have tried network reset but my network is not showing cnnot access internet.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My iphone problem is network bar not show for searching why how can resolved my iphone

my iphone problem is network bar not show for searching why how can resolved my iphone
my iphone model is MD239B/A
my iphone serial no: DQ******TD2
<Edited by Host>

Hi mirza_ali,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
iOS: Understanding cellular data networks
iPhone: Wireless carrier support and features
I hope this information helps ....
Have a great day!
- Judy

Ort Express- my network suddenly not showing up. System preferences, advanced/network shows network. Opened Airport Utility options grayed out except configure other but no luck. No set up assistant option to reenter. Not sure where to go from here?.

Airport Express.
My network suddenly not showing up. Openend system preferences/Network & my network is there. When I open Airport Utility, most option are grayed out except "configure other" with no change. Utility does not provide option for setup assistant where I could just start over. So no wifi without network set up and can't use ethernet/router to troubleshoot. I am stuck any assistance helpful.

So I went back to the PC after my original post, and somehow I was able to connect to the AirPort wireless network in the Windows Wireless Network List. Once I did this, it showed up in the AirPort Utility, and I was able to access the internet. I have no idea what fixed the problem, but maybe it was simply a matter of waiting a few minutes before connecting to the network?

Site not showing up right in internet explorer

I am new to dreamweaver and I loaded up my first test page
and it looks fine in firefox, but in internet explorer it is not
showing up right. I made a template for this. I am using tables
nesting inside of tables would this be causing the problem? If this
is the problem how would I fix this?
Thanks

Unless you upload your page to a server for the rest of us to
see, theres
not much we can do to help....we need to see your code...
"littlemax" <[email protected]> wrote in
message
news:ejr0p2$k7v$[email protected]..
>I am new to dreamweaver and I loaded up my first test
page and it looks
>fine in
> firefox, but in internet explorer it is not showing up
right. I made a
> template
> for this. I am using tables nesting inside of tables
would this be causing
> the
> problem? If this is the problem how would I fix this?
>
> Thanks
>

Why does the calender do not show the right time if you want to choose 10, 11, 12 o'clock or any other time with 1x:00?

Why does the calender do not show the right time if you want to choose 10, 11, 12 o'clock or any other time with 1x:00? It only shows 1:00 and there is no way to change the time to 1x:00.

Ok well you need to get your facts straight. You say the reason to upgrade to OS 4 but half of these have to do with the new iPhone 4 and not the OS. Two totally different issues

I dropped my ipod in the toilet, I haven't fixed it for months. I didn't know you could put it in rice, or to not open it right away. Is it too late to fix it, or a place? The ipod is really important to me, it has been with me forever.

I dropped my ipod in the toilet, I haven't fixed it for months. I didn't know you could put it in rice, or to not open it right away. Is it too late to fix it, or is there a place I could bring it to? I don't want to get a new one. The ipod is really important to me, it has been with me forever, and there is important stuff on it.

There are companies that specialize in data retrieval but it's costly (probably cheaper to buy a new iPod) and more than likely as Allan said, your circuits are probably damaged beyond all hope of retrieving anything. It's worth calling Apple you maybe able to get a discount or a refurbished iPod. Can't hurt to ask, Good luck. (And in the future... no texting in the john.) Sorry, couldn't resist it.

Network devices not showing up under "shared" in finder bar

Ok so i have a network that consists of a maxtor nas device, 2 win xp pc's, 1 win7 pc, d-link 524 router, and my macbook pro. I would like to be able to transfer files between my mac and the devices and use the printer attached to my maxtor. My issue is that none of the computers show up under the "shared" section of finder or under network. I use to have this issue with leopard but it resolved itself. Now under snow leopard for a couple months and i have yet to get it work. I can access my mac and other pcs from a pc. Anyone know how to get my network to show up on my mac?

Your problem is very common under Snow. At first my shares did not show up under shared in finder windows. I, then, of course, used "Connect to Server" to connect to the shares--both Mac and PC. I found that the more I kept the shares active the more likely they were show up under shared. Then, I discovered that if I kept the computers from sleeping during the period of needed access they would tend to stay in shared without nearly so much keeping the connections active.
If you do not like the above work around, then there are two other possibilities. You can elect to show mounted items on your desktop. Do that and connect to each share. Then, go > users > unlock > + login options > try dragging the mounted shares to the login item window. If successful, then the shares should be available at login.
Another approach is to mount and connect as indicated above. Then, making an alias to the share should at least make things faster.

How to mount network share on lion permanently

I want to know how to mount a network share from my NAS on mountian lion.
I have seen and tried the suggestions about using command+k or the "go connect to server" and mounting that way so the password for the share is put into the keychain, then dragging the now mounted share to the system preferences user login items.
However this isn't satisfactory. It causes windows to pop up for each share that I have when logging in.
What I Want is for the share to appear as a mounted hard drive in the left navigation column of the finder window. I'd also like to be able to make a shortcut to the share on my desktop (or put it in my dock bar). If it shows up under devices that is perfection okay too, just so it's there somewhere logical.
The pop up windows simply clutter up the desktop, and if they are closed, then the share is closed too, and then there is a manual process of having to use the very tedious command+k or go connect to server method to connect again.
I need them to be able to click and open the share. I don't need them wasting time putting in share paswords and the link over and over.. the share should just be there for them as they work through the day. And if they close the folder/window, then it should be easy to get back to it.
This is possible on windows and I want these mounts to work the same way.
note: my NAS uses smb

That should work. You could try deleting the passwords in Keychain associated with it and try it again.
Another route: Create Applescript:
Select the network drive and get info on it. Copy the server address. Open up Applescript Editor in the Utilities folder and create a new script. Type in mount volume, add space, "paste server address within quotations", and save as application to your documents. Run it from within applescript editor to verify it works. When it asks for a passwork, save it in Keychain.
Under system preferences/accounts/login items, click the + sign to add and select the saved application.

In Nautilus, mounted network shares not showing up right away

Similar Messages

Maybe you are looking for