In need of A LOT of help
My iPod Touch won't turn on. It's still detected by iTunes and it said I have to restore it, but it gave me the error 1601, twice. How can I get it to work again?
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694#error1601
Similar Messages
-
New and in need of a lot of help
Hi guys I think i have G3 i don't really know what all that means but i still need your help. I have never even touched an apple computer before so bear with me please. I have a linksys SRX 200 wireless router and I need to know if I can get the apple to work with it. I really don't want to have run wires through the house just to get internet. So any help will be greatly appreciated. Thank you in advance:)
Use these resources to identify your iMac:
Apple History.
Low End Mac.
Apple iMac identification..
Compare this information to that which you'll find in Apple Menu > About this Mac > More Info.
Airport cards are expensive as they are in limited supply and USB dongles are unreliable (and if you are still using OS 9 probably impossible to find a driver).
I'd look at alternative technology like the Ethernet over Mains (much faster than even Airport Extreme and then you've got Ethernet supplied to every room in the house).
mrtotes -
I purchased 2 ringtones in "i tune store", but i think i made a big mistake; please help me because Im afraid that i will be charged a lot; <Edited by Host> ; i need a live person to help me.
CatherineThese forums are not moderated by Apple, we are all Users like you.
Posting your personal phone number here is a terrible idea. I'll report your post to have a moderator edit out the sensetive info.
As to your actual concern, you can use iTunes Support, which also will refer you to THIS article (http://support.apple.com/kb/HT1933 about reporting issues with iTunes purchase -
i had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded...,. I need a lot of help please
Do the tracks show up in the Recently Added playlist? If so then something has gone wrong with the index of the Music playlist. Download the current iTunes Free Single of the Week. I know it sounds odd, but it should fix the problem. (Probably adding anything would do.)
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up.
tt2 -
Ok i need lots of help here... i have a WRT54G router and...
ok i need lots of help here... i have a WRT54G router and trying to hard wire a computer to it and wirelessly connect to a laptop... i have dsl internet connection... the power light is blinking constintly and when i try to setup the router the default password doesnt work already tried to reset the router and that didnt help... any thoughts> thanks
the power led blinking all the time can be caused by a corrupt firmware, or a defective power adapter, try doing a hard reset, you may need to do it a couple of times, and then power down both the modem and router.
after a couple minutes, power up the modem, wait for the link led lights up, then power up the router and look for it to link up with the modem, at this time the power led on the router should be on solid if all is ok.
if it still don't light solid, you may need to do a firmware update, or the router is defective. -
Novice in need of a bit of help
The last time I put together a website was with Frontpage, so
this is the first time i've attempted to do serious work in DW.
I'm currently at a stage where i've done the website layout
in PS, have sliced it up in IR and am editing it in DW. I've also
done a Flash menu that i'm trying to integrate into DW.
I've run into a number of problems though:-
1. I can't seem to move the images around in DW - the center
of the website will be taken up by a white portion (where all the
text will go) and i've tried to delete that and put it back in as a
background image. But when I do that, the image that's directly
below it (a grey bar for the bottom of the website) get's pushed
up. I can't seem to move any of the images around. Is there a way
of locking all of the images, bar the one that's currently
selected, that I don't want to immediately move around (e.g. with
different layers in PS)?
2. When I try to import the Flash menu into DW, I can't move
it around either. It just sits in the spot it was inserted in.
Additionally, I can't find a way of giving the Flash menu a
transparent background. I just need the Flash buttons to sit over
the background image. Is that something I need to correct in Flash
or can I do that in DW?
3. When I eventually get the Flash menu sitting nice and
pretty on top of the background image, how do I link the Flash
buttons to the different pages?
4. How do I insert a pdf d/l function into the website?
There'll be a tonne of documents on there (it's for a small
accounting firm) and the client wants the ability to offer some of
the documents as pdf downloads.
Any help/advice'd concerning these issues would be greatly
appreciated, thanks.> I'm currently at a stage where i've done the website
layout in PS, have
> sliced
> it up in IR and am editing it in DW. I've also done a
Flash menu that i'm
> trying to integrate into DW.
While this is not surprising, it's a VERY bad start. One
should never use
HTML written by a graphics program for 'serious' work. It's
fragile, and
poorly formed, and will break at the slightest provocation.
I'd guess that
in excess of 20% of all the posts here are directly related
to the use of
such HTML.
In addition, Flash menus are bad business. You create a
monster for
yourself, since DW will not manage the links in that menu, in
the event that
files are named or moved from their current location. They
are also
inaccessible to those using screen assistive devices, and are
just downright
bad.
> 1. I can't seem to move the images around in DW - the
center of the
> website
> will be taken up by a white portion (where all the text
will go) and i've
> tried
> to delete that and put it back in as a background image.
But when I do
> that,
> the image that's directly below it (a grey bar for the
bottom of the
> website)
> get's pushed up. I can't seem to move any of the images
around. Is there
> a
> way of locking all of the images, bar the one that's
currently selected,
> that I
> don't want to immediately move around (e.g. with
different layers in PS)?
You are suffering from a well-known disease, called "trying
to build HTML
pages without knowing HTML", often also called "trying to use
an HTML
authoring program as if it were Microsoft Word". I'm not
trying to be
snarky here. You will just need to learn some HTML. When you
do this, you
will quickly discover that HTML doesn't allow you to just put
things on the
page as if it were a graphics program, or a printed page
layout program.
> 2. When I try to import the Flash menu into DW, I can't
move it around
> either.
> It just sits in the spot it was inserted in.
Additionally, I can't find a
> way
> of giving the Flash menu a transparent background. I
just need the Flash
> buttons to sit over the background image. Is that
something I need to
> correct
> in Flash or can I do that in DW?
See above. Also, to make Flash transparent is a trick. You
can use the
Flash
wmode parameter (however, Safari does not support this
properly!).
Adobe articles:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15523
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14201
> 3. When I eventually get the Flash menu sitting nice and
pretty on top of
> the
> background image, how do I link the Flash buttons to the
different pages?
You have to do this in Flash, not HTML - another good reason
not to use
Flash Buttons.
> 4. How do I insert a pdf d/l function into the website?
There'll be a
> tonne
> of documents on there (it's for a small accounting firm)
and the client
> wants
> the ability to offer some of the documents as pdf
downloads.
Zip them, and link to the zipped document as you would to any
other file.
You can force a download, but that would require
server-scripting that I
don't think you are ready for yet.
Good luck - there's lots of help here to get you up to speed.
Don't be shy
about seeking it!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Lantonator" <[email protected]> wrote in
message
news:[email protected]...
> The last time I put together a website was with
Frontpage, so this is the
> first
> time i've attempted to do serious work in DW.
>
> I'm currently at a stage where i've done the website
layout in PS, have
> sliced
> it up in IR and am editing it in DW. I've also done a
Flash menu that i'm
> trying to integrate into DW.
>
> I've run into a number of problems though:-
>
> 1. I can't seem to move the images around in DW - the
center of the
> website
> will be taken up by a white portion (where all the text
will go) and i've
> tried
> to delete that and put it back in as a background image.
But when I do
> that,
> the image that's directly below it (a grey bar for the
bottom of the
> website)
> get's pushed up. I can't seem to move any of the images
around. Is there
> a
> way of locking all of the images, bar the one that's
currently selected,
> that I
> don't want to immediately move around (e.g. with
different layers in PS)?
>
> 2. When I try to import the Flash menu into DW, I can't
move it around
> either.
> It just sits in the spot it was inserted in.
Additionally, I can't find a
> way
> of giving the Flash menu a transparent background. I
just need the Flash
> buttons to sit over the background image. Is that
something I need to
> correct
> in Flash or can I do that in DW?
>
> 3. When I eventually get the Flash menu sitting nice and
pretty on top of
> the
> background image, how do I link the Flash buttons to the
different pages?
>
> 4. How do I insert a pdf d/l function into the website?
There'll be a
> tonne
> of documents on there (it's for a small accounting firm)
and the client
> wants
> the ability to offer some of the documents as pdf
downloads.
>
> Any help/advice'd concerning these issues would be
greatly appreciated,
> thanks.
> -
I have an error message that reads: java.lang.noclassdefFounder - need to fix can anyone help?
That's a bug in whatever Java program you're running.
That's not an error specific to OS X.
(There's usually a whole lot more text dumped by Java, too.)
Check with whoever wrote or is supporting the package you're working with. -
How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!
Because you can only synce with one iTunes library and you are switching libries by using the new computer. To nake this yyour syncing computer:
- Move all the media(apps, music, synced video and photos etc) to the new computer.
- Connect the iPofd yo the computer and bake a backup fo the iPod by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
Note that the backup that iTunes makes doe not include media.
To move mdia to the new computer see:
iTunes: How to move your music to a new computer
iTunes Store: Transferring purchases from your iOS device or iPod to a computer -
I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.
So just to be clear, when you say "just bought" how long ago was that? Is it on this new iPhone that you had pictures, texts, etc that you want? Were you backing up to iCloud or onto iTunes?
This may not help for everything but if you go to iCloud.com and log in, are you able to find your pictures there? -
Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy
Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Some basic printer troubleshooting steps before worrying about a printer driver:
1. Have you tried turning the printer off and back on?
2A. Is the printer attached with a cable?
If yes, have you tried unplugging and re-plugging both ends of the printer cable?
If that does not help, can you test the printer with another cable?
2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
Have you tried restarting your wireless router?
3. Have you tried restarting your MacBook? (Be sure to save your work first.)
4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
5. Have you updated OS X or the program you're trying to print from recently? -
I just need a little bit of help. I visited the american ap store, using my i phone, to check out something. I dont have an account with them so I couldn't get what I wanted anyway.Now, I need to get back to the australian store and I don't know how to do that. Please help!
Go to app store- scroll down to bottom- click on apple id- change country
-
I have QuickTime Player 7.6.8, I cannot update or remove it b/c I am missing QuickTime.msi file. It is gone and I need it back. Please help.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
My ipad and mini pad won't update though it says several apps are in need of updates. Please help!
Try updating from here:
App Store>Purchased
Note: You'll have to look out for apps that need update. -
I have an nano - no clue how to sync it after everything downloaded. HEEEEEELP! I need a smart person to help me.
You might have better luck in the iPod Nano forum at https://discussions.apple.com/community/ipod/ipod_nano?view=discussions
-
HELP needed !!! pleace help !!
I have a problem. this is the site (
http://home.planet.nl/~onbe1102/prikbord.html
its a flash site and when i click to the name buttons i would
like to open a *.XLS file or a site.
the action fore the buttons ar now:
btnWilliam_mc.onRollOver = function() {
btnWilliam_mc.gotoAndPlay("_over");
btnWilliam_mc.onRollOut = function() {
btnWilliam_mc.gotoAndPlay("_out");
btnArnold_mc.onRollOver = function() {
btnArnold_mc.gotoAndPlay("_over");
btnArnold_mc.onRollOut = function() {
btnArnold_mc.gotoAndPlay("_out");
btnAbal_mc.onRollOver = function() {
btnAbal_mc.gotoAndPlay("_over");
btnAbal_mc.onRollOut = function() {
btnAbal_mc.gotoAndPlay("_out");
pleace help !!! what am i doing wrong????
HELP needed !!! pleace help !!You need a command that tells the button to open something
btnAbal_mc.onRollOut = function() {
getURL("name.xls or what ever", "_blank");
The rollover and rollout are animations and you needed to
tell the buttons to do something. Hope this helped
Maybe you are looking for
-
ISE 1.2 Guest Report based on specific Guest IP Address
Hi I have a simple requirement which I am not able to find the way. Maybe someone can help me out. I have a WLC / WiSM2 (7.5) Guest Controller and ISE 1.2 (Patch5) in production with only CWA for Guest Access. Since I should create a query based on t
-
Restore content from Apple TV to HDD
I've been synching content between the Apple TV and an external drive. The external drive failed. Does anyone know if you can restore the content from the Apple TV back to a new hard drive array?
-
Documentation for Enhancement spots
Hi experts! I need some advice to my simple problem. I checked one of our custom Z* function modules with 'Where Used' icon, and it shows that it's used in two different enhancement implementations. Those are: LMRMPU05 633 E
-
I got oracle reports APEX integration working like the how to, and even got the SSO to work, but here are some issues I'm having. 1) Using ODM is a nightmare, not fun at all. I would like to use databse usernames/passwords, not separate LDAP. 2) when
-
I have SQL 2012 Always On Configured in my environment. In datacenter 1 (DC1) I have SQL1. In DC2 I have SQL2. These nodes participate in an Always On Protection Group. VMM1 DB in DC1 is on SQL1. VMM2 DB in DC2 is on SQL2. My problem is that sin