In need of a Mighty Mouse Track Ball

Something small and hard, fell in the mouse track ball area and while i was pressing it (upside down) on a piece of paper to clean it, that little hard piece of dust, carved the surface of my track ball making it unable to scroll without jumping around!
So im now in the need of purchasing a new ball and replacing it! Does the ball as a part exist? Because i can't find anything on ebay! Any help?

What exactly am i looking for in the "about this Mac" specs? I mean i have found the mouses info, i think this is it:
but what numbers must be used in order to locate it from mouseballz website?

Similar Messages

  • Mighty Mouse Track Ball

    Does any one else have issues with the mighty mouse track ball?? My does not work half the time. When it is working it will only work in one direction half of that time.
    Does anyone know of ways to clean it?? Or keep this from happening?
    Cameron
    MBP 15.4"   Mac OS X (10.4.8)  

    I've read all the posting about this..in recent months I've been cleaning the track ball 6,7,8,9....times every day. I had planned to buy a wireless Mighty Mouse but not now, it'd be cheaper to sit in front of my Mac bashing my testicles with a mallet for the same effect. Apple, this is an utter design disaster. Like Joachim says, why not a mouse we can open and clean easily, or a larger, more robust track ball mechanism? I'm off to but a mouse by anyone but Apple...
    G5 i-Mac   Mac OS X (10.4.9)  

  • HT2845 why doesn't my mighty mouse track ball scroll up or down vertically?

    why doesn't my mighty mouse track ball scroll up or down vertically?

    Hi:
    New ones are not that expensive, but I would try running it up and down (vigorously) on microfiber cloth or a towel or something.
    If that does not fix it...yes I would buy a new one.  I like wireless ones anyway
    Barry

  • Mighty Mouse Tracking Ball

    The tracking ball on my Mighty Mouse works side-to-side and up, but not down. It feels as though there's some debris in the way preventing it from letting me scroll down.
    Is there a way to clean it with breaking it?
    Can I take it apart safely?
    Any reponses would be greatly appreciated.
    Thanks,
    Stephen
    17" iMac IDC iSight   Mac OS X (10.4.5)  

    Stephen,
    This has a tendency to happen a lot---for some reason it attracts dirt like anything.
    Just simply get a damp, lint-free fabric and rub it vigorously on the scroll button, making sure you let it roll freely as you do so (to get the entire ball on all sides)---right side up first, so you can see the smudge building up on the sides where the button meets the rest of the casing. You will see some particles get trapped in this a lot. Scrape off all the gook from there...
    Let it rest for a minute or two, to completely dry it from the dampness caused by the fabric, and then turn it upside down while rolling the button to free any other remaining residue...
    Here's the link fron Apple's Support pages:
    http://docs.info.apple.com/article.html?artnum=302417
    Hope that helps

  • Mighty Mouse track ball button

    I have been using Snow Leopard for a while and one of the things that I like the most is that I can choose what I want to see in my screen when I move my cursor to the lower right or left corner.
    I have it set up as to SHOW ALL WINDOWS if I move my cursor to the lower right corner, well after I moved to LION that is no loger an option, instead of showing all windows open all it shows are the open windows open of the same application only, How can I set it up the way it was before, is there like a script or something.
    also can it be set up so when I click the tracking ball on my Might Mouse to show ALL windows and not just the program windows?

    I've read all the posting about this..in recent months I've been cleaning the track ball 6,7,8,9....times every day. I had planned to buy a wireless Mighty Mouse but not now, it'd be cheaper to sit in front of my Mac bashing my testicles with a mallet for the same effect. Apple, this is an utter design disaster. Like Joachim says, why not a mouse we can open and clean easily, or a larger, more robust track ball mechanism? I'm off to but a mouse by anyone but Apple...
    G5 i-Mac   Mac OS X (10.4.9)  

  • Mighty mouse: tracking ball not working well

    "No, kidding", I am sure you are all saying:)
    The mouse works in three directions, but not going down. I have just read another post where someone with the same identical problem as me was told to turn it upside down and rub it vigorously onto a piece of paper. I have done that, but there is no change. Any advice??? Thanks.
    A.

    The phone number I found in my manual in the UK is (44) 0870 876 0753.
    Personally I find the website OK but I have to admit sometimes I get a little frustrated but overall I find it very helpful. Last you can always use Google, which is extremely easy.
    As I mentioned you can always go to an Apple Store, here is the link so you can search for the closest store in the UK there are quite a few. I know there is at least one store in Glasgow of course I have no idea how close that is to you.
    http://www.apple.com/uk/retail/
    I'm afraid I can't help you on their policies however if you would like to provide Apple feedback go to www.apple.com/feedback.
    Roger

  • Mighty Mouse Scroll Ball always breaks

    Hi, I have a 2 month old iMac, and This has been a problem for about 6 weeks, but I haven't gotten around to posting it. My mighty mouse scroll ball breaks repeatedly and I have been fixing it, but it is a real pain. Don't suggest not using my mighty mouse, because I love and hate it, I love how it has multiple buttons, but hate how the scroll ball breaks all the time, can someone help me?

    It just needs cleaning. Use a damp cotton rag and vigorously move it across the mouse ball. Do this for about 30 seconds. BTW, there are instructions in your owners manual about this. This is from page 63 of your Users Guide:
    *Cleaning Your Mighty Mouse*
    You may need to clean your mouse from time to time to remove dirt and dust that has
    accumulated in the scroll ball area. Hold the mouse upside-down and roll the scroll ball
    vigorously with the cloth that came with your iMac, or another clean, soft, lint-free
    cloth, to help dislodge any particles that may interfere with proper scrolling.

  • Need Help: Wireless Mighty Mouse's Roller Ball Sluggish, Not Sensitive...

    Hello all.
    *I have followed Apple's Support Docu* to "hold the mouse upside-down and roll the ball vigorously while cleaning it to help dislodge any particles that may have collected on the internal hardware".
    But after I did that a few times, *my Mighty Mouse's rolling is still very sluggish, especially rolling/scrolling downwards, it is very in-sensitive, I almost have to push down the roller ball hard and scroll, then it will be effective.*
    *Any idea to fix this?* Or my mouse's "time is up"?
    Thanks and cheers

    Sure just needs cleaning. Get some Foam cleaner. Spray on tissue/cloth flip mouse upside down and scroll in the problematic direction for 2 mins.
    Add more foam cleaner to cloth and repeat until you have completed the points on a Compass.
    Its dirt and grease that causes that. Its a known design problem. A simple clean usually resolves for a few months and then you have to repeat again.
    ANY CHEAP FOAM CLEANER SPRAY WORKS FINE. as long as its for Computers.

  • Mighty Mouse scroll ball problems

    I wondered if anyone could help me with a scrolling issue with the mighty mouse. Some days scrolling works vertically up and down and other times just one direction. I dont believe it is due to dirt in the mouse - it seems software related and is sporadic in its operation. Any advise you could give would be welcome
    Thanks
    Nick

    DP, that is what worked best for me in the past.
    After months of problems with the scrolling ball, and after trying all the suggestions found on the web, this method of using a white sheet of paper was an excellent one: my MM was again clean and working as if it was new!
    However, be careful about it: don't push too much when running the MM upside down. Eventually, yes, the gunk will come out, but the ball would go down-inside the case if pressed too hard for too long. It happened to me when using this method for a second time, and I was in the need to disassemble the device in order to correct this, and I think that's exactly what I was trying to avoid in the first place.
    Hope it helps.
    JJ

  • Mighty Mouse scroll ball has issues

    I've had my Mighty Mouse for about a month of standard use, but suddenly the scroll ball will no longer scroll down (up and side-to-side are fine). I've carefully cleaned the ball, to no avail. I understand that some others have had issues, but that their issues remain unsolvable (they contacted Apple Support for an exchange).
    1) Can any one tell me the number to call Apple (from the USA)? I haven't been able to find it on the site map (all the support numbers are associated with AppleCare).
    2) I only noticed the problem after the upgrade to X.4.4. Could that possibly have anything to do with the problem?

    Hi Jessica,
    It could be a software or a hardware problem, I had the same problem with my MM but made the mistake of disassembling it.
    Take the mouse to another Mac and see if it works, then you'll know it's a MM problem.
    When you roll the ball do you hear a slight clicking noise? This would mean the ball is making contact with the rollers.
    Maybe the ball needs to dry or be cleaned with rubbing alcohol (as it evaporates)
    You would call the AppleCare number, and yes they might give you a headache about AppleCare, but tell them you have a hardware related warranty call.
    If you find it works on another recent Mac (with MM software installed) it might be a OS problem of some sort.
    What's good to do occassionally is to clone your boot drive, this way you can boot off a slightly older version of the OS to sort through bugs like this.
    It also makes a good backup method.
    http://homepage.mac.com/hogfish/Personal11.html

  • MIghty Mouse Scroll Ball

    Not really a MacBook Pro question, but it's the laptop I have so I wasn't sure where else to put it.
    The scroll ball on my mighty mouse has been acting up lately. Yesterday it wouldn't scroll down, but it would go up. I noticed when I pressed down really hard I could almost feel dirt or something. So I pressed down, moved it around in all directions, seemed to take care of it.
    Today it scrolls down but not up. Same trick didn't fix it. I suspect it just needs a good cleaning, but not really sure how to go about doing that. Any suggestions?

    Click here for instructions to clean the Mighty Mouse.

  • Mighty mouse scroll ball behavior

    Less than a week ago, I bought a Wireless Mighty Mouse. I thought that it was having trouble scrolling right, so I took it back for a replacement. This one seems to have the same problem.
    The problem seems to be that the mouse has a hard time scrolling right. To scroll up, down, or left, I only need to put the slightest pressure on the scroll ball. To scroll right, I need to press the ball about halfway down. It's not that it's a problem per se, but the user experience is just off enough to be frustrating. As a small note, the mouse makes different noises when scrolling up, down, and left, versus scrolling right. For scrolling UDL, it makes a small clicking noise. Scrolling right makes a sliding noise. When I push the ball in further and scroll right, I get the clicking noise.
    As I said, I've gone through 2 mice in less than a week. I thought the first might have been a fluke. Not that I've run into two with the same "problem", (and from two different stores), I wonder what's going on. It seems like it could either be a manufacturing defect that affected a whole batch, or perhaps this is the expected behavior. I can't imagine that my fingers are so oily that they would have gummed up the ball instantly. And yes, I have tried just about every cleaning method.
    So the questions are: how does your scroll ball work? How much pressure do you need? And has anybody had problems only with scrolling right?

    bytecrafter - I did some searching and found out a few tips that solved the problem for me.
    First, I blew compressed air into the scroll ball. I pushed down on it with my fingernail so that the air could get into the crack.
    Then I used a damp, lint-free cloth to rigorously clean the scroll ball, while the mouse was upside down. Apple has a video (and instructions) of this here:
    http://docs.info.apple.com/article.html?artnum=302417
    Hope that helps.

  • Mouse Track Ball only working in one direction

    Hello,
    My Mighty Mouse is 3 months old and now the track ball is only working in one dircetion.
    When I move the ball forward I hear the distinct sound and the scroll bar on e.g. Safari moves, but when I reverse there is no movement on the screen.
    I don't hear the same sound as when I move the track ball forward.
    I have tried to reboot but no improvement.
    Have someone seen teh same issue? Is the solution to simply replace the mouse?
    Thanks / Christer

    Use the instructions in this article to clean the mouse.
    (15069)

  • Wireless Mighty Mouse Tracking Problem

    I'm finding that sometimes my mighty mouse is not tracking downwards.
    During these blips it will still tracking left / right and upwards.
    When this happens, I can feel that the 'wheel' is not engaging the internal mechanism that drives the scrolling / tracking. After sometime of operation the mouse starts tracking again and I can physically 'feel' that the 'wheel' is engaging the internal mechanism.
    Does anyone know if this is a common problem, does hte mouse need to be cleaned inside? Do I need a new one??
    Luke

    Hi
    There are many threads on this but here's Apple's advice:
    http://docs.info.apple.com/article.html?artnum=302417
    Steve

  • Mighty mouse - tracking sluggish w/ new MacPro

    Set up a new MacPro w/ AirPort and BT with the Apple BT KB and Mighty Mouse. Arrived with dead batteries. With fresh batteries in my office mouse tracked fine. At new location, tracking now unusable. MacPro doesn't seem to support ext antenna for AP or BT, so is there any possible remedy for this poor signal/tracking?
    MacPro 2x2.6GHz, 4GB ram, Radeon X1900, 2x500GB SATA HD. MacOS X 10.4.8.
    Thanks

    Dear poor friend,
    I am facing the same very problem here. It started last monday when I updated the OS and the system requested to restart. I restarted it and then Voala!!! My Magic mouse stopped tracking. Like you I can scroll, click, perform some gestures... but thats all.
    I still have 8 months of warranty and as I discussed with "Apple Care Specialist" I should reinstall the Mac OS X overlapping the current system. I did that and nothing..... Then he recomnended me to take my mac to a service center.
    I live in Brazil and here the Service Center system is always down. I tried to take my MacPro there three times (iPlace in Shopping Ibirapuera) and I always heard that the system was down and they didnt even try to check it.
    So I called the Apple Care Again, this time the Super Advanced Specialist told me to FORMAT my disk and reinstall the system once more.... I had no option and I lost everything in this process....
    My mouse worked for few minutes and then..... Ta daaaa!!!... it stopped again...
    Then this super Advanced Specialist said that this problem might be related to the firmware and only Service Center can give a look...
    That means... DEAD END for me...
    I was an apple maniac fanboy until today... I cannot accept that my mouse is not working...
    APPLE, please, release a patch to fix this problem to occur again. Fix my Mac without the need to bring it to a Service Center.!!!
    Best Regards,
    Disappointed client.

Maybe you are looking for