In need of a soundcard - windows xp x64 and 4gb

Hello everybody!
I?got?a?new?5. surround?system?and?an?Audigy?2?ZS?last week... I was wondering why the sound of the rear speakers was coming out of the front ones. Well after some hours i found out that there exists a bug if you have 4gb?of?ram?or?more. I?tried?out?everything?I?found?on?the?net,?even?at ?least?5?versions?of?Youp-Pax?drivers?couldn't?fix?my?issue. Conclusion?=?resell?Audigy?2?ZS.
Now?to?my?question?since?my?onboard?sound?isn't?re ally?satisfying. Are?there?any?X-Fi?cards?that?will?work?with?my?windows?xp?x64 system with 4gb ram?(The soundcard should run with original drivers since I'm in need of EAX for gaming)
System?Configuration:
Abit'sAB9?Pro?(Mainboard)
Intel?Core2Duo?,86?Ghz E6300
Nvidia?GeForce?7950?GT 52 MB
Onboard?sound?Realtek HD Audio?
4?GB?DDR2?800
Windows?XP?x64??
500 GB raid?5
Thanks in advance,
Chrs?

victor,
You said 'if the download deosn't work'. Does that mean it didn't work for you?
What happens when you try to download the updater? You were trying to download the Windows version and not the Mac one?
You can't buy the cd anywhere, they just come supplied with iPods, and will more than likely contain an out of date software version in any case.

Similar Messages

I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom

I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom 5, now when I try to register I am asked for the original licence/serial number. Where do I go from here??????

If you upgraded from 3.6 to 5 (you didn't indicate buying 4.4) then you will need the serial number from 3.6 in order to be able to use 5. If you did not keep a record of it there is a chance it might be available thru your Adobe account online, but if not, there is likely not much you can do except to return the upgrade and purchase a full version. Try contacting support using chat and explain your situation to see if they can help.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
If you did purchase 4.4 then that should be sufficient to use to activate 5.
I can never be sure what goes on with Lightroom, and the Adobe site (even when it works properly) makes finding information about products difficult these days so I am at a loss to confirm anything I say.

HT1386 Itune 11 on Windows 7 x64 and iPad 2. The device do not appear in Itunes.

Itune 11 on Windows 7 x64 and iPad 2.
On 3 different PC and 3 different iPad 2 when I installed iTunes 11.1 Windows Autoplay recognise the iPad but iTunes do not.
The device does not appear in iTunes and thus neither synchronisation nor backup are possible.
Reverting to the previous version of iTunes solved the issue.
However with IOS 7 iTunes 11.1 is required and I am back with the same issue. Could you please help?
Thanks and best regards

If you try syncing with iTunes again, perhaps the phantom album will be erased since it does not exist on the computer.
Have you tried restarting or maybe resetting the iPad to see if the album will disappear?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

If i upgrade to mountain lion (from lion), will i need to reinstall my windows VM? and what about my apps and other stuff? will those need to be reinstalled too?

if i upgrade to mountain lion (from lion), will i need to reinstall my windows VM? and what about my apps and other stuff? will those need to be reinstalled too?

I started off with problems about being in the wrong region and now have Plug- in Failure
I am trying to access Setanta Sports Australia which requires
Microsoft Silverlight and was already pre-installed on a Macbook Pro Retina 2.5 ghz Intel core i5 with Mountain Lion 2.8.3
I have these different PlugIns active :
file://localhost/Library/Internet%20Plug-Ins/DivXBrowserPlugin.plugin/
file://localhost/Library/Internet%20Plug-Ins/Flash%20Player.plugin/
file://localhost/Library/Internet%20Plug-Ins/JavaAppletPlugin.plugin/
file://localhost/Library/Internet%20Plug-Ins/QuickTime%20Plugin.plugin/
file://localhost/Library/Internet%20Plug-Ins/Silverlight.plugin/

Windows 7 x64 and PDF thumbnails problems

I have CS5 and Acrobat 9 and under Vista x32 I could see the pdf thumbnails nicely. Yesterday I installed Windows 7 x64 and now all I can see are the Adobe icons. I read some other threads that describe opening up the files through acrobat and then changing to either large icon or extra large icon to fix the problem. This works, but when I go back through windows explorer everyhting is back to just icons. I have made sure that explorer is set to always view thumbnails and I don't have this problem with anyother file types such as Word documents or image files. I have also tried rebuilding the installation as anthoer poster had suggested. Has anyone found a permanent fix for this?
Thanks,
Troy
University of Nebraska - Lincoln
Department of Chemistry

Thanks for the link to the fix (by Pretentious Name . com).
I note that over a year has passed since you posted this solution, and Adobe has still not corrected the problem.
Problems, errors, and omissions in software are normal and acceptable - what is not acceptable is that Adobe choses to not take action to correct certain problems, especially when the user community identifies both the cause and the solution to the problem.
The folks at Adobe shoud take a close look at this web page: http://www.pretentiousname.com/adobe_pdf_x64_fix/ - it contains a complete and well-documented description of both the cause of the problem and the solution to the problem.

MT-M 8811-6JU Need ethernet/LAN driver windows 7 (x64)

I am unable to find the LAN driver for the MT-M 8811-6JU. I have put windows 7 x64 on the machine thinking I would have no issues since x32 ran just fin for months. If anyone can point me to the correct download this would be great.
I've tried all of these to no availe.
c2ent03us17
c3ent00us17_32
c3ent00us17_64
c4ent04us17_win7
c4ent04us17
q3ent14us13
q37z26us
q38z01us

Hi OdnsRvns, welcome to the forums,
the following driver should be the correct one for your system;
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS002864
you may want to save the following link to your favouites; it's the full driver matrix for the M55, 8811
http://support.lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-66441
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Which version packages do I need for T530 with Windows 7 x64?

- Power Management Driver:
This version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032258
Or this version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014939
- Intel Management Engine Firmware:
This version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028929
Or this version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032435
The reason I'm asking is because Lenovo Support Driver & Software website lists all these versions for T530 with Windows 7 x64.

usually i go for the newer version.
and on my thinkpad i installed power management driver version 1.66
and for ime firmware the second link you provided.
good luck

Driver for Deskjet 1220c (Windows 7 x64 and Windows Server 2008 R2)

Hi,
I've got a Deskjet 1220c and have recently upgraded two machines; one to Windows 7 Ultimate x64 and the other to Windows Server 2008 R2. Any idea where I can get printer drivers?
I'd like to try the Vista x64 drivers, though these were included on the Vista CD from MS, and not available as a separate download from HP (http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00868762).
I'd be grateful for any suggestions.
Thanks,
Mt

Hi
I had this trobule too. Below is the instructions to install driver. Disconnect your printer. In printers select add printer. Then click windows update (need internet) allow them to update and then select 1220c printer to install leaving as standard old port. Once installed go into printer properites and update to USB port.
Bingo it works!
Refer to the below link for full instructions.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796821&tmp_track_link=ot_recdoc/c01874792/en_...
Good luck
RB

Windows 7 x64 and x32 Netlogon 5719 errors

Ok, let me first start off by saying that this only happens on Windows 7 (x64 or x86). I do not have this problem with XP (x64 or x86).
I have several subnets for which I use the HP Procurve IP HELPER-ADDRESS. This also happens if the DHCP server is a physical or virtual machine. I was reading about the port fast option for RSTP (HP), though I can see if I need to use that if
it happens with XP and Windows 7. I tried the following:
Disabled IPv6
Tried a physical and virtual machine
Ran hotfix 2459530 for both x64 and x32
Tried the Broadcast registry fix instead of using unicast
Tried updating NIC drivers for both Intel and Broadcom
Changed the gateway for the DHCP options
Have GPO for "always wait for network before logon"
Have GPO for "Startup policy wait time (120 seconds)"
I still run into the issue that some Windows 7 machines will get the Netlogon 5719 errors on startup. I don't know where to go to next about this issue?? I'm hoping SP2 will help with this issue.

smKKe wrote:
Ok, let me first start off by saying that this only happens on
Windows 7 (x64 or x86). I do not have this problem with XP (x64 or
x86).
I have several subnets for which I use the HP Procurve IP
HELPER-ADDRESS. This also happens if the DHCP server is a physical
or virtual machine. I was reading about the port fast option for
RSTP (HP), though I can see if I need to use that if it happens with
XP and Windows 7. I tried the following:
* Disabled IPv6
* Tried a physical and virtual machine
* Ran hotfix 2459530 for both x64 and x32
* Tried the Broadcast registry fix instead of using unicast
* Tried updating NIC drivers for both Intel and Broadcom
* Changed the gateway for the DHCP options
* Have GPO for "always wait for network before logon"
* Have GPO for "Startup policy wait time (120 seconds)"
I still run into the issue that some Windows 7 machines will get the
Netlogon 5719 errors on startup. I don't know where to go to next
about this issue?? I'm hoping SP2 will help with this issue.
Is this the only error message or do you have other connectivity
errors, too - like no valid IP-address from dhcp-server, or no dns-name
resolution working?
If this is the only error you get and you are able to logon correctly
and access the domain controller it is only cosmetic and means, that
netlogon was already trying to access the resource before it was
available - but it did sucessfully connect later, when the resouce was
available. If you have other errors as well - please tell us those, too
- to make troubleshooting easier.
Wolfgang

Bootcamp WIndows 7 x64 and Syncmaster 204b external monitor

Hi,
I didn't see a sub-forum for external monitors so I hope the Firmware forum is ok since this seems like a drivers/graphics card issue issue.
The issue I'm having is that Mac OS crashes randomly when I connect my external Samsung Syncmaster 204b monitor to my Macbook Pro when running Windows 7 x64 under Bootcamp. The external monitor turns yellow and the Macbook LCD turns gray and I'm forced to do a hard-reboot. Windows does detect the monitor and I can see it with it's correct name under Windows Display Properties.
Everything works fine when I run the monitor under Mac OS 10.6.4.
I'm running Windows 7 x64 on a mid-2010 Macbook Pro 13". I have all of the latest updates installed for Windows and am using Bootcamp 3.1.
Has anyone encountered a similar issue or have any ideas how this may be resolved?
Thanks, -Scott
Message was edited by: Scott Cullen

Ok, I think this problem has been resolved, so I'll post the solution in case others with the Samsung Syncmaster 204B have the same problem. The answer was erasing the PRAM by holding Option-Command-P-R at boot up (http://support.apple.com/kb/ht1379).
This is what I think happened:
An update in Windows Update is available for the Syncmaster 204B, but wasn't visible when I first connected the Syncmaster. I wasn't able to see the update until I rebooted with the Syncmaster connected (after several crashes). After seeing the update in Windows Update under 'Optional Updates", called "Samsung - Display- 204T/204Ts/204B, Syncmaster Magic CX20Ts(digital)", I installed it, but bootcamp Windows continued to crash randomly after attaching the Syncmaster via both Mini Display Port-to-DVI and Mini Display Port-to-VGA. Sometimes it crashed after a few minutes, sometimes an hour, the same as before I installed the update.
I was convinced that it was a compatibility problem between Windows 7 x64, the Syncmaster 204B and the MacBook Pro 13" Mid-2010 hardware since this problem only happened when booting into bootcamp Windows 7 x64 (everything worked fine in Mac OS), but now that doesn't seem to be the case. I think the update fixed the problem, but after installing the update some of the of the original incompatible display settings remained resident in the Mac's PRAM. Erasing the PRAM cleared these settings and allowed the new updated settings to be loaded instead, fixing the crash issue.
-Scott

Realtek Audio is not working in Windows 8 x64 and 8.1 x64

I bought MSI x79 gd 65 mainboard with 4930K i7 and GTx780 1 week ago.
I downloaded windows 8 and latest bios, chipset and audio drivers: Audio didnt worked. Then i updated 8.1 still not worked.
I tried to dowload windows 7 its worked but not with 8.
Then i downloded 8.1 again and i started to try oldest versions like 2.72 - 2.71 they couldnt help too.
I saw in one forum i was saying "make your realtek driver, windows 7 compatible" I tried and not worked.
I saw another forum "close your nvidia audio" Not worked :(
I saw another forum " Download oldest bios" Not worked
Nearly i tried everything. I dont want to use windows 7. What can i do to fix that latest Realtek audio driver not working. Realtek manager can see my 2+1 sound system when i put the cable also when i test it sound bar moving but no sound. Please help me. I hope i can find solution in there.

Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
>>Clear CMOS<<
Afterwards update the Intel Management Engine Driver in Windows.
Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

Vista x64 and 4GB Issue resolved? nforc

Ok, i have a fatalty card and its in a 2nd computer since i got the popping noises with previos drivers, but now with this new one i have hope ^^
ok my question, has anyone tested the Fatalty (or any other X-Fi) on vista x64 with 4gb+ ram? on an nforce4 board?
i have an ASUS A8N SLi-SE board with 4gb of pc3200 (423 MHz) << i know its nforce4, but i want my 20$ inverstment to work
ps> first post here! im new woot ?
EDIT>> I dont have sli, i just have 8800gt xxx, and no nforce mobo drivers installed...
Thnks in Advance,
Munky
Message Edited by Munkypoo7 on 03-7-2008 05:27 PM

took the plunge, and the freaking drivers...
WORK!!!!!!!
Its amazing! i can play 242 and crysis without any pops! finally my 20$ invesment is back in order!!!!!
maybe since i never installed any nforce drivers it works for me perfectly?
Thank you Creative!!!!!! It took a while but i love my Sound Card!!!

I've just bought and installed PS elements 13 on Windows 7 x64 and it crashes as soon as it's started (1st run)

After what I thought was a legit copy of PS Elements 8 expired tonight after a month, I bought PS Elements 13 and installed it on a Windows 7 Pro x64 machine.
It installed properly, and on first load, it opened the welcome screen, then both Organise and Edit options cause an immediate crash, and everytime since.
Multiple restarts with no difference.
Elements 8 removed, no difference.
Elements 13 removed and reinstalled with no difference.
How can I find out what's wrong and get this fixed ASAP?
That, or somehow purchase a PS Elements 8 licence??

You may have a configuration problem in your network (IP conflict). Are you using DHCP?
There is also the possibility of some problem with the HP App.
You should try posting this problem on the HP printer forums. Try here: ePrint, Print Apps, Mobile Printing, and ePrintCenter

ThinkVantage System Update 4, Windows 7 x64, and LAN repository are failing with T410 laptops

I've been using TVSU/TVUR for a few years and they're excellent tools. Life would be much harder without them.
Recently I acquired some ThinkPad T410's with Windows 7. As usual, I applied an existing Windows 7 image (from a T400), and ran TVSU. Group Policy settings populate the TVSU reg keys with the UNC path to the update repository on my LAN. So far so good.
Now things get weird. TVSU asks for a username and password when first connecting to the repository at \\servername\sharename\path. That shouldn't be necessary - I can browse that path as the logged-in domain user.
No matter what I put in the username/password prompt, whether I hit OK or cancel, TVSU proceeds to scan the directories in \\srvername\sharename\path for relevant updates.
Once it finds 15 updates, I select them. Clicking on the "details" option for any updates brings up an empty window, no text. If I try to download updates, it starts chugging along and quickly finishes, reporting "15 packages did not download".
I don't have this problem with other Win 7 x64 T400's, or other laptops running other OS's. I don't think the repository is corrupt, since other systems can download and install updates.
Where do I go from here?
dcsln

Here's the interesting part, near the end, of the tvsu log on another T410 with the same symptoms after tagging two updates for download, and failing to download both:
Info   2010-08-10 , 07:12:00
   at Tvsu.Engine.Task.Task.Start()
   Message: Executing the StartProcess PackageInstallerProcess
Info   2010-08-10 , 07:12:00
   at Tvsu.Engine.Process.PackageInstallerProcess.ChangeDownloadFailedUpdates(ArrayList list)
   Message: The update Lenovo ThinkVantage Toolbox (64-bit) download failed, the file C:\Program Files (x86)\Lenovo\System Update\session\LTTsetup_60551461x64\ does not exist or the file's CRC is incorrect..
[note: this directory exists]
Info   2010-08-10 , 07:12:00
   at Tvsu.Engine.Process.PackageInstallerProcess.ChangeDownloadFailedUpdates(ArrayList list)
   Message: The update Windows 7 Update Module KB981112 64bit download failed, the file C:\Program Files (x86)\Lenovo\System Update\session\os7011ww_64\ does not exist or the file's CRC is incorrect..
[note: this directory exists. There's a CRC string in the xml file in the listed directory for os7011ww_64.exe, but the .exe isn't there, which might make it fail the CRC.]
Info   2010-08-10 , 07:12:00
   at Tvsu.Engine.Task.Task.Start()
   Message: Executing the PostProcess PackageInstallerProcess
Info   2010-08-10 , 07:12:00
   at Tvsu.Engine.Task.Task.Start()
   Message: The process PackageInstallerProcesshas been finished.
Info   2010-08-10 , 07:12:00
   at Tvsu.Engine.Task.Task.StartExecution()
   Message: PostTask
Info   2010-08-10 , 07:12:00
   at Tvsu.Sdk.SuSdk.InstallUpdates(Update[] updatesInstall, Update[] updatesDefer, downloadingDelegate downDelegate)
   Message: Return install Updates
Info   2010-08-10 , 07:12:00
   at Tvsu.Gui.GUIController.ShowResults()
   Message: Displaying install results...
Info   2010-08-10 , 07:12:00
   at Tvsu.Gui.FlowScreens.Results.AdjustComponent()
   Message: System updated:
   Installed=0
   Not Installed=Tvsu.Beans.Update[]
   Deferred=0
   Download Failed=2
   Hidden=0
Info   2010-08-10 , 07:12:00
   at Tvsu.Gui.MainFrame.SetScreen(String screen, EventHandler[] eh)
   Message: Loading Results screen on Action pane.
Info   2010-08-10 , 07:12:49
   at Tvsu.Gui.GUIController.AskBeforeClosing()
   Message: Close System Update?

Clean Install of Windows 7 x64 and install of iTunes 10.5.2.11

I am having a problem with iTunes in that any time I click on a folder anywhere on my PC labeled iTunes it will launch iTunes. I also can not close iTunes if I have any folder named iTunes opened because iTunes will keep re-launching itself.
This can be reproduced even by creating a new folder on my desktop with nothing in it and labeling it iTunes. Once the folder is created I can click to open it and itunes will launch.
I have tried disabling iTiunes helper in my processes but it will still launch itunes.
I have also completely uninstalled iTunes and all Apple software including bonjur and deleted all remaining folders as well under both app data and my music.
Reinstalling the software yielded the same problem.
Any help on this would be appreciated.

Hmm, I'm not familiar with Process Control. Google showed it to be a Win2K server utility.
Is it part of the SysInternal tools, now named Process Monitor?
If this is a new setup with not much else on the PC, you're right - it might be faster to just reinstall W7. But, it was a clean install before and this happened -- so it might do the same thing. Yikes.
Had a look at task manager > process tab again. In the Command Line column there are only a few programs that have this -Embedding switch. Flash, Windows Live email & WMP. Not sure where they are getting it from, as a registry search on "embedding" yielded nothing.
This vaguely reminds me of an old problem where itunes would take over all the PC icons
https://discussions.apple.com/thread/2397675?start=0&tstart=0
but not exactly, itunes is starting in your case and not taking over all your desktop icons. The fix for that I think, was to restore file associations as described here
http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restor e.html
It working OK in safe mode is probably a huge clue, but nothing comes to mind as to why.
Did you try installing from a different windows admin user account? Did that do anything different?
Well, if you reinstall windows, remember to deauthorize itunes before you do it.

In need of a soundcard - windows xp x64 and 4gb

Similar Messages

Maybe you are looking for