In need of putting lyrics over video..

I posted a discussion yesterday, and I need to know pronto this is for a friend's assignment that is due Monday...I need to be able to put lyrics at the bottom over video, I've tried doing this with titles but it won't let me put them for short enough and close enough together so I can have a continuation of lyrics (that obviously change/not the same words over and over) throughout the whole video,
any help would be very much appreciated!! I'm using imovie '08.

Then, if I look on comments on the Apple website, some people say it does work on older models, some say it does not because this card requires PCI Express 2.0??
The card is PCI Express 2. Your Mac Pro has just standard PCI Express. However, that doesn't matter , since PCI Express 2 was designed to be compatible with standard PCI Express. Any PCI Express card (2.0 or not) can be used in any PCI Express slot (2.0 or not). Of course you only get 2.0 speed if the card and slot are both 2.0.
PCI slot 1 (the lower slot) in your Mac Pro is a 16x slot, and will provide plenty of speed for the card. It is unlikely that an older Mac Pro could send data any faster than that slot could handle. The new Mac Pros have faster memory, and might be able to use the extra speed of PCI Express 2.0.

Similar Messages

  • I need help figuring out how to put pics over video

    How do I put pictures over video while keeping the audio from the video? I am using Premiere Elements 9.

    Do you want the pictures to fill your video frame or do you want them smaller than the video frame so that the video shows behind them?
    Have a look at my sample "Add Motion Behind Your Slideshow" sample and see if that's what you're trying to do.
    http://muvipix.com/cooltricks.php
    In any event, you put the video on one video track and the photos on a track above it, basically.
    There's much more to explain, but before we get too deeply into that, we need to know exactly what you're trying to do. Can you link us to a YouTube video example?

  • Trouble putting layers over video plugin

    I'm using Dreamweaver 8 for mac.
    I have my video plugin in a table z layer 2. I set the
    parameters for the .m4v file set to wmode = transparent.
    I'm attempting to put a gif to make a permanent headline on
    top of the video. This is layer 1 z layer 1. When I go to preview
    this in firefox or safari, the video plugin is always on top. What
    am I doing wrong?

    All Active content on a page will always rise to the top, so
    to speak,
    including Flash, certain form elements, Java applets, and
    Active X controls.
    This means that each of these will poke through layers. There
    is not a good
    cross-browser/platform reliable way to solve this issue, but
    if you can be
    confident in your visitors using IE 5+ or NN6+, then you can
    use the Flash
    wmode parameter (however, Safari does not support this
    properly!).
    Adobe articles:
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15523
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14201
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "walleye49" <[email protected]> wrote in
    message
    news:[email protected]...
    > I'm using Dreamweaver 8 for mac.
    >
    > I have my video plugin in a table z layer 2. I set the
    parameters for the
    > .m4v file set to wmode = transparent.
    >
    > I'm attempting to put a gif to make a permanent headline
    on top of the
    > video.
    > This is layer 1 z layer 1. When I go to preview this in
    firefox or
    > safari, the
    > video plugin is always on top. What am I doing wrong?
    >
    >
    >
    >
    > #Layer1 {
    > position:absolute;
    > left:147px;
    > top:99px;
    > width:803px;
    > height:105px;
    > z-index:1;
    > visibility: visible;
    > }
    > #Layer2 {
    > position:absolute;
    > left:10px;
    > top:27px;
    > width:800px;
    > height:131px;
    > z-index:2;
    > visibility: visible;
    > }
    > #Layer3 {
    > position:absolute;
    > left:11px;
    > top:322px;
    > width:151px;
    > height:125px;
    > z-index:3;
    > }
    > .style6 {font-size: 12px; font-family: Arial, Helvetica,
    sans-serif; }
    > .style8 {font-weight: bold; font-family: Arial,
    Helvetica, sans-serif;}
    > .style1 {color: #000000}
    > .style10 {color: #0000FF}
    > .style11 {color: #FF0000}
    > .style12 {color: #FFFF00}
    > .style13 {color: #00FF00}
    > .style15 {color: #FFFFFF}
    > .style3 {color: #0066CC}
    > #Layer4 {
    > position:absolute;
    > left:11px;
    > top:-1px;
    > width:139px;
    > height:86px;
    > z-index:1;
    > }
    > -->
    > </style>
    > </head>
    >
    > <body>
    > <div id="Layer2">
    > <table width="800" border="0">
    > <tr>
    > <td width="640"><embed
    >
    src="web-content/flash/videopodcasts/1MyBlue-desktop.m4v"
    width="640"
    > height="496"
    wmode="transparent"></embed></td>
    > <td width="156"><h3 align="center"
    class="style8">Testimonials</h3>
    > <p class="style6">I highly recommend the services
    of All About
    > Insurance. As a new business owner I was quite concerned
    about the high
    > cost
    > of health insurance. After meeting with Craig and going
    through the many
    > options available. I was pleasantly surprised with the
    HSA plan he
    > discovered
    > for me and my family. Thanks Craig. </p>
    > <p class="style6"><strong>Tony Rubleski -
    President Mind Capture
    > Group,
    > Spring Lake MI</strong></p></td>
    > </tr>
    > <tr>
    > <td colspan="2"><iframe
    > src="
    http://prospectzone.com/quote/start.jsp?login=walleye49"
    > frameborder="no"
    > width="800 " height="700" hspace="0"
    vspace="0"></iframe></td>
    > </tr>
    > <tr>
    > <td> </td>
    > <td> </td>
    > </tr>
    > </table>
    > </div>
    > <div id="Layer4"><img
    src="web-content/images/covermihead.gif" alt="you
    > searched for myblue on google" width="815" height="143"
    /></div>
    > </body>
    >
    > </html>
    >

  • Hi!I have an image which is a drawing of black lines and i need to put it over a picture without loosing definition in both of them,like the drawing and the picture are one.How can i do that?can someone help me please?I do work with CS6.Thanks!

    Photoshop General Discussion

    Why has nobody suggested the "Blend If" solution yet?
    - double-click on the layer thumbnail of the dragon line art
    - Hold down <Alt> and drag the left half of the "This Layer" slider to the left, and the right slider as well, but not as much for a nicer blending.
    Done. The only trouble is that you cannot add (for example) a color overlay effect to recolour the lines directly because this layer is not considered truly transparent by Photoshop (in Photoline this is not an issue luckily). In Photoshop's case you will have to merge it to a new layer, and only then does Photoshop treat the transparent pixels as "real" transparent ones. Some tips to do that can be found here: Create A Composite Layer | Planet Photoshop
    Alternatively, convert the layer to a smart object, and you can apply layer effects and the like without issues. I would choose the latter option, since it is non-destructive.
    This method, however, does not take the pre-multiplied edge pixels into account (which are multiplied with white), and thus you lose those pixels. This may be an undesired side effect, especially for more delicate art work. A better approach is to use an "unmultiply" effect.
    In Photoline a non-destructive adjustment layer will allow us to do exactly this with any background colour, and with additional controls as well. Unfortunately, such a filter is unavailable in Photoshop. Luckily enough an action for Photoshop is available: http://www.ayatoweb.com/download/down04.html
    - download the action (zip file) and load up the actions in Photoshop (I have no idea if this action still works in CC and above - I own a license of CS6 only).
    - since this will unmultiply BLACK, you must first invert the artwork with <CTRL> <i>.
    - run the action "unmultiply English".
    - The black background is removed, and you now invert the artwork back to its original black.
    Done! Notice how all of the original edge pixels remained unaffected. Those are now truly semi-transparent, and blend nicely with the background layer(s). A bit of a shame this is a destructive workflow, but the result is great.

  • Quicktime Movies pretty much useless if you want to put text over them

    Bummer. Was hoping there would be much improvement in playing QT movies (especially H.264 movies) within KN3 when using animations or text overlays. This rocks in PPT and in MediaShout - seems simple to do. Anyway, if you put text over a movie and want it to fade in and out, the movie pauses for just a second which makes it look silly. Any ideas how to make this run smoothly. We are constantly wanting to put lyrics over songs that vocalists can follow with bg video playing.

    I do know NOT using the presenter display will help as it's bogging down the processor when movies are playing. Hopefully MediaShout for mac will be out sometime in the next few months and you can use that

  • Buttons Over Video In A Menu?

    Hi,
    I created a 40-second motion menu (Menu 1 in the scheme of things) with a music track. I will put "Play Movie" and "Scene Selection" buttons in this menu, but I want to them to appear about 15 seconds after the menu starts playing. Is there a way to do this? I know you can put buttons over video for the main video track at any time, but how about a looping menu?
    TIA,
    James

    What I did was add my short intro video to the end of my main video track (V1) in the Track Editor, and add a chapter marker between them. Then I set the First Play setting of the disk to that chapter marker. Then I set the disk's End Jump setting to Menu 1 (my main menu with highlighted navigation buttons). This was pretty simple to do and it looks seamless during simulation.
    So, the disk will play the intro video first, then jump to to the main menu.

  • Putting Text over a video is not working

    O.K.  I follow the instructions on putting text over a video (for iMovie 11), but every time I do this all I see is a black screen with the text in it.  I can't get the video to show up when I preview/play the video.  I have the same problem when trying to use the green screen feature as well.  Is there a setting or something that I need to change in iMovie?  If so what/where is it, because I am at my "witts end" trying to find it?

    I would suggest trashing the iMovie Preferences file. Instructions are here. (You should not need to trash the iApps preferences, just the iMovie one.)
    https://discussions.apple.com/docs/DOC-4061

  • What adapter/converter do I need to put GoPro videos onto iPad

    What adapter/converter do I need to put GoPro videos from my iMac to my iPad?

    What file type are the videos? If you have converted them to GoPro video format, iMovie should be able to convert the video to a format that con be used by the iPad.
    H.264 videos output by the camera may be able to be used by the iPad by directly importing them from the camera to the iPad with Apple's Camera Connection Kit.

  • What do I need to enable me to put JVC Everio video onto the MacbookPro Snow Leopard bought November2009

    Hello to all,
    I am still learning how to use this Macbook Pro and cannot understand why there is no app for
    putting JVC Everio video onto my laptop in order to edit and make a disc of my films while on
    holiday so that I can send the edited pieces to our daughter in New Zealand where we took them.
    I have been into the Apple Store in San Fransisco this month and they could not help as the
    laptop was then at home in the UK.
    Are there any apps?
    Do I need to buy a reader I have been told by a salesman?
    Should I update the Snow Leopard to Lion?
    Should I consider any updrade to the Macbook Pro?
    Do I need to consider going back to school at age 64 tomix with 5 year olds who seem to understand
    computers better than us old grumpies!!!
    Is there a site or disc which can take me through any possible remedy to my problems?
    Any help will be appreciated especially from people who know what they are talking about.
    Thank you
    atlantisbird

    MacBook Pro and Mac Pro are not the same machine.   The MacBook Pro is a notebook, and the Mac Pro is a desktop.   Regardless, the question you have pertains more to Quicktime or iMovie, as both those are video importing applications.     Do you wish me to ask a moderator to redirect your question to either forum?
    There are forums for each.
    One application I found is great for importing non-Apple compatible video formats is http://www.etinysoft.com/total-video-converter-hd.html though you may need to get a Flash Card reader that supports your camera's flash card on a Mac to import the video.

  • Bought an iPad. I put in wrong email as Id. I tried erase but can't get in to my account. I need to completely start over. All I see is instructions to change my password.

    I'm trying to start over. Typed wrong id ( not my email). Now I have a new id but can't change my iCloud account. I need to just start over from scratch but it won't let me do so. When it sends verification it is sending it to a nonexistent email.

    Sggest you setup as new and make sure you get the Apple ID correct. Use new Apple ID.
    Settings>General>Reset>Erase all content and settings

  • I'm using movie program how do get rid of background noise and put music over top of video

    I'm using movie program how do get rid of background noise and put music over top of video

    Niel,
    Thanks for your suggestion about using RCDefaultApp. I am hesitating to do this because it seems like I'd be installing still another piece of software to fix the original mistake---downloading Reader.
    About 20 years ago I maintained---with considerable handholding---UNIX systems of various sorts. Can you suggest how I might find the plist that seems to require changing?
    BTW, Preview is called whenever I open some random .pdf file. The problem appears when I want to get a file from the web. If the site permits a "download" I can get the file, but if I want to "view and print" the file, the evil dark-grey Adobe screen appears with the whirling black ball. Then Safari quits. I'm wondering if the reference to Reader is in a "cookie" sent from the website, when I first was installing Reader. Is this possible?

  • Drag and drop photos over video in imovie 08 - need help

    my video format is widescreen but when I drag and drop 800x600 pixel photos (actually jpeg slides) over video, imovie adjust the photos by zooming in cropping out the top of bottom of the photos. I have not been able to find any way to change this within imovie. I'd rather not redo all the slides in a widescreen format. Does anyone know a work around or a setting that I'm just overlooking?

    you're most welcome, Jon, and it's this board, which 'animates' me to do it that way and this way, and find out the differences..
    but, indeed: the 'settings' of a photo should be 'accessible' in both ways..
    ' cause, in MY workflow in iMHD6 or FCE, I FIRST import the video, and more important: the audio-track, which I 'spice up' with additional footage, as stills...
    .. but I've never done that in iM08, which is for my projects still in 'experimental use'...- (I LOVE those picture settings, de-saturating clips etc....), I get used to the many audio-layers in FCE ...
    ... and: lately, tought some iMovie-beginners (a photographer and a print-designer), with zil background knowledge of any iMovie version, the first steps with iM08... they want to use it to 'glue' some impressions together, they shoot while doing their photo-jobs.. and they were very impressed and excited!... +sooooo easy+ ... yepp, the User Experience IS breathtaking, awesome, groundbraking

  • DESPARATE NEED OF HELP - Changing Angles via "Invisible" Buttons over Video

    Hello,
    I'm new to this forum, and glad to be here.
    I'm going nuts. I'm trying to author a DVD with 3 angles in DSP4.
    My first test of the DVD worked just fine before I added the buttons over video. I was able to switch angles successfully by hitting the angle button.
    But because so many users are using universal remotes, and some dvd players do not have angle buttons, , my client is requiring angles to change on the fly by either pressing the enter button to cycle through them, or the directional button. Up being main angle, left, alternate A, and right alternate B. I went with the latter.
    When I test the dvd in simulator, my buttons over video work fine. Also success when testing with Apple DVD player.
    But here's the rub. . .
    On set top players I am only able to make one change of angle per marker, and also I am unable to pause,fast forward, or review.
    It seems that when the button highlight is ticked, all playback functions are disabled. (Only on set tops, the apple software DVD player will sill pause, and ff, etc)
    Now when I test burn again with out button highlight, I am able to use playback functions.
    Is there another way I can accomplish this with out buttons over video?
    I know of DVDs that change angle with the enter button, but I hoping like h_ll that it's not something that's only available to Scenarist users. Of course, I'm a mac head.
    Thanks in advance,
    Desparately seeking solutions,
    Mickey
    powerbook g4 Mac OS X (10.3.7)

    Not so! Several titles use the enter button to change
    angles, but I know that these were authored with
    Scenarist.
    Not so! If you can use the "Enter/Play" button on the remote to change angles, you are activating a button onscreen (or an invisible one) to perform that action -- you aren't changing angles directly with that remote button. The DVD spec is the DVD spec, regardless of which authoring app was used.
    Through my research I found out that the BBC wrote a custom
    program to insert new invisible buttons every two
    seconds, but a least I have a solution, albeit a time
    consuming one, and that's make a highlight marker
    every two seconds and paste my auto-action buttons in
    there....every two seconds....
    but at least it works.
    You should know that every other marker actually DEactivates buttons over video, and even replacing them every two seconds doesn't rescue you from the FF problem, it just means they'll re-appear within two seconds after the FF operation stops. Also, the BBC didn't "write a custom program" -- they did the same thing you're doing. If you fast-forward through a program and subtitles reappear immediately after you stop, it just means there was a new subtitle marker right after you resumed play. When you do that, you'll always get the next subtitle when play starts again. If you still see buttons during the FF operation, they are burned onto the video, not part of a subtitle stream.
    Please dispense with the idea that there are "programs" on a DVD that might do things DVD Studio Pro won't let you do. The only thing on a DVD other than video is the occasional rudimentary script, but even scripts can't be executed while video is being played.
    Contrary to the operation of HD-DVD and Blu-ray, standard DVD players have no real RAM (just on/off registers for variables) and no operating system to speak of. It's always playing video, whether it looks like an actual interactive app or not. DVD players don't run programs, they are simply able to show still images and accept input, there is no actual software being run.

  • HT5731 I need o remove a film that will not complete it's download on my model and it's putting me over my usage.

    I seem to be stuck with a film download.the life of pi does not complete it's download so is putting me over my allowance and costing me money. All I want to do is erase it from my I pad but cannot find how to remove it.
    Colin

    Check if it is here:
    Settings>General>Usage>Storage>Videos

  • How do I delete a low title that I place over video file?

    I was using a Low title for my video and I placed over the top of the original clip and I dont know how to remove it. I wanted it to show the video behind it but i found out that you have to place it on top on another video file. SO Now I try to remove it and it will remove the clip too. What do I do.

    I agree with Harm that you need to study the manual and get some tutorials. A great place for learning the ropes  is http://tv.adobe.com/
    Back to your problem, I think I can guess how you got into a mess if you placed the title directly onto your clip. Normally you would just use the undo button, but it is probably too late for that.
    Now that you know that you need to put the title on the video track above the clip, I think it is best if you simple start again by reinserting your video clip onto track one and then place your title onto track 2. This may mean redoing some of the work you have done, but most of us, unfortunately, learn through our mistakes. Or is that just me?

Maybe you are looking for