In need of some help :( p55 big bang fuzion will not post

For some reason my system will not post. i switch my system on and  everything on the board lights up all the drives spin up, gpu spins up, but it will still not post iv checked the gpu and it dose work fine, iv checked the ram to find out that one of my ram sticks has gone. iv tired booting with the stick that works with no luck neither.
would really like some advice please
My Current System is : i7  875k [email protected] GHz,on OC Genie- - P55 Big Bang-Fuzion (MS-7582)- -BIOS v1.5 --CORSAIR CMT4GX3M2A2133C9 4GB 2133MHz, 9-10-9-27, 1.65V, with Intel XMP -- NSI R5850 Twin Frozr II-- Real Power M520, with two WD Caviar Black 500 GB SATA Hard Drives ( WD5001AALS) in Raid 0

like Xmad said get a good 600W PSU from a trusted manufacturer of a single +12V kind. split rails are only good when there very high ampage ones (over 30A per rail) and the single rail ones are a better pick all-round!
and like Xmad also pointed out id also recomend a Corsair or seatronic unit of 600W or more!
it doesn't matter how the power went out as any thing that pulls over the load a PSU can supply will fead back and cause damage to the PSU itself!
alot of PSU makers cannot be trusted much as they put lables on the psu that are no where neer the real units performance level as they use a bench version that have uprated VRM's and bigger heatsinks and high end refrigerated coolers to stop them overloading thats totally un-realistic!

Similar Messages

  • Help - Yoga Pro 3 Apps Will Not Open

    I am looking for some help troubleshooting why my apps will not work.
    I click on an app, the app begins to initialize, but then immediately closes. I am then sent back to the windows start screen. Any app I attempted to open will show up in the task manager side bar, but the apps will still not open if clicked from the sidebar.
    Any help would be appreciated!

    While doing a clean install may be the final solution know that you have to visit multiple locations on your drive to "properly' remove DVDSP. There is a technote on this topic. An incomplete removal only seems to complicate things.
    Create a new account as Hal has suggested and see what happens. If it does not work focus on getting the current DVDSP off the drive(leaving other pro apps in place), ditch preferences, and fix permissions.
    Using both accounts do a random check of the remianing apps to make sure there is not a complex issue happing on your drive.
    Reinstall DVDSP but open the app (not your project) first in the new account. If all si well then do the same for your account.
    If all remains well then open your project. If it works then you are gold; if it doesn't at least you have knowledge that something within your project is off balance.
    OT: This is one of those "dark arts" ideas that seems logical to me but has no practical justification. With DVDSP off take your project folder and move it to the Public folder. Then fire up DVDSP and open the project. You'll get the broken links message so point to the new location and let the links rebuild. This task might fix things behind the scenes.

  • In need of some help!! my iphone 4s is not letting me take pictures or videos or even use the flashlight, does anyone know what to do??

    In need of some help!! my iphone 4s is not letting me take pictures or videos or even use the flashlight, does anyone know what to do??

    Hello Albert3232,
    It sounds like you cannot use either camera, nor the LED as a camera. I want to recommend a couple of things here.
    First, close all the open and running apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the phone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, I would next backup your device to iTunes, and restore it:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

    Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got  extra money to spend..

    Just what happens when the restore does not complete?
    Error message?
    Does it freeze? Is so what is listed in the status bar of iTunes?

  • MSI Big Bang Fuzion - DirectX 11

    Got a question about the new motherboard MSI Big Bang Fuzion, is there any plans on creating support for DirectX 11?

    This question will not be answered here unless MSI has an official announcement. You can directly contact MSI if you are really keen to find out.
    >>How to contact MSI.<<

  • I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so

    I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so. And when i go online to log into my apple id account it states that there is an error. Can someone help me solve this issue, its annoying me?

    Apple’s having trouble with the iTunes Store servers right now. Wait for them to resolve the issue.
    (123935)

  • I got a message that it needs to upgrade my library, once upgraded, i will not be able to use this library. Will I lose all my photos?

    I got a message that Aperture needs to upgrade my library, once upgraded, I will not be able to use this library. Will I lose all my photos? Please help!

    I got a message that Aperture needs to upgrade my library, once upgraded, I will not be able to use this library.
    Photogirl, that surely is only half of the alert message. You will not lose your photos; this message is alerting  you to the fact, that there will be no way back. Once the library has been upgraded, you will no longer be able to open it in the previous Aperture version. So, if you have other macs with older Aperture versions, these will no longer be able to read your converted Aperture library.
    When you see an alert like this, it is always wise to check, if your backup is current, before you proceed. Make sure, you have a working backup of your Aperture library, and also, of your current version of Aperture, just in case.
    Regards
    Léonie

  • ? Some pdf files from the web will not open, some will.

    Some pdf files from the web will not open, some will. I am using Adobe Reader 10.0.1 on an 8-year old puter I have just upgraded to 2G of RAM. It worked fine before with 256K. When a file won't open I get error message "There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again (103:103). Have uninstalled and reinstalled all Adobe products several times. Ideas?

    Good luck with that. Adobe10.0.1 is a bug infested BAD program. Look at the posts relating to this issue for the last 3 days. Many, many problems. Support is no help.

  • I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer.?

    I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer in case it wipes everything .

    I have the exact same problem. I have not changed anything. This is probably a bug or something that has gone bad with Mac OS X (10.7.2). I have not found any solution for this on the web.
    MacBook Pro, Mac OS X (10.7.2).

  • Please help. My facebook app will not open on my iphone 4. I deleted it,numerous times and downloaded it again. It uploads, but when you click on the icon, it flickers then closes.  Help.

    Please help. My facebook app will not open on my iphone 4. I deleted it,numerous times and downloaded it again. It uploads, but when you click on the icon, it flickers then closes.
    Help.

    Then the next step would be to restore your phone.  My advice is that prior to restoring you import your photos and videos to your computer and back up your contacts (by syncing them with iCloud or to a supported program on your computer using iTunes) as a number of users report losing these when restoring their device.

  • Some images saved in Photoshop CS will not open in Photoshop 6

    We have confirmed that some files saved from Photoshop CS will not open in Photoshop 6. This is due to a bug in Photoshop 6, not in CS.
    These files open correctly in Photoshop 3, 4, 5, 5.5, 7 and CS on both platforms.
    The solution is to upgrade the copies of Photoshop 6 to Photoshop CS.

    Hi sig,
    I actually did try reinstally Photoshop - even reinstalled my operating system. I looked for the file "Adobe Unit Types" and see that it is indeed there in the ScriptingAdditions folder. But I still cannot open the tif files.
    I should also mention all my tif files have the .tif extension on them (in case anyone suggests that's the issue.)
    And, this problem is the same with Illustrator CS .ai files as well.
    Any other ideas?
    Thanks.

  • For some inexplicable reason, Safari 5.1 will not open in Windows 7. It appears in task manager briefly and then disappears. No windows open; I have tried everything. Any ideas??

    For some inexplicable reason, Safari 5.1 will not open in Windows 7. It appears in task manager briefly and then disappears. No windows open; I have tried everything. Any ideas??

    I fixed the issue. It was related to the DEP settings on my windows machine.

  • Help!! CD/Dvd will not burn

    Can someone help? Satellite A135-S4527 will not burn either CD/DVD. I have installed  RmvFltrs Toshiba DVD Rom but it did not help. I'm running vista 32 bit. I can be emailed at [email protected]
    Thank you,
    Marty

    Try downloading and running the imgburn program.  Google it.  It is free and will burn CDs and DVDs.
    This signature left intentionally blank.

  • Mountain Lion won't allow me to save photos from Mail directly to iPhoto (as you could in all other recent OSX).  Tried opening iPhoto and then click/drag each photo onto iPhoto icon on dock (as Help instructed) but the photo will not drag.  Suggestions?

    Mountain Lion won't allow me to save photos from Mail directly to iPhoto (as you could in all other recent OSX).  Tried opening iPhoto and then click/drag each photo onto iPhoto icon on dock (as Help instructed) but the photo will not drag.  Suggestions?

    I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening.
    Be sure you're holding the correct keys and that you're holding them long enough. Depress them before clicking on iPhoto and don't let go until the menu shows up.
    If you don't want to lose those photos, make a back up now. Hopefully it's not too late.

  • Help! My iPad 3 will not auto-rotate!

    Help! My iPad 3 will not auto-rotate to landscape when watching something from YouTube. Please help me fix this.Thanks(:

    Hello:
    I do not watch YouTube on my iPad, but check the setting in settings>general>use side switch to:
    If it is set to "lock rotation," the switch on the side of your iPad is probably set to prevent it.
    Barry

Maybe you are looking for