In need of some SURROUND 5.1 help...

Hello all.
Still on Logic 7. Haven't made the jump.
Wanting to write and monitor in 5.1 for television. Have never done this in Logic. We use Motu 24 i/o boxes. Want to set the digital outs as my 5.1 outs going into Pro Tools on another machine, then have Pro Tools come up on the board in 5.1.
Here's the problem:
The room is set up, but Logic is not. When I go to the Preferences>Audio>Surround page, I cannot select outputs higher than 32. Problem is, my digital outs are 33-48. Is this a limitation in Logic 7? I went to the audio configuration page, and my outs are all available. If I select an instrument or audio track, I can send them out stereo from 33-48, but the preferences>audio>surround page does not allow this.
Any ideas? Am I missing a page somewhere that enables these outs? Is it in the environment?
Any help is GREATLY appreciated on this one. I have been at it for a while without a solution.
Many thanks,
ETMi

Mark Isham wrote:
Hello all.
Still on Logic 7. Haven't made the jump.
Wanting to write and monitor in 5.1 for television. Have never done this in Logic. We use Motu 24 i/o boxes. Want to set the digital outs as my 5.1 outs going into Pro Tools on another machine, then have Pro Tools come up on the board in 5.1.
Here's the problem:
The room is set up, but Logic is not. When I go to the Preferences>Audio>Surround page, I cannot select outputs higher than 32. Problem is, my digital outs are 33-48. Is this a limitation in Logic 7? I went to the audio configuration page, and my outs are all available. If I select an instrument or audio track, I can send them out stereo from 33-48, but the preferences>audio>surround page does not allow this.
Any ideas? Am I missing a page somewhere that enables these outs? Is it in the environment?
Any help is GREATLY appreciated on this one. I have been at it for a while without a solution.
Many thanks,
ETMi
Hi Mark,
Make sure your outputs in the Motu setup are all active all the way to channels 48.
Otherwise, I suggest you conform to the standard that most other studios use, and use outputs 1-8 as your main outputs.
Output 1-6 can be the surround, and 7+8 can be a stereo output.
That is, if you cannot get the digital outputs to work.
Cheers

Similar Messages

Finding difficulty in using Acrobat Editor, need some tutorials or online help in editing pdf's

finding difficulty in using Acrobat Editor, need some tutorials or online help in editing pdf's

Press F1 within the application to open the Help section.
If you have specific questions ask them in the Acrobat forums (this is the Reader forum).

I have misplaced my iPod Touch 4th Generation. According to Find my iPhone, it should show up in offline mode. I need help on locating it with a software or some other way. Help?

I have misplaced my iPod Touch 4th Generation. According to Find my iPhone, it should show up in offline mode. I need help on locating it with a software or some other way. Help?

There is no other way.
Sorry

In need of some help!! my iphone 4s is not letting me take pictures or videos or even use the flashlight, does anyone know what to do??

In need of some help!! my iphone 4s is not letting me take pictures or videos or even use the flashlight, does anyone know what to do??

Hello Albert3232,
It sounds like you cannot use either camera, nor the LED as a camera. I want to recommend a couple of things here.
First, close all the open and running apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
All the best,
Sterling

PLEASE HELP ME. Some important emails have gone to an archive mail box and i really need them. Can someone please help me with how to view the archive email box and the emails that are in there?

PLEASE HELP ME. Some important emails have gone to an archive mail box and i really need them. Can someone please help me with how to view the archive email box and the emails that are in there?

http://kb.mozillazine.org/Recovering_deleted_mail_accounts

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

you can link
OOH.invoice_to_org_id=CUST.cust_account_id   -- invoice customer
OOH.sold_to_org_id=CUST.cust_account_id   -- sold to customer
OOH.ship_to_org_id=CUST.cust_account_id   -- ship to customer

Questions you need to answer to receive better help

Questions you need to answer to receive better help... please answer as much as you can, that relates to your problem, back in your original message
If a program is not showing on the Cloud screen, it is most likely because your computer does not meet the specifications
FOR EXAMPLE, Premiere Pro requires a 64bit computer - Not all apps displayed for download | Creative Cloud desktop app, Adobe Application Manager
What error message do you see, or what is the screen you see that does not work? (examples... a BLANK login screen, or a spinning wheel)
A screen shot works well to SHOW people what you are doing - http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Are you using Windows or Mac, and exactly which version? (include "dot" numbers like Windows 8.1 or Mac 10.9.3)
Which brand and version web browser are you using... and have you tried a different web browser?
What Firewall do you use, and have you tried turning it off to download?
What anti-virus do you use, and have you tried turning it off to download?
Has this ever worked before? If yes, do you recall any changes you made to the program, such as adding Plug-ins, etc.?
Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs since this last worked?
Are you using an account with Administrator Privileges? Run as Administrator will sometimes help (this EXAMPLE http://forums.adobe.com/thread/969395 is for Encore + "All" Premiere)
What were you doing when the problem occurred?
What other software are you running?
Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
Hardware Blue Screen shutdowns http://forums.adobe.com/thread/1427408?tstart=0
For Windows, do NOT rely on Windows Update to have current driver information
(you need to go direct to the vendor web site and check updates for yourself)
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Do you have dual graphics adapters? (common in many "energy saving" laptops)
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-and a Mac Utility http://forums.adobe.com/thread/1017891?tstart=0
JUST FOR MAC USERS
Next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-Mac 10.9.3 and CS6 https://forums.adobe.com/thread/1480238
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0
Case sensitive hard drive
-http://helpx.adobe.com/creative-suite/kb/error-case-sensitive-drives-supported.html
Troubleshooting guide for Mac freeze
-http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
Some links concerning error codes
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
A12... download & install error http://forums.adobe.com/thread/1289484
-more A12... discussion http://forums.adobe.com/thread/1045283?tstart=0
U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html
Repeated updates http://helpx.adobe.com/creative-cloud/kb/updates-repeatedly-applied-cc.html
Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Error 16 http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
-including DW039 https://forums.adobe.com/thread/1500609
Error 49 https://forums.adobe.com/thread/1491394
Error 50 https://forums.adobe.com/thread/1432237
Errors 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
Muse error http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html
InDeisgn error http://helpx.adobe.com/indesign/kb/indesign-cc-crashing-launch.html
Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
-and 'looping' https://forums.adobe.com/thread/1504792
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430

Does anyone know if there's a way to change the questions themselves? (Frankly, they have to be the most ridiculous security questions I've ever seen. A good security question should be one that you'll have no problem remembering the answer to, even if you're asked years later. To answer one from the third batch, I'd have to make something up, which makes it unlikely I'll remember the answer later. And I certainly don't want to have to write the answers down somewhere.)

How can I speak to some one that can help at Apple

I am greatly in need of some help.
A little over one year ago I purchased a black Iphone 5 16GB phone which was brand new out on the market at the time. It was the first time I had invested in the Iphone brand, it unfortunately didn't take long for a software fault to develop to my disappointment. I live more than 80 miles to the nearest Apple store but made the journey by train anyway to see if I could get it fixed.
I left my phone at the shop for half an hour but sadly it couldn't be fixed and a new phone was handed to me which was bitter sweet, great that the problem had been resolved but I lost all of my things on the phone. Although I can't not knock the Apple customer care, it was great.
The replacement phone lasted not long before again a software fault developed much to my amazement I made the journey again. It was at this time I realised that a warranty doesn't extend even when you get a completely new phone which could have a whole new set of problems.
Over all my phone as been replaced three times due to faults which couldn't be fixed in the software of the phone, I am now at a point where my phone again is showing signs of a fault in that when the screen is touched it doesn't always give a response, the phone also 'blacks out'. Not only that but there is a purple dot on my camera when taking photographs. However my warranty is now at an end even though I have only had this handset for two months.
I am really disappointed with this and left wondering if I am the unluckiest person ever or if there is in fact a problem with the Iphone 5 and that is why it was on the market for such a short time?
This is all really unfair!
Best wishes
Kirsty Wilde

Not sure if you are asking how to obtain the Pandora app on the new phone? If so, the following has information for a variety of phone types including an iPhone: http://www.pandora.com/everywhere/mobile

I need a MacBook experts, master to help me!!! I just tried the craziest move on my mac! My dad's gonna kill me if he finds out!!!

I need a MacBook experts, master to help me!!! I just tried the craziest series of moves on my mac.
Begun when the mac hung for nearly an hour. I held the power key to force a shut off.
This made me think of erasing some things on my hard drive. I used cmd r for disk utility and begun erasing volumes.
Then, I thought instead, why not just reinstall OSX since nothing I wanted was on it.
I tried to reinstall OSX but this time it loaded then suddenly said, an error occurred.
I Went back to disk utility and cleared stuff I can't even remember.
Another unbelievable thing happened. The disk utility actually hung for a good ten minutes! i went and forced a shut off again.
Now, whenever I turn the mac on, a flashing folder appears.
at this point, I usually turn to the net for answers.
Greatest thing is, every cmd something I try doesn't even trigger a reaction. Only cmd opt showed my mouse cursor.
i Do not have the original OSX install disk for my mac. Any geniuses got any clues???

Your post somehow found its way to a low-traffic forum about technical issues with posting in Apple Support Communities. I have asked the Hosts to move you to a more appropriate hardware forum for your product.

My friend set up my itunes account and they have forgotten the secret question and i need it for something on itunes HELP!!!

my friend set up my itunes account and they have forgotten the secret question and i need it for something on itunes HELP!!!

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

I need know some values

Hy:
At this moment I developer one agent with Solstice Enterprise agents, and when I check the generated code I see some functions get and set, but I don't see how can I need do? for I can know the OID value in this function (get or set) , the name of the variable, etc, because I need this values for an other activities on my application.
If you know How do I need do, I will appreciate your help.
Regards
Lucero

Ecck... error was mine
pl/sql code is compiling something without a problem...
declare
width number := 0 ;
begin
width := get_window_property('bla', width) ;
end ;
took me awhile since I was getting no errors...

Can anyone tell me how to get rid of tlb search? it unfortunately entered into my mac. Whenever I use safari, a pop-up window opens with some ads. Please help me to find a way to remove this malware.

Can anyone tell me how to get rid of tlb search? It unfortunately entered into my mac. Whenever I use safari, a pop-up window opens with some ads. Please help me to find a way to remove this malware.

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Need advice for free app to help MS sufferers

Good afternoon all
I have just registered on the forum to ask one questions and thank you in advance for taking the time to read it !
I have been doing some voluntary work to help MS sufferers track their food intake in order to isolate triggers for symptoms in the hope of improving their quality of life.
Basically some users have been using crude excel spreadsheets through documents to go and transfering the data manually and my mission is to save some time in that process.
Ideally I would like Combo Boxes on the Documents to Go spreadsheets although they are unsupported.
Therefore I would like some help to find an alternative solution for a very basic data entry system which is offline and can be transferred to our Access analysis database periodically. I understand there are live equivalents which use the mobile internet connection to hit an access database stored somewhere else, although because of data plan costs and the relative simplicity of the data being entered we would ideally like an offline system.
There are only 10 columns for data entry, 2 of which need to combo box / Id concept.
Any ideas?
Thank you!
Damian

Hello,
maybe you can look at task management applications.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Need a basic surround mixing program

i need a basic surround mixing program. i need help FAST....thanks

the most basic is in included in compressor.
go to File Menu . . Import Surround Sound Group. and pick a different file for each spearker,
then choose Dolby 5.1 as the setting (in the audio formats folder)
haven't used it so good luck!

Need to restrict values in F4 help for Batch Characteristic

Hi,
I need to restrict values in F4 Help for a batch characteristic based on values entered for another characteristic. I could not find any BADI or Exit for this purpose. There is a BADI CACL_VALUE which is triggered after an entry is selected from dropdown list but nothing when we press F4. I thought of using Object Dependency but I need to write a programming logic for the requirement. Please let me know if there is any way to write program in Object Dependency or any other way for this requirement.
Regards,
Nikhil

Hi nikhil simha,
first of all, find out which search help is called.
[Hierarchy of the Search Help Call|http://help.sap.com/saphelp_nw70/helpdata/en/0b/32e9b798da11d295b800a0c929b3c3/frameset.htm]
may help you.
If you know the search help, you may enhance it, but first of all you should check the where-used-list and make sure that the search help shows the requested behavior only in the context where you want it to.
If it is your own program, you may be better off to create your own search help and define the triggering fields as search help interface input fields. Then you can use the values to filter results.
Regards
Clemens

In need of some SURROUND 5.1 help...

Similar Messages

Maybe you are looking for