In numbers, can i hide rows of data in a chart and still have that data show up in my graph?

yes.
To hide rows (or columns), select the rows (or columns), then right click in the row (or column) tab to expose the contextual menu. Select the menu item "Hide ..."

Similar Messages

Can I move my folder from the C drive and still have ITunes work??

I use ITunes and its playback library program ( version 9.1)., and I have a quick question that I need answered.
My MP3's are located on another partition of my Hard drives ( F drive), and these mp3's are then allowed to play back(copied to) and be sorted etc etc on my ITunes program which is located on my C: Drive.
I did some sorting and relocating (within the ITunes application 'juke box' itself) this morning and have now discovered my C drive is under 4GB in size now., and my F drive still has well over 80 GB available. Can I transfer over my C:\Documents and settings\my name\My Documents\My Music\ITunes\Tunes music\xxxxxxxx.mp3 to the F drive? or does it only work in corresponding with my ITUnes program itself on C drive??

Click here and follow the instructions.
(47765)

Can't find a folder after upgrading to maverick and still have the previous OS

Hi,
Last night I upgraded my mac to maverick...my previous OS was in Disk C and since it was showing that disk is full i had to put maverick in disk D..so i have two disks with OS that means less space for my personal use....also while putting maverick in D I already had a folder containing movies in it...When i am searching in spotlight i can get the movie but am not able to find it without it....Also how do i get rid of the previous OS and should i do that??

ishica ghosh,
it sounds like what you’re calling your Mac’s internal space is what I’d call your Mac’s internal hard drive, and what you’re calling your three separate disks are what I’d call three partitions of your internal hard drive.
Let’s begin by approaching these aspects one at a time. On my Mac’s internal drive, only 22 GB of space is being used in total, including Mavericks and perhaps a dozen apps. If your Disk C has been sized to be 119 GB but it is mostly filled up, then it seems as though you must have significantly more apps or data installed there than just your old OS. Do you have more than one administrative user and one standard user under your old OS?
Here’s something that you can try to find out the amount of space that is being used by the user accounts on Disk C: boot into the old OS by holding down an Option key as you power up, use your cursor keys to select the OS on Disk C, and press the Return key. Log in as its administrative user, and from the Finder press Command-Shift-U to open the Utilities folder. Run Terminal.app in that folder. Within the Terminal window, give it the following command:
sudo du -sm /Users/*
This command will ask you for a password; give it the administrative user’s password. The password will not be displayed as you type it. Please copy the output from this command into your reply.

How can i get my daughter's imessage on my iphone and still have it show up on her ipod as an unread message

I have my iPhone setup so I can also get all of the iMessages that my daughter sends and receives on her iPod. The problem is that if I read the message first then it doesn't show up as a new message on her iPod and therefore she doesn't know that a message was sent. Is there a way that I can get my daughter's iMessage on my iPhone and still have it show up on her iPod as an unread message? Any ideas from anyone will help. I can't figure it out

HI,
I am not sure that I can really add anything to to this.
Apple used the phrase "sync" when saying what Messages on the Mac would do in regards to showing iMessages that were going to iOS devices.
It took to OS X 10.8.2 and iOS 6 to get as close as we have right now.
At best it looks like "Sync" means "Display on all Devices" and not much more.
The Mac version implies it will do more as there is a setting to notify people by return that you have read the iMessage.
The iOS devices have a similar "Send Receipts" item in the settings.
However actually reading an iMessage on one device seems to bear very little resemblance to anything that happens or can be seen on another device.
It seems for most people reading an iMessage on one device shows nothing at all on another device (the presumption being it arrives all places at the same time)
Your post is the closest I have seen to someone suggesting that it can be different on different devices.
You also seem to be implying that there is almost a time difference it the time your iPhone gets the iMessage and the time the iPod touch gets it.
I have certainly seen the "silent arrival" of iMessages on both my iPhone (when my computer and Messages is On) and on the iPhone if the conversation started on the Mac.
The Mac end will show both "Sent" and Received sides as it "Syncs" the conversation and beeps the alert sound for the Received part and the iPhone will remain silent.
Even "talking it through" like this in this post I am not coming to any real conclusions about what to try.
I am not even sure what to suggest to test for things to look out for.
10:13 PM Monday; January 21, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can I delete the pictures from my camera and still have them in my photos?!! Thank you !!

Can I delete the pictures in my camera roll and still have them in my photos?!! Thank you !!

No, you can't. If you have created albums on the iPad and think that there are copies of the photos in those albums, that is not how it works. The albums created on the iPad merely contain pointers to the photos in the camera roll or to any synced photos that you have. If you delete the photos from the camera roll, they will be deleted everywhere and will be gone.

Can two Apple IDs be linked so that they can share data? My iMac and iPad have the same Apple ID and sync contacts, bookmarks, etc. My wife's iPad has a different Apple ID. Can it be linked somehow to mine to share contacts etc?

Can two Apple IDs be linked so that they can share data? My iMac and iPad have the same Apple ID and sync contacts, bookmarks, etc. My wife's iPad has a different Apple ID. Can it be linked somehow to mine to share contacts etc?

No. You cannot link your contacts to hers. However, you can use Home Sharing to share the information:
Understanding Home Sharing
iOS- Setting up Home Sharing on your iOS device
Setting up Home Sharing for Apple TV (2nd & 3rd generation)
iTunes- Setting up Home Sharing on your computer

My system software has crashed, and I am hoping to use an apple certified data recovery specialist in Atlanta. Who can I use and still have my warranty coverage after attempting to recover the data?

My system software has crashed, and I am hoping to use an apple certified data recovery specialist in Atlanta. Who can I use and still have my warranty coverage after attempting to recover the data?

Contact the nearest Apple store for a definitive answer. We are users like you and cannot provide you with an accurate answer.
Ciao.

Can seeded Elements and Balance have different Date Track

hi,
The Elements created in our instance is date tracked to 01-JAN-1900 and the seeded balance date tracked to 01-APR-2005. Can seeded Elements and Balances have different date track both being seeded. Example Element is "PF INFORMATION" and Balance Named by "Leave Encashment"
How to resolve this problem when I am trying to add seeded Balance which is date tracked to 01-APR-2005 to Element date Tracked to "01-JAN-1900". I am not able to find the Balance in that Element as balance is date tracked later than Element.
If I want to add custom Element which is date tracked to 01-JUN-2002 and Seeded Balance which is date tracked to 01-JUN-1950. Since in this case i am not able to see the Custom Element in the Balance screen.
Thanks
Ram

you are not allowed to add feeds to a seeded balance type.
Can the dates be different? Sure. Look to your own dates.
By the way, why bothering about dates in 2005 and 1900, if you want to run a payroll now?

I can not pair my I hphone 6 with my iPad bot are op to date with soft wear and I have tried to reset the network of both of them with no success

i can not pair my I phone 6 with my iPad bot are op to date with soft wear and I have tried to reset the network of both of them with no success

Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

Can I back up the organizer, move my photos and still access them in PSE?

I backed up my catalog to an external HD last night and there were about 20 disconnected files. I was not able to locate them so I allowed the back up to continue without them. Do you know what the consequences are for that?
Also, several of my photos are on my C drive and several are on the external HD. My catalog included photos from both places. When I move the rest of my photos from the C drive of my computer to the external HD will the catalog still be able to access them or will I need to back everything up again?
My goal is to free up space on my computer so PSE will stop freezing up. All I'm intersted in doing right now is getting all of my photos into the organizer and tagged. I'll edit them later as I begin to create digital scrapbook pages.
Can someone tell me if the way I'm going about this is correct?
Thank you,

Thank you Ken. I backed up everything to my external HD, but now I think I'd rather just move everything there and recall my photos from the ext HD to free up space on my C drive. Is that possible?
Date: Wed, 22 Feb 2012 15:55:14 -0700
From: [email protected]
To: [email protected]
Subject: Can I back up the organizer, move my photos and still access them in PSE?
    Re: Can I back up the organizer, move my photos and still access them in PSE?
    created by photodrawken in Photoshop Elements - View the full discussion
When you use PSE to back up your catalog, the actual photos as well as the catalog (database) are backed up. When you restore from a backup, you can specify where the incoming photos will be placed. Ken
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4223403#4223403
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4223403#4223403. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I downloaded Yosemite OS X and when I try to select my HD (the disk) where I want to install it, the hard drive doesn't have enough space. What can I do and still have all my files? I haven't backed up...

I downloaded Yosemite OS X and when I try to select my HD (the disk) where I want to install it, the hard drive doesn't have enough space. I have a MacBook Pro bought in 2008. What can I do and still have all my files? I haven't backed up...

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
I recommend that you also make a backup before proceeding. Just quit the installer.

When you download iTunes material, does iTunes record the IP used where it is being downloaded to? I am trying to track a lost/missing IPOD Touch and want to know if they have that data.

When you download iTunes material, does iTunes record the IP used where it is being downloaded to? I am trying to track a lost/missing IPOD Touch and want to know if they have that data. It was left on a small street and someone has found it and has been hacking into my account by resetting my password. They took about 41+ dollars from my account. I am hoping the IP it was connecting with to download to it was tracked and that I can get that information to figure out where it is located.

No. From the second link below.
"Apple does not have a process to track or flag lost or stolen product
- If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
- Report to police and change the passwords for all accounts used on the iPod.
- Apple will not help
Reporting a lost or stolen Apple product

Is there any vi or possibility to find the hole dates in an directory and to list the data-pfads as a string?

is there any vi or possibility to find the hole dates in an directory and to list the data-pfads as a string?
like in windows a search-funtion?
I have found one VI, it list the data in the directory self (the pfad from the data as string) but not the data in an under-directory. it also has the funktion to list me the under-directory but it do not list the complite data in every directory
can somebody help me pleace
THX

Hallo Chef,
unter LV8.21 befindet sich die beschriebene Funktion in der File-Palette:
Dummerweise gibt es die Funktion in LV8 noch nicht... (Deshalb ist es immer eine gute Idee zu sagen, mit welcher LV-Verson man arbeitet!)
Du kannst aber unter vi.lib/utility/RecursiveDirList.llb nachschauen, wie es gemacht wird
Message Edited by GerdW on 08-17-2007 11:17 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
AdvFileFunc.png ‏10 KB

VF01 Determine Billing date for billing index and printout to current date

Hi
we need to determine the Billing date for billing index and printout to current date
What can I do to determine automatically at the time of creation current day to Billing date for billing index and printout?
please let me know
Best Regards,

Hi Beatriz ,
You have two options here. you can chose either of these solutions:
1.
A. T-Code: VTFL ( if using del related billing) For the billing document and delivery, at item level assign the copying requirement 011 or if you are currently using some other routine then you can use following in that
VBRK-FKDAT = SY-DATUM.
B. T-code VTFA (if using order related billing)
Similar to A, using copying requirement 011.
2. You may also try option of Checking in the User Exit for the Program RV60AFZA & RV60AFZA.
Please let us know if this helps
Regards
Harpreet

After successfully importing my bookmarks through Firefox Sync from my old to new computer, can I purge the old computer and still have the bookmarks on the new

I want to upgrade my computer and did a Windows Easy Transfer to my new one. My Firefox bookmarks did not show up on my new computer so I used Firefox Sync-which worked fine. Now that I have the bookmarks on the new computer, can I erase the old computer and still have the bookmarks on the new one.

First, disconnect your old computer from Firefox Sync so you don't accidentally delete the data from sync, but then yes you should be good to go.

In numbers, can i hide rows of data in a chart and still have that data show up in my graph?

Similar Messages

Maybe you are looking for