IN NUMBERS HOW DO YOU FILL IN FOR A SERIES OF NUMBERS OR DATES

In numbers how do you fill in for a series of numbers or dates without doing it manually

You can enter a value in two cells that establishes a pattern, then select the two cells, then click (and hold) on the little circle at the bottom right corner of the selection and drag to fill as needed.
A Number sequence:
A Date sequence:

Similar Messages

  • How do you fill in a form that was saved as a template? When I try, the "template" shifts, which is not how a template should work!

    How do you fill in a form that was saved as a template? When I try, the "template" shifts, which is not how a template should work!
    Templates, as I understand them, are fixed; you can "fill them in" without shifting them. Yet, I've saved doc as a template AND it shifts. Argh!

    Thanks for your response.
    I've managed to fix it but I wouldn't recommend the following as I'm sure its unsupported and I'll probably have problems down the line
    On the host
    * mv /etc/zones /etc/zones.bak
    * reboot single user
    * apply kernel patch (the one that ultimately I had to get on and which was giving pre-req dependency errors when running zones)
    * create a new zone now that host system is all up to date
    * Copy the operating system directories of the new zone (the one that's all patched) over the troublesome zone (the one that can't take the patch). Take backups first
    * cd /zones/new-zone/root
    * find sbin -print | cpio -pudm /zones/bad-zone/root
    * find usr -print | cpio -pudm /zones/bad-zone/root
    * find lib -print | cpio -pudm /zones/bad-zone/root
    * cd /zones/new-zone/root/var
    * find sadm -print | cpio -pudm /zones/bad-zone/root/sadm (this copies patches and pkgs directories and I'm sure a lot of other stuff that I didn't want)
    * mv /etc/zones.bak /etc/zones
    * reboot host
    * boot the old zone up. It should now have up to date patches
    I'm sure there are real no-no's in taking this approach but it seems to have worked for me. I'll update if I find there are some horrors down the line
    Edited by: paul_xedos on Mar 25, 2010 4:07 AM

  • How Do You Fill in a Series?

    How do you fill in a series? On Excel it's so easy, I've been trying to figure this out all day on iWork 09. I have found all the other fill options but I can't find out how to fill in a series anywhere. I've tried everything and I'm really annoyed at this point, please help =(

    And of course it's well described in the Numbers User Guide available to every users from the Help menu.
    Yvan KOENIG (VALLAURIS, France) vendredi 28 août 2009 10:31:29

  • In FF (30.0) Password Manager, when you open Edit, what are all the fields and how do you fill them in?

    When you open Edit, there are two choices: Web form and annotated.
    What is the difference?
    Then, there are fields for Host, Submit Prefix, Username, Password, etc.
    How do you fill in these fields?
    When you click to have the manager "Guess from Current Page," all fields don't necessarily get filled in, so is it just for username and password?
    I use the edit feature constantly, so it's a little odd not to see more detailed instructions here.
    When I click on Tools, the Saved Password Dialog is on the list, so it's on my toolbar all the time.
    I use it constantly.
    What is the latest in password security? I know there are competing ideas. What does Mozilla think?
    Thank you.

    Hmm, could this be a feature of your extension, "Saved Password Editor"? The support article ([[Password manager - Remember, delete and change saved passwords in Firefox]]) doesn't show those changes when I switch the version from 29 to 30 in the left column.

  • How do you put a signature cell in a numbers spreadsheet?

    How do you put a signature cell in a numbers spreadsheet?

    I'm a car dealer and I created the bill of sale for my dealership in a Numbers spread sheet. I want to be able to use my iPad mini w retina for customers to sign directly on my iPad then print out the BoS with signatures on it so I can make transactions easier for my customers in case I have to meet them somewhere instead of my office. Then I would have the ability to send them another copy if they happen to lose theirs without digging thru my files to find the hard copy and scan and send it to them.
    Thanks

  • How do you delete more than one row on numbers?

    how do you delete more than one row on numbers?

    Hi operatorcarmax,
    Select the Rows (shift click works for me). Then hover the cursor over any selected Row label to see the upside-down triangle. Click on it to see a Pop-up menu.
    The Numbers User Guide is available for download under the Numbers Help Menu. A good read.
    Regards,
    Ian.

  • Using numbers, how can you set percentage to show decimals?

    When using numbers, how do you set the format to allow for decimals in a quotient formula with the cell formatted for percentages?

    It would be 'View' > 'Sidebar' > 'Bookmarks'. Shortcut 'Ctrl' + 'B' on the keyboard.
    If the 'View' menu is not visible please try pressing 'Alt' + 'V'.

  • Passcode are all numbers how do you change to letters

    passcode are all numbers how do you chane them to letters

    This might help
    Press the SETUP button on your printer's control panel.
    Using the arrows, select DEVICE SETTINGS, press OK.
    Select LAN SETTINGS and press OK.
    Select Wireless LAN Setup and press OK.
    If a message appears to press the WPS button, press STOP to cancel.
    Select STANDARD SETUP from the next screen that appears and press OK.
    Highlight your access point or router and press OK.
    Press OK again to confirm the access point name.
    Enter your passphrase using the keypad to the right.
    At the screen where you enter your passphrase, in the top right corner of the LCD screen you should see a :1 . This indicates that you are in numeric entry mode. If you press the asterisk key (*) it will switch to :A or uppercase letter mode, pressing asterisk again with switch to lowercase letter mode. To enter a letter in either letter mode, you will press the associated number key to cycle through the available letters. For example: To enter a letter "c", you will press the "2" key three times.
    Press OK when done.
    The LCD screen will say "Connected" if the password is correct.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • How can you get audio for  books on the kindle

    how can you get audio for  books on the kindle

    The audio inputs on Macs are line level inputs and not mic inputs.  You need a mic with a built in preamp (battery powered) or more conveniently a USB mic or bluetooth headset.

  • Certain Numbers templets allow you to drag and drop contacts to populate cell data, how can I create that functionality in my own tables?

    Certain Numbers templets allow you to drag and drop contacts to populate cell data, how can I create that functionality in my own tables?

    If you haven't come across the workarounds thread you may find helpful tips there on this and other ways to work with Numbers 3.
    ronniefromcalifornia discovered how to bring contacts into Numbers 3. As described in this post:
    "Open Contacts
    Select all the cards you want
    Copy
    In Numbers, in a table, select cell A1
    Paste
    Boom. Works great. Even brought in the pictures. Cool."
    So instead of drag and drop, just select in Contacts, copy, and paste into Numbers
    SG

  • Connected to tv.how do you fill the screen with the ipad

    Have connected to tv all ok but how do you fill the screen with the mirror image from the ipad

    Yes I have the iPad cable bought from apple

  • When you make a Apple ID how can you choose none for credit card type

    When you make a Apple ID how can you choose none for credit card type

    You need to follow the instructions on this page when creating a new account : http://support.apple.com/kb/HT2534 - otherwise you won't get the 'none' option and you will need to enter credit card details before you will be able to use the account in the store

  • How do you write UNDO for a text item?? examples? or a REDO??

    How do you write UNDO for a text item?? examples? or a REDO??
    I created a pop-up menu with CUT, COPY, PASTE, UNDO, CLEAR for my text items.
    Using MAGIC menu type works great but there is no MAGIC for UNDO or REDO.....
    How do you write UNDO for a text item?? examples? or a REDO??
    I have Oracle Forms 6i...
    Lets say I highlight all the text in the text item, and start typing over it... then I realize OH NO it is the wrong text field...
    Now I want to UNDO the typing and get back to the previous text.
    I'd use the initial value that was populate right? How do I access that if that is correct?
    Thanks, Bill

    You can use;
    <ITEM> := Get_Item_Property(<ITEM>,DATABASE_VALUE);
    Or you will have to write a pre-text-item trigger;
    PRE-TEXT-ITEM:
    :CTRL.CURRENT_VAL := :<BLOCK>.<ITEM>
    MENU (PL/SQL):
    :<BLOCK>.<ITEM> := :CTRL.CURRENT_VAL;
    You may also want to set the item property back to ITEM_IS_VALID so that item validation does not fire again.

  • Droid 4 how do you add sounds for the alarm.

    How do you add sounds for the alarm on the Droid 4. I do not like any of the alarm clock sounds.

    In your internal storage of the phone, create a folder called alarms. Then copy or move the audio files to that folder.
    You might need to download a file explorer application from the Android Market.
    If the alarms in the root of storage doesn't work. Create a media folder, then a audio folder in that folder and then move the alarms folder in that folder.
    Or the simplest route, download the app called Ringdroid. You can use that application to set sounds as various ringtones types.

  • How do you edit photos for extravert 2

    how do you edit photos for extravert 2? I had extravert 1 and it had edit icon.

        fairiemonkey,
    Sorry to see you've had trouble editing your photos! Each phone has there own unique features. The original Extravert had photo edit features including drawing and changing contrast, sharpness, blur and brightness. The Extravert 2 does not have those same features. You can still change things such as camera options for white balance and resolution but do not have those same photo editing options available.
    You can transfer pictures to a desktop computer and then use photo editing software on your computer for more advanced photo editing. Here are instruction on how to tranfer the pictures: http://vz.to/1z1nB6H . Just scroll down to where it says, From the Device to the Computer.
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

Maybe you are looking for