In numbers, using a scatter graph, the points come up as circles. Is there a way of changing this so they are crosses like a standard scatter plot?
I have looked into the settings of the graph but I cant find anything to change this.
That's not good! I can't reproduce that problem here. Are you syncing via iCloud with iOS and perhaps opened it there too? And are you sure you're opening the same document? Maybe you have one with the same name in two different places?
Maybe you will have luck with this:
If Revert To doesn't work and there's nothing in Time Machine with the chart, you may have to set up the chart again and, just to be sure, File>Save before you close the document.
SG
Similar Messages
-
Hallo everyone,
I just tried my external disk on my Macbook air and I cannot save data to it any longer. This external disk was used with windows. Now i want to use it with macbookAir as I have changed my computer. It seems that OSX.10.8.5 can read the data on this external drive but when I try to save new data to it (pdf documents from the web for example) it refuses to save the data ans the message I get is that my drive is "read only". Please is there a way to change this or do I have to format the re-format the external drive?
Thanks for your helpYou will have to reformat the drive for use with a Mac.
Mac only: Format as MacOS Extended (Journaled)
Mac and Windows: Format to MSDOS -
I need a little more formatting flexibility from Lightning. When I print a weekly calendar, the title reads "Week 10" in large bold print. Is there a way to change this to my name? I searched through the entries in the Tools/Calendar/Advanced file, but didn't find what I was looking for.
Thanks in advance!guigs2: I appreciate your kind response. But please let me clarify: it's not the calendar's title that I'm trying to change, but the notation of which week of the year the calendar has noted. When printing the weekly task view, the calendar's title is at the top. A subheading is then available to edit as well. But what I'd like to edit is the third heading, which this week reads "Week 10". It's the "Week 10" that I'd like to edit. Is there an entry in a configuration file that I could edit, or ???
Thank you for your time and interest! -
Hi
My osX Lion loaded iMac always prints with a default "scale" of "150%" and consequently won't print anything on a single page. I always have to go into "Printer Settings" and change it to "100%" to print properly. Is there any way to set this up to default at "100%"?
Thanks!Hi, just a note that might help. I notice in baltwo's screen shot of the print dialog, that the Preset titled "Plain paper, best" is selected.
anderdan33316, if you have selected a preset, and that preset was created with the "Scale" set to "150%". I suspect your issue is related to this.
for a possible solution,
1. in Safari, open the Print dialog (by cmd-p, or choosing "Print..." from the File menu, either way works).
2. in the dialog, manually set the Scale to 100%
3. in the "Presets:" pull-down menu, select "Save Current Settings as Preset..."
4. enter a label that is meaningful to you, such as "Standard", "Basic", "Default" - it can be modified later
5. print that page from that dialog, and the customized Preset will be one of your choices until you decide to delete it.
hope this helps,
Roy -
Question
When I do a search for an image I only have a limited number of images. There used to be a ton of pictures on my screen and an unlimited amount of pictures to look through. Is there a way of changing this back to the way it used to be???Thanks. So there's no means of knowing whether a text message has been delivered, not to mention time of delivery. Perhaps I've gone for the wrong phone. It might do a lot but seems to miss out on some basics.
-
I have a subscription and I pay each month for that. I installed the suite Adobe (indesign, photoshop, illustrator and acroba) on my second computer (laptop) but they are installed like trial version. I can't activate them with my adobe. They still are trial versions... How can I actvate them on my second computer ?
On that computer... Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
I have cs4 installed on my old computer, i have since lost the disk and serial #s. Is there any way to recover this information and install the programs on my new computer? I used my old computer for college and haven't used it in awhile, now I have a job that can benefit from having those programs. I was wondering if ADOBE keeps records or something to where I can download the programs on my new MacBook and use my old serial #s.
Find your serial number quickly
Download CS4 products
Mylenium -
I want to change my Apple ID to what I have as my rescue ID. The system will not let me.Is there a way to do this?
You'll need to change/remove your rescue email address first :
1. Navigate to appleid.apple.com using your web browser.
2. Click "Manage your account"
3. When prompted, sign in using your Apple ID and password.
4. Click Password & Security
5. You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
6. After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
7. Once you've finished editing your rescue email address, click the Save button directly below the email field. -
When viewing pick lists from different web sites my iPad 2 (safari) selects the first choice on the list and loads it without allowing me to pick my option; is there a way to change this default?
With your playhead over the clip in the timeline and that V track's 'track selector' as the only one active...hit the 'f' key.
This will load the original clip into the viewer at the matching point of the frame in the timeline.
K -
Hi at the moment my ipod is on manual sync mode. Is there any way of changing this to auto-sync without losing the music on my ipod or library? Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
This is so I can delete music from my ipod knowing its rated on my i-tunes so I can then see later if I want to re-add it based on its rating
ThanksIs there any way of changing this to auto-sync without losing the music on my ipod or library?
Unfortunately there is not.
Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
Not without the help of third party software such as this one:
http://www.copytrans.net/copytrans.php
B-rock -
I had photos from MobileMe organized into different events. When iPhoto made a MobileMe event (when MobileMe ended), it took all of those photos out of the other events and put them all together in the new "from MobileMe" event. Is there any way to reverse this?
Only to load your backup from before downloading the MM photos
LN -
Thunderbird puts a new message at the end of the thread.
Is there any way of changing this preference so that new messages are displayed at the top of the thread.
This is is more logical. You need to see new message in thread directly, rather than scanning to end of thread to see what is there.No it is not possible. The newest message is attached to the message it is in reply to.
The conversations add-on might better suit your needs. see https://addons.mozilla.org/thunderbird/addon/gmail-conversation-view/?src=ss -
When I forward an email from my Mac Mail, the body of the email I just forwarded shows as an attachment in the recipients outlook. Is there a way to change this so my clients don't have to open an attachment to read something that I forwarded to them?
Open Terminal in Utilties and copy/paste
This will send the attachment embedded inline. (This works in Snow Leopard, but not sure about Lion. Do a test first. If it doesn't work, just google "send attachment embedded + Lion." You don't actually have to send the message to see how it will appear.)
defaults write com.apple.mail DisableInlineAttachmentViewing 0
To reverse the setting, change the 0 to a 1
However, whether this will work or not will depend on what the e-mail client on the receiver's end does with it. -
I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online. Is there a way to do this?
Hi John,
Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
Linda -
I have downloaded music to my Itunes library from CDs and want to copy the music to blank CDs. Is there a way to achieve this?
Make a playlist of the items you want to burn, put a blank cd in the drive and burn the playlist to it.
Maybe you are looking for
-
Can I get a refund on an app I purchased but don't like?
I bought Pages and Keynotes from the app store for two different projects i have to do for school. However, i once i opened them.. niether one had the templates or style that i needed/wanted.. I really would love it if i could get a refund. I've tr
-
Hi All, I figured now that I know more about the actual problem I am having I would post a new message and be a bit more specfic. I am using TL 4.6 Build 418, Oracle 8.1 & WLS 7.0. I can not get Toplink to bind my parameters. When I simplify my query
-
No connection to server via LAN
When I say _nc:NetConnection = new NetConnection(); _nc.connect( "rtmp://127.0.0.1/ImmuneDefense" ); It works Now I want to let another computer in the local network connect to the server. _nc.connect( "rtmp://192.168.0.9/ImmuneDefense" ); It doesnt
-
Hi Experts Scenario: We have water as Pipe line material. We have activated 89 inspection type & user is creating manual Inspection lot for the same. Since this is a Pipe line material, there will not be any PO, GR so no inspection lot at GR. We do t
-
Can't attach files in yahoo email with Lion
After installing Lion, I'm unable to attach files from my Yahoo email account.!x? Also, I am unable to print from my Epson NX 400 printer as Epson has provided an update for Mac OS X v10.7+ Anyone have recommendations to correct issues, other than de