In OBIEE 11g How to Change  Import Type Local Machine to Remote Machine

Hi All,
I Have Installed OBIEE 11g Client tools in my Machine and server is in Other Server.when i tried to Import metadata i am getting Connection Falied error.
When i tried to import metadata in import type option i can see only one option Local Machine that is also in Disable mode.
how to make import type option to Remote.
Thanks and Regards
Kiran Kumar

In BI EE 10g, there was no Oracle Client bundled along with BI EE. So, BI EE will use your Oracle DB Home client to connect to the database. So, when you try to connect to the database through the Repository or BI Server, it will try to find the tnsnames entry in the Oracle Client of BI EE 11g instead of your database. There are 2 options to work around this
Copy your tnsnames.ora and Paste it to
1. Drive:Oracle\Middleware\Oracle_BI1}network\admin
2 Drive:Oracle\Middleware\oracle_common\network\admin
TNS File like,
DBName =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Your Server IP)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DBName)
Thanks,
Balaa...

Similar Messages

  • Obiee 11g How to let user change password

    obiee 11g How to let user change password ？
    i not mean use weblogic console。 normal user how to change password。

    With 11g, OBIEE essentially uses the 10g notion of external authentication.
    By default, this is done by the WLS (Weblogic) LDAP identity store, but it may be done by another supported Authenticator either within WLS, or in the OBIS meta data (i.e. Custom Authenticator or LDAP). As such, OBIEE no longer has any control over user passwords; this is why the steps referenced in note 1102353.1 do not apply to OBIEE 11g, but only to internal/repository-defined users in OBIEE 10g.
    So, as with password maintenance in OBIEE 10g when an external authenticator is used, it is within that external authentication system that password is changed, not within OBIEE 11g. There is no option in OBIEE 11g to allow users to change passwords.
    There are two work-arounds with which you can change your password:
    1) From the Weblogic administration console/WLST.
    You need to give such user access into Weblogic console or access to browse through involved MBean hierarchy and other modify permissions. Changing the password using WLST instance is covered here:
    Ideally, the console and WLST approaches are used by Administration accounts to manage other users. But the console and WLST can be made to allow other users to change passwords (which will be more or less like carrying out an administrative task by users themselves)
    2) Using a programmatic approach.
    Here the application that intends to provide password change functionality to its users should implement this functionality on its own (GUI plus call to the relevant Weblogic API). Weblogic provides an MBean that the application can use to accomplish this. See here for more information.
    An enhancement request exists for this functionality. This is unpublished bug 11836170 - enable non admin users to change passwords in obiee 11g.

  • In OBIEE 11G, how to get the special parameter created by JAVA?

    Hi Experts,
    In OBIEE 11G, how to get the special parameter created by JAVA?
    For example:
    In JAVA , it has set one parameter named 'test'.
    So how to get the parameter in filter area in OBIEE?

    Hi Kobe,
    No P2 holds the parameter name like PresentationTable.ColumnName, in your form you may go for complete name or just column name and before submitting the form you can define the Action url.
    I would suggest to read section 6.3.2.1.
    ex:
    <SCRIPT LANGUAGE="JavaScript">
    changeAction(url) {
    var TestVar = form.inputbox.value;
    document.this_form.action="saw.dll?Go&Path=/Shared/Test/SB2&Action=Navigate&P0=1&P1=like&P2=Customers.Region&P3="+TestVar;
    </SCRIPT>
    </HEAD>
    <BODY>
    <FORM NAME="myform" ACTION="" METHOD="GET">Enter something in the box: <BR>
    <INPUT TYPE="text" NAME="inputbox" VALUE=""><P>
    <INPUT TYPE="button" NAME="button" Value="Click" onClick="changeAction(this.value)">
    </FORM>
    If helps pls mark.
    Edited by: veeravalli on Oct 24, 2012 10:25 AM

  • How to change data type of attribute in caf

    hi.
    this is my problem.
    i been added a attribute in an entity service called emloyee. named "Birthday", use the data type "com.sap.caf.core.date".
    when i tried modify the entity service, i hit exception about "DST Daylight Saving Time".
    because of DST, the date will add an hour such like "1957/04/01 00:00:00.0" to "1957/04/01 01:00:00.0", and com.sap.caf.core.date will throw an exception.
    is anyone had same problem like me?
    how to fixed it(if passable)?
    and, how to change data type?
    thanks.

    Hi Sruthi,
    all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
    Regards,
    Noel

  • Where is "save as" or how to change file type in Preview in Lion?

    Where is "save as" or how to change file type in Preview in Lion? I used to use Preview to change quickly change a lot of PNGs to either JPEGs or PDFs but with the introduction of versions auto save etc there no "save as" in the File menu. Any suggestions how to get this functionality back or how to get around it within OS X (no Photoshop etc)?

    Just wasted 15 minutes looking for that.  What's wrong with Save As?

  • OBIEE 11g How to Exclude/Include Multiple columns on BI Report at Run Time

    OBIEE 11g How to Exclude/Include Multiple columns on BI Report at Run Time

    Exclude:
    you Can exclude columns in either Table view or pivot table view by placing those columns in Excluded section but you will notice that it will appear in bi server parsed sql query.
    Not sure you were asking about runtime??
    would you please explain your question!!
    Thanks
    NK
    Edited by: DNK on May 8, 2013 9:48 PM

  • How to change light type?

    Does anyone know how to change light type?
    What happens is that I have a button that I would want to create a Point light, but it just create a spot light.
    Does anyone know how to change it to create a point light?
    My code is:
    //Add a Point Light to active Comp
           addLightCtrl.onClick = function(){
               var pointLight = proj.layers.addLight("Light", [960, 540]);

    See the LightLayer object's lightType attribute. Page 100 of the AE CS6 scripting guide.
    pointLight = activeItem.layers.addLight("Light", [960, 540]);
    pointLight.lightType = LightType.POINT;

  • How to change latency type to fast?

    How to change latency type to fast?

    ADSL Line Status
    Connection information
    Line state:
    Connected
    Connection time:
    5 days, 03:08:00
    Downstream:
    16,403 Kbps
    Upstream:
    948 Kbps
      ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    3.1 dB / 4.7 dB
    Line attenuation (Down/Up):
    30.5 dB / 16.2 dB
    Output power (Down/Up):
    20.9 dBm / 12.2 dBm
    FEC Events (Down/Up):
    313987846 / 3701
    CRC Events (Down/Up):
    2155 / 18271
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    49173 / 14016
    Error Seconds (Local/Remote):
    0 / 17361

  • How to change nat type 3 to nat type 2 for Plastation 4?

    how to change nat type 3 to nat type 2 for adaptation 4? i am havng a complicated time with this im'm just trying to play online and been at it fotr 3 days i have tried about everuyhing n portforwarding.com i have a Cisco Linksys E1000

    Hi ceasar14. I actually found some steps (from a source) that worked for me. I'm not sure if it will work for you. Here are the steps:
    1. Get the MAC address of your PS3. To find your MAC address simply go to
    Settings > System Settings > System Information
    2. Assign a static IP address on your PS3.
    3. Access your router's user interface to open a few ports. 
    4. Under Applications and Gaming > Port Range Forwarding, open the following ports:
    TCP: 80, 443, 5223
    UDP: 3478, 3479, 3658
    5. Once this is done, powercycle your PS3 and the router.
    6. Run a connection test and check if it is now on NAT2.
    Good luck.

  • HOW TO CHANGE ACCOUNT TYPE FROM IMAP TO POP

    HOW TO CHANGE ACCOUNT TYPE IN YOUR EMAIL FROM IMAP TO POP

    You can't.  You need to create a new account in Mail.
    Note, when setting up a new account (after clicking the '+' in the Accounts proeference), enter an invalid email address or option click the Continue button to be given the choice of account type (POP or IMAP).

  • OBIEE 11g - How to create clean looking pivot tables

    Hi, does anyone have a good way to clean up the appearance of pivot tables in OBIEE 11g? I'm a big fan of Stephen Few and firmly believe in the "minimize non-data ink" theory. Unfortunately, there seems to be a lot of stuff on OBIEE pivots that I can't easily clean up. Does anyone have ideas for:
    1. How to remove the "gray" / "beige" coloring from column and row dimension? I opened a ticket with Oracle 6 months ago, and basically they've just responded that it is a "enhancement request" for a future version (aka not going to see it for a LONG time)
    2. For my "across" dimension, I don't seem to have a good way to show the dimension name. There is an option under "column properties" to "display heading" - but when this is turned on it scrunches the heading up directly over the column that has the down dimension members. I really want this to go across the pivot.
    Any help on this would be greatly appreciated.
    Thanks!
    Scott

    Hi,
    Steps,
    Just create DSN (odbc connection for the excel data source) then try to import via rpd that time u must need to select "System Tables"
    For more steps,
    http://allaboutobiee.blogspot.com/2012/03/excel-as-data-source-in-obiee.html
    http://oraclebi.blog.com/working-with-excel-datasource-in-obiee
    http://www.ascentt.com/2012/01/importing-excel-file-into-obiee-11g
    http://obiee101.blogspot.com/2008/06/obiee-excel-import-prepping-data.html
    Note: user id and password u can set it u r own and need to be updated in your connection pool alos else u can go with empty user id and password
    Thanks
    Deva

  • How to change set type attribute of a product

    Hi ;
    I created additional fields for products by using "COMM_ATTRSET". It created a table and functions but I dont know how to change this additional attributes.I cant use these attribute set functions because i dont know fragment_id yet. I think there must be a function encapsulates them.
    Is there any BAPI to change set type attributes?
    PS: In forums , I found an FM "COM_PRODUCT_MAINTAIN_MULT_API" but I think it hasnt been used anymore in CRM7.0
    Thanks

    Thanks for your reply ;
    but FM 'COM_PRODUCT_UI_MAINTAIN' doesnt have any generic import parameters to send my data to it in form of  newly created attribute set type table "ZPRODUCT".
    I want to set some fields of ZPRODUCT and i need to send them in this structure,  this table has column FRG_ID , if you set an additional  parameter for the first time , it generates new GUID..I think  'COM_PRODUCT_UI_MAINTAIN'  generates this GUID but i dont know how to use it.
    Can you give an example about using this FM?

  • OBIEE 11g: How to send email from Analysis (via Action Framework)

    Hi,
    I have installed OBIEE 11g SampleAppLite in my POC box.
    One of the features I want to have is to allow users to send their feedback (email) about a report to the report owner. Can this be done without launching Outlook? I tried to Invoke a Browser Script and found that I can display a form showing Recipient, Subject and Message text fields, but I do not know how to send the email.
    Thanks!

    Hi Devarasu,
    Thanks for your reply. The link you gave is for sending iBots. But if I do this, users will not be able to send their feedback / comment.

  • How to change material type and industrial sector of the exsisting material

    Hi,
    There is an issue where user wants to change material type and industrial sector of the exsisting material .Is  it posible to do so??
    IF not ,how can we delete that material from material master so that another material with same number and required material type and industrial sector  can be created.
    Points will be definitely rewarded.
    Thanks
    Rohit

    Hi Rohit,
    You can change the material type in MMAM trxn code if the material dosenot conatain any open purchase requisitions, open reservations & open purchase orders. Also material stock should be zero.
    Remember the new material type should have same attributes same as old material type.
    OLD Material New Material
    1) Standard Price 1) Standard Price
    2) Manufacture part 2) Manufacture part
    profile actvated profile actvated
    3) Quantity & Value 3) Quantity & Value
    Updation in all areas Updation in all areas
    4) should have same GL 4) Should have same GL acs
    acs
    It is not possible to change Industry sector once created.
    If you want to delete the Material, you can flag it in MM06 trxn code.
    Reg,
    Ashok
    Dont forget to Assign points if useful.

  • Error value = 73, How to change the type of password?

    I want to use the famous wiki integrated in leopard, so I had to configure open directory and DNS.
    Well my problem come from that I can't configure open Directory, just after creating a new admin, I have no possiblity to change the type of password, there is just the type shadow, and I know that we had to choose open directory's type.
    Obviously, I'm authenticated in the workgroup manager
    Which services I had to turn on to use open directory's type?
    Or which mac I have to hit.
    THX

    Hi
    So I had to configure open directory and DNS
    What did you do or not do exactly?
    My problem come from that I can't configure open Directory
    You won't be able to configure Open Directory to allow different password types unless you either bind your Server to an existing KDC or make your Server the KDC. For the Server to be a KDC (Kerberos Distribution Center) it has to be an Open Directory Master. Successful promotion to an Open Directory Master Role absolutely depends on a correctly configured and running DNS Service - either on the server itself or on another server on the same network.
    There are plenty of posts in these forums outlining how to configure your Server in terms of DNS as well as how to promote to Open Directory Master. Apple themselves make available Admin Manuals that should assist:
    http://images.apple.com/server/macosx/docs/OpenDirectory_Adminv10.5.pdf
    http://images.apple.com/server/macosx/docs/NetworkServices_Adminv10.5.pdf
    Failing this these forums (as already mentioned) as well as:
    http://www.afp548.com
    Hope this helps, Tony

Maybe you are looking for