In OBIEE, retrieving base members along with their attributes is very slow

I can use Attributes in the prompts and not in the actual report columns, then the report retrieval is very fast. But as soon as I add the Base Member, Attribute1, Measures1, Measure2 etc, the retrieval is slow. All the measures are dynamically calculated. Adding the attribute to the prompt - works fine. How do I design a aggregation with the attributes, I have enabled the enable query tracking. Any suggestions.

I really recommend reading the DBAG section I linked in your other recent question: Re: ASO Cube with attributes very slow in retrieval
For various classes of attribute queries, aggregations are not / can not be used - unfortunately this is just how ASO works. Personally, I have had to make what would logically be an attribute into a real, stored dimension because of this limitation.

Similar Messages

  • How to retrieve all the users along with their password from LDAP

    Hello,
    Can anyone let me know how to retrieve and list all the user along with their password from LDAP.
    Thanks

    Hi Prashant,
    I have limited experience with Synchronization, but I agree with you - if you need to synchronize Passwords, you need to have the Password in clear Text.
    If you trying to build your own Synchronization Solution using any of the avaliable LDAP APIs, I don't think you can ever retrieve a user's Password in clear text.
    However, I did come across an interesting article & I hope you find it useful :-
    http://www.oracle.com/technology/obe/obe_as_10g/im/configssl/configssl.htm
    I am not sure if SSL is necessary - If you have a look at Metalink Note 277382.1 ( How to Configure OID External Authentication Plug-In for Authentication Via Microsoft Active Directory (MS AD) ), teh question asked by oidspadi.sh for the same is asnwered as "N".
    Regards,
    Sandeep

  • Is it possible to export full PCD object list along with their PCD ID?

    Hi
    Is it possible to export full PCD object list along with their PCD ID to an excel sheet or txt file?
    Any help will be appreciated.
    Regards
    Vineet

    Hi,
    I have provided a simple method below to Get all the PCD objects PCD  ID.
    1. Create a transport package.
    2. Add all the PCD objects for which ever you need the PCD ID.
    3. Now release the Transport package as the "File system" mode.
    4. Once it is done successfully, it will display all the transported object and its corresponding PCD ID in a table format.
    You can simply copy and paste it in a excel to get the PCD ID for the PCD objects.
    Hope this is helpful.
    Thanks,
    Mahendran B.

  • Extraction of Contexts along with their joins in Designer

    Post Author: sachinj
    CA Forum: Deployment
    Hi All,
    In designer, how can one extract the context along with it's relevant joins ?
    I tried File>Save As>Save as type changed to pdf. But the pdf does not give the contexts along with their respective joins.
    Does any one have solution to this one ..Thanx in advance.
    With Regards
    Sachin

    Hi,
    youa can use these two datasources:
    2LIS_11_VAKON                  Sales Document Condition     
    2LIS_13_VDKON                  Billing Document Condition   
    hope this helps...
    Olivier.

  • Copying tables along with their indexes between databases

    I use sql server management studio express.  I have a database that has some questionable schemas, roles, etc, so I decided to create a new database, with just tables, stored procedures, and user-functions.
    So I used the "import data" feature, which allowed me to select several tables, that were copied along with their data.
    Then, I scripted out all the user-functions and stored procedures from the original database, and pasted them into a query window for the new database, and executed the create statements for each.
    Then I got a message that I was lacking a full-text index.
    I then started examining some tables, and even regular tables with an integer primary key that is supposed to be an identity' field were not identity fields any more, and lacked the auto-increment.
    I tried to change that, and make them auto-increment, and then sql server told me that I can't do that.  I guess if there is already data inside an integer field, you can't make it auto-increment.
    So how do I solve all this?
    Thanks

    You cant modify a column to be of type identity. For that you need to do the below
    http://www.mssqltips.com/sqlservertip/1397/add-or-drop-identity-property-for-an-existing-sql-server-column/
    But in your case what works best would be to script out the table along with identity and then use it to create the table in the new database.
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Can Shuttles be based non-base  table ViewObjects with transient attributes

    Hello,
    Users have to select records from a data collection and a Shuttle looks most appropriate/nice for this purpose. We can introduce technical intersection tables in order to generate the Shuttles with JHeadstart 10g R3 if necessary, but there is no “functional” need to update any data in the database and therefore it would be practical if the ‘right’ side from a Shuttle can be based non-base table ViewObjects with transient attributes only. So, our interested is to know which records have been selected, i.e. moved to the right side from the Shuttle.
    Hope that my question is clear enough.
    Greetings,
    Michael

    Michael,
    This cannot be generated out-of-the-box.
    It is easiest to add the shuttle post-generation to your page, and then create a custom template to generate your custom shuttle into the page. I suggest you take a look at an example of a generated shuttle in a page, and the JHeadstart IntersectionShuttleBean class. You will see that the value property of <af:selectManyShuttle> points to the selectedKeys method in the JHeadstart Shuttle bean. In your case, you can create your own managed bean and bind the value property to your own method which will provide you access to the selected rows. The value property of the selectItem within the af:selectManyShuttle determines the property that is used to identify the selected row (which is the row key in case of Jhs-generated shuttles).
    Steven Davelaar,
    JHeadstart Team.

  • How to get string from jtextpane along with its attributes

    sir,
    How to get string from jtextpane along with its attributes
    i,e font,size,style,color etc.
    please help me out.
    my mail id is [email protected]

    JTextPane extends JTextComponent
    JTextComponent.getDocument()
    a Document is a set of Element, see Document.getRootElements(). Each Element has attributes, stored within an AttributSet object see Element.getAttributes()
    a Document can also be rendered as a String, see Document.getText( offest, length ), use it with 0 and Document.getLength() as parameters.

  • I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    wen6275,
    It looks like you're actually using a camera or phone to take a photo of your monitor.
    That's not what is commonly known as a "screen shot". 
    It looks like you're on a Mac.  Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
    I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
    Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file.  Would you mind elaborating?

  • Backup to TimeMachine with WI FI is very slow!

    Backup to TimeMachine with WI FI is very slow!
    I set the backup with TM but backups and slow
    We can Help Me ?

    alexrav wrote:
    Backup to TimeMachine with WI FI is very slow!
    I set the backup with TM but backups and slow
    We can Help Me ?
    Yes, WIFI is slow. If this is your first backup, it will be much faster if you connect to your Time Capsule or Airport Express via an Ethernet Cable.
    Also try the things in item #D2 of the Time Machine - Troubleshooting *User Tip* at the top of this forum.

  • My IMac 2009 with snow Leopard is very slow. What can I do ? I'm french

    My IMac 2009 with snow Leopard is very slow. What can I do ? I'm french

    Patjan73 wrote:
    My IMac 2009 with snow Leopard is very slow. What can I do ? I'm french
    The first two things I recommend is boot from your installer dvd or external bootable drive and repair/verify your drives with Disk Utility (not repair permissions) and do a smc and pram reset.
    Also make sure you have at least 20GB to 25GB free space on your boot volume for OS operations.

  • I update my iphone 4s with iso8 but its very slow can i go back to iso7 ?

    I update my iphone 4s with iso8 but its very slow can i go back to iso7 ?

    Is everything slow?  What apps are slow?
    Try a reboot.
    http://www.wikihow.com/Reboot-an-iPad

  • Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

    Hi,
    I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
    And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
    1. OBIEE 10g to 11g upgrade issues??
    2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
    3. Informatica 8.6.1 to 9.0.1 upgrade issues??
    4. DAC upgrade issues??
    any response for my questions is appreciated.
    Thanks
    Jay.
    Edited by: Jay on Apr 11, 2012 9:11 AM

    HI Jay,
    We cannot explained thread list here, If you get any errors plz post me,will try to help out.
    This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
    http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
    http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
    Award points it is useful.
    Thanks,
    satya

  • Obiee 11g show title along with no results.

    I have a requirment to show no data when there are no results along with the report title at the top.In obiee 11g when i get the no results the title view is dissapearing.Is there any way were i can get both the title along with no results without going to CSS .

    852873 wrote:
    I have a requirment to show no data when there are no results along with the report title at the top.In obiee 11g when i get the no results the title view is dissapearing.Is there any way were i can get both the title along with no results without going to CSS .Check this out:
    http://docs.oracle.com/cd/E14571_01/bi.1111/e10544/analyses.htm#i1010759
    Click on the "Displaying the Results of Analyses" section and then scroll down to "Alerting Users to No Data in the Results of Analyses."
    In the Header field, you can enter the title of your report, then customize your message in the Message field.

  • How to get all parameter names along with their values in stored procedure which is being executed

    Im using sql server 2012, is there any possible way to get all the parameters of a stored procedure along with the values passed to it.
    I need these things to build a xml. I mean this should happen in the procedure which being executed and it should be common for all the procedures.
    For example, let us suppose we have to procedures,
    uspSave, @name='test' @age=20
    uspDelete @id=2
    now in uspSave procedure, i need to get @name, @age and the values 'test', 20 and in uspDelete, i should get @id with value 2.
    For getting the column names, i tried this,
    select parameter_name from information_schema.PARAMETERS where specific_name=OBJECT_NAME(@@procid)
    now is it possible to loop through the result of above query and can we get the values.

    I think  you need running SQL Server Profiler to capture this info even in SQL Server 2012.
    Best Regards,Uri Dimant SQL Server MVP,http://sqlblog.com/blogs/uri_dimant/
    Blog : MS SQL Development and Optimization
    Blog : Large
    scale of database and cleansing

  • Backing up selected folders along with their metadata

    My Podcast folder in the itunes Music folder has grown up to 15 GB and I need to free up some space.
    Is there a way I can just move out a portion of this folder (or any folder for that matter) along with its metadata. and then easily have it back in my library at a later stage.
    And if I move out some podcast series all together, will the subscription remain intact?

    The easiest solution is to move your entire library to a new location, but if you want to do a partial move use either the XML editing or Symbolic linking methods. I've copied below from an earlier (slighty Windows-centric I'm afraid) posting on this topic.
    *Moving your iTunes Music folder*
    OK, so you’re running out of room on your main hard drive for all that music you’ve ripped from your CD’s – it’s time to relocate some or all of the library to another drive, e.g. a nice chunky USB external drive. You could give iTunes total control – see Moving your iTunes Music folder (Mac) - and ask it to "consolidate" your library onto your new drive, letting it rename your files in the process. However I like to be in control, for example I want to keep all my classical & comedy tracks in separate folders and I don’t want my track names truncated. I also don't necessarily want to move all my library to the external drive – just the stuff I play less often so that it's not the end of the world if I've taken the drive into work. You could try and manually delete, move & re-import sections of your library. The downside is that it takes ages and you will lose any related metadata such as play counts, last played, date added, playlist membership etc. Another approach is given here: HOWTO: Move your iTunes music while preserving library data (when you don’t let iTunes manage your music library) but that involves a lot of messing about with XML and when iTunes gets around to rebuilding your library it will probably want to reprocess all the artwork & gapless playback information. Also each of the above methods will probably result in iTunes deciding that your files have "changed" in some way and so need to be resynced to the iPod, wasting yet more time.
    There is an easier way... use symbolic links or junction points. These are little known features of the NTFS & HPFS filing systems that let you take an empty folder and instead of filling it with content you make it point to existing content in another location such as an external drive. Although Mac OS X, Windows XP & Vista all support symbolic links none appear to come with any tools to help you create them so you'll have to grab something from the net. For Windows XP I've plumped for Junction Link Magic but you should explore the concept a little before diving in so you might find another tool that suits you better. Once you've got and tested a linking tool just move a section of your library (or all of it if so inclined) to a new location with enough room for it, create a blank folder to replace the folder you've just moved, then fire up your linking tool to connect the empty folder to the new destination. Once done, as far as iTunes or any other applications are concerned your music is where it always was... however your main data drive should now have loads of extra space. Job done!
    A final word of caution. Don't forget what you've done and start deleting what might appear to be duplicate files. In my case my Comedy folder is now at both D:\My Documents\My Music\Comedy (where iTunes expects to find it) & H:\Music\Comedy (the true physical location) however there is only one set of files and deleting from either apparent location will delete from both. Deleted files from such locations may also be immediately deleted rather than going to the recycle bin from where they could be recovered so a little more thought should be given to deleting files.
    tt2

Maybe you are looking for