In OIF, can we control the letter case of the attributes in attribute stmt.

We are the Identity provider and want to change the value of the attribute in the attribute statement to uppercase before sending to the Service Provider. Is that configurable in OIF?
Edited by: user504421 on Sep 11, 2012 8:19 PM

Hi,
If you use the following parameters
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
you will get the output in the size expected but it will be in the form of a pop up box and a blank screen at the back and user action like cancel etc will take you back to the selection screen.

Similar Messages

How can I control the order of playback on MuVu Mix (USB 2.

What determines the order of playback of music files stored on the MuVu Mix (USB 2.0)? How can I control the order?
Apparently it is not name order. The music titles are prefixed by sequential numbers. But that is not the order that the files play back.
I tried erasing all contents, then copying the files one by one to the MuVo Mix in the order that I want them to play back (name order). But that is not the order that the files play back.
By the way, in both case, I removed the ".dat" file first. (I also tried keeping the ".dat" file, to no avail.)

SSR wrote:
> on the newer MuVos (which I would have thought included the Mix)
> it's filename order. Other than that it's hard to know, but it sounds
> like you ought to contact Support to check.
I did, and they confirmed (very quickly; kudos!) what you and I both expect: the play order is determined by the alphabetical order of the file names. The mistake was mine. I ass-u-me-d that the MSWin folder "Name ^" order was correct. I did not realize that it is not exactly alphabetical when the file name begins with a number (e.g, the track number). I had renumbered songs from a second CD by simply adding 00 to the track number. Thus, songs and 2 of the first CD are played after songs 08 and 09 of the second CD, as they should alphabetically, even though they appear in the order , 2, 08, 09 in the "Name ^" list. Klunk! Mea cupla!

How can I control the Product Category in the Pre-select screen

Dear ,my expert :
   I work in ROS scenario . In my case ,the supplier can select Product Category A, Product Category B,and Product Category C when they filled the data in the registration scren . And the purchaser A just is responsibility for the Product Category A ,and the purchaser B ,C are the same situation .
So ,my question is :
   1,How can I control the Product Category in the Pre-select screen? I mean that the Purchaser A can just select the   Product Category A in the Pre-select screen .
   2,You know the supplier select two category is one BP in the system ,So if the purchaser A accepe the supplier ,the purchaser B will find the status is "accepted ",So the purchaser B will be confused about it .
   SO ,in my case ,any one has the suggestions ,any link welcome .
   Bestregards
alex

Hi Alex,
As per standard SRM solution, this is not supported. Purchasers who accept new suppliers, accept them on the whole and not for any specific product category. There is no such thing as Purchaser being responsible for specific prod category in ROS.
What you could do however is to build a custom workflow to achieve it. You could have category approvers after the purchaser has accepted the supplier. Based on the category provided by the supplier in the reg form, you could route these suppliers to appropriate category approvers.
Regards,
Nikhil

Can I Control the Pulse offset using the Counter Out?

Hello Everyone.
I am trying to generate the Pulse as below;
I have seen and understood an example to generate a pulse waveform "GenDigPulseTrain_Continuous".
However, I can not control the offset of the pulse train.
Although the function gives me "initial delay(The amount of time in seconds to wait before generating the first pulse)",
I can not shift "t_dead" cycle.
/*01.Frequency Control*/
// The units to use to define pulse frequency.
  m_pTaskWrite->COChannels.CreatePulseChannelFrequency(vecstrings[0]/*LPCTSTR counter*/,
   "PWM_C0_CH_HIGH"/*LPCTSTR nameToAssignChannel*/,
   DAQmxCOPulseFrequencyUnitsHertz,
   DAQmxCOPulseIdleStateHigh,
   dDeadTime,
   m_nFncFrequency/*frequency*/,
   prDuty.second/*dutyCycle*/);
  // The units to use to define pulse frequency.
m_pTaskWrite->COChannels.CreatePulseChannelFrequency(vecstrings[1]/*LPCTSTR counter*/,
  "PWM_C0_CH_LOW"/*LPCTSTR nameToAssignChannel*/,
  DAQmxCOPulseFrequencyUnitsHertz,
  DAQmxCOPulseIdleStateLow,
  dDeadTime/**2 + (prDuty.second *dCycleTime)*/,
    m_nFncFrequency/*frequency*/,
  prDuty.second/*dutyCycle*/);
Please let me know how I solve this problem.
Thank you

Dear Zl,
Counting pulses is much easier with the FP-QUAD-510 or FP-CTR-500, but can be done with the FP-AI-110. You can't directly count the pulses with a FP-AI-110, but you can do it in software. Bring in the data by doing a normal read. Then, using shift registers, if the previous voltage is less than .8V (low) and the current voltage is more than 2.5 (high), increase the pulse count. I have attached a program that shows what to do with the data once you bring it in. I took the data from an array outside the while loop, but your data will be brought in one point at a time inside the while loop. One thing to take note of, since Fieldpoint brings in data at 1 kS/s, this will only work with pulses slower than 500 Hz. The farther the duty cycle is away from 50% duty cycle, the slower the signal must be in order to catch the pulses correctly. Please let me know if you have any questions. Have a great day!
Sincerely,
Marni
PS- Please only post question once.
Attachments:
pulsecount.vi ‏22 KB

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

How come the volume of other programs are lowered while one FaceTime? I exchange media with friends and colleagues and I can barely hear anything. There should be a way we can manually control the volume of different programs

How come the volume of other programs are lowered while one FaceTime? I exchange media with friends and colleagues and I can barely hear anything. There should be a way we can manually control the volume of different programs

I own the movies and I want them to stay in my iTunes library basically forever.
But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
iTunes prefs > Store > Show iTunes in the Cloud purchases.
This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
Also see this , -> Download past purchases
and techncially, you don't "own" the movie, You simply have a license to use it.
Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
Actually, no it does not tell you that.
FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
Suggestions here -> http://www.apple.com/feedback/

Can we control the triggering of sender file adapter

Hi,
Can we control the tiggering of Sender file adapter with option of Run OS command before message processing
This option is available in Sender communication channel, what are the limitations of this option?
My actual requirement is to see the target folder whether it is empty or not, if empty then I can trigger the interface.
For this I want to write shell script whihc execute at OS level to check whether the target is empty or not, But the constraint is will this can control the triggering of sender adapter.

Hi Sekhar,
I guess this can help you control the file pick up.
If your shell script works well then using the same you can modify the filename or its extension if the target folder is empty.
Say in the sender file adapter you set the source-filename as "inbound_*.ready". Now when originally the source file is dropped into the source folder (by any other process) let it be named as "inbound_001.pending" and your script will change the file name to "inbound_001.ready" if the target directory is empty. I dont think you need to use the pre processing OS command for this.
Does it make any sense?
Regards,
Suddha

How can I control the workflow in the award the Rfx response

HI,Experts :
I work in SRM 7.0 ,RFx scenario .
In my case ,the supplier submit his RFX response according the RFX ,and the purchaser awards this response .
There are 3 steps workflow for one type RFX response,and 4 steps workflow for another RFX Response .So ,I know I just can use the standard transaction type for the RFX Response .SO ,How can I control the workflow in this case .
Bestregards
Alex

Hi,
If i understand your question correcly, you have to determine the process schema definition dynamically based on the transaction type.. then you can configure the process level ( 3 or 4 ) based the process schema definition..
Saravanan

Can we control the output screen area of alv grid list

Hi All,
can we control the screen area of grid control in alv's , not using ooalv's. By default grid list is displaying in the whole screen, but i want to display this grid list in specific area in output screen , not in full screen, how to set these screen area for this grid control. Please let me know.

Hi,
If you use the following parameters
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
you will get the output in the size expected but it will be in the form of a pop up box and a blank screen at the back and user action like cancel etc will take you back to the selection screen.

Is there a way to automatically control the audio volume on safari? Some streaming video sites (Hulu, in particular), like to try to deafen me with the commercials. And yes, I'm not an idiot, I know that I can manually control the volume.

I've been searching for some way to automatically control the volume, so the commercials on streaming sites (Hulu, for example), don't deafen me. And yes, I am aware that I can manually control the volume with the volume keys on the keyboard or the slider in the menubar.

This really frustrates me, small differences between the apps that shouldn't be there.
I understand you can't change the keyboard shortcuts to be the same/similar, but this is totally different. Let's hope it changes soon.

Can not control the color in JOGL

I am a beginner to use JOGL.
I find that I can not control the color, both background and foreground. The background is always Black, and foreground is always Red.
I use canvas.setBackground(Color),
gl.glColor3*(), trying to change the color. But it does not work.
What is the problem?
Thanks.
Toby

A big help for learning JOGL is reading the Red Book from OpenGL, which can be downloaded in pdf. Since JOGL is almost a direct wrapper, the function calls are identical.
To set the background color, you need to add a GLEventListener to the GLCanvas that you're using. To set the background color, in your init() method for GLEventListener do:
public void init(GLAutoDrawable glad) {
GL gl=glad.getGL();
gl.glClearColor(r,g,b);
or something similar, I'm not on my normal computer so this was all from memory. Check the JOGL API for the exact method name for glClearColor. To change the foreground color, there are a bunch of various methods that are all similar to glColor3f(float r,float g,float b).
Calling this on the GL object in the display() method will set the foreground color and everything drawn that isn't using lighting will use this color.

How can I control the zoom on my mac mouse?

How can I control the zoom function on my mouse? In the middle of working on things my hand will rub the mouse by accident and all of a sudden the context within the screen is large. I have no idea of how to work this feature on my mouse and most times to get it to return to normal, I have to escape out of the work I am performing.

If you are pressing the "Control" button on the Mac keyboard, scrolling up will zoom in and scrolling down will zoom out. You can disable this if it annoys you through System Preferences > Universal Access. If you are using Mountain Lion, it would be System Preferences > Accessibility.
Uncheck the in the "Seeing" or "Zoom" section that says "Use scroll gesture with modifier keys to zoom". It may be slightly different if you have an older OS X version. I have Mountain Lion and am going off of memory on the older versions.

How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.

How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.

There is not now, nor has there ever been a version of flash for any iOS device.
Adobe has abandoned mobile flash, so there never will be.
Browsers like iswifter or photon may work for you, but don't hold your breath.
Check app store for an app of whatever game you want.

How can I control the size of a cell in the GridBagLayout?

Hi,Swing Gurus
I am developing a swing-based program using JBulider5 enterprise.
It seems to me that the GridBagLayout is really a hard nut!
How can I control the size of a cell in the GridBagLayout?
It seems that I cann't control the size of a cell directly.
But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
Thx in advance!
Regards,
Justine

hi,i have not done what you are asking but there are fields like
COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

Can we control the PDF file name that is generated by BI Publisher based on the content in the input PDF

can we control the PDF file name that is generated by BI Publisher based on the content in the input PDF?

No, there isn't. The way you're using the file is not recommended. You
should use a review tracker to avoid getting in the way of one another.

In OIF, can we control the letter case of the attributes in attribute stmt.

Similar Messages

Maybe you are looking for