In OPK8 need to include new list name.

Hi Experts,
In one of my requirment i need to configure a new list names ( LG96 & LK96) in the printer configuration OPK8.
Please advice.
Thanks

I am not sure got your question correctly. But in OPK8 you can just click on icon NEW Entries & create new lists & their complete configuration.
General best practice is to use some existing SAP lists whose configurations nearly meet your requirement & copy into your custom lists. Then do required modifications as needed.
Hope this helps. Else let me know.
Thanks,
Ram

Similar Messages

Need to include new field for RX-only: Financial Tax Register Report

Hi All,
In Report eXchange Designer responsibility > Setup RXi>
Report Name filed > RX-only: Financial Tax Register Report
Here in available filed we have some options when selected to display filed and run the report in Tax Manager only those selected fields are displayed in the output.
Now our client want A filed called Voucher Number (AP invoice voucher num) to be displayed in the report. So please let me know how there is any extendable package, view or any thing that need customization to make that field available in final output.
Thanks in advance.

f

Can I include the FILE NAME when printing from Bridge?

I'm a commercial photographer. I shoot with my camera tethered to a Mac laptop to view images immediately as I shoot. I use Bridge to view these images.
As I shoot, we save the file by product name, and then print proofs immediately. I need to include the File Name on these prints. Is
there a way for me to do this directly from Bridge? If not, can you think of a way using Photoshop? Or anything else? Lightroom?

Guessing you are using Bridge CS4 you could use the Adobe Output module for
this. It is reachable through a seperate workspace in the top menu right
side or the left side top menu the icon most right.
You can create different lay outs as a PDF with this but for you it should
be one per page and select the filename (with or without extension). Just
explore the posibilities. For CS4 you could use the updated Output Module.
If on CS3 you could use the contact sheet script for Photoshop that in
Bridge can be reached by the menu Tools / Photoshop / contactsheet. This
contactsheet script is also usable for CS4, it is on the Goodies install
disk for PSCS4
As I shoot, we save the file by product name, and then print proofs
immediately. I need to include the File Name on these prints. Is
there a way for me to do this directly from Bridge? If not, can you think of a
way using Photoshop? Or anything else? Lightroom?

How to get list name through javascript?

Hi,
I wrote javascript for getting list items but here I'm hard coded list name as "Projects"(my list name). How can I get list name automatically with out hard coding,
Appreciate if anyone help.
Thank you.
function DoLogicalDelete()
var clientContext = null;
var oList = null;
var oListItem = null;
// var lstItmIsDeleted = null;
var itmID = getQuerystring('ID');
clientContext = SP.ClientContext.get_current();
oList = clientContext.get_web().get_lists().getByTitle('Projects');
// var oListItemID = SP.ListOperation.Selection.getSelectedItems(clientContext);
oListItem = oList.getItemById(itmID); // getting ID
clientContext.load(oListItem,"Title", "IsDeleted"); // load items to oListItem
oListItem.set_item('IsDeleted', true);
oListItem.update();
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQuerySucceeded),Function.createDelegate(this, this.onQueryFailed));

Not sure on which context you are executing the code. If you executing this from the list form and trying to get the current list, then you may need to get the list name from the breadcrumb/list title field. Refer to the following posts for more information
http://sharepoint.stackexchange.com/questions/39008/how-to-get-list-name-from-js-object-model-list-name-from-url-problem
http://itrob.be/sharepoint-get-all-lists-names-in-javascript-spservice-and-jquery/
--Cheers

Sharepoint 2007 list error - The '}' character, hexadecimal value 0x7D, cannot be included in a name. Line 1, position 440.

Hi Everyone,
We have a sharepoint 2007 deployment which in general has been fine since it was built.
Version is 12.0.0.6421 (MOSS 2007 SP2 (KB953334 & KB953338))
on a Windows 2003 R2 SP2 server.
We created a list a while back to store information for our servers but for some reason it now has an error.
the symptoms are:
1) Navigating to the list and choosing any view (a few custom views), we can see the data fine
2) Creating new items or modifying existing items brings up:
An unexpected error has occurred.
3) Trying to access the list settings brings up:
An unexpected error has occurred.
4) Using "view all site content" and clicking on the list brings up:
The '}' character, hexadecimal value 0x7D, cannot be included in a name. Line 1, position 440.
I've attempted to search for the error online but the error doesn't bring back anything specific to Sharepoint.
My gut feeling is either a corruption of the list or a user has entered an invalid character in one of the list entries, but I cannot amend the list in any way.
Ordinarily I would advise the user to re-create the list and enter the information from scratch, however this list contains alot of information and is crucial to the server teams documentation.
Does anyone have any ideas on where I should be focusing my search efforts? I did check the logs and couldn't see any obvious entries for this list.
Any assistance would be greatly appreciated.
Cheers,
Carl

Posted this a few weeks back - would appreciate any suggestions?
Thanks,
Carl

How is a distribution list created in 'Mail'? Everyone I need to include is already in my contact list so how do I copy them into a single list which I've created?

How is a distribution list created in 'Mail'? Every address I need to include is already in my 'Contacts', so how do I copy them into my single list?

In Contacts, add a new group, and then add all the desired recipients to the group.
Contacts – Create Mail Group

Create new lists at OPK8

Hello All.
Could you please help me in order to create a new list at OPK8 tcode?
I've tried to do this by using F5 option but system gives me the message "enter a valid value" . Even when I try to create a copy from an existing list.
Do you have any idea of how to solv this.
Thanks in advance.

Hi,
For that need, you can maintain specific forms based on plant and order type, so even though the list is the same, you can call different forms.
I would suggest first spend a few moments with OPK8 to understand the setup, if you face any issues, then do revert.
Also the method of assigning, creating is discussed in this forum, so just do a search with OPK8 & you will get the details.
At the end if you need any specific support do revert, will try to be of the best help possible.
Regards,
Vivek

How may I change the format to enter new contacts? I need to add a business name and would like to change the defaults to work rather than home.

I am entering new contacts into the contact app. I need to add a business name and would like to change the default for phone numbers from home to work. I am entering a large amount of business cards

rcolbroth wrote:
Is there anyway of creatiing a different name for this Folder rather than 2013?
If you are using one of Lightroom's "date-based" folder templates, then the folders are created in accordance with the image capture date, not the date that you happen to import it. If you specifically want to use the import date for your folder names then you probably don't want to use the Lightroom date template, and instead you'll need to setup your folder names manually.
The vast majority of users that use date-based folder naming schemes will use a standard Lightroom template, i.e. based on the much more meaningful image capture date.

Need to include table name,schema name in select output

I need to output the table name and schema name of the current user into a table.. I have tried including
within a select statement..
table_name,
from user_tables
where table_name='mnme';
no rows returned

Hi,
Its in upper case 'MNME'
Best.
EA

New JCo names are not listing in WB Content Administrator

Dear Friends,
I have deployed my WebDynpro application on a landscape where the production system got 4 server services running.
Initially the WD application was using the existing JCo connections. But on the latest deploy I have to use new JCo connections and I made changes.
Problem is, these new JCo connection names are not appearing in WebDynpro Content Administrator and still it displays old JCo connections.
This problem exists with global WD Content Admin. URL as well as with individual server url, except in one server instance where JCos yet to be created.
But when I execute the application with global URL, it is working fine.
Intent is to create and use my new JCo connections for the application which are not listing in WB Content Admin.
Is it require to restart the server services?
Is it possible to solve this problem without restarting the services?
Is there any other way to resolve this problem?
Thanks in advance.
Lakshmikantha

Sorry I can't approach to restart the j2ee service at this movement.
And the application got new JCo name at it's JCO refrences.
Infact the application is working fine with new JCos on development and quality systems.
Problem exists only on production system where it got 4 server instances.
Any hope without restarting services?

I need to change my bluetooth name can someone please help as i`m new to i-phone

Please can someone help me ? i`m new to i-phones an i need to change my bluetooth name, thanks in advance

not sure because like i say i`m new to i-phone an it was boxed an sealed brand new it just kept asking me to do this that an the other lol (mind blowing ) to be honest an i was exited too

Need a query to list all table names

I have more than 500 tables in my database.
'insert_date' & 'update_date' columns are found in more than 100 tables with data type as date.
I need a query to list all table names and 'insert_date' , 'update_date' column's content.
Please Help
Lee1212
Message was edited by:
LEE1212

I have more than 500 tables in my database.
'insert_date' & update_date column is found in more
than 100 tables with data type as date.
I need a query to list all table names and
'insert_date' column's content.What do you mean by "column's content". A table can have many rows. Do you want to display all the distinct value for these columns?
Below is the query to get the tables which has columns insert_Date and update_date
select table_name
from user_tab_columns
where column_name ='INSERT_DATE'
or column_name ='UPDATE_DATE'
/You can write a PL/SQL block to retrive the distinct values of INSERT_DATE for these tables
declare
TYPE ref_cur IS REF CURSOR;
insert_date_cur ref_cur;
lv_insert_date DATE;
cursor tables_list IS
select table_name
from user_tab_columns
where column_name ='INSERT_DATE';
begin
for cur_tables in tables_list
loop
OPEN insert_date_cur for 'SELECT DISTINCT insert_date from '||cur_tables.table_name;
DBMS_OUTPUT.PUT_LINE(cur_tables.table_name);
DBMS_OUTPUT.PUT_LINE('--------------------------------');
LOOP
FETCH insert_date_cur into lv_insert_date;
EXIT WHEN insert_date_cur%NOTFOUND;
DBMS_OUTPUT.PUT_LINE(lv_insert_date);
END LOOP;
CLOSE insert_date_cur;
end loop;
end;I haven't tested this code. There might be some errors. Just posted something to start with for you.

Change of ISP - need to deploy new IP address or DNS name to Active Sync phones

Greetings! We are changing ISP's tomorrow and we JUST finished deploying a bunch of new Galaxy S4's. Before, we were using Blackberrys and the thought never occurred to set up a DNS name for ActiveSync, we were just using the straight IP address. So
it just hit me that, when we switch over tomorrow evening, all the ActiveSync devices will cease to connect. NOT a good thing! Is there a way to push out a DNS name (to replace the IP address), to all the Active Sync clients via a policy update, script or
other mechanism? Otherwise we will have to contact each user and get them to manually update their accounts by entering the new DNS name. If anyone knows a method by which we can do this, please advise and thanks in advance!
Mike
Mike Vain

Hello,
I agree with Ed's suggestion. After you change ISP, please change your DNS entries to the new IP address.
You can also change DNS A record for autodiscover to the new IP address.
The activesync will use autodiscover service to update profile.
Cara Chen
TechNet Community Support

Create New List Item

I am getting an error each time I try to run this code and get the error message "There was a problem submitting your answers. Please try again later."I have looked at this for so long now I am not sure if I am missing something or what. I have referenced SPServices and jquery and it is working correctlyI am trying to make a crossword using some code I found online and I followed it andstill get this error. // Create an object to associate each SharePoint column with the class name used for the input and the user's response for that column
var responses = {
"oneAcross": {
"selector": "one-across",
"column": "OneAcross",
"answer": ""
"oneDown": {
"selector": "one-down",
"column": "OneDown",
"answer": ""
"twoDown": {
"selector": "two-down",
"column": "TwoDown",
"answer": ""
"threeDown": {
"selector": "three-down",
"column": "ThreeDown",
"answer": ""
"fourAcross": {
"selector": "four-across",
"column": "FourAcross",
"answer": ""
// Create the batchCmd variable that will be used to create the new list item
var batchCmd = '<Batch OnError="Continue"><Method ID="1" Cmd="New">';
// Concatenate values of each response input by iterating over the object representing the responses
$.each( responses, function() {
// Cache the current item in the responses object.
var $response = this;
// For each input in the crossword associated with the current response object, get the values and save them in the answer property.
$( '.' + $response.selector ).each( function() {
$response.answer += $( this ).val().toLowerCase();
// Add the response to the batchCmd
batchCmd += '<Field Name="' + $response.column + '"><![CDATA[' + $response.answer + ']]></Field>';//Create a new list item on the destination list using the batchCmd variable
$().SPServices({
operation: "UpdateListItems",
async: true,
webURL: "http://operations.home.blah.com/sites/EIS/SEEIS/SSC/Lists/",
listName: "Crossword",
updates: batchCmd,
completefunc: function( xData, Status ) {
// If the AJAX call could not be completed, alert the user or include your own code to handle errors.
if ( Status !== "success" ) {
alert( "There was a problem submitting your answers. Please try again later." );
else {
// If there was an error creating the list item, alert the user or include your own code to handle errors.
if ( $( xData.responseXML ).find( 'ErrorCode' ).text() !== "0x00000000" ) {
alert( "There was a problem submitting your answers. Please try again later." );
// if the list item was successfully created, alert the user and navigate to the Source parameter in the URL (or to a URL of your choosing).
else {
alert( "Your answers were submitted successfully! Click OK to continue." );
if ( window.location.href.indexOf( "Source=" ) !== -1 ) {
var url = window.location.href.split( "Source=" )[1].split( "&" )[0];
window.location.href = url;
else {
window.location.href = "/";

When I look at the demo on the page it fires the same response as that is part of the error handling because it is a standalone HTML and not on a sharepoint server so I am wondering if something I am missing on the submit.click function or batchcmd.
I included the entire code for it to see if maybe you can see something I am not. My crossword is on a Sharepoint Server
$( '#crossword-submit' ).click( function( event ) {
// If you decide to use a hyperlink instead of a button input, this will prevent
//the hyperlink from actually navigating away from the page or to an anchor.
event.preventDefault();
// Disable the button so the user can't click it again and submit the answers more than once.
$( this ).prop( 'disabled', true );
// Prevent submission if the crossword isn't completed.
if ( $( '#crossword' ).find( 'input' ).filter( function() { return $( this ).val() === ""; }).length !== 0 ) {
alert( "You have left some answers blank. Please complete all answers before submitting." );
$( this ).removeProp( 'disabled' );
return false;
// Confirm that the user wants to submit their answers.
var confirmResponse = confirm( "Are you sure you are ready to submit your answers? Once submitted they cannot be changed.\n\nClick OK to continue or Cancel to review your answers." );
if ( confirmResponse === false ) {
$( this ).removeProp( 'disabled' );
return false;
// Create an object to associate each SharePoint column with the class name used for the input and the user's response for that column
var responses = {
"oneAcross": {
"selector": "one-across",
"column": "OneAcross",
"answer": ""
"oneDown": {
"selector": "one-down",
"column": "OneDown",
"answer": ""
"twoDown": {
"selector": "two-down",
"column": "TwoDown",
"answer": ""
"threeDown": {
"selector": "three-down",
"column": "ThreeDown",
"answer": ""
"fiveDown": {
"selector": "five-down",
"column": "FiveDown",
"answer": ""
"sixDown": {
"selector": "six-down",
"column": "SixDown",
"answer": ""
"sevenDown": {
"selector": "seven-down",
"column": "SevenDown",
"answer": ""
"eightDown": {
"selector": "eight-down",
"column": "EightDown",
"answer": ""
"fourAcross": {
"selector": "four-across",
"column": "FourAcross",
"answer": ""
"nineAcross": {
"selector": "nine-across",
"column": "NineAcross",
"answer": ""
"tenAcross": {
"selector": "ten-across",
"column": "TenAcross",
"answer": ""
"elevenAcross": {
"selector": "eleven-across",
"column": "ElevenAcross",
"answer": ""
"twelveAcross": {
"selector": "twelve-across",
"column": "TwelveAcross",
"answer": ""
// Create the batchCmd variable that will be used to create the new list item
var batchCmd = '<Batch OnError="Continue"><Method ID="1" Cmd="New">';
// Concatenate values of each response input by iterating over the object representing the responses
$.each( responses, function() {
// Cache the current item in the responses object.
var $response = this;
// For each input in the crossword associated with the current response object
//, get the values and save them in the answer property.
$( '.' + $response.selector ).each( function() {
$response.answer += $( this ).val().toLowerCase();
// Add the response to the batchCmd
batchCmd += '<Field Name="' + $response.column + '"><![CDATA[' + $response.answer + ']]></Field>';
// Close the batchCmd variable
batchCmd += '</Method></Batch>';
// Create a new list item on the destination list using the batchCmd variable
$().SPServices({
operation: "UpdateListItems",
async: true,
webURL: "http://operations.homestead.abc.com/sites/EIS/SEEIS/SSC/Lists/",
listName: "Crossword",
updates: batchCmd,
completefunc: function( xData, Status ) {
// If the AJAX call could not be completed, alert the user or include your own code to handle errors.
if ( Status !== "success" ) {
alert( "There was a problem submitting your answers. Please try again later." );
else {
// If there was an error creating the list item, alert the user or include your own code to handle errors.
if ( $( xData.responseXML ).find( 'ErrorCode' ).text() !== "0x00000000" ) {
alert( "There was a problem submitting your answers. Please try again later." );
// if the list item was successfully created, alert the user and navigate
//to the Source parameter in the URL (or to a URL of your choosing).
else {
alert( "Your answers were submitted successfully! Click OK to continue." );
if ( window.location.href.indexOf( "Source=" ) !== -1 ) {
var url = window.location.href.split( "Source=" )[1].split( "&" )[0];
window.location.href = url;
else {
window.location.href = "/";
</script>

Unable to get the SharePoint 2013 List names using Client object model for the input URL

Please can you help with this issue.
We are not able to get the SharePoint 2013 List names using Client object model for the input URL.
What we need is to use default credentials to authenticate user to get only those list which he has access to.
clientContext.Credentials = Net.CredentialCache.DefaultCredentials
But in this case we are getting error saying ‘The remote server returned an error: (401) Unauthorized.’
Instead of passing Default Credentials, if we pass the User credentials using:
clientContext.Credentials = New Net.NetworkCredential("Administrator", "password", "contoso")
It authenticates the user and works fine. Since we are developing a web part, it would not be possible to pass the user credentials. Also, the sample source code works perfectly fine on the SharePoint 2010 environment. We need to get the same functionality
working for SharePoint 2013.
We are also facing the same issue while authenticating PSI(Project Server Interface) Web services for Project Server 2013.
Can you please let us know how we can overcome the above issue? Please let us know if you need any further information from our end on the same.
Sample code is here: http://www.projectsolution.com/Data/Support/MS/SharePointTestApplication.zip
Regards, PJ Mistry (Email: [email protected] | Web: http://www.projectsolution.co.uk | Blog: EPMGuy.com)

Hi Mistry,
I sure that CSOM will authenticate without passing the
"clientContext.Credentials = Net.CredentialCache.DefaultCredentials" by default. It will take the current login user credentials by default. For more details about the CSOM operations refer the below link.
http://msdn.microsoft.com/en-us/library/office/fp179912.aspx
-- Vadivelu B Life with SharePoint

In OPK8 need to include new list name.

Similar Messages

Maybe you are looking for