In oracle 10g is the same Oracle Net Listener than...?

Hi forum members again I'm vey new in oracle server10g, this time I have a doubt about oracle components , that is the same the Oracle Net Listner than the Oracle SQL*Net listener, if is not the same, please tell me the diference
Thanks in advance

SQL*Net has gone through a few minor revisions over the years.. We've seen SQL*Net Version 1, SQL*Net V2, Net8, Oracle Networking and now (in 10g) Oracle Net Services.
It's exactly the same, only different.
Not surprisingly, Oracle actually documents the differences in their documentation which is freely available for all to read.
If you want some information about what's new in Oracle Networking, I encourage you to read the introduction section of the "Oracle® Database Net Services Administrator's Guide (10g Release 2 (10.2))" titled "What's New in Oracle Net Services?"
Reading that will not only give you a better understanding, but also justify the jobs of the technical writers who create over 55,000 pages of information for our use. <g>

Similar Messages

Can we install Oracle 8i and 10g on the same windows server?

I would like to install the Oracle server 8i and 10g on the same windows server? Is this possible.
Forgive me if this question is already asked.
Thanks in advance!
Jay.

WHICH Windows version? (There's more than one). It would be useful to be a little bit more precise (NT,2000,XP,2003, 32/64 bit) .
For NT and 2000 it is possible to have both 8i and 10g, for XP and 2003 there's no support for 8i at all.

Designer 6i and 10g on the same machine?

I have Designer 6i and corresponding repository on my machine.
The problem with 6i I can't save diagramm in HTML format
I believe I can save in HTML format in 10g or other?
Can I install on the same machine 10g designer?
should I configure new repository?
TIA

See my update on your earlier question.
As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

" Starting Oracle Net Listener......." Hangs while installing vm manager

Ive taken all defaults read install guide , checked availability of ports and made sure I have libaio.
I've reinstalled on two separate machines and everytime install fails after I accept defaults. Logs don't show anything. ./oracle-xe configure is the only thing in the log.
If I run this again it fails or hangs in the same place. ?????Im not sure where the netlistener is otherwise Id try to manually install?start ?
"Starting Oracle Net Listener"

I have noticed the same thing on my install where it hangs on starting the listener. BUT. .. If you hit enter while it is hanging it will continue to the next step of starting the db. . It seems like it is waiting for some input but not displaying that on the screen. I would not suspect any input from a start listener. .This is my experience. Any others see this?

9i and 10g in the same nodes

Hi.
I would like to know if it's possible to have two database in different versions (9i and 10g) in the same nodes.
In this case, I suppose that I have to install the tow clusterware, one for 9i and another one for 10g, haven't I?
Thanks!

Hi,
both your assumptions are correct.
You can have a 9i RAC database and a 10g one both in the same cluster. However, you would need to have 10g Clusterware and another cluster software for the 9i RAC. On Linux and Windows Oracle would use the Oracle Cluster Manager (CM) for the 9i RAC, on all other platforms you would need to get a third party cluster software for the 9i RAC database, since the 10g Clusterware cannot serve as the underlying cluster software for the 9i RAC database. Nevertheless, the 10g Clusterware GSD would be used to manage the 9i RAC database in those combinations.
Thanks.

Forms 6i and developer 10g on the same machine

Can i have forms 6i and developer 10g on the same machine

Jacob,
Were you installing any patches to the Forms 6i?? I think your problem was a mix up in the environmental variables.
multiple versions of the same Oracle product CAN* be installed successfully on the same machine, it has been done by many.
Do not generalize one experience, since you are working on VMware, try them on one, it's easy to revert to a snapshot ;)
Install Forms 6i first patch it configure it and restart your machine and install DS 10g, On this machine I have Forms 6i and DS 10g installed at this same moment, and it's been working fine for that last 2 years.
Tony

Failed to start Oracle Net Listener using

hi
I ' trying to configure oracle 10g in ubuntu machine. I got the following errors like
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus
when ever i try to start oracle,i have got above issue

ya .... i hav found listener.log file.
Also when i try to run this cmd # sqlplus / as sysdba
i got following error like
Error 46 initializing SQL*Plus
HTTP proxy setting has incorrect value
SP2-1502: The HTTP proxy server specified by http_proxy is not accessible
also when i stop the listener and try try to restart it again ....i got error message like
Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
NL-00280: error creating log stream /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
NL-00278: cannot open log file
SNL-00016: snlfohd: error opening file
Linux Error: 13: Permission denied
Listener failed to start. See the error message(s) above...

Failed to start Oracle Net Listener

Hi ,
can any body help me regarding failing of listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
iam using Fedore core4 installing oracle10g Express editon ,on standalone system,Below are the logs
sqlplus system
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 31 13:21:39 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Enter user-name:
/etc/init.d/oracle-xe restart
Shutting down Oracle Database 10g Express Edition Instance.
Stopping Oracle Net Listener.
Starting Oracle Net Listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
[root@localhost ~]#
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 31-AUG-2009 13:26:27
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 11: Resource temporarily unavailable
Listener failed to start. See the error message(s) above...
Please help

I need help please:
I have installed Oracle 10g Express Edition without struggles ( Little curious about the fact
that the directory /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/log/ is empty).
% /etc/init.d/oracle-xe configure --> worked good without default settings.
% /etc/init.d/oracle-xe start --> is silent : No verbose or messages in term.
I can't connect to server http://localhost:8080/htmldb or http://localhost:8080/apex.
I uninstalled and re-installed Oracle 10g... Now the command:
% /etc/init.d/oracle-xe configure --> Oracle is already configured.
But the connection to the server always fails.
My environment has all the following:
% uname -r
2.6.30.5-43.fc11.i686.PAE
% echo $ORACLE_HOME
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
% echo $ORACLE_SID
XE
% echo $PATH
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/sbin.....
BUT I also had the responses:
% /etc/init.d/oracle-xe restart
Shutting down Oracle Database 10g Express Edition Instance.
Stopping Oracle Net Listener.
Starting Oracle Net Listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
%sqlplus
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
% /etc/init.d/oracle-xe status
/bin/su: user oracle does not exist
% lsnrctl start { Messages below are my translations into english, sorry ;-) }
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 21-FEB.-2010 18:31:24
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Launch /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: Please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
NL-00280: Erreur de création de la chaîne de journalisation /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
NL-00278: Impossible to open journalisation file
SNL-00016: snlfohd : File opening error
Listening process failure. Read error messages above...
I wish someone here gives some tips (with the commands, I am an apprentice); I dont know
where to begin my checks.
Thx.

Can I labled the same song to more than one albums? As you know, some songs are repeated in different albums.

Can I labled the same song to more than one albums? As you know, some songs are repeated in different albums.

You can make a copy of an existing song, then change the album, artwork and track number details. You cannot make the same physical file show up in two different albums.
tt2

Is possible to execute the same executable vi more than 1 time (like notepad, for example)?

I have a Labview executable file that use serial ports to communicate with other devices. I need to execute the same "file.exe" more than 1 time, to control different devices simultaneously. When I double click on an executable been executed (from windows explorer), the file under execution comes to front. Is possible to execute the same file more than 1 time (like notepad, for example)?

Not the answer you are looking for I know..but still: Copying the application to another location is one possibility...if it has a different path it will execute separately.
(OR - build control of multiple devices into one and the same application... If you do not want to redesign the code to handle multiple instruments in the same VIs, you could clone the VIs within the same application...)
MTO

Can we copy the same quotation to more than one sales order?

Can we copy the same quotation to more than one sales order?is it posibble.......pls reply

Hi vepa venkat suhas.,
If the quotation quantity is 100,with reference to quotaion if you raise a sales order for 100 materials then you cannot raise other sales order with reference to the quotation.untill your quatity of 100 in quotation is finished you can raise a sales order
REWARD if helpfull
Thanks & Regards
Narayana

PSE 8 for windows, does it have the same smart brush tool than for MAC version?

Good Morning
PSE 8 for windows, does it have the same smart brush tool than for MAC version?

Yes, it does.
Thanks,

MAY I USE THE SAME KEYNOTE IN IMAC THAN IN IPAD?

MAY I USE THE SAME KEYNOTE IN IMAC THAN IN IPAD?

Welcome to Apple Support Communities
Your iMac uses OS X and the iPad uses iOS, different operating systems that use different applications. In this case, Keynote has got a OS X version and a iOS version, so you have to purchase Keynote for OS X in order to use it with your computer, even if you have it for your iPad

How to use Forms 5 and DevSuite 10g in the same machine

Hello everybody,
I have installed forms 5 and IDS 10g in one machine and both the versions of the forms were working simultaneously. Now I have un-installed both the versions of the forms and re-installed in the same machine. Installation was successful. but I am not able to connect to the database in forms 5. It shows TNS could not resolve service name. TNS is created in both the versions with same name as well as different name. The IDS is working fine. Please help.
Thanks and regards
Sukanta sarkar

Sukanto,
What error are you getting? One potential problem you will have with more than one version of Oracle Dev Suite installed is keeping the TNSNAMES.ORA synchronized. I've found the easiest solution to this problem is to add the TNS_ADMIN registry key to each Oracle Home so I can share a single copy of the TNSNAMES.ORA file. You can add this entry by starting the Window Registry editor (regedt32.exe or regedit.exe) and navigate to the following registry hive:
HKEY_LOCAL_MACHINE => SOFTWARE => ORACLE => HOME? (where ? represents the number of the Oracle Home, eg., 0-9).
In your example, Forms 5 should be in HOME0 and IDS 10g should be in HOME1. Open each home and add a new "String Value" and name it: TNS_ADMIN. After you have added the new String Value entry, edit the String Value and enter the path to the copy of your TNSNAMES.ORA that is working. Then do the same thing with HOME1 and exit the Registry. You should be able to connect to your database with Forms 5 and IDS 10g. Normally, changes to the registry do not require you to reboot your computer, but I have seen where this is necessary - though not very often.
Note: Always ensure you have a BACKUP of the Windows Registry before you make any changes. If you uncomfortable modifying the Windows Regisitry, then I don't recommend you make this change.
Hope this helps.
Craig...

I have a e printer and thee printer is on the same wifi net work as the iPad, when I select print from the iPad the response is no printers. I can successfully email from my iPad to the printer. How can I make my iPad recognize the printer?

I have an e printer and the printer is on the same network as the iPad. When I attempt to print from the iPad I get a message no printers available. How can I get my iPad to recognize the e printer?

This printer has worked for me with out fail at my house. I am traveling in an RV and am at the mercy of the RV Wifi. I do not have access to the router. The printer has been recycled a number of times as well as the Ipad. The printer is set up and has access to the wifi. It seems to me that the Ipad and Iphone are not recognizing the connection with the e printer. I was hoping there was some adjustment that could be made to the Ipad and Iphone. I can email to the printer from both gadgets. I will try to recycle the devices again.

In oracle 10g is the same Oracle Net Listener than...?

Similar Messages

Maybe you are looking for