In Oracle 10g,nmupm.exe runs at 100% CPU usages

Hi There this is Bal Mukund Sharma from Computer Associates,HYD.I have recently installed Oracle 10g on windows 2000 server with 1 GB RAM,i have observed that nmpsupm.exe which is under the bin directory under c:\oracle\product\10.1.0\Db_1\nmupm.exe.is consuming all CPU resources.
when i set all Oracle services to manual and restarted the machine then it shows normal CPU usages. Can you please suggest something regarding this.
Regards
Mukund.

This is a known issue, see here
Re: 10g Db Windows 2000 NMUPM 100% CPU

Similar Messages

The plugin-container.exe is using 100% cpu usage???

After I open a few different pages or tabs within the pages, the plugin-container.exe max's my cpu usage and the system hangs horribly. It comes back and then hangs again. The plugin-container is reasonable new, because I don't recall seeing it in the Task Manager. Is there a way to fix this?? I know it's related to some apple piece of garbage software that I could totally do without if that helps.
Thanks

Plugin-container was introduced in Firefox 3.6.4 to run certain plugins in isolation from the browser, so that when an offending plugin crashes, it does not crash the entire browser, just the tab with the offending plugin. There is information about plugin-container and a method to disable plugin-container in the following article: http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
If you disable plugin-container, your entire browser will crash if a plugin crashes. If you choose to disable plugin-container, restart Firefox to be sure that plugin-container closes; once started, plugin-container remains open until you restart Firefox.

Safari causes my computer to run at 100% CPU Usage!

For the past few days Safari has been causing my CPU to run at high rates. This basically causes me not to be able to much while Safari drags and loads pages. I need a solution to this. I tried resetting Safari but that didn't work. Please help. Thank You.

My PC runs at high rates too. And I too like to use iTunes at the same time I use Safari.
And there's no quick solution to this...at least not yet. But here are few tips and tricks that you can apply to get this thing half solved.
1. First of all, if you don't intended to watch images while browsing, You can turn it off...Simply by going to 'Edit> Preferences> Apperance (Tab)' and from there deselect ' Display images when the page opens'
2. Secondly, Don't open too much tabs if it's not needed.
3. Thirdly, if you're using Safari for a few hours. Just try to close the whole window time to time. And after reopening get back to the last session (View) by selecting History> Reopen all windows from last session'
This will probably help you. Btw, these tricks are exclusives from me. Happy Surfing buddy!

Crystalras.exe consuming 100% CPU usage

Hi everyone,
When we try to open an instance of one of our Crystal reports from InfoView, the crystalras.exe process runs at 100% CPU usage and the report never shows up. After a few minutes, we get the following message:
The request timed out because there has been no reply from the server for 600,000 milliseconds.
Does anyone know where the problem could come from? Could this be because the report is retrieving too much data?
Thanks in advance for any help.

Dear Both,
I traced the RAS server as suggested by Tim and obtained a log that - I have to admit - is quite difficult for me to understand. Could I send it to one of you for examination? Thanks in advance.
Ted, please find below my answers to your questions:
Just to close out possible data source issues, are the reports going against Business Views or Universes?
The report is based on Business Views.
Do you have Processing Extensions specified for the reports?
Sorry but what are Processing Extensions?
Also, when you checked in the Crystal Reports Designer, was it Designer installed on the same machine where the page server and RAS server is running?
Yes, it is installed on the same machine.
Also, since it affects both Page Server and RAS, it may require CRPE traces to get to the bottom of this (CRPE - 'creepy' - is the CR engine used by both the Page and RAS server).
I will certainly open a case with SAP to have them help me on that.
Thank you both for your help. It is very appreciated.

Oracle.exe is consuming 100% cpu o windows

Hi,
We have 6 oracle 10g database on windows box and from task manager we are able to see oracle.exe is consuming 100% cpu
Need to know this oracle.exe belongs to which database and can i get the sql for this process
Thanks

On my Vista PC, I find that the easiest way to identify which instance an oracle.exe is, is the task manager. On the Processes tab, right-click the oracle.exe and then click Go To Service(s) and that takes me to the OracleServiceORCL or whichever insance it is.
I'm sure there is a better way that a Windows person could tell us about. Then having identified the instance, it is just normal tuning from there.

Two nalagent.exe processes w/ 100% cpu on App Launcher close

Hello. We are wondering if nalagent.exe is supposed to be running twice as it does not appear to be this way on all workstations. One nalagent.exe process is running under NT AUTHORITY\SYSTEM, and the other nalagent.exe process is running under the username.
Reason we are asking is because the one running under the username consumes 100% cpu immediately after closing the Application Launcher Window running on the desktop. Upon closing the Application Launcher, the AUTHORITY\SYSTEM nalagent.exe process closes, and the user nalagent.exe process remains and instantly spikes to 100% indefinitely (unless you kill the process in the task manager).
Using Sysinternals Process Monitor reveals that nalagent.exe is constantly scanning for the following nonexistent registry key: [HKEY_CURRENT_USER\Software\NetWare\NAL\1.0\Process Management]. These registry lookups appear to be what is causing the 100% cpu usage, but why? Creating the Process Management key does not eliminate the lookups.
This issue is possibly related to another 100% cpu bug we experienced with a "save icons" feature being stored under the [HKEY_CURRENT_USER\Software\NetWare\NAL\1.0\Links] registry key. We followed the suggestion of deleting the Links key on logon in the following post and this seems to prevent nalagent.exe from automatically starting up at 100% cpu. Our current issue is only when closing the Application Launcher which starts the 100% cpu usage.
http://forums.novell.com/novell-prod...7-sp1-hp1.html
We have considered preventing the Application Launcher from being closed but there appears to be an underlying problem we would like to understand further. Thank you for any information.
Jason

jczen,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Emagent runs at 100% cpu after update to CPU #5225798

good day all ...
we updated to patch 5225798 today on our 10g2 system and now emagent runs at 100% cpu:
top
top - 16:30:39 up 50 days, 2:56, 6 users, load average: 1.00, 1.00, 1.00
Tasks: 174 total, 2 running, 172 sleeping, 0 stopped, 0 zombie
Cpu(s): 25.5% us, 24.5% sy, 0.0% ni, 49.9% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 8143004k total, 2928336k used, 5214668k free, 250212k buffers
Swap: 8514440k total, 3848k used, 8510592k free, 1948680k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4144 oracle 25 0 73052 10m 5420 R 99.6 0.1 49:58.40 emagent
the database is 10.2.0.1.0. any idea what is up with this? the emagent.log file has very little in it:
cat emagent.log
2006-08-31 15:40:29 Thread-16384 Starting Agent 10.1.0.4.1 from /opt/oracle/product/10gR2 (00701)
2006-08-31 15:41:30 Thread-16384 target {prod, oracle_database} is broken: cannot compute dynamic properties in time. (00155)
2006-08-31 15:41:30 Thread-16384 EMAgent started successfully (00702)

hmmm ... apparently no way to attache a file with oracle's forum software. anyway, here is the emagent.trc.
cat emagent.trc
2006-08-31 15:40:29 Thread-16384 WARN command: Job Subsystem Timeout set at 600 seconds
2006-08-31 15:40:29 Thread-16384 WARN upload: Upload manager has no Failure script: disabled
2006-08-31 15:40:29 Thread-16384 WARN upload: Recovering left over xml files in upload directory
2006-08-31 15:40:29 Thread-16384 WARN upload: Recovered 57 left over xml files in upload directory
2006-08-31 15:40:30 Thread-16384 WARN metadata: Metric Disk_Path does not have any data columns
2006-08-31 15:40:30 Thread-16384 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2006-08-31 15:41:30 Thread-16384 ERROR TargetManager: TIMEOUT when compute dynamic properties for target prod
2006-08-31 15:41:30 Thread-16384 ERROR TargetManager: target {prod, oracle_database} is broken: cannot compute dynamic properties in time.
2006-08-31 15:41:30 Thread-16384 WARN collector: the column name DiskActivityavwait in this condition does not exist
2006-08-31 15:41:30 Thread-180231 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
2006-09-01 03:42:38 Thread-29982743 ERROR scheduler: Collection oracle_emd:chinstrap.ornl.gov:3938:Response has not finished in 721 minutes (allowed: 720).
Exiting agent.
2006-09-01 03:42:38 Thread-29982743 ERROR : Signalled to Exit with status 3
2006-09-01 03:42:38 Thread-16384 ERROR main: EMAgent abnormal terminating
2006-09-01 03:42:59 Thread-16384 WARN command: Job Subsystem Timeout set at 600 seconds
2006-09-01 03:42:59 Thread-16384 WARN upload: Upload manager has no Failure script: disabled
2006-09-01 03:42:59 Thread-16384 WARN upload: Recovering left over xml files in upload directory
2006-09-01 03:42:59 Thread-16384 WARN upload: Recovered 60 left over xml files in upload directory
2006-09-01 03:42:59 Thread-16384 WARN metadata: Metric Disk_Path does not have any data columns
2006-09-01 03:42:59 Thread-16384 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2006-09-01 03:44:00 Thread-16384 ERROR TargetManager: TIMEOUT when compute dynamic properties for target prod
2006-09-01 03:44:00 Thread-16384 ERROR TargetManager: target {prod, oracle_database} is broken: cannot compute dynamic properties in time.
2006-09-01 03:44:00 Thread-16384 WARN collector: the column name DiskActivityavwait in this condition does not exist
2006-09-01 03:44:00 Thread-163845 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.

Run program in 100% cpu usage

hi all,
does any body know how to set the java program to utilize 100% cpu usage? thanks!

class Empty implements Runnable {
    Empty() {}
    public void run() {
        while(true) {}
    public static void main(String[] arg) {
        new Thread(new Empty()).start();
        new Thread(new Empty()).start();
        new Thread(new Empty()).start();
        new Thread(new Empty()).start();
}Not sure why you would want to do this though?

Microsoft.Exchange.AddressBook.Service.exe 100% CPU Usage

Hi,
We have an exchange server 2010 and the Microsoft.Exchange.AddressBook.Service.exe used 100% CPU Usage suddenly. However, after rebooting the server, the CPU Usage of the above .exe is back to normal. Client cannot connect to the exchange server during
the high CPU Usage of the above .exe.
Any ideas for the above problems? Thank You.

Hi
Microsoft.Exchange.AddressBook.Service.exe is related to OAB function.
Maybe mobile or client fails to download will cause this problem.
What was the fix for this?

My laptop (win7 2ghz, 1gig) has 100% cpu usage with itunes installed (even when not running itunes) since the upgrade. i had to uninstall. tried installing but still the same problem. my daughter wants the new ipad, but this is a serious problem.

when itunes upgraded my laptop went to 100% cpu usage. only solution was uninstall. have tried itunes again as my daughter wants the new ipad. still same problem tho so not keen to spend £400 on new pad without pc support. anyone help? (ps been using ipod touches 1 and 2, been great source of pleasure for my two girls, but cant sync them, so using the little shuffles for music, syncing to an old version of itunes on an old netbook - had the sense to switch off upgrades when the new version went wrong)

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

MobileClient.exe holds 100% CPU usage in Citrix

Hi
We have successfully got Mobile Sales 5.0 SP11 working on Citrix but unfortunately, as soon as we have more than 10 people working on it, the application hangs with 100% CPU usage
This server has 4 CPU's and should not max out with so few users.
The infrastructure is set out with the application and the database sitting on different virtual servers with a gigabit connection between them.
The locking point always seems to be on the application server.
Any ideas?
James

Another question:
How did you get it work?
I want to do this for CRM7.0 and I don't know how...
Thank you in advance
Simone

DotMac Translator 100% CPU usage

During the last few weeks I have a process called dotMac translator running and it's taking 100% CPU usage, I can kill the process off but it just comes back after about 10 minutes.
Does anybody have any ideas on what's causing this and how to fix it.
Thanks
MacBook Mac OS X (10.4.10)

run the 'top' utility and see what the processes are. You will certainly see some oracle procs in the list. can you post back the output here so we can review it?
Also run the command vmstat 10 130 whilst the cpu is at 100% and post back.
rgds
alan

Server 2012 R2 100% cpu usage when using search

Hi all!
We are experiencing issues with the built in search in WS 2012R2 (Win+Q). Upon starting to type, the explorer.exe process peaks and stays at 100% until typing is done and the search is complete. It also can't keep up with typing and hangs after
a few keystrokes. We have done tests on 2012 R2, 2012 and 2008 R2 running as VMs with 1 cpu. The tests performed have been run on a host running only the test VM with underlying 2x8 core cpus, SSD, SAN storage and 256GB RAM. Also, we have tested
both Hyper-V and VMware ESXi 5.0. We see that if we add another CPU to the guest it alleviates the keystroke lagging, but the explorer.exe still consumes 100% cpu.
When the same tests are run on a physical machine (approx. same specs as the virtualization hosts) the cpu usage reaches 15-20% on one of the physical sockets (numa node). Totally negligible, but still a high number.
We are afraid of service impact and are keen to know if anyone else is experiencing the same? Maybe someone has a fix?

Hi TrondWH,
Thanks for contacting Microsoft.
Currently, would you please try cleaning boot the server and test how the issue goes. Cleaning boot can exclude some third-party application affect. Following are the detailed steps about clean boot:
Log on to the computer by using an account that has administrator rights.
Click Start, type msconfig.exe in the Start Search box, and then press ENTER to start the
System Configuration Utility.
On the General tab, click Selective Startup, and then click to clear the Load startup items check box. (The Use Original Boot.ini check box is unavailable.)
On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.
Click OK, Choose Don’t show this message again and then click Restart.
Please check if the issue is still the same.
Please let me know the result.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

100% CPU usage with XP Cooler from PCAlert4

Any idea why I would be running 100% cpu usage when running XP Cooler from PCAlert4? I noticed PC was sluggish when running it so CTRL+ALT+DEL and under performance is 100% CPU with 245MB Ram Usage. No other TSR's running - several application but under 10% CPU usage without PCAlert and XP Cooler.
I was also wondering if anyone had any ideas on the video? I have the K7N2G with 768MB DDR PC 2100 (3x256) XP2200+ 266FSB running 1804MHz - Maxtor 30GB 7200RPM - 350W PSU (raidmax - yea yea I know, dont say a word though LOL) on board video and here is the problem - graphics are great, but they get choppy - running NFS HotPursuit 2 at 32bit 800x600 (doesnt seem to matter even when running 16bit 640x480still does it.) what setting am I missing? Thanks in advance.

Deathstalker (Richard),
I did what you suggest in memory management and also changed out the mem on the board - it did make a difference, not as much as I had hoped, but it did.
Raven,
I have used Fraps in the past, forgot about it, but went ahead and downloaded it to get a better look.
To the Both of you,
Thanks so much for your replies, sometimes it just takes someone outside looking in to see the things overlooked. But I went ahead and also ran all of the latest updates for the board (semi new system and I only installed with the CD that came with the Mobo) and everything is running better than expected. Thanks again for your thoughts - keep 'em flowin, it's amazing whom we could help. Take care.
Don

100% CPU usage by iCal

For some reason my iCal application uses 100% of CPU. What can I do to avoid it?

I had a similar problem with iTunes.
Here's the link to what fixed my problem immediately. Please note: my problem was resolved following just the three steps pasted below. The original link has additional steps that may be necessary, although I did not employ them, and my problem of 100% CPU USAGE is gone!!! Thank God!
URL source: http://www.hotcomm.com/faq/FAQ_ResetWinsock.asp
Good Luck
Copyright (c) 2009 1stWorks Corporation. All rights reserved.
This article gives instructions for resetting Winsock on Windows XP and Windows Vista:
Reset Winsock (Vista)
To reset Winsock in Vista:
1.Click the Windows Start button.
2. Type Cmd in the Start Search text box and press Ctrl-Shift-Enter (keyboard shortcut to run Command Prompt as Administrator). Click Continue to allow elevation request.
3. Type netsh winsock reset in the Command Prompt shell, and then press the Enter key.
URL source: http://www.hotcomm.com/faq/FAQ_ResetWinsock.asp

In Oracle 10g,nmupm.exe runs at 100% CPU usages

Similar Messages

Maybe you are looking for