In Oracle Enterprise Linux (OEL) not able to redirect pvscan output.

Hi,
I'm not able to redirect output of ovscan and vgscan commands to a file in Oracle Enterprise Linux.
Please suggest something.
Thanks
Mayank

Thanks Paul for your valuable replies.
Well i'm using OEL 5.1(Oracle Enterprise Linux) 32 bit version.
The commands i used were:
# pvscan 1>output.txt 2>&1
# vgscan 1>output.txt 2>&1
In both cases output.txt remains blank.But when I ran command
# ls 1>output.txt 2>&1
output.txt has list of files in it.
Also in case of RHEL (Redhat Enterprise Linux), for both commands vgscan and pvscan output is getting redirected to the output.txt
So the problem is with OEL only. Please suggest something.

Similar Messages

Diff between oracle linux and oracle enterprise linux?

hi all,
i am new to this flavor of Linux. I know oracle linux has red hat source, but i am confused about the difference betweek oracle linux which comes in versions 4 (upto update 8) and 5 (latest update being 5).
i need to install oracle enterprise linux at a client place, so i gota know the difference.
Should i be installing oracle Linux first and then run the rpm of "Unbreakable Enterprise Kernel"? or is the "Unbreakable Enterprise Kernel" only for customers who require this kernal on oracle linux update 5 x86_64?
thanks

waldorfm wrote:
From what I understand Oracle Enterprise Linux (OEL) is a rebranded version of Red hat Enterprise Linux (RHEL).
Oracle Linux (OL) is OEL plus Oracle optimization and custom, newer kernel. OL with Oracle "Unbreakable Enterprise Kernel" is available as x86_64 only and was introduced based on OEL or RHEL 5.5.
You can install OEL 5.4 and easily upgrade to OEL 5.5, PMFJI, but can you point me to docs on how to make that upgrade? The timing of this msg on the forum was exquisite, as I started looking at that just today. I have an OEL 5.4 installation and would much rather upgrade to 5.5 than to have to rebuild from scratch.
I did a yum install kernel with the 5.5 version of the public-yum-el5.repo. That went without a hitch and now reports "2.6.32-100.0.19.el5 #1" where I was 2.6.18-164.el5, but I also see
[root@myserver ~]# uname -a
Linux myserver 2.6.32-100.0.19.el5 #1 SMP Fri Sep 17 17:51:41 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
[root@myserver ~]# cat /etc/enterprise-release
Enterprise Linux Enterprise Linux Server release 5.4 (Carthage)
[root@myserver ~]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.4 (Tikanga)Bottom line is that I am charged with updating the kernel to a 2.6 version newer than 19 Sep, or applying a patch for the compat_alloc_user_space() function, and am not sure exactly how to proceed from here.
if you like or start to install from version 5.5, and then install OL 5.5 by downloading the Oracle public yum repository and follow the instructions at http://public-yum.oracle.com

Oracle Enterprise Linux on Dell

Hi
I need to know on which Dell Servers Oracle Enterprise Linux will not install.
Can you please let me know if there are any issues installing Oracle Enterprise Linux on
Dell(TM) PowerEdge(TM) R710 Rack Mount Server on
-Intel(R) Quad Core E5504 Xeon(R) CPU 2.0GHz
Strangely i am being told that we can install Redhat 5.2 on it but not Oracle Enterprise Linux
Kindly advise
Thanks a lot
Cyril

We have a rack of Dell R710s (6 servers for a 5 node RAC and 1 for OEM). All of them have OEL 5.4 installed on them. We have had no problems running OEL on these systems until we try to initialize IPMI on them following some instructions our DBA got from Oracle. Looking at other non-Oracle documentation for IPMI, we find the same initialization commands so there is nothing specific to Oracle that is failing here.
Except for our problem with IPMI, these boxes work great with OEL.

On which port xwindows run in Oracle enterprise Linux

Hi,
What is the port number for xwindows on Oracle enterprise Linux (OEL)5.3.
We need port# to connect to OEL Server through xwindows software tightvnc.
Regards
Sridhar Nalla

A sidenote: it's x window or x, windows is a software product from a certain company in redmond, WA.
Also: on unix/linux it's 5801 (access via http/browser using an applet) and 5901 (access via client/native vnc protocol). Only on windows 5800/5900 (vnc port 0) is used.

ORACLE_HOME_LISTNER is not SET dbstart error Oracle Enterprise Linux

ORACLE_HOME_LISTNER is not SET dbstart error Oracle Enterprise Linux
Hallo!I am a newbie in Oracle 10g having installed Oracle 10g in Oracle Enterprise Linux version 4 update 7.
I am trying to automate the startup of the Listener,Database,Enterprise Manager and isqlplus during boot.
I have tried running the dbstart script but an error resulted.After research,I found out that I am supposed to edit line 78 of the dbstart script from
ORACLE_HOME_LISTNER=/ade/vikrkuma_new/oracle
To
ORACLE_HOME_LISTNER=$ORACLE_HOME
Even after this,when I run the dbstart script,I receive the error below.
[root@joey-oel ~]# cd /u01/app/oracle/product/10.2.0/db/bin/
[root@joey-oel bin]# ./dbstart
ORACLE_HOME_LISTNER is not SET, unable to auto-start Oracle Net Listener
Processing Database instance "orcl": log file /u01/app/oracle/product/10.2.0/db/startup.log
When I view the log file startup.log,the information is as below
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 9 21:20:33 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> ERROR:
ORA-12546: TNS:permission denied
SQL> ORA-12546: TNS:permission denied
SQL>
./dbstart: Database instance "orcl" warm started
./dbstart: Starting up database "orcl"
Sat Aug 14 15:30:25 EAT 2010
How do I resolve this?
Thanks.

The results of the env | sort command is as below
[oracle@joey-oel ~]$ env | sort
_=/bin/env
EDITOR=gedit
G_BROKEN_FILENAMES=1
HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=joey-oel.com
INPUTRC=/etc/inputrc
KDEDIR=/usr
LANG=en_US.UTF-8
LD_LIBRARY_PATH=/usr/lib:/usr/X11R6/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
MAIL=/var/spool/mail/oracle
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/10.2.0/db
ORACLE_HOSTNAME=joey-oel.com
ORACLE_SID=orcl
PATH=/u01/app/oracle/product/10.2.0/db/bin:/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/oracle/bin
PWD=/home/oracle
QTDIR=/usr/lib/qt-3.3
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
TERM=vt100
TMPDIR=/tmp
TMP=/tmp
USER=oracle
I am trying to run the dbstart as the oracle user.When I try doing this as below
[oracle@joey-oel ~]$ $ORACLE_HOME/bin/dbstart $ORACLE_HOME
chmod: changing permissions of `/u01/app/oracle/product/10.2.0/db/startup.log': Operation not permitted
Processing Database instance "orcl": log file /u01/app/oracle/product/10.2.0/db/startup.log
Even when I try changing the permissions of startup.log as below,
chmod 777 startup.log
the error still appears.

Oracle Enterprise Linux 5.4 32bit is not available in oracle edelivery.

now, Oracle Enterprise Linux 5.4 32bit not in oracle edelivery. the zip file have no speed. but the new release is normal.
From where can i download it. thank you!

Hi,
The Oracle Enterprise Linux 5.4 is in oracle edelivry in URL with a file .zip.
- Select a Product Pack: Oracle Linux
- Platform: x86 32 bits
Then, choose Oracle Linux Release 5 Update 4 Media Pack for x86 (32bit)
- DownLoad
- Decompress and you find the Enterprise-R5-U4-Server-i386-dvd.iso
an enjoy you self
I hope this can help you
Best Regards

Sound not working in Sanray server 5.1 in Oracle Enterprise Linux 5.6

Hi,
I am trying to get the sound working in a sunray server running in linux. I probe that the $AUDIODEV is working fine with the following command:
# /usr/share/sounds/phone.wav > $AUDIODEV
But no application seems to use that device, I also verify the LD_PRELOAD variable and is OK.
I have been searching in the web and it seems to be a issue with the ALSA and OSS. The Linux environment use ALSA and everything is configure to use ALSA, but Sunray server use OSS and that is the pr oblem..... I found that it may be solved recompiling a esound RPM to disable ALSA and to enable OSS but I do not know how to do that in Oracle Enterprise Linux.
Does anyone knows about this issue?
Thanks in advance.
Regards.
Marco

I don't know if this will help but I'm posting it anyways, because it worked for me.
I called into apple support and explained my problem.
First thing he had me do was shut down my computer, unplug everything, take the battery out (i have a macbook pro) then with the battery out hold down the power button for "5 to 8 seconds".
After that I put the battery back in, plug the power cord and the tablet in, turn on the computer...
tablet still doesn't work right, but that's not to say that didn't help.
So I go to the applications folder, go to the pen tablet folder, and open up the file "Remove Pen Tablet".
First I do "Remove all Preference files"
than I do "Remove Tablet Software"
I restart my computer, open up the wacom driver that I downloaded from wacom's website. run the installation. And now my tablet is working just like it should.
I don't know if I'll have the problem where I'm going to have to reinstall the driver after every reboot, but as of now it's good.
For that first step I don't know what it's called, something like power rebooting or something, i only know how to do it for my computer not a desktop or anything
hope that helps

How to uninstall/remove 11g database on (OEL)Oracle Enterprise Linux 6?

Hi there,
I was facing problem during 11g installation & i'm trying to reinstall 11g database again, but at step8 of 13, it show the error [INS-32021] Insufficient disk space on this volume for the selected Oracle home. i guess because of the previous database files still exist, anyone can give some links or solution ?
Thank you in advanced.
Edited by: 907267 on 11-Jan-2012 00:08

I'm running both 11g as well as 10g on Oracle Enterprise Linux 6 Update 1 without any problem.
Yes I know that it isn't supported but it works.
To your question:
a. is it the ORACLE_HOME it complains about or is it temp? Very often temp fills up during an installation and is not freed after the installation ends.
b. for a cleanup of the existing installation you should remove OraInventory and the files in /etc (like oratab, oraInst.loc).
BTW: I have my own blog (streetkiter.wordpress.com) where I wrote a post how to install 11g and 10g (!) RAC on Oracle Linux 6.
Edited by: carajandb on 16.01.2012 09:02

Oracle Enterprise Linux 6.1 Installation Fails during Disk Partitioning

Hi,
I've tried to install Oracle Enterprise Linux 6.1 by creating a Virtual Machine using Oracle VM Virtual Box in my laptop with Window XP host OS (NTFS filesystem), by following the below steps.
1) Installed Oracle VM Virtual Box
2) Created a new Virtual machine using a virtual box by specifying the two .iso images i.e OracleLinux-R6-U1-Server-i386-dvd.iso and boot.iso as the boot device and by specifying the following Disk files (.vdi) as follows.
2.1) Oracle_Enterprise_Linux_6_1_Root_Disk_1.vdi - For the / (i.e Root) partition - Dynamically expanded storage - 10 GB - ext4
2.2) Oracle_Enterprise_Linux_6_1_Swap_Disk_1.vdi - For the swap partition - Dynamically expanded storage - 10 GB - swap
2.3) Oracle_Enterprise_Linux_6_1_User_Disk_1.vdi - For the /usr partition - Dynamically expanded storage - 20 GB - ext4
2.4) Oracle_Enterprise_Linux_6_1_Home_Disk_1.vdi - For the /home partition - Dynamically expanded storage - 10 GB - ext4
But while installing OEL 6.1 after specifying the partitions, the installer get hung and throws an error as bug while creating the ext4 filesystem on /dev/sda1.
I tried to specify the default 8 GB for all the above four partitions, the installer successfully continues without any issues. But if i specify any partition more than 8 GB, it fails.
Is there anyway I can solve this problem by creating the above specified partitions with the above size ? Why does it fail if i specify any size more than 8 GB ?
Thanks
Harish

8 GB is a common limit for systems were the boot loader or system BIOS imposes an addressable space limit for the boot partition. In such situations, the system boot partition has to fit within the first 8 GB physical boundary of the harddrive.
Your setup seems a bit unusual. Why do you create separate disks for each Linux partition?
Normally the Linux installer creates necessary partitions on the disk, including a /boot partition that is usually only 100 MB in size.
What are you doing with boot.iso? You should be able to start the system from the main installation DVD or .iso image. You might also want to install x86_64 Linux, unless your hardware is really very old and does not support the 64-bit extension. You can run 32-bit software on a n 64-bit OS, but not the other way around and you will limit your software to 32-bit only.

Guide to installing XE and Apex on Oracle Enterprise Linux 5.3 (64 bit)

I have just been through a time consuming and frustrating process of installing Oracle XE 10gR2 on Oracle Enterprise Linux 5.3 x86-64 and I want to share my experience so that others can benefit from it and overcome the same problems more quickly.
Prior to starting I had installed OEL 5.3 and been using it for a few days. The system I am using is a home built box with an AMD Phenom X4 955 Black Edition, 8 Gb RAM, Highpoint RR2680 RAID controller with 4 1TB disks in a RAID5 array and an additional 320Gb HDD storing the OS. I am using KDE3.5 on the desktop.
The main problem I encountered was with SELinux. As I eventually intend to have this system exposed on the Internet I was reluctant to switch it off despite having read extensively about the issues surrounding it and Oracle. I had several failed attempts at the installation process before succumbing to the reality that SELinux and Oracle are not happy bedfellows. I decided to switch SELinux to permissive mode having followed the advice here.
I found a very helpful guide to installing XE on Linux here as part of the installation of an application called Spacewalk. Note that you do not need to complete the whole Spacewalk installation, but just follow the instructions in the linked page.
Before you start you need to ensure that the UID of your oracle user is less than 500. Mine was 500, so I used the following commands to fix this:
usermod -u 250 oracle
find / -uid 500 -exec chown oracle {} \;
These change the oracle UID to 250 (but check that isn't already used first!) and the find command searches for all files that were owned by oracle (but weren't after the usermod cmd) and changes them back to oracle's ownership.
Now follow the Spacewalk instructions until you reach the Server Setup section. Before you do this you need to make a couple of changes to the script /etc/init.d/oracle-xe. I found these changes in various places, such as [link(1)|http://forums.oracle.com/forums/thread.jspa?messageID=1345771&#1345771] and [link(2)|http://dbataj.blogspot.com/2008/08/lblibrarypath-is-not-set-on-startup.html].
Note that in link(1) the oracle-xe-selinux packages installed have the same effect as the chcon command on the shared libraries so it isn't necessary to perform this step.
Open /etc/init.d/oracle-xe in vi (or your favourite editor) and do the following:
line 49: change /bin/su to /sbin/runuser
after line 52 (export PATH...) add the following lines:
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
There are further changes recommended to /etc/init.d/oracle-xe in [this post|http://forums.oracle.com/forums/thread.jspa?messageID=3201491&#3201491] but I haven't done them yet.
Having done the above changes you can now configure Oracle XE by running /etc/init.d/oracle-xe configure (as root!). As I have Apache Tomcat running on port 8080 I changed the default HTTP port to 8500 but kept the listener on its default port of 1521. Once the confuration script is done you will need to change the ports SELinux uses for Oracle as follows:
semanage port -d -t oracle_port_t -p tcp 9000 - deletes port 9000, which is the SELinux default port for Apex
semanage port -a -t oracle_port_t -p tcp 1521 - ensure that listener port is OK (assuming you used default of 1521, change accordingly if you didn't)
semanage port -a -t oracle_port_t -p tcp 8500 - add the new Apex HTTP port to SELinux
After all this running:
semanage port -l | grep oracle
should show you:
oracle_port_t tcp 1521, 8500
I ignored the TNSNAMES.ORA part of the Spacewalk instructions and proceeded with the 'Client setup on 64bit platform' and 'Configuring sqlplus' sections.
For the latter I created a bash script which I have made available in the oracle user and my own user's home directories:
cat > configure_oracle_10g_xe.sh
ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
PATH=$PATH:$ORACLE_HOME/bin
ORACLE_SID=XE
export ORACLE_HOME ORACLE_SID PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
I did this as I intend to install other Oracle databases, e.g. 11gR2, on this box later so I didn't want to put the above in .bashrc.
Having done the above you should be able to log into the database using sqlplus and the XE setup is complete.
The upgrade of Apex 2.2 to Apex 3.2.1 was fairly painless so I won't go into much detail about it - just follow the instructions provided by Oracle.
The only issue I had was right at the end of the process and is documented and answered in [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=958611&tstart=0].
That's it - I hope somebody will find this useful.

On Oracle Metalink site, there are many documents which says that Oracle 32 bit software works on 32 bits OS and 64 bits software works on 64 bits OS. Official support is only in those combination....
So there is no good way to help you in your case-XE is 32 bit application with hard codded compiled libraries which most of them would not work on 64 bit OS.
Sorry
8(
Hope this helps

RPM missing in Oracle Enterprise Linux 5.4

The RPM oracle-firewire-module-2.6.xxxx is missing in Oracle Enterprise Linux.
I have two servers:
1) One runs Redhat EL kernel 2.6.9-11.xxx. I can see my firewire drive from Redhat.
fdisk -l ===> show firewire partitions.
rpm -qa ===> show RPM oracle-firewire-module-2.6.xxxx
2) One runs OEL kernel 2.6.18-164.el5PAE (lateset download from Oracle Store). I cannot see my firewire drive from OEL.
fdisk -l ===> nada
rpm -qa ===> nada
This is very disappointing. Oracle Linux is missing Oracle's own RPMs. I did several installs and made sure I picked everything available in DVD. Further, I searched install media and did not see any firewire RPMs in the DVD. OSS (oss.oracle.com) does not provide RPMs for versions later then Oracle Enterprise Linux 4. I was demoing RAC with Oracle Enterprise Linux 4. Then I upgraded to Oracle Enterprise Linux 5 and now I am screwed. I will have to go to Redhat EL5.

Actually this process has been simplified by quite a bit in 5.4. The original poster has probably already figured this out, but in case someone else looks, the thing to do is comment out the firewire-ohci entry in /etc/modprobe.d/blaclist-firewire and then restart. I was still not able to see anything, so I found the rescan-scsi-bus.sh script and then I could finally see my device. The latest version of the script I found was 1.35. I mention that because I found a few different ones.
My trouble at the moment is that the device /dev/sdx can only be seen on one server at a time. If I shut down one machine, & then rescan, then I can see it on the other. I can use nfs and export it, but that is not quite what I wanted.

Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023

I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115

Enterprise Manager is not able to connect to the database instance. The sta

Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
Listener is shown as unavailable.
lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-NOV-2012 11:52:40
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=freds-server.i-surname.co.uk)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 27-NOV-2012 11:50:02
Uptime 0 days 0 hr. 2 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/11g/network/admin/listener.ora
Listener Log File /opt/oracle/diag/tnslsnr/freds-server/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "GWORCL.i-surname.co.uk" has 2 instance(s).
Instance "GWORCL", status UNKNOWN, has 1 handler(s) for this service...
Instance "GWORCL", status READY, has 1 handler(s) for this service...
Service "GWORCLXDB.i-status.co.uk" has 1 instance(s).
Instance "GWORCL", status READY, has 1 handler(s) for this service...
The command completed successfully
I suspect that this is not just an OEM issue.
see
Listener working but not working for Enterprise manager oracle 11gr2 Linux.
for configuration files
Edited by: Neill_R on Nov 27, 2012 11:51 AM

This was solved by : Osama_mustafa
in the general questions forum
emca -deconfig dbcontrol db -repos drop
emca -config dbcontrol db -repos create

Oracle Application Server 10g R2 installation on Oracle Enterprise Linux 5

Hi there ...
I want to install Oracle Application Server 10g R2 on Oracle Enterprise Linux 5. Can I get an installation instructions (or steps) for that?
Oracle installation guide mentions Suse 9 & 8 and Red hat 3 & 2. There is nothing related to Oracle Enterprise Linux 5 or 4?
Thanks

Yes there is one for 10gR3 too:
Note:465159.1 Oracle Application Server 10g (10.1.3) Requirements for Linux OEL 5 and RHEL 5
Thanks
Shail

Error during Oracle installation in Oracle Enterprise Linux

Hi All,
I was trying to install Oracle 10g in Oracle Enterprise Linux, and I'm getting the following error when I give the command *./runInstall*.
[oracle@localhost database]$ ./runInstaller -responseFile /home/oracle/database/response/enterprise1.rsp -nowelcome
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_12-58-11AM. Please wait ...[oracle@localhost database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
127.0.0.1:0.0
127.0.0.1:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
I have tried to set the DISPLAY variable to my IP address, but it still gives the same issue.
Please find the logs for the same:
[oracle@localhost database]$ /sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:95:3B:4F
inet addr:192.168.64.128 Bcast:192.168.64.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe95:3b4f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:532694 errors:0 dropped:0 overruns:0 frame:0
TX packets:288167 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:792077163 (755.3 MiB) TX bytes:16147337 (15.3 MiB)
Interrupt:193 Base address:0x2024
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3280 errors:0 dropped:0 overruns:0 frame:0
TX packets:3280 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1739143 (1.6 MiB) TX bytes:1739143 (1.6 MiB)
[oracle@localhost database]$ export DISPLAY=192.168.64.128:0.0
[oracle@localhost database]$ echo $DISPLAY
192.168.64.128:0.0
Please suggest on what can be done as this is the last step for the Oracle installation which I'm unable to complete.
Let me know for any more details needed.
Thanks
Ravi
Ph: +919583750774

Hi,
Thanks for the immediate response.
Now I'm getting the following error:
[oracle@scondw01 database]$ ./runInstaller -force -responseFile /u01/database/response/enterprise1.rsp -silent -nowelcome
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_09-10-03PM. Please wait ...[oracle@scondw01 database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Unexpected Signal : 11 occurred at PC=0xB7C297CE
Function=(null)
Library=/tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.chgrp(Native Method)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(OiipgBootstrap.java:1206)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.writeInvLoc(OiipgBootstrap.java:900)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:408)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:400)
at oracle.sysman.oii.oiic.OiicSilentInterfaceManager.doInvSetupOperations(OiicSilentInterfaceManager.java:679)
at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:546)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:929)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Dynamic libraries:
08048000-08056000 r-xp 00000000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
08056000-08059000 rwxp 0000d000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
a4d43000-a4d4a000 r-xp 00000000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
a4d4a000-a4d4b000 rwxp 00006000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
a4d4b000-a4d88000 r-xs 00000000 08:01 659257 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4-nls.jar
a4d88000-a4f2f000 r-xs 00000000 08:01 659256 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4.jar
a4f2f000-a4f67000 r-xs 00000000 08:01 659275 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraPrereq.jar
a4f67000-a5085000 r-xs 00000000 08:01 659274 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/classes12.jar
a5085000-a508d000 r-xs 00000000 08:01 659272 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/swingaccess.jar
a508d000-a50da000 r-xs 00000000 08:01 659255 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-nls.jar
a50da000-a50e0000 r-xs 00000000 08:01 659273 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-swingaccess.jar
a50e0000-a5365000 r-xs 00000000 08:01 659254 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3.jar
a5365000-a538c000 r-xs 00000000 08:01 659259 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4-nls.jar
a538c000-a53f1000 r-xs 00000000 08:01 659258 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4.jar
a53f1000-a54a6000 r-xs 00000000 08:01 659271 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oracle_ice.jar
a54a6000-a54c3000 r-xs 00000000 08:01 659269 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_TW.jar
a54c3000-a54e0000 r-xs 00000000 08:01 659268 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_CN.jar
a54e0000-a54fe000 r-xs 00000000 08:01 659267 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_pt_BR.jar
a54fe000-a551b000 r-xs 00000000 08:01 659266 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ko.jar
a551b000-a5537000 r-xs 00000000 08:01 659265 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ja.jar
a5537000-a5554000 r-xs 00000000 08:01 659264 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_it.jar
a5554000-a5571000 r-xs 00000000 08:01 659263 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_fr.jar
a5571000-a558e000 r-xs 00000000 08:01 659262 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_es.jar
a558e000-a55ad000 r-xs 00000000 08:01 659261 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_de.jar
a55ad000-a55c9000 r-xs 00000000 08:01 659260 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp.jar
a55c9000-a55ea000 r-xs 00000000 08:01 659270 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstImages.jar
a55ea000-a55f0000 r-xs 00000000 08:01 659345 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ojmisc.jar
a55f0000-a56ce000 r-xs 00000000 08:01 659342 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/emCfg.jar
a56ce000-a56e1000 r-xs 00000000 08:01 659344 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-mapping.jar
a56e1000-a57e1000 r-xs 00000000 08:01 659343 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-collation.jar
a57e1000-a5866000 r-xs 00000000 08:01 659341 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xml.jar
a5866000-a5868000 r-xs 00000000 08:01 659349 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstallerNet.jar
a5868000-a5876000 r-xs 00000000 08:01 659350 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/share.jar
a5876000-a593d000 r-xs 00000000 08:01 659347 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/srvm.jar
a593d000-a5a65000 r-xs 00000000 08:01 659346 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xmlparserv2.jar
a5a65000-a5a72000 r-xs 00000000 08:01 659351 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oneclick.jar
a5a72000-a5e0f000 r-xs 00000000 08:01 659348 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstaller.jar
a5e0f000-a5e2b000 r-xs 00000000 08:01 642421 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/sunjce_provider.jar
a5e2b000-a5ee6000 r-xs 00000000 08:01 642420 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/localedata.jar
a5ee6000-a5ef3000 r-xs 00000000 08:01 642419 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/ldapsec.jar
a5ef3000-a5ef6000 r-xs 00000000 08:01 642418 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/dnsns.jar
a60fa000-a62fa000 r-xp 00000000 08:01 330503 /usr/lib/locale/locale-archive
b5bfb000-b618a000 r-xs 00000000 08:01 511764 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/charsets.jar
b618a000-b619b000 r-xs 00000000 08:01 511802 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jce.jar
b619b000-b6274000 r-xs 00000000 08:01 511803 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jsse.jar
b6274000-b628a000 r-xs 00000000 08:01 196225 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/sunrsasign.jar
b62d4000-b79c2000 r-xs 00000000 08:01 511810 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/rt.jar
b79c2000-b79d6000 r-xp 00000000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
b79d6000-b79d9000 rwxp 00013000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
b79d9000-b79f9000 r-xp 00000000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
b79f9000-b79fb000 rwxp 0001f000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
b79fb000-b7a0b000 r-xp 00000000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
b7a0b000-b7a0d000 rwxp 0000f000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
b7a0d000-b7a16000 r-xp 00000000 08:01 344676 /lib/libnss_files-2.3.4.so
b7a16000-b7a17000 r-xp 00008000 08:01 344676 /lib/libnss_files-2.3.4.so
b7a17000-b7a18000 rwxp 00009000 08:01 344676 /lib/libnss_files-2.3.4.so
b7a1f000-b7a23000 rwxs 00000000 08:01 249425 /tmp/hsperfdata_oracle/5761
b7a23000-b7a44000 r-xp 00000000 08:01 344698 /lib/tls/libm-2.3.4.so
b7a44000-b7a45000 r-xp 00020000 08:01 344698 /lib/tls/libm-2.3.4.so
b7a45000-b7a46000 rwxp 00021000 08:01 344698 /lib/tls/libm-2.3.4.so
b7a46000-b7a58000 r-xp 00000000 08:01 344660 /lib/libnsl-2.3.4.so
b7a58000-b7a59000 r-xp 00011000 08:01 344660 /lib/libnsl-2.3.4.so
b7a59000-b7a5a000 rwxp 00012000 08:01 344660 /lib/libnsl-2.3.4.so
b7a5e000-b7a66000 r-xp 00000000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
b7a66000-b7a67000 rwxp 00007000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
b7a67000-b7e6d000 r-xp 00000000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
b7e6d000-b7e88000 rwxp 00405000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
b7e9c000-b7fc1000 r-xp 00000000 08:01 344696 /lib/tls/libc-2.3.4.so
b7fc1000-b7fc3000 r-xp 00124000 08:01 344696 /lib/tls/libc-2.3.4.so
b7fc3000-b7fc5000 rwxp 00126000 08:01 344696 /lib/tls/libc-2.3.4.so
b7fc7000-b7fc9000 r-xp 00000000 08:01 344656 /lib/libdl-2.3.4.so
b7fc9000-b7fca000 r-xp 00001000 08:01 344656 /lib/libdl-2.3.4.so
b7fca000-b7fcb000 rwxp 00002000 08:01 344656 /lib/libdl-2.3.4.so
b7fcc000-b7fda000 r-xp 00000000 08:01 344700 /lib/tls/libpthread-2.3.4.so
b7fda000-b7fdb000 r-xp 0000d000 08:01 344700 /lib/tls/libpthread-2.3.4.so
b7fdb000-b7fdc000 rwxp 0000e000 08:01 344700 /lib/tls/libpthread-2.3.4.so
b7fe9000-b7ffe000 r-xp 00000000 08:01 344641 /lib/ld-2.3.4.so
b7ffe000-b7fff000 r-xp 00015000 08:01 344641 /lib/ld-2.3.4.so
b7fff000-b8000000 rwxp 00016000 08:01 344641 /lib/ld-2.3.4.so
Heap at VM Abort:
Heap
def new generation total 576K, used 387K [0xa6550000, 0xa65f0000, 0xa70d0000)
eden space 512K, 69% used [0xa6550000, 0xa65a8f48, 0xa65d0000)
from space 64K, 50% used [0xa65d0000, 0xa65d8080, 0xa65e0000)
to space 64K, 0% used [0xa65e0000, 0xa65e0000, 0xa65f0000)
tenured generation total 1408K, used 1090K [0xa70d0000, 0xa7230000, 0xafb50000)
the space 1408K, 77% used [0xa70d0000, 0xa71e0938, 0xa71e0a00, 0xa7230000)
compacting perm gen total 4864K, used 4693K [0xafb50000, 0xb0010000, 0xb3b50000)
the space 4864K, 96% used [0xafb50000, 0xaffe5698, 0xaffe5800, 0xb0010000)
Local Time = Thu Apr 5 21:10:05 2012
Elapsed Time = 0
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
# An error report file has been saved as hs_err_pid5761.log.
# Please refer to the file for further information.
Please let me know what can be the solution.
thanks
Ravikanth

In Oracle Enterprise Linux (OEL) not able to redirect pvscan output.

Similar Messages

Maybe you are looking for