In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card

I get this message when I try to TCP/IP settings in any network card. 
"In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card"
What I have tried:
1. Removed card, did not click on "Remove driver". Then re-scanned in device manager. This usually leads to the network card showing up with a yellow exclamation mark, and I can not get it work again (have to use system restore).
2. Removed card, deinstalled driver, re-installed driver. 
3. Rebooted a thousand times. 
4. Used the Lenovo drivers.
5. Used the Intel drivers. 
Doesn't matter what I do, I'm stuck with yellow exclamation marks in the end for the LAN and WLAN card, with not hope to repair them.
Driver version for the Intel 82579LM is 12.9.15.0
Driver version for the centrino advanced-n 6205 is 15.10.4.2
I'd really like some help on how to fix this so I'm able to configure my network manually. 

For clarity, as your machine MTM number lists it with another type of WLAN adapter, and apparently, therein lies your problem.
How To Fix Error Message : In Order To Configure TCP/IP , You Must Install And Enable Network Adapte...
[How To Fix] In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Similar Messages

  • Error "To run a SSIS package outside of SQL Server data tools you must install task name used in package of Integration service or highter.

    Hello Team,
    I am trying to execute a SSIS package from web page. When i try to do that i am getting following error.
    "To run a SSIS package outside of SQL Server data tools you must install <task name used in package> of Integration service or highter."
    In my machine Integration Services are installed and its service is also in running state.
    Please help me on this.
    Thanks,
    Ramesh
    Thanks, Ramesh Arige

    The SSIS package developed using SSIS 2008 Server R2 and Integrations Services 10.0 is exists in my machine. Is this wrong configuration, please help me on this.
    I am using the below code copied from CodeProject
    Thank you so much for responding.
    Ramesh
    Thanks, Ramesh Arige
    Which way are you using from the provided blog? Using 1) C# Code or 2) C# and Stored Procedure?
    Cheers,
    Vaibhav Chaudhari
    MCP, MCTS, MCSA (SQL Server 2012)

  • Please help with this issue "To Run a SSIS Package outside of Server Data Tools You must install Drived Column of Integration sercvies of higher" From C# app

     i have searched all over the google and here on MSDN(I have read all the threads related to my problem ) , i am new to SISS and doing my clg project ,
    I have this package which loads data from  dim tables to a fact table , my Package runs without any problem in BIDS (2012)
    I have installed SQl Server integration services on SQL and service is also running in services.msc,
    the problem comes when i execute my package using my C# application i am using MSDN Method to execute a SSIS package programmatically given here.
    "http://msdn.microsoft.com/en-us/library/ms136090.aspx"
    For loading my FactTable i have used a Derived columns  and some lookups , 
    Now if i don't use derived columns and looks ups and just use source and destination component then my package runs fine from my C# application but if i use derived columns or looks ups etc it gives the following error
    "Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline: To Run a SSIS package outside of SQL Server Data Tools you must Install Derived Column of Integration services of higher"
    I am searching and trying to resolve this issue from previous 2 days but without any luck please help or guide me what is solution to this problem ,,i will be very thankful
    I have also found that integration services that are running on my system have version  10.0
    but the BIDS have version Version 11.0.3402.0
    IS this causing problem ?  if yes then what i have to do  ?

    Hi BlaxButt,
    The package is developed in SSDT installed by SQL Server 2012, so it is a SSIS 2012 package. However, the Integration Services you have installed is SQL Server 2008 R2 version. To run the package outside SSDT, you need SSIS 2012 installed. The reason why
    the package runs fine with only Source and Destination components is that such a simple package can be executed by the DTExec utility installed by SQL Server 2012 Data base Engine or Client Tools (SQL Server Import and Export Wizard). To run a package that
    uses other tasks/components outside SSDT/BIDS, the SSIS runtime is also required except the DTExec utility. To obtain the SSIS 2012 runtime, we have to install SSIS 2012 on the server where the package runs.
    Reference:
    http://stackoverflow.com/questions/19989099/getting-error-running-ssis-package-on-non-ssis-server
    Regards,
    Mike Yin
    TechNet Community Support

  • SSIS: To run a SSIS package outside of SQL Server Data Tools you must install SCR - DP1 Connections of Integration Services or higher

    We have SSIS installed on a machine that is not part of a cluster but it is accessible by the cluster.
    Our job we have running on the cluster is failing with the following error:
    Error: 2014-01-31 09:14:37.52     Code: 0xC000F427     Source: SCR - DP1 Connections  
    Description: To run a SSIS package outside of SQL Server Data Tools you must install SCR - DP1 Connections of Integration Services or higher.  End Error
    Any advice or information on how to resolve this would be great.
    Many Thanks.

    Hi NessaBella,
    Integration Services service is not a cluster-aware service, and does not support failover from one cluster node to another. Therefore, in a clustered environment, Integration Services should be installed and started as a stand-alone service on each node
    in the cluster.
    Based on the error message, it seems that SSIS is not installed on the cluster node on which the job was running. Although SSIS is installed on a machine that is not part of the cluster and can be accessed by each cluster node, the SSIS service installed
    on a remote server cannot be used a cluster node. So, please install the shared feature SQL Server Integration Services on each cluster node. Besides, if certain packages need to run in 32-bit mode in certain jobs and the SQL Server installed is 64-bit version,
    you also need to install BIDS/SSDT on the cluster node to get the 32-bit runtime of SSIS.
    References:
    Integration Services (SSIS) in a Cluster
    Loading and Running a Remote Package Programmatically
    Regards,
    Mike Yin
    TechNet Community Support

  • Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video?

    Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video? (Powerpoint Presentation 2013)

    You asked your question on the wrong forum. Try one for the Flash Player

  • To update applications do not run them, I get notice, you must connect and asks me cdito card. as I do?

    to update applications do not run them, I get notice, you must connect and asks me cdito card. as I do?

    Contact iTune Support
    https://ssl.apple.com/emea/support/itunes/contact.html

  • Error Message You must install macromedia contribute version 2.0

    I am trying to use the functionality from Dreamweaver to
    connect to Contribute and Administer the web sites. I keep getting
    the error "You must install Macromedia Contribute version 2.0 or
    later to administer a site. Would you like to install Contribute
    now?"
    I am running Contribute CS3 and Dreamweaver 8. Is there a
    patch for this issue?

    Yes, that could very well be the problem. All sorts of issues
    rise when the administrator has a lower version of Contribute. When
    a site is administered in CS3 you cannot administer the site in a
    lower version at all. Upgrading yourself would be the best policy I
    think. I always upgrade when the newer version arrives to avoid
    these issues and set the compatibility settings to
    Transitional.

  • Would you recommend installing and creating apps in the apex install schema

    Would you recommend installing and creating apps in the apex install schema for e.g. apex_040100? Or would you rather a separate tablespace be used for the application objects? In addition to this we are integrating it with Oracle EBS? Are there any industry best practices for creating tablespaces and schemas for apex applications?

    A BIG NO!!!, you should be using separate schema's
    Have you seen this http://www.oracle.com/technetwork/developer-tools/apex/learnmore/apex-ebs-extension-white-paper-345780.pdf

  • HT2292 when i press the download iTunes option, besides downloading the iTunes, it directs to another page saying thank you for installing and it dosent download the itunes...what should i do

    when i press the download iTunes option, besides downloading the iTunes, it directs to another page saying thank you for installing and it dosent download the itunes...what should i do

    See the further information area of Troubleshooting issues with iTunes for Windows updates.
    tt2

  • This item is over 20MB. You must connect to a wifi network or use iTunes on your computer to download it.

    Verizon wireless network - unlimited data plan.
    iPhone 4 - iOS 5.0
    "This item Is Over 20MB
    You must connect to a Wi-Fi
    network or use iTunes on your
       computer to download it."
    This message was given when trying to update an app I already had installed on the phone. My question is why? Is this a problem with the programming making you connect to the internet via link or Wi-Fi. Or is this a limitation on the Verizon network? Or perhaps a limitation set in place by Apple to prevent long downloads? So I came here hoping to get some hard cold facts. (since Verizon associates would not or simply could not help me)
    Personally I could care less if it took 6 hours to download an update. I do however have a problem paying a telephone service an insane rate to get "unlimited data" and not being able to receive unlimited data.
    Any help would be greatly appreciated.
    -Luna

    Telstra Australa
    I dont have Wifi in the countryside and theres no DSL, only 3G and 4G. why should I have to buy another 3G service when I already have one? This is one of the problems of globalisation, because AT&amp;T cant handle the volume, the whole world has to suffer.
    I pay per gigabyte, so dont need these restrictions Apple! Its mine to use.
    Daniel.

  • To play this game, you must install Flash Player!

    I'm going crazy.  I get messages to update my 11, then verify and it is installed.  Have followed all Internet Tools instructions to fix it, to no avail.  I can get into some games, then others tell me I must install Flash Player.  I moan at this time, &quot;Not again!&quot;  I'm too old to mess with it anymore, so taking one more shot at having someone get it fixed!

    Download the following files by right clicking and selecting "Save target as"
    Flash Player Uninstaller
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Save ALL files to your Downloads folder - DO NOT RUN anything yet.
    Reboot your system.
    BEFORE opening anything else, go to your Downloads folder and run the UNINSTALLER to remove all instances of Flash Player.
    Next, run the ActiveX Installer.
    Lastly, run the Installer for other browsers.
    Once Flash Player is installed go to: http://www.adobe.com/shockwave/download/alternates/#sp
    Download BOTH files, the one on the right FIRST by right clicking and selecting "Save target as"... the other by clicking and following the steps to dwonload the FULL ActiveX installer.
    After running the "Slim" installer, run the FULL installer from your downloads folder.
    Once everything is installed, see:Enabling Flash Player in Internet Explorer  and: ActiveX Filtering in Internet Explorer  to make 100% sure that Flash Player is enabled and NOT being blocked by ActiveX controls.

  • I must install and setup TDPO on all nodes RAC?

    Hi, everyone
    I have oracle rac 9i four nodes and filesystem archivelogs per hosts. without NFS.
    my question is. Is necesary to backup de archivelogs install and setup TDPO on each node? and by the way. The node_name is tdpo.config it must be the same on all nodes rac.?
    Many Thanks.

    A good place to start is http://www.bombich.com/.

  • To view this content you must install java - ERROR

    I DO have java!!!  I have JRE version 8.25 to be precise. So why, on startup do I always get this silly message which then goes on to tell me that I have version 7 installed.
    I DONT - I have searched and deleted every **** trace of version 7 - and reinstalled version 8.25 everywhere - BUT STILL this stupid pop error up appears every time I restart! I wouldn't mind but its giving wrong info! So how do I fix it?

    I had the same problem and it drove me crazy every time I turned on my Mac.  I found the proper download here:
    http://www.oracle.com/technetwork/java/javase/downloads/index.html
    Laura

  • I go to print and get a You must install a printer message first.  Where do I do that?

    I go to print a picture on my Editor Screen, by clicking on File > Print, and I get a message that "Your have to install a printer first."  Where do I do that.  My printer is a wireless on my LAN.  Don22303

    Jeff,  Yes, from Elements Editor Full.  This is from Elements 10, and I rarely print from Elements so it turns out I was surprised to find the same problem happens with my Elements 8 version, which I still have up.  The version is Windows 7.  I can print fine from all other applications, e.g. Word.  Also print my email, but I had to go back to Internet Explorer 8 from Explorer 9 version because I was getting script errors, but using 8 has been fine for a good while now.  Any advice would be appreciated.   Don

  • Can you mix roaming and extended airport networks as such:

    I have my main aebs connected to the cable modem.  I want to conenct several airport expresses to the aebs via powerlien adapters to form a roaming network.  One airport express I cant connect conveniently to powerline so I want to set it up to extend the wireless network as well as acting as a a wireless to ethernet bridge (to connect a Tivo).  Any pdroblem mixing these two types of networks?

    Several is a lot.. there isn't really enough wireless channels free to make several viable unless you are running 5ghz. You can extend wireless and use the express as ethernet bridge. But it might be worth thinking if you use roaming network naming for the rest of the network.. at least use a different name for the unit you extend.

Maybe you are looking for