In OUT Bound of a Jaxws provider, how can we stop the provider invoking its endpoint and send a response back?

Hi One & All
While we are working on Delegate(provider) for JAXWS client handler in Weblogic10 , we have some technical issues and need some assistance.
Problem Description
In OUTBound of a provider, how can we stop the provider invoking its endpoint and send a response back?
Example:
I have a provider with some handlers configured for both IN and OUT flows. When the Jaxws provider is making a request, the OUTBound Handler gets invoked and in this Handler I would like to stop invoking actual endpoint and send back my own response. That means I should be able to tell the Handler chain to stop further processing of this flow, set a response message into message exchange and invoke the IN flow. How do I do that?
This kind of mediation/interception is possible in standard specifications like JAX-WS, Servlets etc… wondering if Weblogic10 JAXWS provides any sort of this kind.
Also we would like to know who is invoking a provider endpo     int in JAXWS stack in weblogic10? Is it an OUTBound handler at the end of handler chain or some other transport component after the handler chain?
Thanks in Advance
Suresh
Edited by: user12494412 on Jan 22, 2010 7:06 AM

I completely agree with this....I have used Windows and Skype for many years. I recently installed an older version of Skype to run on Windows 8.1 because the new version is SO AWFUL. As much as I prefer the older version (6.14), the daily number of SPAM CONTACT requests is rediculous and most are just variations of the same spammer. Maybe it is time to look for a replacement for both?

Similar Messages

  • How can I Call the MainVI from its SubVI, and this happen recursively?

    Hi All,
    How can I Call the MainVI from its SubVI, and this happen recursively?
    Actually, LAbView 7.1 doesn't support recurssion?
    Plz help me out!

    Dear GerdW,
    Thanks a lot 2 all of u guys,for all the brilliant responses.
    Actually, my basic aim is to call the Main VI, containing a SubVI.....
    Now, I want to call my main VI from this SubVI...recursively!!!!!..but whenever I tried to put the MainVI in this SubVI..an error message pops out saying recursive calling is not possible.
    I also tried using "Call by reference" but tht also didn't worked...an d error is somewat like...VI is invalid..or type matching..or state matching error.
    Here, Im attaching the snapshot of the MainVI... Im calling the SUBvi from it... It is running GOOD n FINE...
    But prob arrives when I call the Main from the SUBvi, which looks like same as MainVI(with little differences).
    I hope, Im clear in my words n not being ambigous.
    Plz, correct me where ever  im wrong.
    Thank You.
    Mishra_RnD
    Attachments:
    ScrShot.JPG ‏272 KB

  • Since the last update my iCloud on my tablet is stuck in update will not let me sign out of it or chande anything  how can I stop the upgrade from running. I've tried everything nothing is working.

    My Apple iPad is stuck on the update in iCloud will not let me sign out of it or do anything in icloud. How can I get it to stop running. I have tried everything that I have looked up online and nothing works.  Every time I put in my apple ID it disables me. Ugg I am frustrated!

    Have just seen the answer to this in a another thread.
    Gilly

  • How can i stop the sign in to icloud and photostream pop up windows

    The pop up windows asking me to sign into iCloud and photostream pop up constantly while im online.  This started to happen after the last update.
    I dont want to turn either of those off because i will lose any shared pictures i have.  Is there a way to stop these from popping up all the time?

    I don't think you have any choice now.  You can always delete the iCloud account after doing so and not use it.
    I'm afraid I'm not sure what else to suggest other than to enter your password.  If you don't know what it is, you'll have to contact Apple support for assistance by calling the Apple account security team for the country you're in: http://support.apple.com/kb/HT5699.

  • When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

    When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

    In Logic:
    Preferences/Audio Set Recording Delay to 0 <zero>
    This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
    On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number.  It's actually a bug in Logic, as it should always display the waveform.

  • Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    If you are printing via a Windows shared printer and it is the Windows user account that you are being prompted for then you can save this in the Keychain, as shown below.

  • Hi, how can i break the value for a row and column once i have converted the image to the array?????​??

    Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
    At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've  tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
    Please help me!
    For your information, I'm using LABView 7.0.

    Hi,
    Thanks for your reply.Sorry for the confusion.
    I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
    Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
    I hope that I have made the problem clear. Sorry if it is still confusing.
    Hope you can help me. Thank you!!!!
    Attachments:
    arrayrowncolumn2.JPG ‏64 KB

  • How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

    How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

    Okay, I haven't found a way to add an extra space using Find/replace, but you might be able to add some text wrap to the check boxes that will push the text away from them.
    Open Find/Replace and click the Object tab.
    Click the Specify attributes to find button to the right of the Find Object Format: field.
    Under Basic Attributes, choose Stroke and then the Black swatch (assuming the black swatch is applied to the strokes of your check boxes). If there are no other stand-alone objects in your form with a Black stroke, this should be all you need. (If there are Black strokes on your table cells, they will be ignored.)
    Click OK
    Click the Specify attributes to change button to the right of the Change Object Format: field.
    Under Basic Attributes, choose Text Wrap & Other > Text Wrap > Type: > Wrap around bounding box (2nd button from left)
    Under Offset, set a Right offset at the distance you'd like to add (I don't know what units you use, but the 3-5 points might work for your purposes...might take some trial-and-error to get it where you want)
    Click OK
    Click Change All

  • How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny?

    How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny in Firefox? I tried some suggestions that dealt with entering "about:config" in a fresh browser, but to no avail. I also downloaded an add-on called "Theme Font & Size Changer", but that didn't work either. So, I am reaching out here as that was a suggestion that another user here offered.

    Ah, yes- that is an ultra high DPI (dots per inch) display. This is a known issue in Flash Player, which Adobe is working on fixing.
    In the mean time, you can get some videos to have normal-sized controls by switching Youtube to the HTML5 video player:
    In Firefox, go to https://www.youtube.com/html5 and click the "Request the HTML5 player" button.

  • How can we stop the Collapse process in process chain.

    hi
    guys
             How can we stop the Collapse process in process chain.if any one know's plz tell me
    your regards
    suresh

    Hi,
    All the above post duly suggest a the methods we usually follow to cancel a collapse request i.e sm37 ---> Cancel without core,but these solution only applies if we are running collapse as a seperate variant in the process chain, in case its running as a part of change run the all above process will lead to the locking of the target.
    In that case if you could "lock the target" even before the collapse ran will result in the "Stopping of the collapse on the target automatically" .
    As far as figuring out the exat job of the collapse, you can directly get the job details in the "display message' , context menu option of the "Collapse variant" in the chain, clicking on the batch monitor and then clicking on the job to get its detail,then going to the specific "Application server " via SM51 and cacelling the job.
    Do check wearther the target is unlocked or not in sm12 if not then choose the object in se03 and select "Unlock".
    Hope it will serve yoour purpose
    Thax & Regards
    Vaibhave Sharma

  • My mac book air e-mail is trying to upgrade but it has frozen. How can I stop the upgrade as I cannot open my e-mail.

    My mac book air e-mail is trying to upgrade but it has frozen. How can I stop the upgrade as I cannot open my e-mail?

    This isn't the fault of firefox. Firefox is a web browser, not your email provider. I'd suggest contacting them (whoever you use, gmail, yahoo, etc.) and asking for help.

  • HT5295 How can I stop the auto play feature automatically playing/streaming the next podcast?

    How can I stop the auto play feature automatically playing/streaming the next podcast?

    Hi there.
    I listened to podcast there were two things I found that helped me out. Both we're in the podcast app itself.
    Firstly change the default sorting order. When looking at the list off episodes a available on your ios device tap on the description part at the top, this will bring up the settings for that podcast (subscribe mark as played etc) scroll to the Bottom and select oldest first. This will mean that if you are listening to the latest download it will stop at the end as there will be no more to play.
    Secondly, and useful if listening to older podcasts in the list, you can use the timer to stop once the current episode has ended. To do this when you are in the podcast playback screen slide the "album artwork" up, revealing the playback options and nifty tape playing animation this is where you adjust playback speed and set a timer. The timer has a number of options to set playback to stop after set amount of time. However one of these options is to stop once the current episode you are listening to ends. This can also be current chapter if the podcast you are listening to supports chapters.
    Hope this helps, if not clear let me know

  • HT5129 How can I stop the "MobilMe has been discontinued" message?

    I don't have any published albums; how can I stop the "MobilMe has been discontinued" message coming up all the time?

    Bill,
    Go to iPhoto>Preferences...>Accounts...and remove the MobileMe account. Then go to System Preferences...>MobileMe, and sign out.

  • How can I stop the sales calls?

    A little over a week ago, Verizon called me to ask me to upgrade my DSL to FiOS.  I told them I'd review it and contact them if I wanted to proceed.
    Saturday morning, they called me to ask me to upgrade my DSL to FiOS.  I told them I wasn't interested.
    Saturday afternoon, they called me to ask me to upgrade my DSL to FiOS.  I told them again I wasn't interested.
    Saturday afternoon, they called me AGAIN (yes, 3 sales calls in one day) to ask me to upgrade my DSL to FiOS.  I told them AGAIN I wasn't interested, and that they'd called me three times that day.
    I emailed a complaint, got a non-response with an invalid link asking for more information.
    This morning, they called me yet again asking me to upgrade my DSL to FiOS.  The sales rep said he could not connect me to customer service, and I kind of went off on him.
    At this point, the only thing I can think of is to see if I can get my phone and DSL services thorugh another company,  Verizon seems to have been bought out by a consortium of Nigerian bankers.

    beatio wrote:
    how can I stop the program from resizing, zooming in and out, of my photos? I want it to create stop action.
    in the Project Properties (command-j), you can tell iM how to handle the initial photo placement method on import. out-of-the-box, iM is set to Ken Burns, but 'fit' should be your setting.
    keep in mind:
    iMovie doesn't allow a clip-length of 1-frame, which is needed for smooth action for stop-motion.
    specialized tools as Boinx' iStopMotion (AppStore, 40$) or the free FrameByFrame do perhaps a (much) better job

  • How can I stop the program from going through all of the text previously put in.  It is making the process very slow.

    How can I stop the program from going through all of the text previously put in.  It is making the process very slow. 

    while True:
    and just indent everything else under it
    Ends when you press ^C.
    if you wish to have a way to break out of the loop, say, when you press enter at the VPC number without entering anything, add the following after your vpc input:
    if not vpc:
    break
    which will break out of the while loop and end your program.
    Last edited by buttons (2007-12-14 22:03:06)

Maybe you are looking for