In Pages, how can I make one page have one column on part of the page and two columns on part of the page?

What I am trying to achieve is a page with one column for all the text I write, but I also want to show two tables (one placed beside the other, not underneath the other) so on the part of the page where I am showing these tables, I would like to have two columns. Is this possible? Underneath the tables, there is more text that should be in one column only.

Use a layout break.

Similar Messages

Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image...

Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image until they click on the thumbnail?

You can do this with "composition" widgets.

HT202060 How can I make Activity Monitor show one graph instead of four for MacBook Air?

How can I make Activity Monitor show one graph instead of four for MacBook Air?

Learn about OS X: Activity Monitor shows one CPU Usage graph on systems with more than four cores
Copied and pasted from top of the page.

How can i make a free facetime video call? There's always appearing that my provider might charge for the call?

How can i make a free facetime video call? There's always appearing that my provider might charge for the call?

If you make a call then tap the Facetime button to connect Facetime, the duration of call up to Facetime connection will be charged under your regular airtime. However, duration during facetime conversation will not consume airtime.
But if you tap the Facetime button on the Contact Page, then the whole duration will not consume airtime.
For Facetime to work, both parties must be connected to wifi.

I purchased CS6 Design & Web Premium. It appears it is the Middle East Hebrew English version??? How can I make it stay in ENGLISH. It keep reverting to Hebrew and type runs right to left? NOT what I asked to purchase?

I purchased CS6 Design & Web Premium. It appears it is the Middle East Hebrew English version??? How can I make it stay in ENGLISH. It keep reverting to Hebrew and type runs right to left? NOT what I asked to purchase? [email protected]

Try setting the text direction with no files open. It should stick for all new files.

How can I make a backup of my iWeb page, How can I make a backup of my iWeb page

How can I make a backup of my iWeb page? Is iWeb also disappearing on June 30?

Here are some Apple help sheets about backing up your files:
http://support.apple.com/kb/HT1813
http://support.apple.com/kb/HT1105
And I found this one written by an independant guy very thorough and helpful:
http://iwebfaq.org/site/iWeb_Backup_retrieve.html
iWeb is not going away, but I would be skeptical about how much longer Apple keeps it around.
If you are looking for a new place to host your website, I use and would recommend Little Oak (www.littleoak.net). They are a Mac hosting company, and are even offering a discount right now for iWeb users (http://www.thewhir.com/web-hosting-news/web-hosting-sales-and-promos-roundup-jun e-29-2012)

How can i make a CHECK in an ALTER table, to compare 2 Variables of TWO different tab

I have 3 tables:
EVALUATION (No_expert, No_article)
EXPERT (No_expert, origine, name)
AUTHOR_ARTICLE (No_Article, Code_author)
AUTHOR (Code_author, Name, Original)
and my question is: How can i make a check to refuse each time an EXPERT ADDED to the EVALUATION table. If this one is an AUTHOR, in other words, the EVALUATION.No_expert must <> than AUTHOR.Code_author.
This is what i did but it doesn't work:
ALTER TABLE EVALUATION ADD CONSTRAINT No_expert
CHECK (EVALUATION.No_expert <> AUTHOR_ARTICLE.Code_author);
thank a lot
luong.

See Disabling (graying-out) Form Fields by Thom Parker. It covers both Acrobat and LiveCycle forms.

HT204380 How can I make my iphone4 call my contact's email on her ipad and not her phone (which is not a smart phone) when both info is in my contact list

When I use my iphone4 to call a contact on her mini ipad it seems to use her phone number from my contact list and this is not a smart phone or in use where she is. How can I make my phone use the e-mail address to call her on her wifi connection.

pdroth wrote:
You're off base... I know what this problem is, and I provided the workaround for her.
Then why was the OP able to make the facetime calls before, with both items in a single contact then (if I am reading his posts correctly)? I know I do not have to separate my contacts like that, and I do facetime with a couple of relatives with wifi only iPads (usually from my own iPad 4 or MBP, but I've done it once or twice from my iPhone 5 - all of which use the exact same contact entries).
Is this a quirk specific to an iPhone 4?

Comments on MacBook Pages– how can I make them visible for all users?

When I use Pages on my MacBook, the comments show up as black text in a yellow box on my computer, but when I export it as a .doc and email it to others, it shows up as white text on yellow for some PC users. This makes it hard for them to read my feedback. Why does it do this? How can I prevent it?

hello, can you try it with the method described at [http://kb.mozillazine.org/Locking_preferences]?

How can I make multiple quizzes within one Captivate project?

Hi guys! Really liking Captivate 5.5, especially the way random question slides can lift questions out of a question pool...very elegant!
Sadly though, I've come up against a bit of a wall. In my project, I want to have 3 separate quizzes that all use the same question pool; a 10, 30 and 50 question-long quiz. Each one needs to have its own results page.
It's easy enough to see what I mean by looking at the screenshot below:
The idea was to have about 105 slides in total, with slides 10 - 20 being the 10 quiz slide, 21 - 51 being the 30 question quiz and 52 - 102 being the 50 question quiz.
There are three invisible buttons placed over those 10, 30, 50 text boxes. In the picture, the '10 question' button would jump to slide 10, the '30 question' button would jump to slide 21, and the '50 question' button would jump to slide 52, jumping the user to the start of their designated tests.
Though I can create the 10 random question "block" easy enough, when it comes to adding the 30 question "block" it just adds the new random questions to the existing random questions. I want three separate quizzes, each with their own results screens please. (I don't want to daisy-chain to external projects, because the results of each test need to be used within the homepage.)
It just adds them on to the existing block!! Argh!!
Little bit ticked off with Adobe...the reason their products are so incredible is because they put no constraints on the user, and you can use their tools to create things even the developers never dreamed of. Like in Photoshop for example, I bet when the dropshadow fx was created, the developers never realised that it would be used to give a metallic 'stamped' look to text by turning it to white and applying it just inside the text.
Captivate, though amazing most of the time, has a nasty habit of stomping on my toes. You can't set grade boundaries and have quizzes give out grades A+ to F- for example. You can only have 'pass' and 'fail', thus making it rather pointless for use in schools, contrary to how the program is advertised. Another example would be when I wanted to create a replay button. I thought that a button that jumped to the slide it was on would be a simple, no-BS replay button, but for some reason you can't make a button jump to its current slide. I downloaded a widget that worked in the end, but I wish Adobe would get off my back and let me do what I want!
Anyway, if you could help me out here it would be grand

I must say I have a little sympathy for the Captivate developers on this occasion. As you say, they've created an application that does so much, that when you eventually run into a hard boundary of some kind, the effect is somewhat jarring. However, every application, no matter how good, has limits. I'm probably one of the worst offenders when it comes to asking the Adobe Captivate Development Team for enhancements (I think I've logged over 70 enhancement requests for Captivate 6 alone).
In your case, you want to have three different quizzes in one project file, each with it's own separate Quiz Results page. Lilybiri's blog explains how to set up your own faux Quiz Results pages using system variables and custom user variables, but you're going to find this to be quite a lot of trouble. Even if YOU want to consider these as three separate quizzes, as far as Captivate is concerned they're just one big quiz with 50 questions. So Captivate will calculate it's internal results based on a 50 question quiz, even if your users select the 10 question version. So achieving a final Pass/Fail result is going to be problematic at best.
As Lilybiri suggested, your better strategy would be to break this up into separate modules so that you can get your three separate quiz results (all done in standard Captivate) as well as correct results based on the actual number of questions done by the user.
As far as grades A-F is concerned, there's nothing to stop you from using Advanced Actions and User Variables to calculate the user's score as a grade. You need a user variable that stores the user's grade (e.g. var_Grade). And you need a fairly complex Conditional Advanced Action (e.g. caa_CalculateGrade) with several clauses each of which goes something like:
If
cpQuizInfoPointsscored is lesser or equal to [highest score for a particular grade]
AND
greater or equal to [lowest score for a particular grade]
Actions
Assign var_Grade with [the appropriate grade for that range of scores]
Your conditional action will need one of these clauses for each separate grade. Once your variable has been assigned a grade based on the user's score, you can display it in a text caption somewhere on the quiz results page or on a slide thereafter with suitable commendations/ commiserations.

When I click and open my Firefox browser ,it always opens to Firefox welcome page ,NOT my google search page , which is my home page , how can I fix this , I have to always have to close FF before I can search !!??

Can you help me figure out how to stop Firefox from opening to welcome page / updated window, I have to close that before I can use my google search page ,which is my homepage !!

You can start by checking the Home page setting to see if that still links to the Google Home page (http://www.google.com/firefox)
* Tools > Options > General > Startup: Home page
You can also check the startup setting just above the home page setting.
If the home page setting isn't correct and changing it doesn't last if you close and reopen Firefox then you need to check if the file [http://kb.mozillazine.org/prefs.js_file prefs.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] isn't corrupted.
* Help > Troubleshooting Information > Profile Directory > Open Containing folder
* http://kb.mozillazine.org/Preferences_not_saved

How can I make multiple computers share one iBooks library?

I have several computers with which I sync my iPad. I loaded a bunch of PDFs into iBooks onto my iPad from one of them *but* the PDFs do not show up in the iBooks library on the other computers. If I click on "Sync Books" on one of hte others it asks me if I want to remove all the existing books on the iPad which I most certainly do not. How can I keep the iBooks library in sync on these multiple computers?

Books and pdfs aren't synced. Bookmarks, highlights and collections can be synced across devices. pdfs downloaded onto an iPad can be transferred to a computer when connected using the USB cable.
iTunes Store: Transfer purchases from your iOS device or iPod to a computer

How can I make a change on one computer effect other compujters automatically

If I change a bookmark on one computer, I want that bookmark reflected on all the other computers. It seems as if I have to do the sync on system A to get the change to the server; then I must go on System B, change the sync type to copy from the server and do a sync. This is way too cumbersome. If synch means to have the same data everywhere, why isn't the default to make this happen as one logs into each system? right now if I make a change on one system and do a synch, it will get overwritten when I go to another sysem and synch.

We use test sites on our remote server. We purchase a cheap $2.99 .info domain and give it a unique domain name. We then make it an addon domain on our remote server.
When we're building sites we then make a unique subdomain to the addon domain. We upload our files to each unique site's subdomain so we can see and test them live,.then we can contact the client
and tell them to take a look at their site live, which at the time is a subdomain, etc.and uploaded.
Once we have the site completed and uploaded to the designated subdomain we then contact the client and ask them to test their site and see if it's ready or do we need to make more changes.
We use a hosting package for this that cost us less than $30.00 a year with unlimited domains and subdomains. We've got about 30 subdomains on it now and they're not even making the usage wiggle because of taking very few hits.
Once the site is completed and approved we then delete that particular site's subdomain and upload to the clients remote server.
We don't test our sites locally, we test all our sites live as we build them using a subdomain to the .info tld domain on our remote server. You can also buy hosting packages for around $12.00 a year to test your sites on.

How can I make button changing from one pic to another pic?

Hi,
I want to make an image as button which should show on mouse over anoher image? How it is possible?
Please help.
Regards.

either right click the keyframe and go to convert to blank keyframe, or
delete the keyframe and add a blank keyframe instead, or just erase
everything in the keyframe. Whenever you make a new keyframe, it will bring
over whatever is present in the previous keyframe unless you have flash
create a blank keyframe.

How do I make a thumbnail that has a gallery inside? And how can I make this gallery have embeded videos from vimeo + Images?

Hello,
I'm pretty new to Muse so I don't know a lot about it, but I researched a lot and didn't find an answer to this question.
I'm trying to make a portfolio website. The website will be a 12 thumbnails. But each thumbnail is one project, not an image.
When you click one of the thumbnails, I want it to be a lightbox that will show embeded videos from vimeo mixed with images.
Ex: A coca-cola projet.
Main page has a thumbnail of a coca cola image. When you click on it, it opens a lightbox with a coca-cola film, when i click to the right arrow, it shows a cocacola poster, then another poster, then another video. (but they are all part of this gallery, that is inside the thumbnail.
Can you guys help me?
Thanks!!!

I don't understand why my thumbnails don't work.
I dragged a composition lightbox inside another one. But I still have the first lightbox there and can't delete.
When I try my wabsite i see this:
But then I click the thumbnail and I see this:
And when I click one of those 3 I see this:
Like it is making a double lightbox.
but it doesn't show the images, it's like the first lightbox is on top of the second one.
How I deal with this? =/

In Pages, how can I make one page have one column on part of the page and two columns on part of the page?

Similar Messages

Maybe you are looking for