In Persistance layer Current fill leve is in red color

Hi Gurus,
Can any body tell me that, sxmb_moni--->persistance layer After opening that i am getting the above screen
my doubt is that in that screen current fill level is in red color what does it mean is this is Error case or may be another reason.
Can any body tell me that why it is in recolor.So we need to worry? regarding this
Can any body tell me ,as we can do any settings or basis can do these kindly help me on this.
Thanks

Hi Krupa,
Thanks for your reply i have gone thru that link, my question is in that screen shot
No of Tables Entris 699,665
Expected no of table entires is 760,00
so in that case there is some space is there in the table so why it is showing RED COLOR
For Current fill level,is there any setting i can do or Can i involve basis people for this.
Regard

Similar Messages

Integration Engine Persistance Layer Analysis

Folks,
These are the entries in Persistance Layer Analysis
<i><b>Current Table Load
      Number of Table Entries                                                 338,417
      Maximum Number of Table Entries                                         890,000
      Current Fill Level in %                       </b></i>                               38
Can anybody tell me how to increase the Maximum Number of Table entries ?
Records,
Manish

In case anyone else has this same problem, I asked SAP:
"This is only a theoretical value. This value was calculated by DDic. Depending on table size category, DB Hardware,etc. You can see this value by the table size category. ( Transaction SE11 (table e.g. SXMSPMAST) -> Technical Settings -> Sizecategory )
The description is:
The size category determines the probable space requirement for a table in the database.
You can select the categories 0 to 4 for your table. Each category is assigned a specific fixed storage area value in the database. When you create a table, initial space is saved for it in the database. If more space is required later as a result of data that has been entered, the storage space is increased in accordance with the category selected.
Press F4 on the field Size category to see the number of data records that can be maintained for the individual categories of your table without complications ensuing. These complications could be for example a reorganization becoming necessary because the maximum space to be
reserved for the table was exceeded due to the maintained size category."

Persistance Layer Anaysis shows high percentage

Hello Experts,
The PI System is showing high percentage (500 plus) of usage in persistance layer analysis. Recently I encountered queue blockages with TIME_OUT exception as the records were not able to insert in the table SXMSCLUP.
Can anyone tell me should I be worried about so much usage in the persistance layer? However, all the archiving and deletion jobs are running regularly.
Thanks in advance,
Anand Patil

Hello Anand,
What is current setting for Integration Engine's parameter DROP_MAX_TABLE_LOAD?
Please also advise approx. amount of processed messages per day and retention period (you can check SAP Note 872388 for general calculation logic of DROP_MAX_TABLE_LOAD based on these two input parameters).
What is approx. volume of processed messages?
Did you follow the logic described in the mentioned Note (872388) for scheduling archiving/deletion jobs or some other considerations?
In general, persistence layer should be cleaned on regular basis and since you observe exceptions when querying it, the attention for double-checking of current parameters for archiving/deletion jobs vs. persistence layer usage should surely be paid.
My regards,
Vadim

Persistent Layer Error Message: ORA-01729 database link name expected

Hi,
I've done a series of loads from DB2 into Oracle, initially importing the database objects from DB2 and Oracle, then creating the mappings, deploying and executing. It all worked and I had no problems. For some reason now whenever I tried to import a new Database Object (table) from the DB2 I enter the password, test it and it successfully connects but then I get the error message on a popup box:
SQL Exception
Persistent Layer Error: SQL Exception
Class Name: CacheMediator
Method Name: getSQLResult
Persistent Layer Error Message: ORA-01729 database link name expected
If I create a new location for the same database it works and I can import new objects. The only difference I can think from the initial imports is that I’ve moved the repository from one server to another. Might be the case where some information got corrupted in the metadata.
Has anyone seen this kind of problem before? Can you please help me out with this issue?
Thanks in advance for your help.
Regards,
Leo

I found it.When I look at the db links there is something missing.When I correct it everything works fine.

Unloading the rarely used column tables on to the persistent layer ?

Hello Folks,
Can someone please let me know how to unload the column tables of a particular schema that are not being used every now and then, on to the persistent layer?
eg: UNLOAD "SCHEMA_NAME"."TABLE_NAME" will unload only a particular table on to the disk, but how do i select the tables that were inactive say since the last 1 week of a particular schema.
Thanks in advance.
Regards,
Krishna

Hi Atul,
Thank you for providing me with the information,As per the link you sent me i am assuming that the process of unloading the rarely used inactive tables on to the DISK is totally managed by the HANA's inbuilt algorithm. But HANA only unloads the tables on to the persistent layer when the memory reaches to or above 90% of the memory, There should be a way out .
BTW its krishna and not Krishana
Regards,
Krishna

I am trying to change the color of a background layer and it will not accept the color I want

I am trying to change the color of a background layer and it will not accept the color I want

If you want to get help you may have to provide a lot more details about what you are doing (which tools or commands do you use, what exactly happens when it fails, …)?

When i waned to buy and finished filling all the (*), i clicked on conifirm membership they worte this in a red color: There was a problem processing your order, please contact our Customer Service team for assistance.Middle East

when i waned to buy and finished filling all the (*), i clicked on conifirm membership they worte this in a red color:
There was a problem processing your order, please contact our Customer Service team for assistance.Middle East & North AfricaBahrain: 80081097Egypt: 08000000447Jordan/Kuwait/Lebanon/Qatar/Yemen: English +44 207 365 0735Jordan/Kuwait/Lebanon/Qatar/Yemen: Arabic/French +44 203 564 4145Oman: 80077173Saudi Arabia: 8008446638Tunisia, Morocco and Algeria: +33 157324642United Arab Emirates: 80004443085Commonthwealth of Independent States (CIS): +44 207 365 0735

Verify that everything about your Adobe ID and your country and your credit card match exactly
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-wrong email https://forums.adobe.com/thread/1446019

2 month old date from current date in red color only

Hi all,
How can I Highlight 2 month old date from current date in red color only at report level with using Alertr.
Example:-
Date
3/27/2014
4/3/2014
3/5/2014
4/1/2014
3/31/2014
5/24/2013
2/10/2014
4/11/2014
12/11/2013
9/25/2013
1/30/2014
2/18/2014
2/24/2014
1/6/2014
3/3/2014
Thanks
Sam

Hello Sam,
are you using Universe for your report..if Yes..pls try below option.
Create two objects in the universe
Object1 syntax: current date() (Note:this object you can create at webi level)
Object 2 syntax:addmonths(sysdate;-2)
Now create a alert in webi report by using below conditions
Day is less than Object1
and
Day is greater than Object2
Please try this and let me know if any issues.
Regards,
Naveen D

Cannot fill a rectangular shape with Color

HI,
I cannot fill a rectangular shape with color. I know it was working at some point. I checked the ID help, and did a search here with no results.
I have the tool bar set correctly I think (see below). The object isn't behind other objects either, - that I can see. I do see it when I use the scroll bar so it's there somewhere. (see Pink box below).
Any ideas profound or otherwise?
Thenk Yew.

You haven't got 100% transparency applied to it? Then it might appear while scrolling because of a slightly delayed display. That's all I can think of at the moment...
The other thing to try if you suspect an individual document is playing up is to export it to inx or idml and open that. Then another thing is to try replacing your preferences.

HELP ! why doesn't color picker select specific color ? i make secondary layer and use the tool but no colors are selected and the gray out menu shows nothing !

HELP ! why doesn't color picker select specific color ? i make secondary layer and use the tool but no colors are selected and the gray out menu shows nothing !
what am i missing ??!!

Please add you system info and SpeedGrade version and build number if you actually want help.

Fill shape with 2 solid colors

Hi,
I was wondering if there is an easy way to fill a roundRectangle2D with 2 solid colors. For example that 1/3 is blue and the other 2/3 is green? I've looked in the java graphics2D api but can't find anything. GradientPaint isn't what I'm looking for, so is there any other easy option.
Or is it the hard way and you need to draw several shapes on top of each other?
class EventPanel extends JComponent{
    @Override
    protected void paintComponent(Graphics g){
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D) g.create();
        Double widthRect = (double) this.getWidth();
        Double heightRect = (double) this.getHeight();
        Double arc = widthRect / 20.0;
        Float strokeSize = 1.0f;
        Double offset = strokeSize / 2.0;
        Double adj = offset * 2;
        RoundRectangle2D.Double roundRect = new RoundRectangle2D.Double(offset, offset, widthRect - adj, heightRect - adj, arc, arc);
        RenderingHints rh = new RenderingHints(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
        g2.setRenderingHints(rh);
        g2.setPaint(new Color(30, 144, 255, 80));
        g2.fill(roundRect);
        g2.setPaint(Color.BLACK);
        g2.setStroke(new BasicStroke(strokeSize));
        g2.draw(roundRect);
        g2.dispose();
    }Similar to this: Example Don't mind the quality. Not good at art.
Edited by: Kligham on 26-aug-2010 22:55
Edited by: Kligham on 26-aug-2010 22:58
Edited by: Kligham on 26-aug-2010 23:01

Or is it the hard way and you need to draw several shapes on top of each other?What's so hard about that? But if you're looking for an alternative approach, you can do it with Graphicd$setClip(...)
GradientPaint isn't what I'm looking forWhat about LinearGradientPaint?import java.awt.*;
import javax.swing.*;
public class StepGradientPaint {
float[] fractions = {0F, 0.5F, 0.50001F, 1F};
Color[] colors = {Color.RED, Color.RED, Color.GREEN, Color.GREEN};
Paint paint = new LinearGradientPaint(0F, 0F, 200F, 0F, fractions, colors);
public static void main(String[] args) {
    SwingUtilities.invokeLater(new Runnable() {
      @Override
      public void run() {
        new StepGradientPaint().makeUI();
public void makeUI() {
    JPanel panel = new JPanel() {
      @Override
      protected void paintComponent(Graphics g) {
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D) g.create();
        g2.setPaint(paint);
        g2.fillRect(0, 0, getWidth(), getHeight());
        g2.dispose();
    panel.setPreferredSize(new Dimension(200, 200));
    JFrame frame = new JFrame();
    frame.add(panel);
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    frame.pack();
    frame.setLocationRelativeTo(null);
    frame.setVisible(true);
}db

Adjustment layer: solid fill

Hi I'm looking for a way to create an adjustment layer kind :"solid fill" with applescipt.
It should have a fill with an Lab color (eg; L= 20, a=10, b=13)
Code:
   tell application "Adobe Photoshop CS3"
       tell current document
          set newLayer to make art layer with properties {name:"MyInkName", kind:solid fill layer, color:{class:Lab color, value_L:20, value_a:10, value_b:13}}
         end tell
end tell
error:
You can only change the layer's kind to text or normal.
Thanks,
Koen

I don't know java script.
Also I get the lab values from an excel sheet with applescript.
I found this java code but it needs the be changed:
1) I want lab values and the this code generates an RGB color
2) I need to input the lab values from applescript
How can I do this?
Tnx
tell application "Adobe Photoshop CS3"
activate
do javascript "var id115 = charIDToTypeID( \"Mk \" );
    var desc21 = new ActionDescriptor();
    var id116 = charIDToTypeID( \"null\" );
        var ref8 = new ActionReference();
        var id117 = stringIDToTypeID( \"contentLayer\" );
        ref8.putClass( id117 );
    desc21.putReference( id116, ref8 );
    var id118 = charIDToTypeID( \"Usng\" );
        var desc22 = new ActionDescriptor();
        var id119 = charIDToTypeID( \"Type\" );
            var desc23 = new ActionDescriptor();
            var id120 = charIDToTypeID( \"Clr \" );
                var desc24 = new ActionDescriptor();
                var id121 = charIDToTypeID( \"Rd \" );
                desc24.putDouble( id121, 9.999847 );
                var id122 = charIDToTypeID( \"Grn \" );
                desc24.putDouble( id122, 39.999390 );
                var id123 = charIDToTypeID( \"Bl \" );
                desc24.putDouble( id123, 49.999237 );
            var id124 = charIDToTypeID( \"RGBC\" );
            desc23.putObject( id120, id124, desc24 );
        var id125 = stringIDToTypeID( \"solidColorLayer\" );
        desc22.putObject( id119, id125, desc23 );
    var id126 = stringIDToTypeID( \"contentLayer\" );
    desc21.putObject( id118, id126, desc22 );
executeAction( id115, desc21, DialogModes.NO );"
end tell

Photoshop Applescript, select a layer and fill?

How do I select a layer than I have named "BACKGROUND"
Then fill with White,
then select layer "Main Image"
within Photoshop?
Many Thanks
Matt

Hi,
Here is an example :
tell application "Adobe Photoshop CS5"
      tell current document
            deselect -- deselect all in the document
            set current layer to layer "BACKGROUND" -- select
            tell current layer to if not visible then set visible to true -- must be visible to fill
            --- fill the current layer with White , adjust (blend mode, opacity and preserving transparency)
            fill selection with contents {class:RGB color, red:255, green:255, blue:255} blend mode normal opacity 100 without preserving transparency
            set current layer to layer "Main Image" -- select
      end tell
end tell

Why is my Layer Mask filling with Grey

I'm working in a multi layered CS5.1 Photoshop project (I did not create it). One of the adjustment layers in the project needs a layer masks, and when I create one it is not working properly. I make my selection that I want to mask off and create the layer mask it creates it with White and a 50% gray insted of black. Likewise when I alt click to create a layer mask it fills it in with black and 50% gray. The layer did have a 87% opacity to it so I thought this was causing the gray to happen, but when I turned the Opacity to 100% the mask was still being created with gray.
I use the fill tool to fill the gray with Black or White (Fill settings are opacity 100 and fill 100) it fills the mask more like my fill opacity is set to 50%. Likewise it does this for the pant brush as well. I have messed with every layer setting I can find including the layer mask panel and the adjustment layer panel, and nothing seem to work. Please help.
P.S. I'm doing this for work and so I cant take any screen shots to show what is going on.

Gsmith98 wrote:
JJMack: I control click the layer mask to select everything in it. The original layer does have some fethering to the file but i cant see why it would fill everythign the same shade of gray, and then not let me paint over it with black. This normally works for me and this issue is quite new.
Ctl+Clicking on the layer's layer mask icon in the layers palette should work and load the layer mask as a selection. Have you tried resetting your Photoshop preferences. Also ALT+Clicking on the layer's layer mask icon in the layers palette should display the grayscale of the selection in the image window.

How automatic dirty checking works for persistance layer?

Hi,
I recently started learning about Java Persistance API and also about Hibernate and I came across this example
private void addPersonToEvent(Long personId, Long eventId) {
    Session session = HibernateUtil.getSessionFactory().getCurrentSession();
    session.beginTransaction();
    Person aPerson = (Person) session.load(Person.class, personId);
    Event anEvent = (Event) session.load(Event.class, eventId);
    aPerson.getEvents().add(anEvent);
    session.getTransaction().commit();
}and in the explanation they have given like
After loading a Person and an Event, simply modify the collection using the normal collection methods. As you can see, there is no explicit call to update() or save(), Hibernate automatically detects that the collection has been modified and needs to be updated. This is called automatic dirty checking, and you can also try it by modifying the name or the date property of any of your objects.
How does it work? I know that something called dynamic proxy that exist in java, is it by that?
Let us say I want something to do like an interceptor, whenever I call a particular method on an object, that call will first be address by me and then it will be delegated to the actual object.
Say
public void handleEvent(SyncCompletedEvent event)
        // We have to handle this one, this is the only one that will trigger the start up sync
        // however, this request doesn't need response!
        if (event.isSenderDeviceCommunicator())
            // set the request to null, so that no intermediate response will be sent out.
            handleRequest((UpmSyncRequest) null);
        if(event.getSubType().equals(SyncCompletedEvent.SUBTYPE.LEGACY_SERVER_STARTUP_COMPLETED))
            ((UpmService) getService()).scheduleAuditBackup(false);
    }

What kind of problems do you have with the Firefox 28 release?
Did you check your security software (firewall, anti-virus) to make sure that the new version in allowed?
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
You can create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

In Persistance layer Current fill leve is in red color

Similar Messages

Maybe you are looking for