In PFCG - Org. Management button appears RED
Hi experts,
We are facing a problem to see the Org. Management button under Users tab of transaction PFCG. Even though we have perform the User Master Comparison with HR comparison option and perform user reconciliation through Org. management tab. But still this button appears Red. So our people are in animpression that the user comparison has not been done.
Please give your suggestion to find the issue and some workaround about this.
Your inputs are most appreciated.
Thanks in advance.
Regards,
Raju
>
Bernhard Hochreiter wrote:
> > {Dipanjan Sanpui wrote:}
> >This need to be activated by maintaining a switch in table SSM_CUST. Please check the description of the switch INDIR_OGR_ACTIVE there.
>
> Hi Dipanjan,
>
> I think you mean HR_ORG_ACTIVE, which has to be set in PRGN_CUST.
>
> b.rgds, Bernhard
Oops!!! Exactly... thought this one.. but given some different input. Though not in different world.
Hi raju,
Please ignore my earlier post and see the details mentioned by Bernhard here.
Regards
DIpanjan
Similar Messages
-
I've encountered a problem while synching my entire library. After synching I've noticed that only half of my library is playable on my iPhone. And a red circle with a Stop button appears next to the songs that didn't sync. Why is this happening?
media in the itunes lib but not connected when the sync take part will fail in this manner
media in a not supported format on ios will fail to sync
http://www.apple.com/iphone-5s/specs/
Audio formats supported: AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV
User-configurable maximum volume limit -
My iPad Wi-Fi cellular 16 GB 4G switched off suddenly, even when the battery was 40% available. It is not switching on again, i have tried restarting by using sleep/wake button, but red slider does not appear. I kept it off like it was overnight, in the morning agin recharged it, but still it is not switching on. it is not responding, except when i connect the charger, it gives a blink noise that recharge has started. I removed the SIM and tried restart it but no response, What should i do to restart it please?
Seems to be working again, I haven't done anything though. And the "wifi" led on my laptop is off, which should mean that the interface is down.
This is driving me crazy I don't understand how the all thing works, if anyone has any tips that would be very nice.
Thanks! -
Pa custom infptype and org management infotype creation
hi experts,
pa custom infptype and org management infotype creation
steps are same or not.
If any difference b/w both plz give me step by step procedure.
Regards,
SandeepPA infotype will create in PM01 everything we need fill from PM01.
OM infotype
:- 1. we need to create HRI9XXX structure.
2. PPCJ t-code u can create from this t-code.
PA INFOTYPE CREATION
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the `Employee Infotype' radio button.
4) Select the `PS Structure Infotype'.
5) Click on Create. A separate table maintenance window appears.
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on `All' push button. It takes a few moments.
10) Click on `Technical Characteristics' . Infotype list screen appears
11) Click on `Change'(pencil) button
12) Select your Infotype and click on `Detail' (magnifying glass) button
13) Give `T591A' as subtype table
14) Give `T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on `Infotype Characteristics' . Infotype list screen appears
18) Click on `Change' (pencil) button
19) Click on `New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement.
25) In the PM01 initial screen.Select `Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select `Layout Editor' and click `Change'.
27) Screen default layout appears.here you can design/modify the screen.. change the attributes of the fields. etc.
28) Save and activate. (Don't forget to `Activate at every level)
Edited by: sapabap229 on Aug 30, 2010 11:19 AM -
New Azure Database does not have a manage button
I just created new azure databases on a new Azure subscription. Everything appears to be in place except the Manage button is missing in the portal (both the old one and the new one). The manage button is displayed on the old subscription. I
made sure my IP address is tied to the new server.
Is there something else that needs done?Hi,
Did you create a V12 Database?
The manage button that links you to the Azure SQL Database Management Portal
(http://yourservername.database.windows.net) is not supported by a V12 Azure SQL Databases.
For more info, take a look at the Limitations section of this article:
http://azure.microsoft.com/en-us/documentation/articles/sql-database-preview-plan-prepare-upgrade/
Microsoft recommends Visual Studio 2013 Community Edition ( A Full Featured IDE - FREE! ).
Download link here: https://www.visualstudio.com/products/visual-studio-community-vs
In visual studio 2013, you'll have about the same capabilities as the old Azure SQL Database Management Portal. -
CIC Profile and Org Management
We are currently upgrading from R/3 4.7 to ECC 6.
Since upgrading our test client, the cic profile does not appear to be called when going to transaction CIC0 - Customer Interaction Center.
We are using Org Management and have cic profiles (infotype 1260) assigned to each position. We also have a person tied to each position and the employee's system username is tied to that person (personnel no.) in inftotype 0105 - subtype 0001.
It seems like we are missing something between the personnel number and the position - as if it's not picking up the username when an employee goes to t-code CIC0. It is now using the defautl profile (000001) instead of the one we have specified on the position.
Any feedback/advice would be greatly appreciated.
KHi Amol,
Firstly post ur queries in a separate thread.
Now to answer ur query i.e. how do u come the context (created/updated/ transaction type etc). Whenver a BADI is called like for eg. CRM_ORDERADM_H_BADI, it will have an import parameter iv_guid, which holds the header guid of the transaction. Taking this header guid, call FM CRM_ORDER_READ, pass this guid. You can fetch all the information of the transaction which is opened or being edited or created, what is the transaction type.
The complete information of the transaction can be fetched on just passing the header guid to the mentioned function module.
Wish the information is useful.
Regards,
Shalini Chauhan -
Pavillion dv6-1030US mute button stays red
Hey, help please. Have windows vista (do not know if 64) or just vista. Mute button stays red all the time. Volume bar works most of the time although some times not. I have flashed the bios. Do not know where to go from here. 65 year old frt, not too savi on pc so please talk to me as such. Thank you in advance for whatever help you can give me.
This question was solved.
View Solution.Hi,
You're welcome
Try using Recovery Manager to reinstall the IDT Audio Driver - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Why is it that whenever I download a song from itunes that a small grey button appears next to the song (apparently this is the download progress) but whenever I hit it to resume, the song disappears. I am getting annoyed with having to copy the songs manually onto my phone. Thanks for anyones help. Cheers
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
In mail Snow Leopard, the trash button was red, the unwanted mail orange,there was a type button. Now the type button is gone, the rest is grey, why?
I mean in OS X Lion of course. Same with Finder window: There used to be a 'Today' option, where has that gone? It was so easy to have an overview of the work you were busy with. Does anybody has a tip?
-
ITunes won't play song, even though pause button appears
Recently my iTunes has stopped playing songs. If I click the play button, the pause button appears but the progress bar does not move and no sound is made. The volume on my computer is fine as I can still watch videos on youtube and such. I've recently updated to the lastest iTunes and am not sure whether the songs played find after that or not. I read that it could be a probably with quicktime but I've deleted that and downloaded it again but that did not help.
Please help me!I noticed today I am having the same problem. Song would not play in Ver. 9.1.0 and 9.1.1. Same song plays fine in another media player. Also seeing the same that al0022 is seeing, my play button changes to a pause button, and my progress bar does not move. I am able to navigate around iTunes until I try to play a song then I have to kill the task.
I had a Windows update performed yesterday, and believe the windows update is the cause of the problem.
Anyone else unable to play after Windows updates were performed?
Collin -
How to change gtk theme dialog box button appearance when using tab?
Hi,
I'm using candido as my gtk theme and have noticed that when a dialog box pops up (Yes / No), it is extremely difficult to tell which option is highlighted. How do I change this appearance? I searched through the gtkrc and even used gimp to manipulate the images used via trial and error to see if I found one that worked. Can someone familiar with gtk themes tell me which gtkrc or image to alter to affect this appearance?
I use tab to select my option a ton and hate not being able to tell what I'm looking at.
For reference,
- here is the current look (can you tell which one is highlighted? It's "Cancel" -- just slightly bigger or a fine line around it) LINK
- here is the gtkrc if that helps? LINK
For one more point of clarification, I'm not talking about the button appearance on mouseover. I have identified that the button-prelight.png file changes that. I specifically am talking purely about a dialog popping up and then using the tab key alone to highlight through the options. I really like this theme, but this one thing drives me crazy. This appearance changes when I select different themes with lxappearance, so I've narrowed it down to being a gtk-theme issue, not my openbox theme or icon set.
Many thanks!
Last edited by jwhendy (2011-02-02 18:11:10)HI,
Debug the program after you press the CANCEL button , you will get where the conrol is flowing , And instead of using
Leave to screen '910' use Leave to screen 0.
Regards,
Madhukar Shetty -
I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report: 8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE 1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker. -
Org managament -Cost Center- Position
Hi Experts,
There is a clarification required, I am creating Jobs,Positions from 01.01.1900 upto 31.12.9999 and the FI consultant has created his Cost centers mentioning the date as 01.04.2009. As se says that I need to mantain the cost center creation dates only 1 year prior to GO-LIVE date.
Now the problem is when I am creating one of the Positions in the Account Assignment tab details and its Cost distribution tab in Org Managment with PPOCE transaction, by assigning the positions relevent Cost Center where he falls to....the system throws and error stating that Cost Center not maintained on 01.01.1900 as it is the matter of that cost centers have been created only from 01.04.2009.
So, now can any of you let me know how myself and FI consultant need to resolve this issue?
Best Regards,
KishoreJ.Hi,
So, I would go ahead and create Jobs & Positions according to Cost Center dates. Can you please clarify me with one thing is
Now If I create the Jobs & Position of the date from which Cost Centers have been created in my case 01.04.2009, will I be able to hire an employee with the created Jobs & Positions with previous date like for example an employee is working with Organization from 01.01.2003 till date as when I do hiringaction, system asks me for joining date, so mentioning his joinning date as 01.01.2003 and maintain all the Org data with Account Assignment, Cost Distribution as per the relevent dates.
Thank You,
KishoreJ. -
Phantom Play Button Appearing in middle of first slide
I have a Play button appearing in the middle of my first slide and cannot figure out where it is coming from. I
do not have any selections made for a control panel . Here is a capture of what I am getting. Anyone else have this problem? I really need help on this one. Never saw it before.Hi there
You may believe it to be a "Phantom", but the odds are you actually told it to be there.
Try clicking Edit > Preferences > Project > Start and End.
My money is betting that you have cleared the "Auto Play" check box at the top of that screen.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Making Buttons appear depending on the results of a SQL Query
I need some help here I am still working on a time clock program
I need help with the clock in and out buttons i need to know how to make
the clock in button appear only if they are not clocked in. But I can not seem
to make the sql statement or maybe my code is wrong, it needs to just get a
count to see if they have any entries that have 0 in the hoursworked column
and if so then it needs to just display the clock out if not then just the clockin button needs to be displayed this was my orignal code that was not working
<%
String statement = "select count(*) as cnt from TimeSheet Where idnum = " + session.getAttribute("IDNUM");
stmt.execute(statement);
rs = stmt.getResultSet();
rs.next();
int num = rs.getInt("cnt");
if (num == 0 || num == null)
{%>
<tr>
<td><input type="submit" value="Clock In" name="button"></td>
</tr>
<%}
else
{%>
<tr>
<td><input type="submit" value="Clock Out" name="button"></td>
</tr>
<% } %>but it did not work it would only display the clock out button so i need to figure this out so that the user can not clock into the program twice to get double hours and so forth.Does it even compile ?Yes, it wouldnt, not even in 1.5
it needs to just get a
count to see if they have any entries that have 0 in the hoursworked column
and if so then it needs to just display the clock out if not then just the clockin button needs to be displayed in which case,
1. your sql is not correct.
2. session.getAttribute("attrName") returns an Object - is the IDNUM column of type number
(going by the fact that you have not enclosed the value in single quotes '')
Assuming that you have a column called 'hoursworked' in table 'timesheet' and
IDNUM is of type NUMBER
<%
Integer idNum = (Integer)session.getAttribute("IDNUM");
//from the OP :: get a count to see if they have any entries that have 0 in the hoursworked column
String statement = "select count(*) as CNT from TIMESHEET where IDNUM = " + idNum + " and HOURSWORKED = 0 ";
//remaining stuff :: Look out for the error pointed out by Pgeuens
cheers,
ram.
Maybe you are looking for
-
I need to reformat my computer and I will loose my itunes, How do I go about getting all my apps free and paid back when I reinstall everything (Please someone help)
-
I have problem with creative zen xtra 60GB. i cannot copy music and data from and to player. i try everything what i could. I try clean up, reload os, update even format all. Nothing helped i still cannot copy. Please help me
-
Samsung BD-P2550 Blu-ray player
Hello, Would a Best Buy employee be able to enlighten me whether this player was discontinued or just simply not in stock? This player is available on your website, for local pick-up. However, when you actually go to choose a store, most stores don
-
Reference field value disappears on the Receivables transaction line window
Hi Everybody, I have below problem while creating the manual invoice from Receivables. when i am trying to utilize the reference field on the Receivables transaction line, so that it can be used to enter extra data for manual invoices. At the moment
-
FICA and AUDDIS Integration steps
Hi Guru's We are planning to Implement AUDDIS and we are using the FICA. I tryed to attached external format AUDDIS standard version to see the output, but it is giving dump and reason is below. Can anyone help me please. Thank you Termination occurr