In Phone USB Port Drivers

Does anyone know how to reapir or re-install the USB port driver on the device itself? I was talking with a friend and based on the info and problem I have been having with my device (windows detects and shows the device as malfunctioning), it appears that these drivers are either possibly corrupt or have been lost. Either through a virus or bad software that doesn't work with the phone. It would mean the world if I could get a link to download these and try it. The bluetooth works fine. But I cannot update to firmware 3 until the USB is working.

One thing you can try is to delete the USB devices on your PC.
Depending on which version of windows you are running this would be done differently.
In XP you go to Control Panel->System->Hardware then Device Manager. Under "Universal Serial Bus" or other sub categories you may see a yellow question mark or a red exclamation mark next to a USB device, select it and hit Remove (Delete) select YES to remove the device. Now try to connect again the phone to see if it's recognized.
I had a few instances where once the computer creates a corrupted device it won't try to re-install the device but it recognizes the device as being the same and just sits there.
Be warned that I'm not liable if you delete something else or you damage your PC. Follow these instructions only if you know how to do these system settings in your PC.
You have been warned!
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

  • My usb port drivers are not working

    i have purchaced new hp sleekbook os-win8, but after few days the usb drivers are not working what shoud i do
    This question was solved.
    View Solution.

    What did you plug into the usb port. 
    Have your tried multiple devices?
    When was the last time they worked?
    Try removing the drivers in device manager.
    Then reboot and let them reinstall
    If that fails the try a System Restore to previous date when they did work.
    Here is how to do a System Restore
     http://www.youtube.com/watch?v=CsY_FnyJzdo
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • R046tu USB port drivers.

    I have downgrade my windows 8 to windows 7. But when it is done its USB port do not function. I think the drivers is missing. But why? Please help me I need USB drivers for my Laptop. Thank you.
    This question was solved.
    View Solution.

    Hi:
    Here is the link to the usb 3 driver you need for your notebook:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5449369&swItemId=ob_132256_1&swEnvOid=405...

  • USB Port Drivers

    Dear Boss 
    My System Is Hp Pavilion a6700yPC Quad Core Tower
    My Problem Is 
    I Have Face The Problem Of USB Not Detecting From Front Side System And Back Side 1 USB Port
    I Have 3 Time Run From Scaning Drivers Then System Is Given To Me This Massage In Task
    USB Not Recognized
    Windows has stopped this device because it has reported problems. (Code 43)
    Please Sir Help Me Urgently Thank Fully
    My System 2 Front Side USB And 1 Back side USB And Front Audio Port Ur Hub Is Stoped 

    Reinstall the USB controllers.
    (From the Microsoft Support website) To disable and re-enable the USB controllers, follow these steps:
    Click Start, and then click Run.
    Note If you are running Windows Vista, click Start, and then use the Start Search box.
    Type devmgmt.msc, and then click OK. Device Manager opens.
    Expand Universal Serial Bus controllers.
    Note You might have to scroll down the list to find this item.
    Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
    Repeat step 4 for each USB controller that is listed under Universal Serial Bus controllers.
    Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
    Check the USB device to see whether it is working.
    I work on behalf of HP (But this isn't my job)
    Mark my post as “Accept as Solution" if you feel my post solved your issue, so that others with the same question can find the answer.
    Please give me Kudos if I wrote something that helped you.

  • H8-1534 Windows 7 Front USB port Drivers

    Had purchased a  h8-1534 and installed Windows 7 (64 bit) I got everything to work with the drivers provided BUT I can't get the drivers for the top (front) 3.0 usb connections. I can't find those drivers anywere for this computer. Its so frustruating. Please help.

    Please post the hardware ID for the USB3 controller needing the driver.
    Go to the device manager and click on the usb controller needing the driver.
    Then click on the Details tab at the top of the USB Controller window.
    Now you should see a Property drop down list and it is defaulted to Device Description.
    Drop down on that and select the second item (hardware ID's).
    Post the top string of characters you see in the window.

  • Old subject (USB port failure), new board member.

    After signing up here, I posted without having to log in.
    I guess that doesn't work so well :-)
    Shortened story: A135-S2246 upgraded to Win 7.
    System acts funky, so I do "clean install" of 7.
    Dreaded BIOS password issue arises, but I get past it.
    Like a good soldier, I upgrade the BIOS to 1.60 and install all of the Toshiba software for Win 7 clean installs.
    The USB ports now tell me that every USB device I own is defective.
    I've uninstalled all USB ports, drivers, etc., installed all drivers for my USB devices and tried to get Win 7 to manually recognize.
    I've Google until my Googler is worn out and can't find a real fix.
    NO LOVE.
    Before I order restore discs (FREE! with a cost of $24.95 to mail them to me), can anyone tell me if this is issue is resolvable?

    Satellite A135-S2246 
    I've uninstalled all USB ports, drivers, etc..
    A good start.
    Try disabling Selective Suspend. Open registry editor (regedit.exe) and navigate to the following key.
       HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Ser​vices\usb
    In this key, create a new DWORD value called DisableSelectiveSuspend and set its data to 1.
    Reboot.
    (KB817900 applies to Vista/7 as well.)
    -Jerry

  • How do I get rid of error code 2001/2006? My phone is in recovery mode. I have tried several different cords, all USB ports, my macbook, and a friends PC. This is the second time my phone has done this, the first time it was an easy fix.

    I have an iPhone 4. It is in great condition, always protected. A couple months ago, it randomly went black and wouldn't turn on. I put it in recovery mode, plugged it in to my MacBook Pro and would get error code 2001 then I'd get error code 2006. I read some different forums and many people said to try using a different USB port and different cords. The last cord I tried, worked and my phone was back. Last night, my phone did the same exact thing. So I used the same method I used last time, however nothing has worked. I tried plugging it in to a PC and that didn't work either. This seems like a hopeless problem that's going to continue to happen. Any advice?

    Soooooooo.... You obviously need to restore the device
    It seems that you have tried several options to restore it. What I would do is leave it plugged it and hold down the Home button AND the Power button together till you see the white apple appears. Then let go of the Power button but continue to hold the home button. You should get the message in iTunes again saying that the iPhone needs to be restored. Hit OK then RESTORE.
    Hope this helps!!

  • HT201210 how do i unlock my i phone, it shows an usb port connecting to the i tunes symbol and my screen is locked.  this started after i tried to perform the update on my i phone?

    As I was updating my Iphone, the screen froze with a picture of an usb port pointing towards the itune symbol.  now my phone will not reset.  Can anyone help me?

    Connect it to your computer, on which you have previously installed iTunes.

  • HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s.  With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

    I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s.  With the new iPhone 5 the radio shows the phone is conected but does not show any music content.  Any Suggestions?

    You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup.  If you haven't been doing this, start now and then restore your old backup.  You will then be able to sync the new contacts back into the phone.  However, you will lose all messages, etc newer thant the backup.

  • HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

    i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

    Have you downloaded and installed the latest version of iTunes from here:
    http://www.apple.com/itunes/download/

  • HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    - Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
    - Could you have damaged something when you took the iPod apart and replaced the Home button?

  • Iphone 4 makes an continuous intermittent vibration/buzzing sound when plugged into any of computer's 3 usb ports; does not show in itunes or Windows Vista device manager. No problem charging the phone with other power sources. What's going on?

    This problem happened intermittently in the past but now happens every time I plug in the phone. I suspect it might be a problem with my computer, an Acer Aspire 4530, perhaps with it's charging function via usb ports? The phone makes the same buzzing sound twice when I connect to other power sources, but continues when connected to computer. I have this issue even when the phone is 100% charged.

    This problem happened intermittently in the past but now happens every time I plug in the phone. I suspect it might be a problem with my computer, an Acer Aspire 4530, perhaps with it's charging function via usb ports? The phone makes the same buzzing sound twice when I connect to other power sources, but continues when connected to computer. I have this issue even when the phone is 100% charged.

  • When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working, help!

    When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working. help!

    I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
    Why are you posting in this forum about what occured with an independent service provider?  How is is at all relevant to Apple??  In fact, service by any person or business not authorized by Apple voids any waranty.

  • Using USB port for dial up networking with mobile phone?

    I am thinking of using my mobile phone as a dial up modem when i am away from home and it uses a data cable to the USB port. is there a way to use the USB port on a Mac as your source for the internet?
    Thanks
    Jason

    well i dont have the cable yet i just was wondering if that would work. Yes it has bluetooth but i was told you cant use the bluetooth for a modem. Dont know why the phone has the option. How would i set up that option?

  • Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

    I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work. 
    I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
    I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
    The drivers that are not working on Windows 7 32 bit are:
    Realteck RTL8188EE 802-11b/gn witeless lan
    Realteck ethnet die and
    Intel High definition graphcs driver 
    Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
    So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
    This question was solved.
    View Solution.

    Hi:
    Should be no problem to get W7 32 bit to work on that model.
    Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
    Your model uses the Intel HD graphics driver only.
    The first driver you have to install is the Intel chipset installation utility and then reboot.
    http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
    Audio:  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
    If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

Maybe you are looking for