In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

I don't quite know how to use the clone stamp tool in the Photoshop 2014 version. When I click on the clone stamp it creates a duplicate of the image and it moves around and I can not apply the clone stamp to the area I want to correct. How do you lock it down to keep it from moving?

Hi Smoothery4501,
The Photoshop clone stamp tool allows you to copy one area of an image and copy it onto another area.
Click on the clone stamp tool then press the alt key on the keyboard and click on the image to define a source point.
Please refer to below blog for further info
Clone Stamp Tool « Julieanne Kost's Blog
Thanks

Similar Messages

When using the clone stamp tool and press the alt key layer just moves

when using the clone stamp tool and press the alt key to set a point it seem to create a new layer and just moves the layer arround. I can not get the clone to now work. what did I do?

Open the Clone Source panel. I think you'll find the Clipped option is disabled. If so, enable it.

HT1229 How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what.

How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what. When you have several thousand photos it is difficult to determined what is what.
Why does iPhoto have the ability to put photos in events and to give them descriptions if it doesn't transfer this info with the photo. I want to back my photos up to an external drive.

The simplest way to achieve what you want is to back up the iPhoto Library. That will get everything.
You sem to be exporting from iPhoto to the Finder. The Finder does not have the same organisation capabilities as iPhoto. If you're going to do that you need to understand some of the differences between the two.
Event Name will become Folder Name.
'Description Name' I guess is the Title you give the Photo
Jpeg Number is the File Name assigned by your camera.
So: File -> Export
Set your Kind to Jpeg
Select your preferred Quality
Check the Boxes at 'Titles and Descriptions' and Location Information
Under FIlename select 'Use Title'
Click on Export. In the Next Window choose a New Folder as your export destination and then Name that as you prefer
Regards
TD

My husband and I both have iPhones . How do I use one account for purchases and keep the email separate when using iCloud?

My husband and I both have iPhones . How do I use one iTunes account to share music, photos and apps, and keep our email accounts separate since all data will use the iCloud function.

You shouldn't be using the same account on phone iphones. Have him setup his own and make sure his iCloud is logged in with that one

"Could not use the clone stamp tool because of a program error". How to fix this fault?

When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!

Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

How do you save changes made in iPhoto, and export the changed file. It keeps reverting back to the original.

How do you save changes made in iPhote, and export the changed picture file? When I select export, current format, it reverts to the original, wiping out all my work.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Adobe photoshop elements 9 . i cannot get the circle to appear on clone stamp tool and spot healing

adobe photoshop elements 9 , i cannot get the circle to appear using clone stamp tool and the spot healing brush . i`ve tried restating my computer and unloading and loading the adobe disc . but still no good .

I had this same problem and was searching for answers. I also prefer using a circle instead of crosshairs. I hope you've figured it out by now, but, if you haven't, here is the answer (I am using Elements 9, but, it should work for other versions I think):
1. Open up Elements Editor, Click on Edit, Click on Preferences, Click on Display & Cursors.
2. Under Painting Cursors, select Full Size Brush Tip
3. (optional) - if you want crosshairs within your circle, then also select Show Crosshair in Brush Tip.
4. Click ok.
Now use the brush, and it should have a circle to use.
P.S. Sometimes if you have your Caps Lock key on, that removes the circle as well.

Problem using the clone stamp tool in cs6 64 bit

I am trying to use the clone stamp tool, however each time I alt click on a PC runing system 7- 64 bit and try to clone an area, I get a window stating that I have not defined an area. Alt clicking again does not solve the problem. I work in a computer lab and this option works fine on our Macs using option click in PS CS6.

If »Show Overlay« is checked in the Clone Source Panel is the cursor showing the source imagery?
Could you please post a screenshot with the pertinent Panels visible?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Could not use the clone stamp tool because the area to clone has not been defined

Freshly installed Elements 10. Can not use the option-mouse click to define an area for the clone stamp. The error I get is:
Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point).
New Mac Mini. Had the same problems in Elements 9 so I installed the 10 trial. Is this a key binding error? Did not have this issue with Elements 9 on my Mac Air or my Windows 7 system.
I'm not a newbie and know how to use the clone tool. I won't say I'm an expert so if it's something related to layers please throw out some ideas.

This problem came back up. I hadn't used PSE since last November and was frustrated to run into it again. I don't think it's a layers issue afterall.
I use a wireless keyboard and mouse on Mini and mouse on Air, although keyboard for Air is upstairs at a desk with monitor for occasional use. Regardless blue tooth is on for these devices. Problem exists. Turn bluetooth off on Air and the problem is gone. It must be related to option key when bluetooth is on, I guess some different mapping. Even when I have bluetooth on and try to use Option key on the Air keyboard it does not work.
So now where do I look for configs to check?

Could not use the clone stamp tool because the area to clone has not been defined (option-click to d

Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. can any one help? I have reset the tools restrted my computer. i am at a loss...

Are you working with more than one layer? If you are working with multiple layers it makes a difference when selecting source spot and then trying to clone to a different layer. I find that I have to be sure I am selecting the corresponding layers for source and then for application when working within multiple layers.
At least for me this is the case when getting that type of message. I am very new to this program though, so maybe someone else has a more concise answer for you.
Good luck and write again if this doesn't help.
Moon52
Sent from my iPhone

How can I change the Apple Store language and keep the country of residence?

How can I change the Apple Store language and keep the country of residence?

Users do not have control over the language of the Mac App Store or iTunes stores for a particular country or region. It is what it is and can't be changed.

Program error when trying to use the clone stamp tool - PSE 8

When trying to use the CLONE STAMP TOOL, getting the following: "Could not use the clone stamp tool because of a program error".
Runnng PSE 8 on Windows XP/SP3. I purchased the key to have a full version, versus the 'trial version'. I also have Photo Essentials 3 installed and have used it without any problems.
Any suggestions?

I figured it out - it was ID 10 T error...ugh.
Was following along in a book and blindly did what it said....was forgetting to hit the 'alt' key when first defining the area to clone....
However, it was kind of a confusing error message - something like "clone area not defined" would be more of a help.
thanks.

How do you move itunes to a new computer, keeping the songs in the library?

I have a laptop now and would like to move the itunes from my home computer to my laptop. Is there a way to move it and keep my purchased songs in the library?

Probably the most straightforward way to get iTunes onto your second computer is to network it with the first one and copy your iTunes folder across. Start by consolidating your library. When you consolidate, any songs in the iTunes Library that are not in the iTunes Music Folder are copied to the Music Folder and the Library is updated to point to those new files. Files already in the iTunes Music Folder have no changes made to them: Copying all your iTunes files to one location - Windows
Copying the whole folder brings with it the iTunes Music folder and also the iTunes Library (iTunes Library.itl in Windows) database file which holds all the information about your songs (Playlists, Ratings, Play Counts, Last Played, Date Added, etc). You'll get more information including the Folder/File structure in this article: What are the iTunes library files?
When you copy the iTunes folder make sure you put it into the default location on the new computer. On a PC this is \Documents and Settings\Username\My Documents\My Music\ (or C:\Username\Music\ in Vista). You should also use the same version of iTunes on both computers.
You can also use this method with an external hard drive, you drag the folder from the first computer to the external drive and then from the drive to the second computer.
If you have and iPod, some iPods can be used as an external drive and you can use them to move your iTunes (this option isn't available with the iPod Touch): How to use your iPod to move your music to a new computer
If you have any iTunes purchases in your library don't forget that you'll need to authorise your new computer to play them. Also if you are disposing of the old one remember to deauthorise it so you don't use up one of your allowances: About iTunes Music Store Authorisation and Deauthorisation

How do I unable the preview in the clone stamp tool in elements 11

How do I unable the preview, in the clone stamp in elements 11. I find it more anoying than usefull

If this is a question for Photoshop Elements, you should probably post it to the Photoshop Elements forum, Hazyy.
http://forums.adobe.com/community/photoshop_elements

In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

Similar Messages

Maybe you are looking for