In Photoshop CC timeline, when I add an audio track photoshop CC either quits working or it skips to the end of the video clip. If I just put in audio it works fine. If I just put in clips or pics it works fine, but now when audio is added

When I try to use the timeline portion of photoshop, I can't get the audio to work with my clips. I can get audio to work fine when using just audio, but the minute I try to add audio to a set of clips either photoshop quits working or it skips to the last clip in my show. I don't understand why this happens. I am using the same track each time. Very frustrating.

Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

Similar Messages

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I'm having an intermittent problem with my midi controllers triggering Mainstage 3. I'm using a PreSonus Firebox audio interface. It's been working fine for months, but now when I first turn on the computer in the morning , I'm not able to trigger Ma

I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
I’m using a PreSonus Firebox audio interface.
It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard. I tried different midi controllers, different keyboards, different midi cords, and check midi preferences. The audio interface is working fine and is recogonized, but the midi doesn’twork. I re-started the computer several times and then finally it miraculously starts working again.
I’ve been having to this every day now. Any help or ideas is very much appreciated.

I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.

Hi, i have a user that is working with the Adobe acrobat 9 standard. when he adds a stamp to a PDF that he opens from an Email in Outlook, this is the error he gets. (snapshot in the attached files)

hi good morning,
I have a user that is working with the Adobe acrobat 9 standard. when he adds a stamp to a PDF that he opens from an Email in Outlook, this is the error he gets. (snapshot in the attached files)
can you help us with this problem?

Hi, thanks for the fast response.
This is the Extended Font Pack i have installed on the Terminal server.
what do you mean by properly embedded? how can i check that?
BR
Eric Mizrachi

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

Playhead randomly JUMPS to the end of the timeline when "editing" during playback

CS 6.0.1
OSX 10.7.4
I love the new feature in CS6 that lets you edit DURING playback, and playback won't stop. Brilliant.
Now, I use this feature a lot making cuts as I go. I use the "command + shift + k" combo to make an edit to all tracks while the playhead is moving along. It seems though that every so often when I do this, the playhead warps to the end of the timeline. Very frustrating, and when dealing with long timelines,really slows me down, to get back to where I was working.
Also I can repeat this "glitch" very easily, so its not some totally random occurance. Just pushing cmd+shift+k while the playhead is moving a few times repeats it very quickly.
Am I doing something wrong here? Or toggling some OTHER key command inadvertently? Or is this a legit glitch?
EDIT: I would like to add that using the "nudge" command during playback has the same glitch of arbitrarily jumping to the end of the timeline if you click the nudge command quickly in succession.

This issue was NOT resolved by manually installing all cs6 updates that were failing with adobe product manager, then doing a clean installation of the latest drivers from Nvidia's website using the ODE (Optimal Drivers for Enterprise) Graphics Drivers.
The issue came back after editing for a little bit., however this following fix worked:
*FIXED BY ADOBE TECH SUPPORT INDIA*
The solution was to delete all media cache files and all cache settings for the specific project. Check all your cache locations and encoded media file locations.
Rebuild project on load.... edit. Thanks.

I've installed Photoshop Elements 12 on my PC computer. Although the installation message at the end noted the installation was successful, when I tried to double-click on the desktop icon, it won't open. Any ideas?

I've just installed Photoshop Elements 12 on my PC computer. At the end of the installation, I received a message that the installation was successful. I then tried to click on the desktop icon, but it won't open. Any ideas as to what could be going on? Thanks very much!

This worked for me
Sandeep Singh (Official Rep) replied to this problem:
Elements 12: Editor will not Open
Hi Kimberly,
Please follow these steps:
Try to rename SLCacje to Slcache.old
C:\Program Files (x86)\Common Files\Adobe
and
SLStore to Slstore.old
C:\ProgramData\Adobe\SLStore
and Right Click on the Photoshop Elements 12 icon and run as administrator
Let me know if this works.
Thanks
Sandeep

Why has the Reload button shrunk and shot to the end of the URL window? How will I find out when the Favloc plugin works in V4?

I had installed Firefox 4, but rapidly had to backtrack to 3.6, then again to 3.5. Two reasons: 1. The three toolbar buttons I use most are Back, Forward and Reload. In 3.5 I can group these nicely at the left hand end; in 4 the Reload button has shrunk and shot across to the end of the URL bar. Why?
2. Versions 3.6 and 4 are incompatible with the Favloc plugin. This is such a brilliant plugin you ought to buy the code and build it in. I am marooned in 3.5 until this plugin works in V4 - running 3.5, how will I find out when it does?

As far as I know, [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ the Classic Theme Restorer add-on] is the only way move the Reload button outside the address bar.
# Install [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ Classic Theme Restorer] and restart Firefox when prompted.
# Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
# Next to Classic Theme Restorer, click the Options button.
# On the Main tab, make sure "Movable back-forward button" and "Hide urlbars stop & reload buttons" are checked. You might also want to check "Combine stop & reload buttons". Close the options window when done.
# Right-click an empty area of the tab bar and choose Customize.
# Drag the Back/Forward, Stop and Reload buttons onto the navigation toolbar.
# Click the Exit Customize button in the lower right corner when done.
That being said, I should point out that you can reload pages in other ways.
* Right-click any tab and choose Reload.
* Right-click an empty area of the page and choose Reload.
* Press F5.
* Press Ctrl+R (Mac: Command+R).

When applying a transition between particular clips it only applies to the end of the previous clip and will neither 'Center on Edit' nor 'Start on Edit'. I'm kind new to FCE 4 so please excuse my inexperience.

When applying a transition between particular clips it only applies to the end of the previous clip and will neither 'Center on Edit' nor 'Start on Edit'. I'm kind new to FCE 4 so please excuse my inexperience.

This indicates that you only have handles available on one side of the edit point. If the transition ends on the edit, that means that the next shop begins on the first frame of the media file and there is no room for it to extend and create the necessary overlap.
Click <a class="jive-link-external" href="http://www.fcpbook.com/Effects1.html">here</a> to find out how transitions work.

Does the end of the year upgrade policy also include just Photoshop?

I understand CS3 and CS4 are eligible for upgrades to CS6 until the end of the year, but what about upgrading from PS4 to PS6? I normally upgrade to every version, but due to being layed up for 8 months with a knee injury money is extremely tight, so I was planning to wait and upgrade from CS4 to CS6. I heard about the new (now old) upgrade policy so I upgraded to CS5 a few days ago. Now I see that Adobe changed the upgrade policy again. Now I'm wondering if I can return CS5 and wait to upgrade to CS6 later in the year when I have more cash flow.

Hi Coldrake
Yes, all CS3 and CS4 products, whether they're a suite or stand-alone product, like Photoshop, as a one-off arrangement this year only, can wait 'til December 31st 2012 to upgrade directly to CS6... of course, we don't know how much that will cost!
Thank you, pf22, that answers my question perfectly. I'd love to keep PS5, especially with the discount, but as I said, after being off work for so long, money is extremely tight at the moment and will be for the next couple of months.
Of course we also have the "Grace Period" coming up where you could purchase the CS5 upgrade and get CS6 for free
It looks like it's going to be a few months before PS6 will be coming out, so I may be able to swing that, thank you for an excellent suggestion.
Thank you Noel for covering all the bases! I don't have the suite, just Photoshop.
Thanks for both of your replies, they are greatly appreciated.
Larry

I have an Iad2 and ever since ios6-there are issues.I get occasional lock-ups and have to reboot. The WSJ app freezes when running their videos to the end. The only work-around is to stop the video before it's over. Worse than windows me !!!!!

My Ipad2 worked perfectly before ios6 upgrade. It now freezes occasionally and I have to reboot to get it to work. Also the WSJ app will now freeze if I try and run one of their videos that is imbedded in the article. My only work-around is to stop (press done) before the end of the video or I have to do a total reboot. The problems remind me of Windows ME . Will Apple resolve these issues or become more like Microsoft. Hopefully there will be a restore button in the future like Microsoft was forced to do because a lot of upgrades are just terrible. Am I crazy or are there other people having the same issues with ios6, or could this just be a coincidence and my ipad2 is starting to fail just when ios6 arrives ?

I know this will not help but, the bluetooth headset I purchased for my wife works great and it pairs with our car and our sound bar in the livingroom (Motorola Droid Razr) 98.72.16.XT912.Verizon.en.US
However I did not upgrade over the air but from a android web site and placed it on my external sd card. I believe this made the difference in why we had no issues and upgraded functionality has been great.
Please note when I mention these bluetooth devices I mean the Razr connects with no problems.
It also had no internet issues and none of the problems others have complained about in other threads.
unfortunately when you say thousands have these issues I cannot say that is accurate. The hope is when large numbers of owners have updated to the Jelly Bean and are complaining inmase then Motorola will issue a patch to verizon to get out to the affected users.
Of course now that Google owns Motorola Mobility and has laid off loads of workers it may never issue an os patch.

Osx 10.7.4 safari 6.0 when I add a new bookmark to the "bookmarks menu" it is added somewhere in the middle instead of at the end of the list. this just started a few days ago after an update. Has anyone else noticed this?.

osx 10.7.4 safari 6.0 When I add a new bookmark to the "bookmarks menu" it is added somewhere in the middle instead of at the end of the list. This just started a few days ago after an update. Has anyone else noticed this?.

Just for those who are interested, this is what cleared the "bookmark menu" trbl I had.
Open System Preferences > iCloud
Deselect the box next to Bookmarks, then reselect it.
Quit and relaunch Safari. Try a bookmark again.

Ipod 7th generation not recognized by windows 8? it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.

ipod 7th generation not recognized by windows 8? it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer. help?

Hi stitchinstar!
I have an article for you that will help you troubleshoot this issue with your iPod and iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for using the Apple Support Communities!
Cheers,
Braden

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted but then it asks for a serial number for a full version of a product which men is design premium cs3 but it doesn't give me that product as a choice from the drop down menu. it only gives me adobe master collection cs3. why when i have purchased all these different upgrades can i now not use them and how can i sort this out. i need cs5.5 on my new computer.

Contact Adobe support:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

TS1363 i have a new iphone 5 and although I had a little trouble downloading all my apps and music, i did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help

I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help?

Hey leafxxx,
Thanks for the question, and welcome to Apple Support Communities.
The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
Apple - Support - iPhone - iTunes Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/itunes/
For more detailed instructions, see this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Enjoy your new iPhone 5!
Matt M.

When I type an address in the location bar and hit Enter nothing happens. I must click the arrow button at the end of the location bar. How do I fix it so that the Enter key works?

When I type a web address in the location bar and hit enter nothing happens. In order to go to the website I've typed in, I must click the arrow button at the end of the location bar. How do I make it so that hitting the enter key takes me to the web page.
== This happened ==
Every time Firefox opened
== Since Firefox 4 Beta installed an update

The AVG addon seems to have caused the problem for me. I had it disabled and everything worked. Then I updated to AVG 2011 and the problem occurred. It seems to have reenabled itself after the update.
Just disabling it solved the problem.

In Photoshop CC timeline, when I add an audio track photoshop CC either quits working or it skips to the end of the video clip. If I just put in audio it works fine. If I just put in clips or pics it works fine, but now when audio is added

Similar Messages

Maybe you are looking for