In PI 7.1, condition editor does not show the outbound interface structure

Hello,
I am using PI 7.1, I need to use condition whild determing receivers. So I opened the condition editor, then open the expression editor, select XPath instead of Context object. I would expect that the outbound interface structure appears in the box underneath the XPath, so that I can navigate the structure to choose the field I want to use. However nothing appears here. Do you knwo why is that? Or do I need to do anything to bring up the outbound interface structure in the expression editor?
Thanks
Jayson

Hi Jayson,
I had the same problem
the use of context objects and the value help for xpath is available for XI3.0 interfaces in PI 7.10 only. The functionality for "new" interfaces has been implemented in 7.11 only.
you have to use xpath w/o value help.
I have created a context object in one of our 7.10 test systems, and indeed I was unable to use it in a receiver determination unless the service interface pattern is "Stateles (XI 3.0 compatible)". If you were to change the service interface to that pattern, you have to change the operation name unless it is already identical to the interface name. So that may not be an option for you.
It was possible to use the context object in a receiver rule but then I could not activate the receiver determination because the software component version was supposedly unknown. I will check with my PI contacts - please let me know if the change to "XI 3.0" interface would be a possible workaround for you.
Try the steps which I am giving below, although it's a workaround and don't know the exact reason why it is failing.
1. Open your Outbound Message Interface (which you are using in your Receiver Determination) in IR, edit it and change the Interface pattern (which is there just below the category "Outbound") to "Stateless (XI30 - Compatible)" , save it activate it.
2. Follow the same step for your Inbound Message Interface. Change the Interface Pattern from "Sateless" to "Stateless (XI30 - Compatible)" .
3. Go to ID. Remove your Outbound and Inbound Message Interface from their respective Business Service/Comp and add it again.
4. Create your your receiver determination again using the Outbound and Inbound MI you have changed.
5. Open condition editor of your receiver determination.You should be able to see your Message Interface and can choose the XPath.
Thanks,
Raj
Edited by: raj reddy on Jan 21, 2009 5:41 PM

Similar Messages

  • Windows control panel routine to designate Elements 12 as my default editor does not list the program. It loaded OK and accepted the key. Your regular help line could not help. What to do?

    Windows control panel routine to designate Elements 12 as my default editor does not list the program. It loaded OK and accepted the key. Your regular help line could not help. What to do?

    Hi Robbie,
    The editor program is NOT under the organizer path as you mentioned in your last message. The actual editor program is at the location I gave in message #1 i.e. as follows
    "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
    The one under the organizer is actually the Welcome screen which you have probably set up to go directly to the editor.
    If you go to the Open With screen I showed in message #3 and browse to the actual editor as given above, it should show up in your list.
    If it doesn't, then Windows is playing up again - and we have to take extra steps.
    Brian

  • Acrobat Pro "save as" function in the file menu does not show the current directory of the file

    I have installed CC but Acrobat Pro gives me headaches.
    The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
    It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
    I use Windows7 professional 64bits.

    I use what seems to be the latest version available on the Cloud:
    To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
    So here it is, open:
    When I do a "Save as", it takes me to a totally different place on the disk!
    Very annoying...
    Thanks for your time!
    JJ

  • Field Explorer in Crystal Reports does not show the same names as Bex Query

    Hi
    I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
    In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
    It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
    I would like it to display the field explorer as shown in this blog.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Thanks in advance

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
    Ingo

  • HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

    I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

    iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

  • Why this query does not show the result?

    Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
    SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
    select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
    ERROR at line 1:
    ORA-00933: SQL command not properly ended
    SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
    no rows selected
    SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
    DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
    69662              HR                                 TABLE
                       OE                                 SYNONYM
    SQL> SELECT USER FROM DUAL;
    USER
    SYS

    Hi,
    the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
    Herald ten Dam
    Superconsult.nl

  • Report does not show the main section while calling from forms 6i

    Hi
    I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
    But when i run the same report independantly from report builder it show the both header and main section with relevent data.
    pl solve the matter
    thanks in advance

    can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

  • My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
    It seems to be Apple bug.
    Thanks for you efforts

  • I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

    I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
    do I have to partition it and name it first. -- if so just one partition?

    Do this:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.

  • ME23n , Does not shows the values correctly in print preview

    Hi,
    When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    If its 2 or more words, it shows correctly.
    If its 1 word, then its not showing!
    Why it is happening like that? Any ideas how to resolve this issue?
    regards.
    zerandib

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • My playlists show how many titles are in the playlist but does not show the list of titles

    my playlists show how many titles are in the playlist but does not show the list of titles. Is there a setting that I hit by mistake to hide the content?

    Perhaps you have made one column extra wide and the window isn't currently showing the Name column. Try resizing columns, turning off those that you don't need, or scrolling sideways.
    tt2

  • I have an I phone 4s and I have many contacts in my phone.  However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number.  I have checked every setting I can think of ?

    I have an I phone 4s and I have many contacts in my phone.  However, when my phone rings or I receive a message.  The phone does not show the name of the caller.  It only shows the phone number that is calling.  I am sure this is a setting problem, but I have checked every setting I can think of.  Any suggestions??

    If you are a Verizon user try this:
    Open the phone and dial *228. This is a Verizon over-the-air programming number.
    When the system answer press 1 for "Program or activate your phone"
    Wait for the call to disconnect. You should get a prompt stating "Settings updated."
    Double tap the Home button to bring up the recently used apps list at the bottom.  Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
    Wait a 3-5 minutes.
    Try your phone again and see if it's fixed.

  • ' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

    ' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

    mardemar wrote:
    ... - the only one without an x delete button.
    What is the name of this App and where did you get it...?

  • File name does not showing the InDesign icon?

    I have got few files from my client and they said it is an InDesign CS2 version file. but the file name does not showing the InDesign icon on the file name, though I have CS2 and I have tried other version too.
    Also I could not open the file in any version.
    Can somebody help me?

    there is no screen shot...
    You must either post a link to it on another server or embed it into a post using the camera icon on the web page like this:

  • HT4352 appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?

    appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?

    ccooper52
    check out the tips and video at the bottom of this link and see if any of it helps
    http://www.allabouthomeelectronics.com/apple-tv-airplay.html
    Apple policy requires we mention we might benefit or profit somehow by your visit
    please let us know if this helped

Maybe you are looking for