In PIR condition screen

Hi
In PIR Condition screen, if we select back button or any other details, getting the error as `Condition Type FRB1 is not in procedure RM0002.'
Couldn't understand the issue.
Pls help.
Thanks
Mohan

you probably have the FRB1 condition used  in your conditions to the info record.
But the procedure RM0002 this condition was removed.
Means you have to either remove FRB1 from the conditions of your info record, or you have to include the FRB1 in procedure RM0002
Edited by: Jürgen L. on Sep 4, 2008 5:07 PM

Similar Messages

  • PIR net price not follow the condition screen

    Hi all,
    I have a question regarding my pricing condition maintained in a PIR.
    In one of my PIR record, there is two validity line records in the pricing condition with the following date range and value:
    1 - 2008.04.01 to 2010.12.31 ==> PB00 is USD853,00/1 PC
    2 - 2011.01.01 to 2999.12.31 ==> PB00 is USD853,00/1 PC
    However, the strange thing is that in the Purchasing Org screen in the PIR, the NET price value is "879,00 per 1pc" even with the VALID-TO field value as "2999.12.31".
    May I know why the the Net price in this view not picking up the USD853? Something go wrong in the PIR?
    (in between the Pr Date Category is 2-delivery date).
    Please help.
    tuff

    Hi Jurgen,
    I am still a little bit confuse as of why in the Purchasing Org screen in the PIR, the NET price value is "879,00 per 1pc" even with the VALID-TO field value as "2999.12.31".
    Question1-
    Shouldn't the above field automatically pick-up what is maintained in the condition screen of the most latest pricing record which is the USD853,00 for the second line item I described previously?
    Question2 -
    What have caused the 879,00 being inserted into the Purchasing Org screen in the PIR, the NET price field? where is this USD879,00 coming from??
    Thanks and please help.
    Tuff

  • While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

    While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • How to hide the Condition types in item condition screen in Sales Order ?

    Hi Experts,
    We got new requirement from the Client. Pricing Condition types  are ZZBG, ZPBG, ZPBA, ZFSG, ZBDG and ZBHG part in Pricing Procedure. These condition types have Condition records. These need to be hidden in Item conditions screen in Sales Order but other status of the conditions remain unchanged. Pleas provide me the solution earliest  How this we can achieve in a best way.
    Best Regards,
    Srikith

    Hi Srikanth,
    You can achieve this using CONDITION EXCLUSION.
    Maintain Condition exclusion for first condition type its Exclude the condition types which are below to that.
    You must set a condition exclusion indicator for the price. You can do this in two ways:
    If you want to set the condition exclusion indicator a follows then you specify it:
    1..for all condition records of a condition type (e.g. with condition type PR00) when defining a condition type in SD Customizing
    2.for an individual condition record (e.g. only for material 4711) in the detail screen of a condition record (in the Condition exclusion field)
    Hope this will helps you
    Dasaradha

  • MY iPhone 4 after  being updated to iOS7 will not download or update any apps. When i press the button on my device to download a new app the loading wheel appears then in a few seconds disappears. I dont get a terms and conditions screen or anything.

    MY iPhone 4 after  being updated to iOS7 will not download or update any apps. When i press the button on my device to download a new app the loading wheel appears then in a few seconds disappears. I dont get a terms and conditions screen or anything.

    Ive tried using wifi and 3G seperately. Ive tried restarting the phone. Ive tried restoring it from a backup but none of these have worked yet.

  • HT4623 Terms and Conditions screen hangs when updating to iOS 8.0.2 on iPhone 5c

    I have iOS 8.0 (12A365) on my iPhone 5c. The phone has 32 GB, 16 GB available.
    Tried to update to iOS 8.0.2 over the network, but after touching "Agree" on the pop-up from the Terms and Conditions screen, the Settings app froze. The screen did not close, and everything on it became un-responsive. The home button still worked, and other apps still worked, but I had to reboot the phone to get back to a usable Settings app. I'll try updating via iTunes next. Meanwhile, has anyone else had this problem?

    FWIW, updating via iTunes (11.4 on Windows 7) worked

  • HT1657 Stuck on Terms and conditions screen after download how do I watch my rented movie

    Stuck on terms and conditions screen after downloaded rentle movie how do I watch

    If you are seeing the Ts & Cs link in the Downloads tab in the iTunes app then that just means that you don't have any ongoing/queued downloads - your film has finished downloading and should be in the Videos app (iTunes on the iPad is just the iTunes store) :

  • VA02: protect a line in condition screen depending on a type condition

    Hi all,
    I need to protect a line in condition screen depending on a type condition
    using the transaction VA02.
    Does anybody know the user-exit to do this ?
    I thank you in advance.
    Best Regards.
    Paolo

    Hi,
    I believe you cannot do it on condition basis...unless if you want to modify standard sap code.
    In the condition type config V/06..In the "changes which can be made" section there is an input for manual entries...there you can give D to not allow to change the condition ...
    Thanks
    Naren

  • Condition AZWR Not appearing on billing condition screen

    Hi,
    While creating the partial milestone biling, on the second line item I am not able to change the value of AZWR condition in billing screen.
    Biiling condition screen has greyed out & AZWR value is not showing on the condition screen. Does it has any correlation with FI setting?
    Although AZWR is manual in the pricing procedure.It has all required setting there like calculation type 48 and it's placed correctly in the pricing procedure.
    I need immediate help on this.
    Regards
    Suman

    you need to do price analysis in your invoice (run VF03)
    check your cond.type in V/06 and cond. record in VK*
    do you update pricing in copying control (there should be "B")?

  • Custom Fields to Contract 'Conditions' Screen

    Hi
    Please share how to add custom fields to Contract 'Conditions' screen just like 'Unit Price'.
    As there is no '_CI' table for conditions table, we are not able to implement the same. We also tried using BDT but to no avail.
    Regards, Sekhar

    Thanks for the reply Bala
    The requirement is to add three more informational fields beside/below the Unit Price. Those fields should hold data, condition wise. i.e. it requires to add 3 more columns in VICNCN table to which I'm afraid there is no custom include available. Also we referred note 690900. Please help how to proceed.
    Thanks, Sekhar

  • Formula Variables in 'Condition' Screen

    Hi
    I have 'Date1' as a characteristic. I want to apply for condition on this 'Date1' characterstic.
    So i created a 'formula variable by using replacement path' for this 'Date1' characteristic . And i included this 'formula variable' in an NewFormula in Columns of Query Designer.
    Then im trying to put 'Condition' on this   New Formula . When i try to give the Formula Variable in the condition screen at bottom.
    Then it says that the Formula Variable doesn't exists . Why it is like that
    Cant we use the formula varaibles in condition screen (at bottom of condition screen). Please let me know
    kumar

    I am not very sure but I think we cannot use Formula variable with replacement path in condition.....
    The variables with replacement path cannot be used everywhere as we use the customer exit variables. May be that is the reason but still I would say I am not very sure about this

  • Mass deletion of PIR conditions

    Hi all,
    when we delete a PIR using ME15, the condition records dont get deleted ..right? I mean the deletion indicator in the condition record does not get ticked...right?
    How can execute a mass deletion of PIR conditions?

    even deleted info records are taken into consideration at price determination.
    this is explained in OSS note 456691:
    a plant-dependent info record and a cross-plant info record exist.They are both flagged for deletion (EINE-LOEKZ).Why is then the price of the cross-plant info record still used during the creation of a purchase order?
    Answer:
    Since the corresponding condition tables are read by an external SD module, the information on the deletion indicator of the info record is not available there.
    You can only set that the conditions of the cross-plant info record are to be read, if the plant-dependent info record is deleted, by means of a corresponding transfer parameter (komp-no017, set in module ME_FILL_KOMP_PO).
    For the case that both info records are deleted you have the option of changing the validity period of the conditions to a past date or archiving the info record.
    you can archive deleted conditions independant of info record archiving.
    Short instruction can be found in OSS note 209094

  • About hide special condition type in sales order condition screen

    Hi all,
        I have such requirement:
        Customer want to hide some condition type in sales order condition screen.
        I have tried the authrization object :V_KOND_VEA  but it only controll the master data level
        and the special still show on the condition table.
        I have also find any user exit in SD module:
        USEREXIT_FIELD_MODIFICATION (module pool SAPMV61A, program MV61AFZA)
        But it looks like a system modification, and need the modification key.
        So, is there any solution such as enhancement or configuration to meet this requirement?
    Many , thanks.

    Check this thread where similar requirement was discussed
    [Condition Type |Condition Type]
    thanks
    G. Lakshmipathi

  • Need to add Fied for GCV NUmber in Sales Order Item Conditions Screen...

    Hi Friends,
    I Have a requirement Where I need to Calculate the Base Price by Useing the GCV Number, Which is Entered Manually because it may change for each Order.....
    I Going to Screen Exit for Sales Item Condition Screen for This GCV Field and make Mandatory for "X" Sales Document Type.
    Can any Body Give Steps Procedure for Enhancement as I am A Functional Guy.
    Regards,
    Mahadev..........................

    Hello.
    You will put this condition mandatory to your pricing procedure, not for sales document type.
    You need to create a condition that will be marked with Manual and Mandatory in pricing procedure.
    This condition GCV will be a percentual or a fixed value?
    regards.

  • Header Conditions Screen in Sales Order

    Hi!!,
    The issue is related to the fact that all the calculations are correct but the way it shows the prices at header and Item conditions screen is different.
    We mostly have Item pricing and the schema of the Pricing Procedure is such that it has group of conditions types like Base Price, Discount, Surcharges, Freight, taxes . After each of those condition types there is subtotal which have been assigned to the standard KOMP KZWI1-6 .
    On the Item condition screen every price including the one coming from condition type and one which flows to the subsequent subtotal is properly seen  but when it comes to Header Conditions screen the Subtotal 1 which is Base Price Subtotal is showing zero.The Base Price condition type though comes with the correct amount(FYI - The base Price Condition Type is a Price Condition).Surprisingly all the other subtotals like the ones for Discount and surcharges are seen with the respective condition types with correct amounts.
    The final total though is again correct.
    Can anybody tell why does it behave this way...Is it standard SAP function?
    Helpful answers would be handsomely rewarded.
    Thanks/Ani

    Hi,
    Do you have any user exit implemented, normally this not the standard behaviour, my experince is that the behaviour will be changed due to user exit.
    Regards,
    Murali

Maybe you are looking for