In place upgrade from R1 to R2 2012

Is it safe and supported to do an in place upgrade from SCCM 2012 SP1 (R1) to SCCM 2012 R2?

Yes it is.  See
http://gerryhampsoncm.blogspot.com/2013/10/in-place-upgrade-sccm-2012-sp1-to-r2.html
And the official TechNet guide here:
https://technet.microsoft.com/en-us/library/jj822981.aspx?f=255&MSPPError=-2147217396
Jeff

Similar Messages

  • Cannot perform in-place upgrade from WS2012 to WS 2012 R2

    Trying to upgrade from
    Windows Server 2012 to Windows Server 2012 R2 The following occurs:
    Copy install files to install directory on local system
    Click Setup.exe.
    UAC requires acceptance.
    Windows Server 2012 R2 appears.
    Click Install Now Button.
    Message: "Setup is copying temporary files."
    Message: "Setup is starting."
    Splash screen reappears.
    Cannot get beyond this to the wizard. Tried safe mode, tried from mounted ISO, tried from Install directory with setup files.
    No indication of error in any Windows logs.

    This issue was solved in another post here is the posted resolution:
    RESOLUTION:
    Process      monitor (saved the pml file - 144MB) gave me a command line launch      statement:
              C:\$WINDOWS.~BT\Sources\setup.exe /runlocal      /BTFolderPath:C:\$WINDOWS.~BT /OSImagePath:"z:\Sources"      /HideWelcome /uilanguage:en-US /targetlanguage:en-US
              If I run the above command from Start-->Run I get the first      Windows Setup screen "Get important updates for Windows Setup. 
    Select No thanks, I'm prompted with the      operating system options, next, license terms, next, upgrade (selected) vs      clean install, next and then Windows Setup fails with message,
              "Windows Setup cannot locate a valid hard drive to store      temporary installation files.
     http://msdn.microsoft.com/en-us/library/aa367988(v=vs.85).aspx
    states that      you can specify a      
    /tempdrive:{driveletter} command line option
    Pointed to USB      drive designated as F and ran command as:
    C:\$WINDOWS.~BT\Sources\setup.exe      /runlocal /BTFolderPath:C:\$WINDOWS.~BT      /OSImagePath:"z:\Sources" /HideWelcome /uilanguage:en-US
         /targetlanguage:en-US /tempdrive:f
    Failure      message:
    "The specified drive [F:] does not meet all      requirements necessary to store temporary installation files
    Changed      command to point to internal D:Drive as:
    C:\$WINDOWS.~BT\Sources\setup.exe      /runlocal /BTFolderPath:C:\$WINDOWS.~BT      /OSImagePath:"z:\Sources" /HideWelcome /uilanguage:en-US
         /targetlanguage:en-US /tempdrive:d
    Upgrades      proceeds to successful conclusion.
    Malort

  • ADWS Broken after in-place upgrade from Server 2008 R2 to Server 2012 R2

    I performed an in-place upgrade from 64-bit Server 2008 R2 to Server 2012 R2.  This machine ran Active Directory Web Services. After the upgrade ADWS will not start. I get the following event log error:
    Log Name:      Application
    Source:        .NET Runtime
    Date:          11/21/2014 3:23:02 PM
    Event ID:      1026
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      COMPUTER
    Description:
    Application: Microsoft.ActiveDirectory.WebServices.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.ServiceModel.CommunicationObjectFaultedException
    Stack:
       at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
       at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
       at System.Threading.ThreadHelper.ThreadStart(System.Object)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name=".NET Runtime" />
        <EventID Qualifiers="0">1026</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-11-21T20:23:02.000000000Z" />
        <EventRecordID>65596</EventRecordID>
        <Channel>Application</Channel>
        <Computer>COMPUTER</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Application: Microsoft.ActiveDirectory.WebServices.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.ServiceModel.CommunicationObjectFaultedException
    Stack:
       at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
       at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
       at System.Threading.ThreadHelper.ThreadStart(System.Object)
    </Data>
      </EventData>
    </Event>

    I compared the registry with a working system but the Counters - and all other keys - looked fine.
    At the same time as upgrading a DC a colleague was updating an unrelated server, and he started to see similar events in the event log (but for the Dell OpenManage Essentials service, not ADWS). The error was complaining about KERNELBASE.dll which set my
    spider sense tingling. We knew that this server had Windows Updates pending. Fully updating it solved the problem on that server.
    I solved the ADWS problem in the end by fully Windows Updating the DC. In particular, the ADWS Service started successfully after installing KB2919355 and rebooting. That also
    'unlocked' a further 59 updates pending. 
    After the in-place upgrade I always fully Windows Update but I'm 99% certain that KB2919355 did NOT show up when I did a Check for Updates straight after a reboot so I thought the DC was up-to-date. I then spent hours investigating the ADWS problem and rebooted
    as part of the diagnostics. It was then that I noticed on the logon screen that there were updates pending...
    Moral of the story? Windows Update, then Update again, and again, and again. The length of time it takes to Windows Update after an upgrade from 2008R2 to 2012R2 is painful though.

  • In place upgrade from Windows Server 2000 to Windows Server 2003 ADS

    Hi...is anyone aware of any issues with performing an in place upgrade from Windows 2000 Server to 2003 Server, which is currently running ESSBASE? Please advise, if you have any information. Thank you.

    You can post your question in ESSBase forum
    Essbase

  • 'In place' upgrade from 7.8 to 8.1

    Hi!
    I'm kicking off some planning around an upgrade from 7.8 to 8.1 / 8.2 Public Sector. Aside from the repository and non-repository code item work, I've started to think about the logistics of upgrading the actual software. Our plan is to keep the phyiscal architecture as is, as it's more than capable of supporting 8.1. We're running completely on Win2K3 with an Oracle 10g back end DB.
    Has anyone performed an 'in place' upgrade from 7.8 to 8.1? That is, starting cutover with 7.8 running on a set of phyiscal servers and finishing cutover with 8.1 running on the same set of machines?
    I'm thinking along the lines of a 2 phase cutover, taking a weekend to install software, configure new components (such as BI Publisher, as we're replacing Actuate at this point) and doing as much 'zero impact' work as possible. This will be an outage weekend, where we take 7.8 offline to do any work and bring it all back up at the end. The second phase would be the database upgrade, SRF, repository and non-repository element deployment, along with bringing up the 8.1 system.
    I have a few obvious thoughts, such as installing Gateway and Server components on machines already running 7.8 versions. CFG and siebns settings should be kept distinct in different installation folders, but does Siebel store anything in the registry? I'm also aware that the Gateway and Component ports will be the same / conflicting, but this shouldn't be a problem if only one set of services are running at any given time.
    I'm also concerned that we cannot do the Gateway and Server installation and config without having an 8.1 database already in place. Is that the case? If not, I'm hoping we can get the installations and component group allocation and configuration done without affecting the 7.8 service. We can then take full server backups and be ready to 'just' do a database upgrade on the second cutover date.
    Anyway, I'd really appreciate any thoughts or experiences that you all may have or have had on such a plan.
    Thank you!

    Hi,
    From your message, I understand that you have 8 siebel servers and 2 for oracle database (Correct me if I am wrong). For the production environment you will need to remove all siebel components from at least one system each for gateway, siebel server and webserver. Do ensure that your database is properly backed up before proceeding with a db upgrade.
    Do note that removing one server each will be hitting your application very hard and hence it will be great if you proceed only during a long weekend or sometime giving you a good time duration to do the upgrade and do the system checks also. Also I would suggest to do siebel install and oracle db upgrade in one go. Please consult your db admin for the best way forward in this.
    Once your 8.1 installation is running do the import of all the integration points that you have for the older system and then verify their functioning with your installation. Only when everything you need appears to be working as per the previous system, shut down the older system and remove existing Siebel components and do the necessary installations.
    You may like to see this site "http://download.oracle.com/docs/cd/B31104_02/books/SiebInstUNIX/SiebInstCOM_InstGateway3.html" , "http://download.oracle.com/docs/cd/E05553_01/books/SiebInstUNIX/SiebInstCOM_InstSiebSrvr3.html" and "http://download.oracle.com/docs/cd/E05553_01/books/SiebInstUNIX/SiebInstCOM_InstSWSE3.html" for pointers in case you are not comfortable removing siebel server components from your production environments.
    With Regards,
    Tanmay Jain

  • In-place upgrade from windows 2008 R2 to windows 2012

    Hi all,
    we are currently running SAP ERP EHP7 (Netweaver 7.40 ) on Windows 2008 R2 server, MS SQL 2012 database.
    Is it possible to do in-place upgrade to Windows Server 2012?
    We want to do upgrade without buying new hardware  and perform system copy.
    Regards

    Hi,
    the only note where we discussed our findings about in-place upgrades of the Windows operating system is SAP Note 1494740.
    Even though the upgrade to Windows Server 2012 is not discussed explicitly, the note is also valid for Windows Server 2012.
    The only thing you have to take care is: upgrade your system components (database, other 3rd party software) to versions supported on Windows Server 2012 before you are performing the in-place upgrade.
    Regards
    Peter

  • In-place upgrade from Server 2012 to 2012R2 "just quits"

    I have a TechNet subscription and am supposed to get "priority support" but I mistakenly asked my question in one of the forums that is not in the "priority support monitored" list. Included here by reference:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbbb34f2-e098-4f7d-b692-88e033869385/windows-server-2012r2-inplace-upgrade-from-2012-quotjust-quitsquot?forum=winserver2012r2previewsetup
    Short description: On the 2012 DataCenter machine which serves as my Hyper-V host, I mount the install media and launch Setup. It starts, copies the temporary files ($windows.~bt) and then just quits.
    Content of c:\windows\setupact.log:
    2013-10-11 10:29:04, Info                  UI     Determining whether we should run ConX or legacy setup
    2013-10-11 10:29:04, Info                  UI     Downlevel OS is server. Continue to run legacy setup
    2013-10-11 10:29:04, Info                  UI     Determining if we are in WDS/Unattend mode
    2013-10-11 10:29:04, Info                  UI     No need to hide autorun
    2013-10-11 10:29:04, Info       [0x0a000a] UI     Autorun:Autorun core successfully  initialized!!!
    2013-10-11 10:29:04, Info       [0x0a000b] UI     Autorun:Autorun UI successfully  initialized!!!
    2013-10-11 10:29:04, Info                  UI     AppWindow has layout style 0
    2013-10-11 10:29:04, Info                  UI     NavWindow has layout style 0
    2013-10-11 10:29:04, Warning    [0x0a0180] UI     Failed to change the UI language to en-US.
    2013-10-11 10:29:04, Info       [0x0a011c] UI     WizardDialogPost::SetActive
    2013-10-11 10:29:09, Info       [0x0a018e] UI     Passing command line parameter ("H:\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
    Would appreciate any suggestions that don't involve doing a detailed documentation capture of how the server is configured followed by a clean install, that is what I'm trying to avoid if possible.
    I am not trying to do anything special or scripted, just a standard OS upgrade.

    Hi Pepper, Malort, Robert and Brandon,
    I am experiencing the same issue using either new release (april 2014) or the gold release 2012 R2 DVD from Volume license (SA) download. Both confirmed working on other installations. Setup just suddenly quits with the same non existent logs
    files in $windows.~bt and c:\windows\setupact.log has a warning statement "Failed to change the UI language to en-US"
    The server is running as a vm and would otherwise appear to be running perfectly. It is a DC(GC), DHCP, DNS & CA for my site.
    Going to try System Update readiness Tool KB947821-v33.
    Heads up MSFP Anne, any word on the cause and/or fix?
    Regards,
    Andre
    Same here,
    trying to upgrade a server 2008 R2 server running on hyper-v to server 2012 R2 with update1.
    The server was a server 2008 and was upgraded to server 2008 R2.
    This is the only log i can found:
     2014-07-04 14:20:13, Info                  UI     Determining whether we should run ConX or legacy setup
    2014-07-04 14:20:13, Info                  UI     Downlevel OS is server. Continue to run legacy setup
    2014-07-04 14:20:13, Info                  UI     Determining if we are in WDS/Unattend mode
    2014-07-04 14:20:14, Info                  UI     No need to hide autorun
    2014-07-04 14:20:14, Info       [0x0a000a] UI     Autorun:Autorun core successfully  initialized!!!
    2014-07-04 14:20:14, Info       [0x0a000b] UI     Autorun:Autorun UI successfully  initialized!!!
    2014-07-04 14:20:14, Warning               UI     CLanguages::v_InitLanguage - Failed to load en-US resources with error 2. Will load fallback binaries
    2014-07-04 14:20:15, Info                  UI     AppWindow has layout style 0
    2014-07-04 14:20:15, Info                  UI     NavWindow has layout style 0
    2014-07-04 14:20:15, Warning    [0x0a0180] UI     Failed to change the UI language to nl-NL.
    2014-07-04 14:20:15, Warning               UI     CLanguages::v_InitLanguage - Failed to load en-US resources with error 2. Will load fallback binaries
    2014-07-04 14:20:15, Info       [0x0a011c] UI     WizardDialogPost::SetActive
    2014-07-04 14:20:16, Info       [0x0a018e] UI     Passing command line parameter ("D:\Sources\setup.exe /HideWelcome /uilanguage:nl-NL /targetlanguage:nl-NL") to IBS.
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0

  • In-place upgrade from Server 2012 to Server 2012 R2

    I have a Dell PowerEdge 1850.  I installed Server 2012 Standard. This works fine.  I made it a domain controller in an existing domain.  I also added Print Management Role.  This was working fine.
    I then did an in-place upgrade to Server 2012 R2.  Now it is stuck in a rebooting loop.
    It says "Your PC needs to restart. Please hold down the power button.  Error Code: 0x000000C4.  Parameters: 0x0000000000000091, 0x00000000000000F, 0xFFFFF803827DCA00, 0x0000000000000000.
    I cannot get out of this loop.  Others have said they have this problem when installing with virtualization.  However, I am installing on the native hardware.  The CPU does not support hardware virtualization.
    This worked fine with Server 2012.  In fact, I have 4 other Domain Controllers that are identical to this one running Server 2012.  Did Server 2012 R2 add a CPU feature check that is hampering this?  
    Don Demars

    The 1850 is a pretty old box.  What you are running into sounds like the lack of a proper disk driver for the box (I've had that happen multiple times during new releases).  The disk driver needs to be provided by Dell.  I don't believe Dell
    supports the 1850 with 2012 R2, so getting a driver for it might be a bit of a challenge.  You can find which servers Dell supports under the different versions of Windows Server by checking out
    www.windowsservercatalog.com.
    Microsoft only puts supported device drivers submitted by the vendors well ahead of time on the distribution media.  Seeing that you were able to get 2012 running on the 1850s earlier, my guess is that you had separate media for the driver that you
    used during the installation.  There is a place during the installation that allows the loading of device drivers that are not on the installation media.  If you can get Dell to give you a driver for 2012 R2 for the 1850s, maybe you can update the
    driver under 2012 and then update the OS.
    Personally, though, I never upgrade a domain controller in place.  It is so easy to simply create a new one and add it to the domain.  Then, if you do have a driver for 2012 R2, you can load it during the clean installation.
    . : | : . : | : . tim

  • I did an Unsupported InPlace OS Upgrade from 2008-R2 to 2012-R2

    Well, I misunderstood what was supported and upgraded the OS on a SCCM 2012-R2 server from 2008-R2 to 2012-R2. (The one and only SCCM-server in the site)
    All seems to work well, my concern now is what can I expect of future problems? Should I do the backup-install-restore procedure now to be sure or let it run until... "maybe something" happens?
    Thanks.

    "not supported" just means that MS did not test that scenario (and it does not automatically mean that it does not work).
    I've done such an OS upgrade in my lab and were running into some smaller issues (MP/DP/SUP = the roles that require IIS) and were able to fix them by removing and re-adding those roles but YMMV.
    The supported way would be: recover from backup. But you can also have a close look at all roles and see if they are still working.
    Torsten Meringer | http://www.mssccmfaq.de

  • Out place upgrade from 11.1.1.4 to 11.1.2.2. Please suggest.

    We are planning to do an out place upgrade. We are on 11.1.1.4 right now. And the plan we have come up with is, is to install 11.1.1.4 on new server, perform lcm migartion, and then upgrade 11.1.1.4 to 11.1.2.2. Is there anything wrong or is there a better approach to the one we are taking? Please suggest.
    Thanks,
    Tej.

    You can upgrade directly from 11.1.1.4 to 11.1.2.2 and they don't have to be installed on the same server.
    Everything is in the documentation - http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_1112200/launch.html
    If still is not clear then it may be worth getting someone in to discuss your upgrade options.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Certificate errors after upgrade from 2008 r2 to 2012 r2

    After upgrading a DC from 2008 R2 to 2012 R2, Outlook will no longer connect to outlook.office365.com.  This appears to be a direct result of the upgrade, worked before and failed after.
    I get a flurry of message boxes when I launch Outlook, and it will run but not connect.  No path through the messages (granting permission to ignore the error, or installing the certificate) makes any difference.  Not seeing anything in the event
    logs, and have no idea how to fix this.
    In addition, IE is now raising cert complaints on every site, doesn't matter which.  Firefox seems to be managing okay, for the most part.
    Thanks for any guidance.

    Hi Michael,
    I am so sorry for the delay.
    I was trying to find more useful information about this issue, though there are very little information other than installing the trusted root certificate which is provided by the KB
    article above.
    I would suggest you download a
    certificate chain and install it.  
    If this method still couldn’t help you solve this issue, since you are using third party certificate (VeriSign) for your organization, you can get more efficient support by contacting
    third party support services.
    More information for you:
    Installing a Certificate Chain for Communicator Web Access
    http://technet.microsoft.com/en-us/library/dd441378(v=office.13).aspx
    Have a nice day!
    Amy

  • BSOD after an in-place upgrade from Windows Server 2003 R2 to Window Server 2008

    Xylems92 wrote:Unfortunately, we cannot take this approach.We have to move to 2008 (not R2) due to a software that runs on this machine and is validated will not run on 2008 R2 and above. In order to keep validation, we can only do an inplace upgrade. If we choose to either purchase the software upgrade or revalidate the system, both approaches will cost $80k+. So i need this to work as an in place upgrade to 2008I feel your pain, but any company worth their salt will (meaning the vendor) should know that you cannot simply perform an in-place upgrade of a Server OS.
    Really the proper method is to backup everything, format and install Server 2008 (are you limited to 32-bit?), restore data/reinstall software. What's the reasoning for the upgrade? 2003 EOL or something else?
    Do you have a guarantee that the software will even work on...

    Hello everyone. 
    We seem to be having an issue when doing an in place upgrade on our windows 2003 R2 server to go to Windows 2008. Every time we try and do the upgrade, once the server reboots it blue screens with no real information. Just mentioned to try and do a check disk to check for hard drive issues.
    It gives us the option to go the earlier version of windows (back to 2003 R2) but nothing we have tried has succeeded so far.
    Does anyone have any suggestions?
    Regards,
    -Xylems92
    This topic first appeared in the Spiceworks Community

  • In-place upgrade from Server 2012 to 2012R2 is failing

    Hello,
    I'm trying tu upgrade a VM from Windows server 2012 to Windows Server 2012 R2, but the upgrade is failing with an error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation.
    Error code 0x80070522"
    The VM i'm trying to upgrade has SQL server 2012 and some related tools installed
    The VM is running on a Windows server 2012 Hyper-V host
    I have tried a few different installation media, downloaden from the MS licensing site and from MSDN, but all give the same problem.
    After searching for logs i found these relevant messages in C:\$WINDOWS.~BT\Sources\Panther\setuperr.log
    2014-07-15 11:25:10, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:25:10, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] Failed to get launcher layout, hr=0x80070002
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    // a lot of these kind of messages
    2014-07-15 11:27:55, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:27:55, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:24, Error      [0x0808fe] MIG    Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:32, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:32, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:43, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:43, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:31:35, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
    2014-07-15 11:33:25, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
    2014-07-15 11:33:25, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
    2014-07-15 11:33:28, Error      [0x0606cc] IBS    WIMApplyImage failed; hr = 0x80070522[gle=0x00000522]
    2014-07-15 11:33:28, Error      [0x0600a1] IBS    DeployImage:Image application failed; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:33:28, Error      [0x060082] IBS    Callback_ImageTransfer:Failed to lay down the WinPE image; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:41:11, Error      [0x0606cc] IBS    WIMApplyImage failed; hr = 0x80070522[gle=0x00000522]
    2014-07-15 11:41:11, Error      [0x0600a1] IBS    DeployImage:Image application failed; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:41:11, Error      [0x060082] IBS    Callback_ImageTransfer:Failed to lay down the OS image; hr = 0x80070522[gle=0x00000057]
    Can anyone help me with this issue?
    Regards,
    Tom

    Yes, domain admins are members of the local administrator group when the macine is joined to a domain, but the opposite is not true.  Local admins are not necessarily members of the domain admins group.
    . : | : . : | : . tim
    Tim,
    Yes i Understand that a local administrator is not always a domain administrator, but i think this has nothing to do with my problem.
    To be sure i have logged in to this server with the local administrator user and started the upgrade again. As expected I got the same error message, so this is nog a permissions problem.
    Can somebody who can help me to solve this probleem?
    Regards,
    Tom

  • In-Place Upgrade from Windows 7 Ent N to Windows 8 Ent N not working

    I have spent the better part of 2 days trying to get Windows 7 Enterprise N to upgrade to Windows 8 Enterprise N with no results.  The error message I receive after selecting the upgrade option and the subsequent compatibility check is:
    Windows 7 Enterprise N cannot be upgraded to Windows 8 Enterprise N. You can choose to install a new copy of Windows 8 Enterprise N instead, but this is different from an upgrade, and does not keep your files, settings, and programs. You'll need to reinstall
    any programs using the original installation discs or files. To save your files before installing Windows, back them up to an external location such as a CD, DVD, or external hard drive. To install a new copy of Windows 8 Enterprise N, click the Back button
    in the upper left-hand corner, and select Custom (advanced).
    I have tested both production and MSDN copies of Windows 7 Ent N > Windows 8 Ent N and neither will upgrade.  Per MS documentation, I SHOULD be able to upgrade.  I've found nothing regarding this via search engine except one person having the
    same issue when Windows 8 was still RTM.  However, no one replied back to him.

    ForcedToCreateThisProfile,
    The Windows 8 and Windows 8.1 Upgrade Paths page show what versions of Windows 7 can be upgraded in place to Windows 8.  According to the page, the only versions of Windows 7 that
    can be upgraded to Windows 8 Enterprise are:
    Windows 7 Professional (Volume License)
    Windows 7 Enterprise (Volume License)
    Windows 8 (Volume License)
    As you can see, there is no mention of any N Edition of Windows having the capability to upgrade in place.
    I hope this helps!
    Mike
    Windows Outreach Team – IT Pro

  • In Place upgradation from 2008 to 2008 R2

    Hi,
    If we do inplace upgrade, no need to restore backups, logins and other scheduled jobs?
    Am I right?
    Thanks
    Shashikala

    Yes, you can migrate existing databases and configuration settings from an earlier SQL Server version, and apply them to an instance
    of SQL Server 2008 R2. (from BOL)
    more info:
    How to: Upgrade to SQL Server 2008 R2
    sqldevelop.wordpress.com

Maybe you are looking for