In-place upgrade Windows 2008 to 2008R2 and effects on SharePoint

I have a SharePoint farm, with a WFE running on Windows 2008 64 bit. THe APP and SQL server both use 2008R2. It's a complicated setup, with many custom applications. Rather than a fresh install, we would prefer to maintain our current applications and configuration.
Can I perform an in-place 2008R2 upgrade? Will it affect SharePoint? The Farm?
Backup strategies?
Thanks,
Scott

Hi Scott,
Operating System in place upgrade is NOT supported with SharePoint 2010. It is recommended that building a new Win2008 R2 and restoring a backup of your SharePoint 2010.
For more information, you can have a look at the blogs:
https://social.technet.microsoft.com/Forums/en-US/8c638ca6-0edf-4d5d-a443-3841cb64f673/inplace-upgrade-from-windows-2008-to-2008-r2-breaks-sharepoint-2010?forum=sharepointadminprevious
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

In place upgrade Windows 2008 and SQL 2008

Hi all,
We are planning to upgrade to Windows 2012 and SQL 2012 , can we take this in-place upgrade path in the following order ?
Setup 1 Host with 2 VM's running Windows 2008 R2 on Host and Windows 2008 R2/sqL 2008 on VM's.
1. Host1(running 2 VM's) - In-place upgrade windows 2008 R2 to windows 2012 R2
2. VM1 on host1 - In place upgrade windows 2008 R2 to Windows 2012 R2
3. VM2 on host1 - In place upgrade windows 2008 R2 to Windows 2012 R2 (AD Server)
4. SQL running VM1 - In place upgrade SQL 2008 with DB/reporting services to SQL 2012 DB/reporting services
All Servers ( including Host and VM's) are stand alone in a workgroup setup.( except one VM a stand alone AD server by itself).
Thanks for your help.

Hi,
If you want migrate from windows 2008r2 to windows 2012r2, you must install windows server 2008r2 sp1.
http://technet.microsoft.com/en-us/library/dn303416.aspx
For the host 1 upgrade, please refer to the following:
http://blog.powerbiz.net.au/server-2012/in-place-upgrade-from-windows-server-2008-r2-to-windows-server-2012/
For the SQL in-place upgrade, i think you may need to ask in SQL forums:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlservermigration
Hope this helps.
Regards.
Vivian Wang

Upgrade Windows 2008 R2 sp1 on an Exchange 2010 SP3 server

I have looked high and low for an answer to this question:
1. I have Windows 2008 R2 running Exchange 2010 SP3
2. Can I upgrade Windows 2008 R2 to SP1 with Exchange 2010 SP3 onboard?
3. Are there pre-requisites for doing this?
4. If so, where can I get the documentation?
I have spent hours looking through Google and Technet. Lots of information about compatibility of 2008 R2 and Exchange SP1 and SP2.
Your wisdom and experience would be appreciated. Thank you!!
Charlie

Hi,
"Can I upgrade Windows 2008 R2 to SP1 with Exchange 2010 SP3 onboard?"
Yes, you can.
"Are there pre-requisites for doing this?"
There is no pre-requisites, however, as what Idan Vexler mentioned above, downtime is required.
"If so, where can I get the documentation?"
Here are two related threads for your reference.
http://social.technet.microsoft.com/Forums/en-US/1093a91d-aed8-4c91-b538-ca82f5860523/upgrading-windows-2008-r2-enterprise-to-sp1-on-exchange-2010?forum=exchange2010
http://social.technet.microsoft.com/Forums/exchange/en-US/0a7f29a2-04a5-485f-9b0c-061f89b311a5/installing-windows-2008r2-sp1-on-exchange-server-2010?forum=exchange2010
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server

im my environment we are trying to upgrade from server 2k3 to 2k8, out testing done on server 2k3 to 2k8, but can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server ...kindly suggest
Nitin Gaurav
[email protected]

Yes you can. If you have two 2003 AD servers currently and upgrade one of them to 2008 AD then they'll continue to be able to work together. The domains functional level will remain as 2003 across both servers so at this stage you won't get any benefit from
the new AD functionality available in 2008.
Once you've then upgraded the second 2003 server to 2008 you can then upgrade the functionality levels in AD to make it 2008. It's been a while, but I believe it doesn't happen automatically, so once all AD servers have been upgraded you have to go into
AD and upgrade the functionality levels yourself.

FIM 2010 R2 Sp1, Windows 2008 R2 SP1 and Recycle Bin issues

Hi,
We are running FIM 2010 R2 Sp1 (build 4.1.3613.0)
Also running Windows 2008 R2 Forest and Domain functional level environment. (Windows Server 2008 R2 SP1 on all DCs). The previous Recycle Bin hotfix https://support.microsoft.com/en-us/kb/979214/ fails to install since we are already running WS08 R2 SP1
on all the DCs.
During deprovisioning, when a user is deleted from the source HR system, FIM deletes the object from AD, FIM Sync & Portal.
FIM also manages a FIM Portal group, where membership is assigned manually. This membership is then updated in AD.
When a user (who is part of this group) is deleted in HR, FIM deletes it from AD, FIM Sync, FIM Portal, FIM also removes user from FIM Portal group. The user is also removed from the AD group (by FIM group object membership attribute flow to AD)
...however, on the next AD Export, FIM fails to update the same group and complains about this very same user (CD Error) and lists the user as: CN=username\0ADEL:GUID, CN=Deleted Objects,DC=domain,DC=com
It appears that there is a problem with FIM and the Recycle Bin again?
Are there any new Recycle Bin/FIM hotfixes ?
Thanks,
SK

May I suggest you review the following:
Is the AD MA user account part of the Domain Admins group? If yes, please remove it from this Group
Verify that the "CN=Deleted Objects" container has not somehow been included in the AD MA OU scope

In place upgrade Windows 2003 to Windows 2008 R2 fails, how to troubleshoot?

Hello,
I'm upgrading in Below is setuterr.log 2014-07-21 15:44:29, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:47:51, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:53, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:57:06, Error place Windows 2003 R2 to Windows 2008 R2 and upgrades rolls back on it's own with no indication for reasoning.
which is full of errors but I can not figure out which specific one is curlpit. Any ideas?
Number of Enumerated Devices = 6[gle=0x00000103]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=00000002x[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
[0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08071d] MIG Mig::CDownlevelOCStore::AddOCsFromManifests: Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man.: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x0808fe] MIG Plugin {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}: BthMig: Failed to migrate bthport keys, bailing out
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x0803db] MIG IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\sankap\NTUSER.DAT; giving up (2).[gle=0x00000003]

Hi,
Most probably these kind of errors pop up if the drivers are not compatible. Do you find any .dmp files under folder C:\$WINDOWS.~BT\Sources ? If so
open it with debugger and check for the affected .sys file name.
Check the DVD media, or try a different media.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/691bb048-f63f-41fd-a152-e502671fb27e/upgrade-to-from-windows-server-2003-r2-x64-to-windows-server-2008-x64-failed-4-times-so-far?forum=winserverMigration
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Upgrade sql server 2008 to 2008R2 and apply Service pack 3

Hello,
I have a two node cluster (sql server 2008). I would like to upgrade to SQL Server R2 and at the same time would like to patch to Service Pack 3. What would be the best way to accomplish this task with minimal downtime to the users?
This is my plan:
1. Detach any read only databases.
2. Upgrade to 2008 R2 (shared feature only) on passive node (node1).
3. Apply SP3 on passive node in step 2.
4. Swith active node to passive node (node2).
5. Upgrade to 2008 R2 (shared feature only) on node2.
6. Apply SP3 on node2.
7. Upgrade db (instance) on node2 to 2008 R2.
8. Upgrade db (instance) on node1 to 2008 R2.
9. Re-attach read only databases.
Is my procedures correct?
Thank you.

Hello,
Have you seen the following article before?
http://msdn.microsoft.com/en-us/library/ms191295(v=sql.105).aspx
You can slipstream SQL 2008 R2 + SP3.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Upgrade Windows 2008 R2 Standard to 2008 R2 Enterprise fails

Hi,
I am trying to perform an in place upgrade from Windows Server 2008 R2 Standard to Enterprise. I want to setup some things with failover clustering. The install goes all the way to the last step where it is transferring files and then it hangs. This server
is in my home and I don't have a plethora of servers to play with so I need to upgrade. This server is an HP ProLiant ML330 G6. My other server is a DL385G2 running 2008 R2 Enterprise. They are different because I was scouring eBay and pounced when a deal
came up. :-)
This server is a DC and it is running:
DHCP
DNS
Exchange 2010
MS Forefront Security
Print Server
DFS Namespace
DFSR (I have a second server that it replicates with)
All HP services (But I disable them for the upgrade)
I suspect that it is failing on a print driver but I am not sure. I disabled all non-MS services from boot. I also added the system environment variable with the iphlp dll. (can't recall it right at this moment)
The way I have been doing this is to power off the server, break the RAID 1 O/S mirror by removing 1 of the drives, power up and run the upgrade. If it fails, I power off, insert the drive I removed and pop out the "upgraded" drive. Boot up, pop
in the failed upgrade drive and let it rebuild.
Any thoughts? The last time it failed I let it back out the upgrade and I copied off a bunch of the setup log files before I restored the previous mirrored drive.
I am also contemplating upgrading this server to 2012 R2. Would using my RAID 1 method above work? I don't know if the upgrade will change something with the server's computer account therefore not allowing me to revert to 2008 R2.
Lastly, I know that I shouldn't have all of these services on one server, but this is in my home and not a work environment. It runs fairly flawlessly.

Hi,
In addition to Dave Patrick, what is the error message when you upgrade failed?
Meanwhile, please check this article:
http://blogs.technet.com/b/server_core/archive/2009/10/14/upgrading-windows-server-2008-r2-without-media.aspx
It seems like the server can't be a DC at the time of upgrade. If you demote a DC using dcpromo, you can upgrade, then re-promote it.
Regards.
If you have any feedback on our support, please click
here
Vivian Wang

Domain Controller upgrade windows 2008 r2 to windows 2012

I currently have 3 windows 2008 r2 domain controllers. 1 physical and 2 virtual. I am looking to see what the best upgrade path would be. the physical is the primary and has dhcp and dns services
Stonecold31666

See this,
http://social.technet.microsoft.com/wiki/contents/articles/16797.upgrade-to-active-directory-2012.aspx
Regards
Biswajit Biswas
My
Blogs|TechnetWiki
Ninja
Best regards Biswajit Biswas Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin

Windows 2008 R2 cluster and FTP-connection

Hi,
We have windows 2008 r2 server cluster. There is a resource which is connected by the third part
via ftp. When they establish the connection, there is configured ip-address to certain node.
When we manage cluster, it might happen that the resource is left on the other node and when they
establish next time the ftp-connection, it says that can't connect. I've made similiar usernames with
similiar passwords on both nodes.
Is there a possibility to configure the environment so, thta ftp-connection is not depend on which
node the resource is?
Br, Petteri

Hi Peter Castle,
When you want to keep the session on one server you must use the Single Affinity option.
The related KB:
Specifying the Affinity and Load-Balancing Behavior of the Custom Port Rule
http://technet.microsoft.com/en-us/library/cc759039(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 2008 64 bits and BO XI 3.1

Bonjour,
Que faut il faire pour installer BO XI sans problème sur un serveur windows 2008 64 bits virtualisé ? paramètres,composants 32 bits à installer ou à paramétrer ??
Merci de votre réponse
Cordialement
F. Bedouin
02.23.21.76.54

Hi Francoise,
You should be aware that SDN forums are English spoken forums.
I don't know BO products and so cannot help you but I suggest that you rewrite your question in English for a better chance to get a useful answer.
Regards,
Olivier

Slow printing on windows 2008 std, R2 and windows 2012

Hi All,
I have a print server which is configured on windows 2008 R2. We are experiencing slow printing when printing directly from the server or from a client through the server. Small sized files prints fast, anything which has image takes a long time. All the
printers in our organization are Xerox Colorqube 9303. When installed the driver directly on to windows 7 32 bit PC, it prints without any delay. Also, when prints from the server a 2 MB file becomes 15 MB or more while sending. We have tried PCL6 and PS drivers.
To replicate it, i have installed a windows 2012 server ended up with the same result. Installed windows 2008 standard 32 bit with SP2 and the result remains same. Also tried it on windows 8, 64 bit without any luck. So effectively, it works fine only when
directly installed on a windows 7 PC. I have disabled all three: disabling TCP Chimney Offload, RSS, Receive Window Auto-Tuning .
After shooting the print, if you observe the printer properties, it sends data at a very low rate which results a 10 MB documents prints take around 10 minutes. At the same time, file copying from the server to and fro is working normally. All these servers
are directly connected to the cisco 6509 core switch. All the above tests were performed on the same physical switch. The server and clients are on the same network (subnet).
Have anybody come across to a similar issue. Any useful suggestions would deeply appreciated.
Thanks,
Prince Mathew

Hi Prince Mathew,
Based on your description, this issue seems that it’s related to this specific model printer (Xerox
colorqube 9303). Please install the latest version of the driver and the firmware from Xerox website, and then check if this issue still exists.
If it still persists, please clear Printer Spooler Files and enable the Spooler Service again.
For details, please refer to.
1. Click Start, run "Services.msc" (without the quotation marks).
2. In Services list, please double click "Printer Spooler". Then click
Stop, and then click OK.
3. Please locate to: "%WINDIR%\system32\spool\printers", delete all files in this folder.
4. Click Start, run "Services.msc" (without the quotation marks). In Services list, double click
"Printer Spooler". Click on Start. In the Startup Type list, make sure that "Automatic" is selected and click OK.
Then check if this issue can be solved.
Hope this helps.
Best regards,
Justin Gu

Windows 2008 64-bit and Microsft ODBC for Oracle problem

Hello,
I am trying to create ODBC connection to Oracle 9i Database on remote server. I am using Windows 2008 64-bit but it is not showing Microsoft ODBC Driver for Oracle. Could any one suggest what to do?\\
Thanks

GQ wrote:
Hello,
I am trying to create ODBC connection to Oracle 9i Database on remote server. I am using Windows 2008 64-bit but it is not showing Microsoft ODBC Driver for Oracle. Could any one suggest what to do?\\
ThanksInstall the Oracle client and use the Oracle driver. You're going to need it whether you use the MS driver or Oracles. ODBC drivers do not work apart from the client of the underlying database product.
When you do the install, you will need to do a custom install and specifically select for the Windows components.

Windows 2008 Licensing - Standard and Enterprise Edt - No of License required

Hello All ,
We have a Windows Environment running on VMware (ESXi5.1), running Windows 2008 Standard and Enterprise platforms . We are working on the no of license that is required for each category . Can you help us in licencing calculation for each environment
.Below is the split
Windows 2008 R2 Standard Edt.
ESX Cluster 1
Total No of ESX Hosts :4
Total No of Windows 2008 R2 Std Edt VMs : 9 // How many license req ? Calculation
Total No of Windows 2008 R2 Ent Edt VMs : 6 // How many license req ? Calculation
ESX Cluster 2
Total no of ESX Hosts : 3
Total No of Windows 2008 R2 Std Edt VMs : 13 // How many license req ? Calculation
Total No of Windows 2008 R2 Ent Edt VMs : 6 // How many license req ? Calculation
Appreciate your support

Hi Sathish,
I would recommend you to contact the Microsoft Volume Licensing Service Center at the following
Microsoft website. They are the experts and can guide you with the proper license requirments.
https://www.microsoft.com/licensing/servicecenter/
Find your local Volume Licensing Service Center support contact information below. Select your country from the drop-down list and the correct Support Center will
be displayed at right.
https://www.microsoft.com/licensing/servicecenter/Help/Contact.aspx
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Scanning from Windows 2008 Scan Manager and an HP 8500 A909A

I am trying to set up a Scan server on Windows 2008 R2 and can not get it to recongnize my HP8500 A909a MFP. I can print to it from the Print Server (via the network), but not scan from it from the Scan Server.

Same problem here. Got it to scan by logging into printer ip.

In-place upgrade Windows 2008 to 2008R2 and effects on SharePoint

Similar Messages

Maybe you are looking for