In portal 9i, removal of folder display name link

hi all,
i need to know, how to make the folder display name not a link.
by default display name comes as a link, which points to the particular content area , the folder uses.
--archana

Hi Samer_asn,
I am trying to do exactly what you did.
Can you tell me how you could retrieve the word doc from blob and show it in a portlet when a user clicks on a link
Thanks in advance
Jay

Similar Messages

How to remove a folder and some links from start-menu

Hi!
An application (Kaspersky Antivirus) is installed on quite
some Win2K-SP-Workstations by the Kaspersky Administration
Kit (with its own installer).
With this installation an entry to the start-menu is made
and this entry shall be removed by Zfd 3.2-SP3. I ran
through some tests with an application-object (run as secure
system user), which only intent was to remove this entry.
First I tried by "Distribution Options - Application Files"
to remove the folder "C:\Dokumente und Einstellungen\All
Users\Startmen\Programme\Kaspersky Anti-Virus 6.0 for
Windows Workstations". Then I tried a "Distribution Script"
with "RD /S /Q "C:\Dokumente und Einstellungen\All
Users\Startmen\Programme\Kaspersky Anti-Virus 6.0 for
Windows Workstations"", which also failed.
Do I miss something? Where could I check the results of
those tries to get a better feeling on what is going wrong
here?
Thanks in advance.
Karl

When doing the job with an *.bat-file it works, when going
with the distribution script it does not. Are all the
windows/dos/batch commands available in the distribution
script option?
Karl
>>> Rolf Lidvall<[email protected]> 25.03.2009 11:37 >>>
>> Does that mean that, in case there are some files in
>that
>> folder, I have to delete those files first?
>
>Yes.
>
>> Can this whole
>> procedere be done by one app-object with keeping the
>order
>> like delete files first and then the folder as last
>thing?
>
>I think it's safest to do that with a script. I'd use the
>distribution
>script option.
>
>
>Regards
>Rolf Lidvall
>Swedish Radio (Ltd)

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Project Server 2010 - Updated User Profile - Display Name is Old Name

Similar to question"It shows the Domain\Logon account instead the User Name (up right corner)" but not quite the same. I also checked on the related topics list and could not find a solution.
We have a Resource in Project Server 2010 whose name changed. This included a change to her loginID as well as her email address. I went in to PWA > Server Settings > Security > Manage Users and changed the
Name, Email Address, and User Login Account fields accordingly. When the user goes into Project Server or any of the Project Sites, her old User Name is reflected. If she accesses any other SharePoint site (not associated with Project Server) her
new name shows up in the upper right hand corner of the screen.
We do not have AD Synchronization turned on.
How can we edit the name that appears in the upper right corner of the screen?

Hi,
Use Display name shown on right hand site is not from PWA, its from SharePoint User profile. When we make change to user display name, sometime SharePoint Still retain the old account and also add new account. To fix the issue we have to remove the user
profile from PWA root site.
Open PWA and navigate to following path
Site Actions>>Site Settings>>People and Groups
Click on More from left hand site list of groups
Select appropriate group, belongs to the user
Select the user and from Actions tab remove the user. (you may see two entries old and new), Either you can delete both or click on each account to validate correct user ID.
Once again navigate to PWA>>Server Settings>>Manage User
Edit affected user and click on Save
Have user log on to PWA and validate the result.
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful; if a post has been useful to you.This can be beneficial to other community members reading the thread.

How can I customise Thunderbird message columns to show sender raw address (not display name) and the "Received for" email address that was used to reach me?

I find it increasingly important to be able to see a sender's actual email address rather than just display name, as they usually don't show a company name - which a domain always would. Is there a way to customise settings/write a script/tweak files to add raw email & domain name columns? When dealing with a number of people at the same company it is hard to order or glance through a list of emails to find them. I also know 2 people with the same name at different companies and it is impossible to distinguish!
Secondly, as a related column addition, since a number of email aliases reach me it would be useful to have a column to show the "Received..for" part of the message source which reveals the actual email used in the To/CC/BCC which led to me. Again can this be tweaked or scripted?
I have programming experience but have not made add-ons and would be open to a suggestion which involves creating a custom add-on if adding columns with custom values is possible that way.
Best Regards,
Drew

Extended message headers can be searched from Edit/Find/Search Messages, or the folder context menu, by adding custom headers to the search criteria. So, you might be able to create a search on specific properties of a message.
The method of adding custom headers to searches is the same as the one described here for filters:
http://kb.mozillazine.org/Filters_(Thunderbird)#Custom_headers

How to change the Group Display Name in the UME?

Hello experts,
from time to time due to reorganisation our departments group names change.
So far this was a big deal because it is not possible to change the Display Name of a group created in the Portal´s UME?
So far a new group with the department name has to be created and all group members have to be connected to the new group again. This is not a convenient way..
Is there a way to configure the UME to allow to modify the Display Names of Groups?
Thanks in advance.
Thomas
Edited by: Thomas Krynicki on Jan 19, 2009 5:15 PM

Thank you for the quick answer.
However my problem is still not solved.
I am using the portal groups also as permission objects for KM. That´s why I do not want to create a new group because the new one will not appear in the ACLs of the KM Objects.
For me it is important to modify the Display Name of an existing Group. The GroupID shall not change. The new Display Name should be updated then automatically in the ACLs of KM Objects in question.
By exporting the group data:
[group]
gid=TeamA
gdesc=All members of Team A
user=member1, member2
There is no parameter for changing the Display Name of the group. There is only the Description Parameter.
So far I didn´t find any solution.
Any other ideas.
Thanks in advance.
Thomas

How to get the DISPLAY name for a page in 309

How do I get hold of the page DISPLAY name in Portal 309?
I need it for the purpose of created a custom greeting and page menu tree.
I can get the main internal name, but not the user friendly display name. It must be stored somewhere!
Regards,
John

Did you find an answer for this? I am attempting to do the same thing. I want to create a portlet with all available pages to a user. I can not seem to find the display name table.
[email protected]

Changing the display name of project file folders for TOC

I'm interested in changing the display names of the project file folders for my TOC. For example, I want to name the folder "01-intro" so that it is short and lowercase. But I'd like the TOC to say "Introduction to the System." I know I can manually rename the folder in the TOC either through its properties or by right-clicking => Rename, but I auto-create the TOC occasionally and I don't want to have to rename every folder every single time.
Does anyone know if there is a way to set a persistent property for the folder so that its display name in the TOC is different? I am using RoboHelp 9. I saw an option called "Detail" in the properties of the WebHelp layout in RoboHelp 8 that seems like it may have done that, but I no longer see this property in RoboHelp 9.
Any assistance would be much appreciated. Thank you.

I think the lack of response confirms that if you are going to use Auto Create, you have to accept the way it is.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to remove a folder from iphoto?

hi, i imported all my picture folders to iphoto and now trying to remove a folder from iphoto, just don't wanna see it there but i still want it in the system.
any ideas?
thanks,
tk

Ok, I am new too mac, so learning all this too but here is what i found to delete a folder out of iPhoto but not delete it from your HD.
My scenerio. I importated all my pictures from the "Pictures" in the "Favorites" within Finder. Unfortanutely, there were some iChat icons within the picture folder that i didn't want in iPhoto. What i found was that when i delete the pictures from iPhoto that they do not get deleted from the location on the mac hard drive...yipee!!! Here are some more details for deleting the folder but not deleting them from their location.
Selet the "Photos" in the left panel of iPhoto...select the folder but not on the name, this will highlight all the photos, then open the folder and drag all the photos to the trash...empty the trash on the iphoto application...the folders will be moved to the mac trash...empty the mac trash to just clean up your mac trash if you want. You can check the original location of your imported folder to make sure the pictures are still on the HD before empting the mac trash...my guess is they are.
Hope this helps,
rhythmsurf

HT201317 Remove the "By user name" title in Photo Stream

Is there a way to remove the "By User Name" title displayed in the upper right-hand corner of a shared Photo Stream? I sell stuff online and I would like to use the Photo Stream to post photos of, let's say, a furniture set. However, I'd like to maintain a little privacy by not having my first and last name displayed in the shared Photo Stream page.
Is there a way to do that, or would I have to change my profile name entirely to something like Furniture Master, so that iCloud displays that instead?

I don't think Photo Stream is for commercial use.

Display Name of App - French works, English doesn't

Hey guys,
I've done a LOT of searching on this forum and stackoverflow, because I'm having a problem localizing the display name of my app. I've found threads like this one (https://discussions.apple.com/message/8185295#8185295) and followed the advice. I have two InfoPlist.strings files, one for english and one for french. The contents of the english one looks like this:
CFBundleDisplayName = "EnglishName";
CFBundleName = "EnglishName";
And similar but french strings in the french file, of course.
I have the "Localization native development region" set to "English" in my plist file, as well as "Application has localized display name" set to YES. I also removed "Bundle Display Name" from my plist file, though I've also tried it with it there.
Nothing works in english. When I set the device to french, I see the localized french name of the app just fine. But when I set the device to english, I see the Target name of the app under the icon.

I hit the wrong key, and the post was posted before I was ready.
Part two:
So how do fix this? The english name shows up sometimes, and I think it's solved. But then it always reverts to the Target name.
Any help would be greatly appreciated.
henning

Change DISPLAY NAME

I install this messaging :
Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
libimta.so 6.2-8.04 (built 19:20:35, Feb 28 2007)
SunOS sunmail 5.10 Generic_125101-01 i86pc i386 i86pc
My problem is:
When user send email to internet user ( ex: yahoo.com or gmail.com etc. ) the messaging. must change the DISPLAY NAME with other DISPLAY.
ex: from: Giovanni <[email protected]>
on
from: External Mail <[email protected]>
I try with CONVERSION channel but it's change only body of mail.
### mappings
CONVERSION
IN-CHAN=tcp_*;OUT-CHAN=tcp_*;CONVERT Yes
### Conversion
! Append disclaimer to single part messages if the body part
! is text.
in-channel=tcp_*; out-channel=tcp_*;
in-type=text; in-subtype=*; part-number=1;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=0;
command="/opt/iplanet/sitescripts/change.sh footer.txt"
! Append disclaimer only to the first part of a multipart message
! if that part is a text message part. (part-number=1.1 is the
! first part of a multipart message).
in-channel=tcp_*; out-channel=tcp_*;
in-type=text; in-subtype=*; part-number=1.1;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=0;
command="/opt/iplanet/sitescripts/change.sh footer.txt"
### Script Change.sh
Change $MESSAGE_HEADERS
cat NEW_MESSAGE_HEADERS > $MESSAGE_HEADERS
But don't work.....
I try with reverse mapping but change only email address don't change display name
#### mappings
REVERSE
*|tcp_local|[email protected] $D$Y"NEW DISPLAY"[email protected]
I try with sieve filter but I don't know how change FROM.
### imta.cnf
tcp_local destinationfilter file:///opt/SUNWmsgsr/config/invia.filter
What is the correct way ? There are other way ?
It's possible change the Display Name ?
Thank's
Giovanni

Hi,
My problem is:
When user send email to internet user ( ex: yahoo.com
or gmail.com etc. ) the messaging. must change the
DISPLAY NAME with other DISPLAY.
ex: from: Giovanni <[email protected]>
on
: External Mail <[email protected]>
I try with CONVERSION channel but it's change only
body of mail. Correct, the conversion channel only deals with MIME body parts and not the email headers themselves.
I try with reverse mapping but change only email
address don't change display name
#### mappings
REVERSE
*|tcp_local|[email protected] $D$Y"NEW
DISPLAY"[email protected]
Haven't tried this myself but will take your word for it.
I try with sieve filter but I don't know how change
FROM.
### imta.cnf
tcp_local destinationfilter
file:///opt/SUNWmsgsr/config/invia.filterWith 6.3 you could use the deleteheader/addheader to remove the From: and replace it with something else - this ability doesn't exist in 6.2.
What is the correct way ? There are other way ?
It's possible change the Display Name ? Yes.
You can change the display name by using the PERSONAL_NAMES mapping table.
For example to change the following on outgoing email (via tcp_local):
From: Shane Hjorth <[email protected]>
to
From: What The <[email protected]>
1) Add the personalmap keyword to the tcp_local channel
2) Add the following mapping table to the mappings file:
PERSONAL_NAMES
*|[email protected] $YWhat$ The3) Rebuild config
./imsimta cnbuild; ./imsimta restart
This is all explained in the messaging server admin guide "Handling Personal Names in Address Header Lines".
Regards,
Shane.

Mail: Display Name in "To:" Field

Hi,
In the mail app To: field a display name is associated with an email address. For a particular email address I want to remove this association.
(apols this is difficult to explain).
I am a member of an email group called TriLondon (at) yahoogroups (dot) co (dot) uk. A while back I wanted to be able to send automated reminders to this group via iCal. As I remember at the time I added this email as part of my profile in address book. When I recieve a message from this group the from field displays "Steven Lord" (ie my name) and when I send to it the to field displays "Steven Lord".
This is now very confusing and I no longer want this associated. I have removed that email address from my profile in address book but still if I recieve an email or send an email to TriLondon (at) yahoogroups (dot) co (dot) uk it shows as Steven Lord in the to / from field.
HELP !! I'm pulling my hair out trying to fix this.
<Edited by Moderator>

I don't have to log in to send to this group.
Before any of this happened I could send an email to that group from Mail app on my mac. In order to be able to automatically send reminders to that group via iCal (I no longer need to be able to do this) I added an address to my profile in Address App. So I added the email address under my card in Address App.
That resulted in any mail being received from the above group being labelled as coming from me.. ie Steven Lord. It's annoying and I've finally decided to try and sort it out.
So...
In Address App I've removed the email address trilondon 'at' etc... from my card in there. However, within Mail app any email coming from that email address is still labelled as Steven Lord.

Skype name vs display name in chat

I have been in a group chat for a long time. There are several hundred members of the chat. I am not the administrator.
I have recently realized (as a result of some attribution problems relating to various messages on the chat) that Skype is mixing up Skype names and display names in the chat thread. With hundreds of members, this is more than annoying – it has already caused some friction.
In summary, a series of posts by some members show up with a mix of their Skype name and their display name. This can happen when their posts are only minutes apart. It does not happen with all members.
Does anyone have experience of this? Is there anything I or the administrator can do to fix it? I know I can set anyone's display name locally to whatever I like. I also know that adding them to my contact list might lock in the display name. But there are hundreds of members of this chat; I don't want them all in my contacts and I don't want to manually adjust them all!
Skype 6.15; Mac OSX10.8.5
Thanks for any insight!
Steve

Do you mind sharing a screenshot of where exactly you see this "(1)"? Please blur/remove any occurrence of private information on that screenshot. But that picture would tell a lot more about what we are dealing with here.

How Do You Rename the Magic Mouse's Actual Name (Not the Display Name)

Hi. The Magic Mouse's display name is Servant777 but it's actual name is really something like mouse no. 1 which I take was from the store that first paired the mouse to test it ( I usually have it tested first after buying things, not all the time but sometimes, can't remember, it was 3 years ago).
How do you kind of "reset" the Magic Mouse like it's the first time it's being used and paired. I've tried: disconnecting and removing it from the bluetooth preference as well the on in the Mouse settings. It'd be nice if there's some kind of reset but it doesn't change the actual name, only the disply name could be changed. Is there any Terminal command for this?
Thank you in advance. Have a great upcoming sunday mass/great weekend.
God bless,
Alvin

https://discussions.apple.com/message/20940155#20940155#20940155

In portal 9i, removal of folder display name link

Similar Messages

Maybe you are looking for