In portal it shows both status in bex it shows current

Hi experts,
Can anyone please tell me when i run sales order report it shows (current)Booked status in BW(BEX) but in portal it shows open and Booked status(it should show only Booked status).Thanks

Hi Rohit,
As per your suggestion i have removed high value from filter and then checkd CRMSUBTAB in ERP  it shows an entry CRS_MATERIAL_EXTRACT
Entries in ERP-table CRMSUBTAB
Client
User
Object Name Downloaded
Up-or downloaded
object class
Function Module name
CRM
D
MATERIAL
CRS_MATERIAL_EXTRACT
Also find the entries in CRM-table CRMSUBTAB
Entries in CRM-table CRMSUBTAB
Client
User
Object Name Downloaded
Up-or downloaded
object class
Function Module name
CRM
ADPTESTMBDOC
D
ADPTEST
ADPTST_EXTRACT_MODULE
CRM
ADPTESTMBDOC
U
ADPTEST
CRM_ADPTESTMBDOC_LOAD_PROXY
CRM
BUAG_MAIN
D
BUPA
CRM_BUAG_MAIN_EXTRACT_GUIDS
CRM
BUPA_MAIN
D
BUPA
CRM_BUPA_MAIN_EXTRACT_GUIDS
CRM
BUPA_REL
D
BUPA
CRM_BUPA_REL_EXTRACT_GUIDS
CRM
CMDOC_NOTIFY
D
CMDOC_NOTIFY
CRM_CM_EXTRACT_GUIDS
CRM
VEND_MAIN
D
BUPA
CRM_BUPA_MAIN_EXTRACT_GUIDS
After that i did material replication but it still shows block size 0

Similar Messages

  • Status of data in Bex query shows wrong date

    Dear Experts,
    The Bex qurey after sucessful execution, show the Status of data as old date i.e. feb 2012. but we observed that the data uplaod happens regularly and sucessful.
    we tried executing the same query using RSRT/Bex Analyzer/Portal. the results are same i.e. showing incorrect status of data.
    Note: The Bex query is built on BI Infoset which sources from DSOs and Master Data infoobjects, and  BI version is 7.0.
    Kindly please help for resolving the issue.
    Best Regards,
    Mannu.

    Hi Vijay,
    The data upload has happend today also and it is sucessful, the reporing status is available for requests from respective infoproviders.
    'Status of data' is not a filed. if it an information to tell the status of data in query result.
    Please find the following steps to find the 'status of data'
    go to RSRT->give the query name and execute-> now after query results-> go to last page-> you can find the 'status of data'.
    Best Regards,
    Mannu

  • SAP HANA Coud Portal is showing "HTTP Status 401 - Unauthorized"

    Hi ,
      After clicking SAP HANA Cloud Portal From Cloud Cockpit its showing "HTTP Status 401-Unauthorized". Previously it was working fine for me and i have created and tested some widget also.But now i am getting this error.Please help me on that.
    Thanks And Regards
    Syed Shadan Quaiser

    Hi Mahendran ,
    Thanks for the details.
    The host is hanatrial.ondemand.com
    I checked your account configurations on Cloud Portal and it looks correct.
    Did you change your trust settings on your account cockpit?
    Please go to: https://account.hanatrial.ondemand.com/cockpit >> Trust and make sure that the settings there are default ones.
    Thanks, Amit

  • Closed orders in R3 showing as open in BEx

    Hi,
    Good Day!
    So, I am trying to execute a report which shows me sales orders' status. I notice that few orders which are showing as completed in VA02 are showing as open in BEx report/BW.
    I had looked further into this and observed that the schedule lines are splitting in BW even if the order line item has only 1 schedule line in ECC.
    Now among these multiple scheudle lines in BW, few have status same as R3 status and few differ,
    Could anybody please throw some light on this as to  why the lines are splitting in BW?
    Also, I suspect this to be the reason that the orders are showing as open in report(based on the differing schedule lines)
    For tallying with ECC values, I have used VA02 tcode and VBUP table for status(overall delivery status and goods movement status)
    I am not very familiar with SD concepts, so if anybody can help me it would be great.
    Below is a screenshot showing an example order that is wrongly showing up in the rpeort. As you see, it has several schedule lines with different statuses(This order shows completed in Ecc)
    Thanks,
    Sadaf

    Hi Nagesh,
    Yes..I am using SD_O01 whcih has the keys sales ord, sales ord item, fiscvrnt and sched line.
    I am having two records with these as keys..1 with sched line '1' and the other with sched line '2'.
    The one with sched line '2' has overall del status as A(open)
    Theres only one line for each sched line in the DSO. Its a std one.
    The rpeort is built on a multi.
    The DSO feeds data to a cube which is used in the multi.
    I understand that the LOs bring in before and after image. The below screenshot shows the values i currently have in the PSA table for the error sales order.
    Below is the VA03 display
    So, here I have only one item for this SO which has only one sched line.
    Could  you please explain why i see 2 sched lines in PSA and that too few records have same keys(PSa screenshot)?
    Please help me understand hwo the PSA is getting populated with teh above shown records
    Thanks in advance.
    Sadaf

  • GL posting clearing item amount and do not show doc status on the header

    Hello,
    GL post clearing amount both side and increase the no of items in the GL balance display. Inaddition, these clearing line item document header does not show document status field.  I have another GL which does not post extra two lines and clearing item document is empty and header shows document status as A (cleared item).
    Could you let me know what the difference and what need to be changed to make it not to post clearing items + and - and show doc status.
    Both are same FSG and only difference tick mark not done for balance in local currency.

    Thanks for your reply...but thats did not work. As I said earlier, I have a Structure in my rows and 2 characteristics in my free chracteristics and in my columns I have a selection of key figures...
    What I want is when I drill down on one of my 2 free characteristics, I do not want to see rows with amounts (KFs) zero or space.
    RR

  • How to check "show vpn status in menubar" by .mobileConfig-file

    HI,
    I've created a .mobileConfig (or .networkConnect) file to automatically setup the VPN-connection for our users. Is there a way to also check the box "Show VPN status in menu bar" by this configuration? According to me it should be possible, I only can't find the right xml-tag to add to the config-file.

    Thanks Marvin,
    How could I capture the traffic from initiating peer so that I can figure out that UDP port 500 is blocked or not, with the help of wireshark...
    In my network ONT/Modem (having four ethernet port) is installed at both the end and from one of its port the router is connected at each side and IPSec VPN is configured between the router. to check the UDP port status, my question is, should i connect my laptop (running with wireshark) with one of the port of ONT and capture the traffice or is there any other way and how that traffice will tell me that port 500 is blocked or not?

  • Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
    As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
    Power off the AirPort by pulling the power cord
    Wait a minute or two
    Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
    Release the reset button and allow a full minute for the AirPort to restart
    Now try to configure the AirPort again.  If you continue to see the same symptoms as before, the AirPort will need to be replaced.

  • How do you have 2 Safari windows open and show both pages simultaneously on the monitor

    How do you keep open 2 Safari windows and show both pages on monitor?

    While in Safari with your first window open go to the File menu and select New Window. That will open the second window on which you can navigate to your second web page. Resize both windows to fit on your display.

  • Delivery Document has been created - showing the status of Being Processed.

    Hi All.
    I am facing the following typical problem.
    1. Sales order has been created - showing the status of COMPLETED.
    2. Delivery Document has been created - showing the status of Being Processed.
    3. Goods Issue document created successfully- showing status as COMPLETE
    4. Billing Document has created successfully - showing the status as COMPLETED.
    5. Customer Account got updated properly.
    Query: Despite of completion of SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT u2013 and accounting document is cleared why the outbound Delivery document status is showing as BEING PROCESSED.
    If I go T-code Vlo3n see document flow
    Delivery 5080789885 being processed.
    Go to VF03 document flow also it is showing
    Delivery 5080789885 being processed.
    Aditya

    Hi ALL,
    Further to my query I would like to clarify the following:
    It is happening since 2004 all Bom components status (Delivery being processed) all the BOM main items header status is showing completed.
    It not impacting the business, but suddenly user raise query SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT completed why still delivery showing as being processed.
    1. I have checked at SO level -- all the line items were delivered. ie: delivery, goods issue, billing completed.
    2. I checked the Header Level data completed and Item Level data being processed.
    3. If I look into the each item level also it is showing as being processed.
    4. Even the SALES ORDER HEADER LEVEL showing the status of Completed.
    5. Removed credit check in delivery.
    The only issue is OUTBOUND DELIVERY DOCUMENT: Status alone it is showing as ' Being Processed' -- surprisingly!
    Aditya.

  • How to show network status in top toolbar?

    how to show network status in top toolbar? Network preferences is there, but network status has disappeared on last reset of Airport Express, but may not be connected. Thanks in advance for practical help

    Interestingly, in my experience, using the method described above of unchecking the "Show Connected Servers" box in the Finder Preferences makes no difference in what I can put in the sidebar. I was able to move a sub-folder of a shared disk to the Favorites section of the Finder Sidebar, but nothing else. (i.e. I could not add the shard disk itself to the sidebar – either to the devices, favorites, or any other section, and I could only add a subfolder of the shared disk to the favorites section – not to the devices section or any other section). This was the same whether I had "Show Connected Servers" checked or not.
    I'm running OS X Mavericks, and the setup I have is with a previous generation Time Capsule (i.e. the short, square kind that you could buy before the most recent taller variety came out last year), with a LaCie 3 TB USB 3.0 external drive plugged into the USB port of the Time Capsule. I'm then accessing this network drive over WiFi. The differences in what I'm seeing may be due to some change they made in the way Mavericks handles these setups.
    I could also just be misunderstanding what you're saying, but I thought I'd add this in case anyone else gets similar results so that they'd know they're not alone. Let me know if I'm missing something here.

  • I updated my iPod and now, two movies, which were purchased in iTunes and have/show both HD and SD versions are no longer syncing to or playing on my iPod.

    I updated my iPod and now, two movies, which were purchased in iTunes and have/show both HD and SD versions are no longer syncing to or playing on my iPod.

    Which version of iTunes are you using?
    What is your iPod firmware number as shown in the iTunes summary page?
    Is there any error message when you try to sync the vidoes?
    Have a nice day!

  • In Message Monitoring Message showing holding status

    Hi
    Can anyone solve this problem.Its urgent for me.
    My scenario is IDoc->XI->FILE
    The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
    The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
    But in message monitoring in runtime workbench the it is showing following status:
    Adapter Engine
    <b>Holding</b>
    18.11.2005 05:42:09    
    CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
    MIIA_Create  
    BS_MANU
    I am in SP14.
    Also the output xml file is not getting created in the XI application server.
    Please let me know the solution.
    Thanks
    Debraj Roy

    Hi Debraj
    HOLDING is a status which occurs normally for EOIO (Exactly Once In Order), so your message is set to Holding means some earlier message has not gone through. So until those messages are through this message will be in HOLDING state.
    Have a look at this link which explains how to handle such scenarios.
    http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
    cheers
    Sameer
    Assign points if it helped you

  • Payment Card Order completely invoiced but in the order is still showing Overall Status as Blocked

    Payment Card Order completely invoiced but in the order is still showing Overall Status as Blocked

    Share the screen shot of payment card tab from that sale order.  Also what values are flowing in Status tab.
    G. Lakshmipathi

  • I thought I upgraded to Pro, but my account shows both Basic and Pro. How can I upgrade to Pro and cancel Basic without losing my forms?

    I thought I upgraded to Pro, but my account shows both Basic and Pro. How can I upgrade to Pro and cancel Basic without losing my forms?

    Hi Rochdr,
    You can use the following article to help you address this issue with your mail account in OS X:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Workflow attached to content type shows the status as 'Starting'

    Hi,
    I have developed a workflow to distribute documents from Drop Off library to different SharePoint libraries based on the content type that the document uploaded to.
    The drop off library has been configured incoming mail settings hence the documents would be on boarded to drop off library through e-mails. In this scenario, my workflow should be triggered when the document is on boarded through email.
    Another scenario, the user can upload the document to different content type manually and updates the respective meta data values. This scenario, my workflow should be triggered when the item updated.
    So, I have configured my workflow should run on the content types and trigger when item is created through e-mail and item is updated by manual.
    The document on boarded through e-mails are working fine as soon as the item is created.
    Issue:
    The workflow associated on a content type which needs to be triggered on item created is triggering as soon as the user uploads a document manually and shows the status as 'Starting'.
    The workflow associated on a content type which needs to be triggered on item modified is triggering as soon as the user updating meta data values after document is uploaded. Hence, throwing an error
    'cannot open a file from drop off' library exception when I try to read file using C# code as file stream bytes.
    Configuration:
    1. The content types are having mandatory fields which has a default values set.
    2. The document version settings are set as check out the document when editing the properties.
    Please help me to resolve this bug and let me know if you need more details.
    Also, let me know how can we cancel the workflow if it is in 'starting' mode.
    The workflow should run the document is onboardedwhen an item is created and

    Hi,
    According to your description, my understanding is that you want to get data from content type in JSlink.
    I suggest you can get the content type data in JSLink using JavaScript Client Object Model.
    Here are some derailed code demos for your reference:
    http://sharepoint.aspcode.net/view/635399286724222582163436/sharepoint-how-to-get-field-value-using-jsom-jslink-without-async-call
    http://sharepoint.stackexchange.com/questions/93777/how-to-get-contenttype-name-in-clientsidejavascript-jquery-csom-etc-in-editf
    Best Regards
    Zhengyu Guo
    TechNet Community Support

Maybe you are looking for